Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Charge Distributions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Calculations of heavy ion charge state distributions for nonequilibrium conditions

Numerical calculations of the charge state distributions of test ions in a hot plasma under nonequilibrium conditions are presented. The mean ionic charges of heavy ions for finite residence times in an instantaneously heated plasma and for a non-Maxwellian electron distribution function are derived. The results are compared with measurements of the charge states of solar energetic particles, and it is found that neither of the two simple cases considered can explain the observations.

Luhn, A.↗
NASA NTRS1985

Charge state distributions of oxygen and carbon in the energy range 1 to 300 keV/e observed with AMPTE/CCE in the magnetosphere

Observations of charge state distributions of oxygen and carbon are presented that were obtained with the charge-energy-mass spectrometer onboard the AMPTE/CCE spacecraft. Data were selected for two different local time sectors (apogee at 1300 LT and 0300 LT, respectively), three L-ranges (4-6, 6-8, and greater than 8), and quiet to moderately disturbed days (Kp less than or equal to 4). The charge state distributions reveal the existence of all charge states of oxygen and carbon in the magnetosphere. The relative importance of the different charge states strongly depends on L and much less on local time. The observations confirm that the solar wind and the ionosphere contribute to the oxygen population, whereas carbon only originates from the solar wind. The L-dependence of the charge state distributions can be interpreted in terms of these different ion sources and of charge exchange and diffusion processes that largely influence the distribution of oxygen and carbon in the magnetosphere.

Kremser, G.↗
DOE OSTI2014

Site-dependent charge transfer at the Pt(111)-ZnPc interface and the effect of iodine

The electronic structure of ZnPc, from sub-monolayers to thick films, on bare and iodated Pt(111) is studied by means of X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and scanning tunneling microscopy. Our results suggest that at low coverage ZnPc lies almost parallel to the Pt(111) substrate, in a non-planar configuration induced by Zn-Pt attraction, leading to an inhomogeneous charge distribution within the molecule and an inhomogeneous charge transfer to the molecule. ZnPc does not form a complete monolayer on the Pt surface, due to a surface-mediated intermolecular repulsion. At higher coverage ZnPc adopts a tilted geometry, due to a reduced molecule-substrate interaction. Our photoemission results illustrate that ZnPc is practically decoupled from Pt, already from the second layer. Pre-deposition of iodine on Pt hinders the Zn-Pt attraction, leading to a non-distorted first layer ZnPc in contact with Pt(111)-I(√3×√3) or Pt(111)-I(√7×√7), and a more homogeneous charge distribution and charge transfer at the interface. On increased ZnPc thickness iodine is dissolved in the organic film where it acts as an electron acceptor dopant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1983

Eikonal phase shift analyses of carbon-carbon scattering

A high-energy double-folding optical potential approximation to the exact nucleus-nucleus multiple-scattering series is used in determining eikonal phase shifts for carbon-carbon scattering at 204.2, 242.7, and 288.6 MeV. The double-folding potentials are derived by folding the energy-dependent free nucleon-nucleon interaction with densities for the projectile and target; these latter are obtained by unfolding the finite nucleon charge density from harmonic-well carbon charge distributions. The charge parameters for these distributions are taken from the results of electron scattering experiments. Predictions are made for total, reaction, and elastic differential cross sections using standard partial wave analysis for the scattering of identical particles and are then compared with recent experimental results. Excellent agreement is obtained despite the absence of arbitrarily adjusted parameters in the theory.

Townsend, L. W.↗
DOE OSTI2021

Pseudorapidity distributions of charged particles in pp($\bar p$), p(d)A and AA collisions using Tsallis thermodynamics

The pseudorapidity distributions of charged particles measured in p + p($\overline{\text{p}}$) collisions for energies ranging from $\sqrt{{s}_{\mathrm{N}\mathrm{N}}}=23.6$ GeV to 13 TeV and A + A collisions at RHIC and LHC are investigated in the fireball model with Tsallis thermodynamics. We assume that the rapidity axis is populated with fireballs following q-Gaussian distribution and the charged particles follow the Tsallis distribution in the fireball. We also extend the fireball model to asymmetric collision systems, i.e. d + Au collisions at $\sqrt{{s}_{\mathrm{N}\mathrm{N}}}=200$ GeV and p + Pb collisions at $\sqrt{{s}_{\mathrm{N}\mathrm{N}}}=5.02$ TeV, by taking into account the asymmetric geometry configuration. The model can fit the experimental data well for all the collision systems and centralities investigated. The collision energy and centrality dependence of the model parameters for the symmetric (asymmetric) collision system, i.e. the central position y 0 (y 0a , y 0A ) and its width σ (σ a , σ A ) of the fireball distribution, are also investigated and discussed. Furthermore, our results suggest that the fireball model with Tsallis thermodynamics can be used as a universal framework for the pseudorapidity distributions of charged particles in high energy collisions at RHIC and LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

High-Power Electric Vehicle Charging Hub Integration Platform (eCHIP): Design Guidelines and Specifications for DC Distribution-Based Charging Hub

Managed under U.S. Department of Energy (DOE)-funded EVs@Scale Consortium, High-Power Electric Vehicle Charging Hub Integration Platform (eCHIP) project aims to design and develop a high-power, interoperable charging experimental platform to research, develop, and demonstrate the integration and control approaches for a DC distribution-based high-power charging (HPC) system. The eCHIP project addresses the crucial need to design and validate efficient, low-cost, reliable, and interoperable solutions for DC-coupled charging hub ('DC hub' for short). This report explains the design, development, and implementation process of the experimental platform for the DC hub. The utilization of DC distribution holds significant potential for enhancing the operation of an HPC station architecture. However, there are challenges establishing the DC hub, including interoperability, commoditization, distributed energy resource integration, stability, DC protection, and lack of common system level controllers. To address these challenges, a testing setup is required that accommodates commercial off-the-shelf (COTS) products as well as novel, in-house designed solutions to evaluate different use cases at rated power and voltage levels.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Measurement of charge state distributions using a scintillation screen

Absolute cross sections measured using electromagnetic devices to separate and detect heavy recoiling ions need to be corrected for charge state fractions. Accurate prediction of charge state distributions using theoretical models is not always a possibility, especially in energy and mass regions where data is sparse. As such, it is often necessary to measure charge state fractions directly. In this paper we present a novel method of using a scintillation screen along with a CMOS camera to image the charge dispersed beam after a set of magnetic dipoles. A measurement of the charge state distribution for 88 Sr passing through a natural carbon foil is performed. Using a Bayesian model to extract statistically meaningful uncertainties from these images, we find agreement between the new method and a more traditional method using Faraday cups. Additional future work is need to better understand systematic uncertainties. Our technique offers a viable method to measure charge state distributions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

Pseudorapidity distributions of charged hadrons in proton-lead collisions at $\sqrt{s_{_\mathrm{NN}}} =$ 5.02 and 8.16 TeV

The pseudorapidity distributions of charged hadrons in proton-lead collisions at nucleon-nucleon center-of-mass energies $ \sqrt{s_{\mathrm{NN}}}=5.02 $ and 8.16 TeV are presented. The measurements are based on data samples collected by the CMS experiment at the LHC. The number of primary charged hadrons produced in non-single-diffractive proton-lead collisions is determined in the pseudorapidity range |η$_{lab}$| < 2.4. The charged-hadron multiplicity distributions are compared to the predictions from theoretical calculations and Monte Carlo event generators. In the center-of-mass pseudorapidity range |η$_{cm}$| < 0.5, the average charged-hadron multiplicity densities 〈dN$_{ch}$/dη$_{cm}$〉$_{|η}_{cm|}$ < 0.5 are 17.31 ± 0.01 (stat) ± 0.59 (syst) and 20.10 ± 0.01 (stat) ± 0.85(syst) at $ \sqrt{s_{\mathrm{NN}}}=5.02 $ and 8.16 TeV, respectively. The particle densities per participant nucleon are compared to similar measurements in proton-proton, proton-nucleus, and nucleus-nucleus collisions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Multiplicity and pseudo-rapidity density distributions of charged particles produced in pp, pA and AA collisions at RHIC & LHC energies

Multiplicity and pseudorapidity (η) density (d N ch /dη) distributions of charged hadrons provide key information towards understanding the particle production mechanisms and initial conditions of high-energy heavy-ion collisions. However, detector constraints limit the η-range across which charged particle measurements can be carried out. Extrapolating the measured distributions to large η-range by parameterizing measured distributions and by using calculations from event generators, we characterize the production of charged particles over the full kinematic range. In the present study, we use three different ansätze to obtain quantitative descriptions of the shape of pseudorapidity distributions of charged hadrons produced in pp, p–A, and A–A collisions for beam energies ( s NN ) ranging from a few GeV to a few TeV corresponding to RHIC and LHC energies. We study the limiting fragmentation behavior in these collisions and report evidence for participant-scaling violations in high-energy collisions at the TeV scale. We additionally examine measured pseudorapidity distributions to constrain models describing initial conditions of particle production. We predict the centrality dependence of charged particle multiplicity distributions at FAIR and NICA energies and give an estimation of charged particle multiplicity at η = 0 for the proposed HE-LHC and FCC energies.

Physics↗
DOE OSTI2017

Hardware-Software Complex for Measurement of Energy and Angular Distributions of Charged Particles Formed in Nuclear Reactions

A hardware-software complex for measurement of energy and angular distributions of charged particles formed in nuclear reactions is presented. Hardware and software structures of the complex, the basic set of the modular nuclear-physical apparatus of a multichannel detecting system on the basis of ΔE–E telescopes of silicon detectors, and the hardware of experimental data collection, storage, and processing are presented and described.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Laser power density dependence on charge state distribution of Ta ion laser plasma

Laser power density per pulse, which is commonly expressed with the unit of “W/cm2,” is an important parameter to characterize ablation plasma. To match a design charge state of heavy ion beam induced by a laser ion source, a laser power density must be carefully chosen. Above around 108 W/cm2 of laser power density, laser ablation plasma is emitted from the surface of solid material. Then, up to 109 W/cm2, the most abundant charge state is 1+. Because the ionization energy increases with higher charge states, increasing the laser intensity leads to the charge state distribution shifting higher. Increasing the density to increase charge states also results in lower time of flight due to higher velocities. The maximum laser power density is obtained by the smallest available laser spot size on the target material which is determined by the quality of the laser beam. For many accelerator applications, higher charge state beams are preferred. In particular cases, singly charge ion beams are demanded. Therefore, production of intermediate charge state beams has not been investigated well. In this study, we selected Ta4+ as an example demanded beam and tried to clarify how the transition of charge state distribution depends on laser power density. Conclusively, the possible specification of a laser ion source for Ta4+ delivery was elucidated.

Okamura, Masahiro (ORCID:0000000255521706)↗
DOE OSTI2024

Stress due to electric charge density distribution in a dielectric slab

The spatial distribution of electric field due to an imposed electric charge density profile in an infinite slab of dielectric material is derived analytically by integrating Gauss’s law. Various charge density distributions are considered, including exponential and power-law forms. Here, the Maxwell stress tensor is used to compute a notional static stress in the material due to the charge density and its electric field. Characteristics of the electric field and stress distributions are computed for example cases in polyethylene, showing that field magnitudes exceeding the dielectric strength would be required in order to achieve a stress exceeding the ultimate tensile strength.

42 ENGINEERING↗
DOE OSTI2016

Morphing of two-dimensional hole systems at ν = 3 / 2 in parallel magnetic fields: Compressible, stripe, and fractional quantum Hall phases

A transport study of two-dimensional (2D) holes confined to wide GaAs quantum wells provides a glimpse of a subtle competition between different many-body phases at a Landau level filling ν = 3/2 in tilted magnetic fields. At large tilt angles (θ), an anisotropic, stripe (or nematic) phase replaces the isotropic compressible Fermi sea at ν = 3/2 if the quantum well has a symmetric charge distribution. Furthermore, when the charge distribution is made asymmetric, instead of the stripe phase, an even-denominator fractional quantum state appears at ν = 3/2 in a range of large θ, and reverts back to a compressible state at even higher θ. We attribute this remarkable evolution to the significant mixing of the excited and ground-state Landau levels of 2D hole systems in tilted fields.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Model-independent measurement of the charge density distribution along an Fe atom probe needle using off-axis electron holography without mean inner potential effects

The one-dimensional charge density distribution along an electrically biased Fe atom probe needle is measured using a model-independent approach based on off-axis electron holography in the transmission electron microscope. Both the mean inner potential and the magnetic contribution to the phase shift are subtracted by taking differences between electron-optical phase images recorded with different voltages applied to the needle. The measured one-dimensional charge density distribution along the needle is compared with a similar result obtained using model-based fitting of the phase shift surrounding the needle. On the assumption of cylindrical symmetry, it is then used to infer the three-dimensional electric field and electrostatic potential around the needle with ∼10 nm spatial resolution, without needing to consider either the influence of the perturbed reference wave or the extension of the projected potential outside the field of view of the electron hologram. The present study illustrates how a model-independent approach can be used to measure local variations in charge density in a material using electron holography in the presence of additional contributions to the phase, such as those arising from changes in mean inner potential and specimen thickness.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

Electrostatically Tuned Self-Assembly of Branched Amphiphilic Peptides

Electrostatics plays an important role in the self-assembly of amphiphilic peptides. To develop a molecular understanding of the role of the electrostatic interactions, we develop a coarse-grained model peptide and apply self-consistent field theory to investigate the peptide assembly into a variety of aggregate nanostructures. We find that the presence and distribution of charged groups on the hydrophilic branches of the peptide can modify the molecular configuration from extended to collapsed. This change in molecular configuration influences the packing into spherical micelles, cylindrical micelles (nanofibers), or planar bilayers. The effects of charge distribution therefore has important implications for the design and utility of functional materials based on peptides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1977

Band structure of W and Mo by empirical pseudopotential method

The empirical pseudopotential method (EPM) is used to calculate the band structure of tungsten and molybdenum. Agreement between the calculated reflectivity, density of states, density of states at the Fermi surface and location of the Fermi surface from this study and experimental measurements and previous calculations is good. Also the charge distribution shows the proper topological distribution of charge for a bcc crystal.

Sridhar, C. G.↗