Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cornell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Magnetic forces in high-Tc superconducting bearings

In September 1987, researchers at Cornell levitated a small rotor on superconducting bearings at 10,000 rpm. In April 1989, a speed of 120,000 rpm was achieved in a passive bearing with no active control. The bearing material used was YBa2Cu307. There is no evidence that the rotation speed has any significant effect on the lift force. Magnetic force measurements between a permanent rare-earth magnet and high T(sub c) superconducting material versus vertical and lateral displacements were made. A large hysteresis loop results for large displacements, while minor loops result for small displacements. These minor loops seem to give a slope proportional to the magnetic stiffness, and are probably indicative of flux pinning forces. Experiments of rotary speed versus time show a linear decay in a vacuum. Measurements of magnetic dipole over a high-T(sub c) superconducting disc of YBCO show that the lateral vibrations of levitated rotors were measured which indicates that transverse flux motion in the superconductor will create dissipation. As a result of these force measurements, an optimum shape for the superconductor bearing pads which gives good lateral and axial stability was designed. Recent force measurements on melt-quench processed superconductors indicate a substantial increase in levitation force and magnetic stiffness over free sintered materials. As a result, application of high-T(sub c) superconducting bearings are beginning to show great promise at this time.

Moon, F. C.↗
NASA NTRS1992

Observations of 3-m auroral irregularities during the ERRRIS campaigns

In the late winter of 1988 and 1989, three NASA sounding rockets were flown through the auroral electrojet from ESRANGE (Sweden) as part of the E-region Rocket-Radar Instability Study (ERRRIS). Many ground-based instruments supported these flights, including the EISCAT, STARE, and CUPRI radars, as well as all-sky cameras, riometers, and magnetometers. In this paper the observations of the Cornell University Portable Radar Interferometer (CUPRI), which detected coherent backscatter from 3-m irregularities in the auroral E-region are summarized. Twenty hours of power spectra and interferometry data are available, and, during the 1989 campaign, three weeks of nearly continuous Range-Time-Intensity (RTI) and first moment data were recorded.

Sahr, J. D.↗
NASA NTRS1992

Papers presented to the International Colloquium on Venus

This volume contains short papers that have been accepted for the International Colloquium on Venus, August 10-12, Pasadena, California. The Program Committee consisted of Stephen Saunders (Jet Propulsion Laboratory) and Sean C. Solomon (Massachusetts Institute of Technology). Chairmen: Raymond Arvison (Washington University); Vassily Moroz (Institute for Space Research); Donald B. Campbell (Cornell University); Thomas Donahue (University of Michigan); James W. Head III (Brown University); Pamela Jones (Lunar and Planetary Institute); Mona Jasnow, Andrew Morrison, Timothy Pardker, Jeffrey Plaut, Ellen Stofan, Tommy Thompson, Cathy Weitz (Jet Propulsion Laboratory); Gordon Pettengil (Massachusetts Institute of Technology); and Janet Luhmann (University of California, Los Angeles).

Source record↗
NASA NTRS1993

Process membership in asynchronous environments

The development of reliable distributed software is simplified by the ability to assume a fail-stop failure model. The emulation of such a model in an asynchronous distributed environment is discussed. The solution proposed, called Strong-GMP, can be supported through a highly efficient protocol, and was implemented as part of a distributed systems software project at Cornell University. The precise definition of the problem, the protocol, correctness proofs, and an analysis of costs are addressed.

Ricciardi, Aleta M.↗
NASA NTRS1994

Dynamics of a split torque helicopter transmission

Split torque designs, proposed as alternatives to traditional planetary designs for helicopter main rotor transmissions, can save weight and be more reliable than traditional designs. This report presents the results of an analytical study of the system dynamics and performance of a split torque gearbox that uses a balance beam mechanism for load sharing. The Lagrange method was applied to develop a system of equations of motion. The mathematical model includes time-varying gear mesh stiffness, friction, and manufacturing errors. Cornell's method for calculating the stiffness of spur gear teeth was extended and applied to helical gears. The phenomenon of sidebands spaced at shaft frequencies about gear mesh fundamental frequencies was simulated by modeling total composite gear errors as sinusoid functions. Although the gearbox has symmetric geometry, the loads and motions of the two power paths differ. Friction must be considered to properly evaluate the balance beam mechanism. For the design studied, the balance beam is not an effective device for load sharing unless the coefficient of friction is less than 0.003. The complete system stiffness as represented by the stiffness matrix used in this analysis must be considered to precisely determine the optimal tooth indexing position.

Krantz, Timothy L.↗
NASA NTRS1994

Electron density measurements during the NLC-91 campaign

A Super Arcas rocket, MISTI B, containing DC and RF probes, was launched as a part of the PMSE (Polar Mesosphere Summer Echoes) Salvo during the NLC-91 (Noctilucent Cloud) campaign to measure electron density irregularities with high spatial resolution. Measurements of large and small scale structures in the electron density were made on rocket ascent and descent at the altitudes of 86.5 and 88.5 +/- 0.5 km corresponding to the two altitudes of strongest backscatter recorded by the nearby CUPRI (Cornell University Portable Radar Interferometer) radar. Power spectra of the fluctuations shows two different structuring and scattering mechanisms exist at altitudes only 1 km apart. Since the rocket apogee was 89 km, the rocket was in the height range 88.5 +/- 0.5 km for 30 seconds giving an unusual measurement of horizontal structure over a distance of 5.5 km. Using the simultaneous DC and RF probe measurements of electron depletions and sharp gradient in the lower layer, the role of aerosols in creating these depletions and gradients is speculated upon.

Ulwick, J. C.↗
NASA NTRS1995

Low-cost tubular antenna deployer for WISP-2

A new tubular boom deployment mechanism has been designed, built, and flown as part of the second Waves In Space Program (WISP-2) through Cornell University. For this program, two booms were needed to form a dipole antenna but existing units were found to be too complicated and costly. A low-cost alternative was developed which combined flight-proven tubular boom technology with a new support and deployment mechanism. The simplicity of this new design was a major factor in providing a highly reliable and cost-effective system.

Warden, Robert M.↗
NASA NTRS1994

NLC-91: An experimental study of the polar summer mesosphere

In the summer of 1991, a major scientific campaign (NLC-91) involving 31 rocket flights was conducted from ESRANGE, Kiruna, Sweden and from Heiss Island, Russia to investigate the chemical, dynamical, and electrodynamical properties of the polar summer mesosphere. The rocket flights were also coordinated with two coherent radar facilities, EISCAT (European Incoherent Scatter Scientific Association) and CUPRI (Cornell University Portable Radar Instrument), as well as other ground facilities, to provide continual monitoring of the mesosphere by remote sensing techniques. The primary objectives of the campaign were to study noctilucent clouds (NLC's) and polar mesospheric summer echoes (PMSE's), including their possible relationship to local aerosols and/or small scale turbulence. The program involved scientific participation from eight countries, and promises to produce many results during the next few years. This overview considers the scientific campaign and briefly discusses preliminary results. These results are provided in more detail in papers following this overview.

Goldberg, R. A.↗
NASA NTRS1995

Analytical pyrolysis experiments of Titan aerosol analogues in preparation for the Cassini Huygens mission

Comparative pyrolysis mass spectrometric data of Titan aerosol analogs, called 'tholins', are presented. The Titan tholins were produced in the laboratory at Cornell by irradiation of simulated Titan atmospheres with high energy electrons in plasma discharge. Mass-spectrometry measurements were performed at FOM of the solid phase of various tholins by Curie-point pyrolysis Gas-Chromatography/Mass-Spectrometry (GCMS) and by temperature resolved in-source Pyrolysis Mass-Spectrometry to reveal the composition and evolution temperature of the dissociation products. The results presented here are used to further define the ACP (Aerosol Collector Pyrolyser)-GCMS experiment and provide a basis for modelling of aerosol composition on Titan and for the iterpretation of Titan atmosphere data from the Huygens probe in the future.

Ehrenfreund, P.↗
NASA NTRS1993

First height comparison of noctilucent clouds and simultaneous PMSE

On the night of August 9-10, 1991, two rocket payloads were launched into simultaneously occurring noctilucent clouds (NLC) and polar mesospheric summer echoes (PMSE) above Esrange, a third rocket payload was launched into a NLC where a PMSE was detected 5 minutes later above Esrange, in Sweden as part of the NLC-91 campaign. An aim of this experiment was to compare the vertical structures and locations of the NLC and PMSE events. To this end, in-situ optical photometers and particle impact sensors were used to measure the altitude and vertical structure of the NLC layer, while the Cornell University portable radar interferometer (CUPRI) was used to probe the PMSE. Although this comparison is complicated by the horizontal separations between the in-situ measurements and the radar volume, and low electron densities which reduced the overall radar reflectivity, we conclude that the PMSE layer in the CUPRI radar volume remained above the NLC layer detected by the in-situ instruments by 300 to 2000 m throughout the experiment. We interpret this result as supporting the view that PMSE are more likely to result from the presence of aerosols smaller than the ones optically detectable as NLCs.

Waelchli, Urs↗
NASA NTRS1993

CUPRI system configuration for NLC-91 and observations of PMSE during Salvo A

The Cornell University Portable Radar Interferometer (CUPRI) provided nearly continuous monitoring of the mesosphere above Esrange, Sweden during the noctilucent cloud rocket and radar campaign of the summer of 1991 (NLC-91). CUPRI probed the mesosphere above Esrange from 78 to 91 km altitude with 300-meter resolution and was sensitive to the enhanced Polar Mesospheric Summer Echoes (PMSE) that occur in the same altitude range as NLC formations. Out of the total of 264 hours of CUPRI observation time, PMSE were present for 140 hours. Rocket Salvo A was flown on the night of August 9-10 into an NLC event that occurred simultaneously with a thin and weakening PMSE layer. High-resolution Doppler spectrograms of this PMSE event revealed sawtooth-like discontinuities at approximately 83 km altitude, which we interpret to be a distorted partial reflection layer which was advected across the radar beam.

Swartz, Wesley E.↗
NASA NTRS1993

CUPRI observations of PMSE during Salvo B of NLC-91: Evidence of both partial relfection and turbulent scatter

During the first rocket sequence (called Salvo B) of the NLC-91 campaign, the Cornell University Portable Radar Interferometer (CUPRI) observed two simultaneously occurring layers of Polar Mesophere Summer Echoes (PMSE). during the time of the Turbo B flight, the high time-resolution CUPRI Doppler spectra exhibited sawtooth-like discontinuities in the lower layer which we interpret to be a distorted partial reflection layer which was advected across the radar beam. The upper layer, on the other hand, appeared to be caused by turbulent scatter and we estimate the turbulence energy dissipation rate in the upper layer at the time of the Turbo B flight to have been approximately 0.04 W/kg. Futhermore, a shift in the antenna beam direction from vertical to 8 deg off zenith revealed an aspect sensitivity of approximately 5 dB in the lower layer but none in the upper layer. We conclude that, at this particular time, turbulent scatter was responsible for the upper layer while some form of partial reflection was dominant in the lower layer.

Cho, John Y. N.↗
NASA NTRS1993

CUPRI observations of PMSE during Salvo C of NLC-91: Evidence of a depressed mesopause temperature

The Cornell University Portable Radar Interferometer (CUPRI) observed two extremely strong layers of Polar Mesosphere Summer Mesosphere (PMSE) thirty minutes prior to the launch of Salvo C of the NLC-91 campaign. The lower layer exhibited a S/N ratio of 42 dB (the second strongest event of NLC-91), vertical velocities of a few m/s, and a narrow spectral width, suggesting that it was the result of partial reflections. The upper layer, in contrast, exhibited sinusoidal structures in vertical velocity with peak amplitudes greater than +/- 10 m/s and wide spectral widths. These structures were observed to grow and steepen with altitude until they broke and produced turbulent radar scattering. We conclude that the rapid rate of growth of hte wave with altitude was the result of a depressed mesopause temperature and a nearly adiabatic temperature gradient at PMSE heights and that the simultaneous measurement of both a low mesopause temperature and strong PMSE supports recent theories that find the presence of charged aerosols to be the key to the unique radar cross sections associated with PMSE.

Miller, Clark A.↗
NASA NTRS1993

An overview of NLC-91: A rocket/radar study of the polar summer mesophere

In late July and early August of 1991, a major suborbital scientific campaign (NLC-91) involving scientists from eight countries was conducted at ESRANGE, Kiruna, Sweden and at Heiss Island, Russia. The purpose of the program was to investigate the chemical, dynamical, and electrodynamical properties of the polar summer mesosphere. Thirty one rocket flights were coordinated with two coherent radar facilities, European Incoherent Scatter (EISCAT) and Cornell Univesity Portable Radar Interferometer (CUPRI), and with other ground-based observatories and facilities. This permitted direct comparison between the in situ measurements and those obtained by remote sensing of the mesosphere via continuous ground-based monitoring. The primary objectives of the campaign were to study noctilucent clouds (NLCs) and polar mesospheric summer echoes (PMSEs), including their possible relationship to local aerosols and/or small scale turbulence. This overview describes the scientific program, discusses the geophysical conditions during launch activities, and reviews some of the preliminary results. More detailed results can be found in the papers which follow.

Goldberg, R. A.↗
NASA NTRS1993

Evidence for two different structuring and scattering mechanisms and the associated role of aerosols in the polar summer mesosphere

A Super Arcas rocket, MISTI B, was launched as part of the Polar Mesospheric Summer Echoes (PMSE) salvo to measure electron density irregularities using rf and dc probes. Large and small scale structures in the electron density were measured on rocket ascent and descent at the altitudes of 86.5 and 88.5 +/- .5 km. Since the rocket apogee was 89 km, the rocket was in the height range 88.5 +/- .5 km for 30 seconds giving us an unusual measurement of horizontal structure over a distance of 5.5 km. A power spectrum of the fluctuations for the upper layer gives further evidence that turbulent mixing is an important process in PMSE. The power spectrum of the lower layer, however, gives evidence that this layer is characterized by a form of partial or Fresnel scattering. Both spectra are in excellent agreement with similar analysis of electron fluctuation spectra measured in the same layers on the TURBO-B rocket flown 12 minutes later and the analysis of Cornell University Portable Radar Interferometer (CUPRI) data by Cho et al., 1993A. Thus two different structuring and scattering mechanisms exist at altitudes only 1 km apart. Using the simultaneous dc and rf probe measurements of electron depletions and sharp gradients in the lower layer, we speculate on the role of aerosols in creating these depletions and gradients.

Ulwick, J. C.↗
NASA NTRS1993

First in-situ observations of neutral and plasma density fluctuations within a PMSE layer

The NLC-91 rocket and radar campaign provided the first opportunity for high resolution neutral and plasma turbulence measurements with simultaneous observations of PMSE (Polar Mesospheric Summer Echoes). During the flight of the TURBO payload on August 1, 1991, Cornell University Portable Radar Interferometer (CUPRI) and European Incoherent Scattter facility (EISCAT) observed double PMSE layers located at 86 and 88 km altitude, respectively. Strong neutral density fluctuations were observed in the upper layer but not in the lower layer. The fluctuation spectra of the ions and neutrals within the upper layer are consistent with standard turbulence theories. However, we show that there is no neutral turbulence present in the lower layer and that something else must have been operating here to create the plasma fluctuations and hence the radar echoes. Although the in situ measurements of the electron density fluctuations are much stronger in the lower layer, the higher absolute electron density of the upper layer more than compensated for the weaker fluctuations yielding comparable radar echo powers.

Lubken, Franz-Josef↗
NASA NTRS1994

VHF radar and rocket observations of equatorial spread F on Kwajalein

VHF radar data from the Summer 1990 Equatorial Spread F campaign on Kwajalein are presented. The Cornell 50 MHz portable radar interferometer (CUPRI) operated concurrently with the Altair UHF incoherent scatter radar throughout July and August and supported two sounding rocket flights on July 30 and August 2. This experiment provided the first opportunity to simultaneously diagnose equatorial spread F using the three prime experimental techniques: VHF/UHF coherent scatter, incoherent scatter, and in situ probe measurements of electric field and density fluctuations. The intensity of the coherent echoes observed was consistent with typical Jicamarca spread F observations, but chains of periodic, large-scale plasma upwellings were observed more often and for much longer durations on Kwajalein than have been seen over Peru. CUPRI also measured Doppler frequencies in one upwelling corresponding to 1200-m/s plasma drift velocities. This measurement agrees with recent observations of supersonic drift rates at the magnetic equator by spacecraft. Near the most active localized plasma upwellings, interferometer data reveal that the zonal drift rate of plasma irregularities can vary sharply in space, as one would expect for two-dimensional incompressible flow. We introduce a semiempirical model of the three-dimensional spectrum of F region irregularities that is consistent with the one-dimensional spectra of density fluctuations observed by sounding rockets and with the axial ratio of irregularities determined recently. Normalized to data from one of the rocket flights on Kwajalein, the model predicts the 3-m scattering cross-section measured by CUPRI to within a few decibels.

Hysell, D. L.↗
NASA NTRS1995

Development work for a superconducting linear collider

For future linear e(+)e(-) colliders in the TeV range several alternatives are under discussion. The TESLA approach is based on the advantages of superconductivity. High Q values of the accelerator structures give high efficiency for converting RF power into beam power. A low resonance frequency for the RF structures can be chosen to obtain a large number of electrons (positrons) per bunch. For a given luminosity the beam dimensions can be chosen conservatively which leads to relaxed beam emittance and tolerances at the final focus. Each individual superconducting accelerator component (resonator cavity) of this linear collider has to deliver an energy gain of 25 MeV/m to the beam. Today s.c. resonators are in use at CEBAF/USA, at DESY/Germany, Darmstadt/Germany KEK/Japan and CERN/Geneva. They show acceleration gradients between 5 MV/m and 10 MV/m. Encouraging experiments at CEA Saclay and Cornell University showed acceleration gradients of 20 MV/m and 25 MV/m in single and multicell structures. In an activity centered at DESY in Hamburg/Germany the TESLA collaboration is constructing a 500 MeV superconducting accelerator test facility (TTF) to demonstrate that a linear collider based on this technique can be built in a cost effective manner and that the necessary acceleration gradients of more than 15 MeV/m can be reached reproducibly. The test facility built at DESY covers an area of 3.000 m2 and is divided into 3 major activity areas: (1) The testlinac, where the performance ofthe modular components with an electron beam passing the 40 m long acceleration section can be demonstrated. (2) The test area, where all individual resonators are tested before installation into a module. (3) The preparation and assembly area, where assembly of cavities and modules take place. We report here on the design work to reach a reduction of costs compared to actual existing superconducting accelerator structures and on the facility set up to reach high acceleration gradients in a reproducible way.

Matheisen, Axel↗