Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cl”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

NCERC-CL TREAT Free Field Characterization Foil Reaction Rate Results

This report summarizes the analysis and preliminary MCNP reaction rate modeling of free field characterization measurements performed in the Transient Reaction Test Facility (TREAT) at Idaho National Laboratory (INL) between 12/18/2023 and 2/22/2024. A series of seven irradiations were performed using the Big-BUSTER (Broad Use Specimen Transient Experiment Rig) core configuration. Foil sets including 19.5% LEU-Zr alloy wire, S, Au, Fe, Ni, Co, Ti, and Zr were deployed in each irradiation. Identical foil sets were supplied to Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and INL. All foils were supplied by INL. Additional details on the experiment can be found in [2]. The foil sets were shipped to the National Criticality Experiments Research Center Counting Laboratory (NCERC-CL) branch at LANL (NCERC-CL NISC) and were received on 3/25/2024. Additional details on receipt and counting are reported in [3]. All reactor dosimetry measurements were performed in adherence to the ASTM standards applicable to reactor dosimetry. Measured reaction rates from Au, Co, Fe, Ni, and Ti are reported. Select reaction rate ratios and simulated reaction rates and ratios are discussed. Reaction rates for all measured reaction products were modeled with MCNP 6.3.1 and a TREAT input deck supplied by Edward Lum. Neutron emission estimates calculated using the measured and simulated reaction rates show excellent agreement between the three fast-threshold n-p reactions with the percent differences being < 9% between the three reactions. The capture reactions had poorer, but still reasonable, agreement with < 20% percent differences between the neutron emission estimates of the three capture reactions. The percent difference between the fast-threshold and capture reactions is ∼ 100% for each reaction. This supports the TREAT model is not accurately modeling the neutron spectrum and additional measurements are required to characterize TREAT and match measurements to simulation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Strong Lensing Model of SPT-CL J0356–5337, a Major Merger Candidate at Redshift 1.0359

We present an analysis of the mass distribution inferred from strong lensing by SPT-CL J0356-5337, a cluster of galaxies at redshift $z=1.0359$ revealed in the follow-up of the SPT-SZ clusters. The cluster has an Einstein radius of ${\theta }_{{\rm{E}}}\simeq $ 14'' for a source at z = 3 and a mass within 500 kpc of ${M}_{500\mathrm{kpc}}=4.0\pm 0.8\times {10}^{14}\,$ ${M}_{\odot }$ . Our spectroscopic identification of three multiply imaged systems ($z=2.363$, $z=2.364$, and $z=3.048$), combined with HSTF606W-band imaging allows us to build a strong lensing model for this cluster with an rms of $\leqslant 0\buildrel{\prime\prime}\over{.} 3$. Our modeling reveals a two-component mass distribution in the cluster. One mass component is dominated by the brightest cluster Galaxy and the other component, separated by ~170 kpc, contains a group of eight red elliptical galaxies confined in a ~9'' (~70 kpc) diameter circle. We estimate the mass ratio between the two components to be between 1:1.25 and 1:1.58. In addition, spectroscopic data reveal that these two near-equal mass cores have only a small velocity difference of ~300 km s-1 between the two components. This small radial velocity difference suggests that most of the relative velocity takes place in the plane of the sky, and implies that SPT-CL J0356-5337 is a major merger with a small impact parameter seen face-on. We also assess the relative contributions of Galaxy-scale halos to the overall mass of the core of the cluster and find that within 800 kpc from the brightest cluster Galaxy about 27% of the total mass can be attributed to visible and dark matter associated with galaxies, whereas only 73% of the total mass in the core comes from cluster-scale dark matter halos.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Li 2 MnO 3 : A Catalyst for a Liquid Cl 2 Electrode in Low‐Temperature Aqueous Batteries

Abstract Li 2 MnO 3 has been contemplated as a high‐capacity cathode candidate for Li‐ion batteries; however, it evolves oxygen during battery charging under ambient conditions, which hinders a reversible reaction. However, it is unclear if this irreversible process still holds under subambient conditions. Here, the low‐temperature electrochemical properties of Li 2 MnO 3 in an aqueous LiCl electrolyte are evaluated and a reversible discharge capacity of 302 mAh g −1 at a potential of 1.0 V versus Ag/AgCl at −78 °C with good rate capability and stable cycling performance, in sharp contrast to the findings in a typical Li 2 MnO 3 cell cycled at room temperature, is observed. However, the results reveal that the capacity does not originate from the reversible oxygen oxidation in Li 2 MnO 3 but the reversible Cl 2 (l)/Cl − (aq.) redox from the electrolyte. The results demonstrate the good catalytic properties of Li 2 MnO 3 to promote the Cl 2 /Cl − redox at low temperatures.

Sui, Yiming↗
DOE OSTI2024

Tailoring Ion Transport in Li 3‐3y Ho 1+y Cl 6‐x Br x via Transition‐Metal Free Structural Planes and Charge Carrier Distribution

Abstract Localized atomistic disorder in halide‐based solid electrolytes (SEs) can be leveraged to boost Li + mobility. In this study, Li + transport in structurally modified Li 3 HoCl 6 , via Br − introduction and Li + deficiency, is explored. The optimized Li 3‐3 y Ho 1+ y Cl 6‐ x Br x achieves an ionic conductivity of 3.8 mS cm −1 at 25 °C, the highest reported for holmium halide materials. 6,7 Li nuclear magnetic resonance and relaxometry investigations unveil enhanced ion dynamics with bromination, attaining a Li + motional rate neighboring 116 MHz. X‐ray diffraction analyses reveal mixed‐anion‐induced phase transitions with disproportionate octahedral expansions and distortions, creating Ho‐free planes with favorable energetics for Li + migration. Bond valence site energy analysis highlights preferred Li + transport pathways, particularly in structural planes devoid of Ho 3+ blocking effects. Molecular dynamics simulations corroborate enhanced Li + diffusion with Br − introduction into Li 3 HoCl 6 . Li‐Ho electrostatic repulsions in the (001) plane presumably drive Li + diffusion into the Ho‐free (002) layer, enabling rapid intraplanar Li + motion and exchange between the 2d and 4h sites. Li 3‐3 y Ho 1+ y Cl 6‐ x Br x also demonstrates good battery cycling stability. These findings offer valuable insights into the intricate correlations between structure and ion transport and will help guide the design of high‐performance fast ion conductors for all‐solid‐state batteries.

Chemistry↗
DOE OSTI2023

Organo‐Functionalized Lacunary Double Cubane‐Type Oxometallates: Synthesis, Structure, and Properties of [(M II Cl) 2 (V IV O) 2 {((HOCH 2 CH 2 )(H)N(CH 2 CH 2 O))(HN(CH 2 CH 2 O) 2 )} 2 ] (M=Co, Zn)

Abstract Organofunctionalized tetranuclear clusters [(M II Cl) 2 (V IV O) 2 {((HOCH 2 CH 2 )(H)N(CH 2 CH 2 O))(HN(CH 2 CH 2 O) 2 )} 2 ] (1, M=Co,2: M=Zn) containing an unprecedented oxometallacyclic {M 2 V 2 Cl 2 N 4 O 8 } (M=Co, Zn) framework have been prepared by solvothermal reactions. The new oxo‐alkoxide compounds were fully characterized by spectroscopic methods, magnetic susceptibility measurement, DFT and ab initio computational methods, and complete single‐crystal X‐ray diffraction structure analysis. The isostructural clusters are formed of edge‐sharing octahedral {VO 5 N} and trigonal bipyramidal {MO 3 NCl} units. Diethanolamine ligates the bimetallic lacunary double cubane core of1and2in an unusual two‐mode fashion, unobserved previously. In the crystalline state, the clusters of1and2are joined by hydrogen bonds to form a three‐dimensional network structure. Magnetic susceptibility data indicate weakly antiferromagnetic interactions between the vanadium centers [J iso (V IV −V IV )=−5.4(1); −3.9(2) cm −1 ], and inequivalent antiferromagnetic interactions between the cobalt and vanadium centers [J iso (V IV −Co II )=−12.6 and −7.5 cm −1 ] contained in1.

Chemistry↗
DOE OSTI2021

Influence of ion site occupancies on the unit cell parameters, specific volumes, and densities of M 8 (AlSiO 4 ) 6 X 2 sodalites where M = Li, Na, K, Rb, and Ag and X = Cl, Br, and I

Here, this paper discusses the effects of composition on the unit cell parameter (a), unit cell volume (V), specific volume (v), and density (ρ) of various sodalite compositions including $M^+_8$(AlSiO 4 ) 6 Cl 2 (M = Li, Na, K, Rb, and/or Ag) and Na8(AlSiO 4 ) 6 $X^-_2$(X = Cl, Br, and/or I). Compositional models were developed, and the results show that the models are successful at predicting a, V, and v (and thus ρ) within the compositional range available in the literature. Discussion is included on the correlation between the ionic radii of the alkali metals and halides in the sodalite β-cages and the measured values of a, V, v, and ρ. The data show linear increases in a and ρ with increases in the average ionic radii of the M + and X - constituents (data for v show a linear decrease).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Reaction of BCl 3 with H- and Cl-terminated Si(100) as a pathway for selective, monolayer doping through wet chemistry

The reaction of boron trichloride with the H and Cl-terminated Si(100) surfaces was investigated to understand the interaction of this molecule with the surface for designing wet-chemistry based silicon surface doping processes using a carbon- and oxygen-free precursor. The process was followed with X-ray photoelectron spectroscopy (XPS). Within the reaction conditions investigated, the reaction is highly effective on Cl-Si(100) for temperatures below 70°C, at which point both surfaces react with BCl$_3$. The XPS investigation followed the formation of a B 1s peak at 193.5 eV corresponding to (B-O)$_x$ species. Even the briefest exposure to ambient conditions lead to hydroxylation of surface borochloride species. However, the Si 2p signature at 102 eV allowed for a confirmation of the formation of a direct Si-B bond. Density functional theory was utilized to supplement the analysis and identify possible major surface species resulting from these reactions. This work provides a new pathway to obtain a functionalized silicon surface with a direct Si-B bond that can potentially be exploited as a means of selective, ultra-shallow, and supersaturated doping.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Interface stability of LiCl-rich argyrodite Li 6 PS 5 Cl with propylene carbonate boosts high-performance lithium batteries

In solid-state lithium (Li)-metal batteries (SSLMBs), sulfide-based Li-ion conductors represent one of the most popular solid electrolytes (SEs). However, the development of sulfide-based SSLMBs is significantly hampered by interfacial issues including large solid-solid contact resistance and serious side reactions at the SE/electrode interface. To address these issues, here, we demonstrated a simple and efficient strategy by using LiCl-rich argyrodite Li 6 PS 5 Cl (Li 6 PS 5 Cl-LiCl) SE and trace amount of propylene carbonate (PC) at the SE/electrode interface to facilitate the formation of stable and robust solid electrolyte interphase (SEI). Additionally, the formed SEI not only serves as a buffer layer to passivate the interfacial reactions and suppress Li dendrite growth, but also acts as a bridge for Li-ion conduction to reduce the contact resistance. As a result, the Li||Li symmetric cell exhibited long-term electrochemical cycling stability over 1000 h at a current density of 0.2 mA cm -2 . Furthermore, the assembled Li||Li 4 Ti 5 O 12 (LTO) batteries delivered a specific capacity of 175 mAh g–1 at 0.2 C, and remained an excellent specific capacity of 116 mAh g –1 after 200 cycles at a high current rate of 1 C. These features indicate a feasible strategy to enhance the interfacial property of high-performance SSLMBs.

25 ENERGY STORAGE↗
DOE OSTI2022

Modeling assisted synthesis of Zr-doped Li 3-x In 1-x Zr x Cl 6 with ultrahigh ionic conductivity for lithium-ion batteries

All-solid-state lithium-ion batteries (ASSLBs) are an important milestone for the future of energy storage because of their capability of impressive energy density and outstanding safety. However, oxide and sulfide solid-state electrolytes (SSEs) suffer from either low ionic conductivity or poor chemical stability. In contrast, halide-based SSEs, are promising as candidate materials owing to high conductivity, good stability, and broad cathode compatibility. Though element doping of the SSEs is an effective and common approach to further improve their electrochemical properties, dopant exploration and optimization through solely experimental trials are both costly and time-consuming. For this aspect, computational simulations for dopant element and concentration screening are adopted in this research and zirconium is selected as a suitable dopant for Li 3 InCl 6 . Further, the synthesized Li 2.75 In 0.75 Zr 0.25 Cl 6 exhibited Li ionic conductivity of 5.82 x 10 -3 Scm -1 at room temperature, which is the highest among reported halide SSEs. The ASSLB formed with Li 2 CoO 2 -Li 2.75 In 0.75 Zr 0.25 Cl 6 -Li/In delivers a high initial capacity of 129.3 mAh∙g -1 . Conclusively, this work provides an effective approach which combines computational modeling and experimental verification for the development of halide SSEs with improved stability and conductivity. The successful design approach and compelling results provide further possibilities and capabilities in future SSE research.

25 ENERGY STORAGE↗
DOE OSTI2023

Quantification of the 35 Cl($\textit{n, p}$) reaction channel

The evaluated 35 Cl($\textit{n, p}$) cross sections in the ENDF/B-VIII.0 nuclear data library remain uncertain because of the lack of measured data in the neutron energy range between 100-600 keV. In this energy region, the R-matrix analysis relies heavily on estimated ($\textit{n, p}$) partial widths and level density information. This resulted in significant differences of the evaluated cross sections and predicted reactivity in nuclear reactor applications with respect to previous nuclear data libraries. Here, we present a methodology to quantify the cross sections for the 35 Cl($\textit{n, p}$) reaction channel from the combination of measured total cross sections and model calculations.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

Crystal structure of alectinib hydrochloride Type I, C 30 H 35 N 4 O 2 Cl

The crystal structure of alectinib hydrochloride has been solved and refined using synchrotron X-ray powder diffraction data and optimized using density functional theory techniques. Alectinib hydrochloride crystallizes in space groupP2 1 /n(#14) with the following parameters:a= 12.67477(7),b= 10.44076(5),c= 20.38501(12) Å,β= 93.1438(7)°,V= 2693.574(18) Å 3 , andZ= 4 at 295 K. The crystal structure consists of stacks of molecules along theb-axis, and the stacks contain chains of strong N–H⋯Cl hydrogen bonds. One density functional theory calculation moved a proton from an N atom to the Cl, but another calculation yielded a more chemically reasonable result. The powder pattern has been submitted to ICDD for inclusion in the Powder Diffraction File™ (PDF®)

Materials Science↗
DOE OSTI2021

Material Design Strategy for Halide Solid Electrolytes Li 3 MX 6 (X = Cl, Br, and I) for All-Solid-State High-Voltage Li-Ion Batteries

Although several solid electrolyte (SE) candidates have been explored, achieving the necessary combination of performance, stability, and processability has been challenging. Recently, several lithium ternary halides have attracted increasing attention for SEs because of their favorable combination of high ionic conductivity and wide electrochemical window. This study aims to provide a material design strategy for lithium halides Li 3 MX 6 (X = Cl, Br, and I) for high-voltage all-solid-state Li-ion batteries, achieved by the systematic investigation of crystal structures, phase and electrochemical stabilities, electronic and mechanical properties, and ionic conductivities. Calculation results reveal that the electronegativity difference between M and X affects structural properties and stabilities. Weak Coulomb interactions in Li 3 MX 6 result in the preference of the monoclinic phase, and the oxidation potential and chemical stability against the cathode materials of Li 3 MX 6 increase for relatively small X. Chlorides exhibit the highest oxidation potential (~4.3 V) among Li 3 MX 6 , suggesting that chlorides are appropriate SEs for high-voltage cathodes. The band gap and elastic moduli increase for relatively small X, suggesting the relatively low electronic conductivity and elastic deformability of chlorides. Chlorides with transition metals typically exhibit trigonal phases, a wider electrochemical stability window, a larger band gap, and higher elastic moduli compared to other types of halides. Additionally, chloride Li 3 MCl 6 is expected to have relatively high ionic conductivities with the aliovalent substitution of M 3+ to Zr 4+ and the anion mixing of Cl with Br. The findings of this study will provide fundamental guidelines for the development of lithium halide SEs for high-voltage all-solid-state Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2020

Dehydration of UO 2 Cl 2 ·3H 2 O and Nd(NO 3 ) 3 ·6H 2 O with a Soft Donor Ligand and Comparison of Their Interactions through X-ray Diffraction and Theoretical Investigation [plus Supplemental Information]

Herein we investigated whether the relatively Lewis basic imidazole-2-thiones could be used to substitute water ligands bound to f-element cations and generate f-element soft donor complexes. Reactions of 1,3-diethylimidazole-2-thione (C 2 C 2 ImT) with Nd(NO 3 ) 3 ·6H 2 O and UO 2 Cl 2 ·3H 2 O led to the isolation of the anhydrous thione complexes Nd(NO 3 ) 3 (C 2 C 2 ImT) 3 and UO 2 Cl 2 (C 2 C 2 ImT) 2 , characterized by single crystal X-ray diffraction. Differences in the strength of metal–thione interactions have been examined by means of the crystal structure analysis and density functional theory (DFT) calculations. The C 2 C 2 ImT ligands were found to be affected by both coordination and noncovalent interactions, making it impossible to deconvolute the effects of one from the other. Calculated partial atomic charges indicated greater ligand-to-metal charge transfer in the [UO 2 ] 2+ complex, indicative of a stronger interaction. The reactivity of C 2 C 2 ImT demonstrates its usefulness in the preparation of f-element soft donor complexes from readily available hydrates that could be useful intermediates for promoting the coordination and studying the effects of soft donor anions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Chemical Kinetics for the Oxidation of Californium(III) Ions with Select Radiation-Induced Inorganic Radicals (Cl 2 •– and SO 4 •– )

Despite the availability of transuranic elements increasing in recent years, our understanding of their most basic and inherent radiation chemistry is limited and yet essential for accurate interpretation of their physical and chemical properties. Here, in this work, we explore the transient interactions between trivalent californium ions (Cf 3+ ) and select inorganic radicals arising from the radiolytic decomposition of common anions and functional group constituents, specifically the dichlorine (Cl 2 •- ) and sulfate (SO 4 •- ) radical anions. Chemical kinetics, as measured by integrated electron pulse radiolysis and transient absorption spectroscopy techniques, are presented for the reactions of these two oxidizing radicals with Cf 3+ ions. The derived and ionic strength corrected second-order rate coefficients (k) for these radiation-induced processes are k(Cf 3+ + Cl 2 •- ) = (8.28 ± 0.61) × 10 5 M -1 s -1 and k(Cf 3+ + SO 4 •- ) = (9.50 ± 0.43) × 10 8 M -1 s -1 under ambient temperature conditions (22 ± 1 °C).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Lattice Dynamics and Optoelectronic Properties of Vacancy-Ordered Double Perovskite Cs 2 TeX 6 (X = Cl – , Br – , I – ) Single Crystals

The soft, dynamic lattice of inorganic lead halide perovskite CsPbX 3 (X = Cl ⁻ , Br ⁻ , I ⁻ ) leads to the emergence of many interesting photophysical and optoelectronic phenomena. However, probing their lattice dynamics with vibrational spectroscopy remains challenging. The influence of the fundamental octahedral building block in the perovskite lattice can be better resolved in zero-dimensional (0D) vacancy-ordered double perovskites of form A 2 BX 6 . Here we study Cs 2 TeX 6 (X = Cl ⁻ , Br ⁻ , I ⁻ ) single crystals to yield detailed insight into the fundamental octahedral building block and to explore the effect that its isolation in the crystal structure has on structural and electronic properties. The isolated [TeX 6 ] 2- octahedral units serve as the vibrational, absorbing, and emitting centers within the crystal. Serving as the vibrational centers, the isolated octahedra inform the likelihood of a random distribution of 10 octahedral symmetries within the mixed-halide spaces, as well as the presence of strong exciton-phonon coupling and anharmonic lattice dynamics. Serving as the absorbing and emitting centers, the isolated octahedra exhibit compositionally tunable absorption (1.50-3.15 eV) and emission (1.31-2.11 eV) energies. Due to greater molecular orbital overlap between neighboring octahedra with increasing halide anion size, there is a transition from a more molecule-like electronic structure in Cs 2 TeCl 6 and Cs 2 TeBr 6 -as expected from the effective 0D nature of these single crystals-to a dispersive electronic structure in Cs 2 TeI 6 , typical of three-dimensional (3D) bulk single crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Li 0.625 Al 0.125 H 0.25 Cl 0.75 O 0.25 Superionic Conductor with Disordered Rock-Salt Structure

Solid-state Li-ion conductors are of broad interest in electrochemical energy storage, especially in solid-state Li batteries that serve as a promising alternative for the next-generation safe and high-energy-density batteries. Exploring solid-state superionic conductors is significant for the development of solid-state Li batteries with high performance. Herein, we report a disordered rock-salt (A 1 B 1 )-structured solid electrolyte (Li 0.625 Al 0.125 H 0.25 )(Cl 0.75 O 0.25 ) (abbr. LAHCO) that was synthesized using Li 2 OHCl and LiAlCl 4 as precursors. Neutron diffraction reveals that Li, Al, and H atoms occupy the A sites and O and Cl atoms occupy the B sites in the A 1 B 1 structure for pure LAHCO. The LAHCO compound with excess LiAlCl 4 shows the highest Li + ionic conductivity of ~10 –4 S cm –1 at room temperature due to the disordering induced by configurational entropy as well as the entropy of mixing. Moreover, LAHCO–LiAlCl 4 solid electrolyte exhibits a stable polarization voltage under a current density of 5–50 μA cm –2 in Li symmetric cells. Furthermore, this work not only explicates the importance of Li-ion conductors with a rock-salt structure but also contributes toward the development of solid-state Li-ion conductors for broad applications.

25 ENERGY STORAGE↗
DOE OSTI2026

3D printed water-stable Cd-doped Cs 4 MnBi 2 Cl 12 /polylactic acid perovskite/polymer composites for high-flux X-ray scintillation

Stable and efficient X-ray scintillators are crucial for medical diagnostics, industrial, and defense applications. However, conventional scintillator technologies face a trade-off between stability, optimal performance, and sustainability. Herein, we introduce 3D-printed Cs 4 MnBi 2 Cl 12 (Pero1) and Cs 4 Cd 0.68 Mn 0.32 Bi 2 Cl 12 (Pero2) perovskite microcrystals embedded within a polylactic acid (PLA) polymer composite as X-ray scintillators, combining efficiency, stability, and sustainability. The orange luminescent perovskite powder phosphors exhibited poor water stability, which was successfully addressed through incorporation into PLA via filament extrusion and fused deposition modeling (FDM) 3D printing. The resulting composite films demonstrated remarkable water stability while maintaining uniform orange emission throughout the polymer matrix, as confirmed by 3D topography scanning and X-ray fluorescence mapping. Structural characterization revealed minimal chemical interaction between the perovskite and PLA matrix, with the composites retaining their crystalline properties. The PLA-Pero2 composite exhibited superior optical properties, with a photoluminescence quantum yield of 47%, nearly 17 times higher than that of PLA-Pero1 (2.8%), attributed to the effective suppression of non-radiative decay pathways through Cd 2+ doping. Under hard X-ray irradiation at synchrotron beamlines, both composites exhibited excellent radioluminescence, with emission peaks at 605 nm, a linear response across a wide X-ray flux range, and remarkable radiation stability, showing less than 3% intensity degradation after 600 seconds of continuous high-dose exposure. The PLA-Pero2 composite achieved a spatial resolution of 5 line pairs per millimeter and a contrast ratio of 0.255. These performance metrics, combined with the polymer's biodegradability and scalability through additive manufacturing, position PLA-based composites as a more sustainable alternative to conventional petroleum-based polymer scintillators for next-generation medical imaging, radiation monitoring, and industrial radiography applications.

3D Printing↗
DOE OSTI2025

Li 3.6 In 7 S 11.8 Cl: an air- and moisture-stable superionic conductor

Li 3.6 In 7 S 11.8 Cl has a face-centered cubic arrangement of S 2− /Cl − stabilized by Li + /In 3+ that form 3D ion conduction paths. The moisture stability and fast ion conduction make Li 3.6 In 7 S 11.8 Cl a promising electrolyte for solid-state batteries.

Oyekunle, Ifeoluwa P. [Department of Chemistry and↗