Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COERCIVE FORCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Physical Properties of Mn{sub 2}O{sub 3} Nanoparticles Synthesized by Co-precipitation Method at Different pH Values

Mn{sub 2}O{sub 3} nanoparticles were synthesized at different pH values ranging from 10 to 13 by co-precipitation technique. The characterization of all samples were completed by X-ray diffraction (XRD), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR), ultraviolet-absorption spectroscopy (UV), Raman spectroscopy, and M–H loop measurements. The XRD spectra show that the structure of Mn{sub 2}O{sub 3} is cubic, and the lattice parameter a decreases as pH increases. Crystalline size, determined from TEM and XRD analyses, decreases as pH increases. TGA curves show that a mass loss is significantly affected as pH increases, indicating the decomposition of organic species besides the oxidation of Mn{sub 2}O{sub 3} to Mn{sub 3}O{sub 4}. FTIR spectra indicate that the absorption peaks at 593.73 and 519.09 cm{sup − 11} referred to the stretching vibration of Mn–O and Mn–O–Mn bonds during the synthesis of Mn{sub 2}O{sub 3} nanoparticles. UV-visible spectroscopy is measured in the range 250–800 nm and showed a deviation to the lower wavelength in addition to an increase in the band-gap energy (E{sub g}) values from 1.012 to 1.370 eV is obtained. Raman spectra shows a slight deviation to the left which is conversely proportional to the crystalline size. M–H loops for the prepared samples were measured and the results of retentivity (M{sub s}) and coercivity (H{sub c}) were discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetic Properties and Electronic Structure of Co/Zr Multilayers

We investigate the magnetic and electronic properties of Co/Zr multilayers with an emphasis on the interfacial effects. The saturation magnetization, coercivity, and uniaxial anisotropy depend significantly on Co thickness. Spin-wave resonance modes were observed, and the change of resonant field as a function of mode number (n) obeys the so-called n{sup 2} law. The interlayer coupling constant was determined. The electronic properties of the interfacial alloys were studied using the WIEN2k code, employing the density functional theory. Calculations describe satisfactorily the observed magnetic behaviour. The influence of pressure on the magnetic properties of the interfacial Co{sub 1−x}Zr{sub x} alloys was investigated in which we demonstrate that the ferromagnetism is altered by pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of the Effect of Pr Doping on Structural, Morphological and Magnetic Properties of Nickel Ferrite

Praseodymium rare earth ion (Pr{sup 3+}) doped nickel ferrite (NiFe{sub 2−x}Pr{sub x}O{sub 4}, 0 < x< 0.1) nanocrystals (NFPO) were synthesized by hydrothermal method. The structural, morphological and magnetic properties of the prepared samples have been studied. The x-ray diffraction (XRD) and fourier transform infrared (FTIR) techniques confirmed the phase formation of the NFPO nanocrystals. The average crystallite size of NFPO nanoparticles found to be in the range 39 to 44 nm. The presence of Pr ions in NFPO was confirmed by energy-dispersive x-ray (EDX) analysis. It has been observed that after a certain amount of Pr doping, the morphology of the nanocrystals starts changing from nano-octahedrons to nanorods shape, as confirmed by transmission electron microscopy (TEM). Also, the magnetic properties of the prepared nanocrystals were measured using physical properties measurement system (PPMS) at 10 K and 300 K. The saturation magnetization (Ms) first decreases with the increasing loading amount of Pr ions up to (x = 0.025) and later it increases at both the temperatures. However, the value of coercivity shows an increasing trend with the increasing amount of Pr ions in NFPO at room temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structure, Morphology, Cation Distribution and Magnetic Properties of Cr{sup 3+}-Substituted CoFe{sub 2}O{sub 4} Nanoparticles

The present investigations deal with the effect of trivalent chromium ions (Cr{sup 3+}) on structural and magnetic properties of nanocrystalline cobalt ferrite (CoFe{sub 2}O{sub 4}) nanoparticles. The samples of CoCr{sub x}Fe{sub 2−x}O{sub 4} (where x = 0.0 to 1.0 in step of 0.2) were successfully synthesized by citric acid-assisted sol-gel auto combustion method. Further, the prepared samples were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), infrared spectroscopy (IR) and pulsed field hysteresis loop technique for structural, morphological and magnetic properties analysis, respectively. XRD patterns showed the formation of single-phase cubic spinel structure with broad Bragg’s peak for all the samples. The value of lattice parameter was found to be decreased with chromium substitution x. Cation distribution studies revealed that Co{sup 2+} and Fe{sup 3+} occupied both A and B sites, whereas Cr{sup 3+} ions occupied only B site. SEM analysis of the prepared samples confirmed the nanocrystalline nature of the material. The two absorption bands belonging to spinel structure were observed in IR spectra. Saturation magnetization (M{sub S}), remanence magnetization (M{sub r}) and coercivity (H{sub C}) was found to be decreased with increase in chromium substitution x.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Tuning the Magnetic Properties of ZnFe{sub 2}O{sub 4} Nanoparticles Through Partial Doping and Annealing

The aim of this study was to investigate the effect of annealing temperature and cobalt cation (Co{sup 2+}) doping on the magnetic properties of zinc ferrite (ZFO) nanoparticles. The nanoparticles were prepared through sol-gel combustion process with citric acid as the fuel. The obtained nanoparticles were annealed at several temperatures from 300 to 1000 °C for 2 h. Spinel formation was proved by X-ray diffraction (XRD) patterns, and the average crystallite size in all samples was estimated between 22 and 32 nm. It is worthwhile to mention that Fe{sub 2}O{sub 3} and ZnO are detected as the medium phases. Meanwhile, Fe{sub 2}O{sub 3} phase transformation to the other allotropes has happened around 400 °C and was characterized via the simultaneous thermal analysis (STA) and XRD. For higher annealing temperatures, diffusion has gradually been completed and, finally, the single phase of spinel structure was prepared at 1000 °C. In addition, field-emission scanning electron microscopy (FESEM) images revealed that the nanoparticle size after annealing was between 30 and 200 nm for the whole samples. The formation of the spinel phase was considered the most important factor on the magnetic properties of ZFO. Cobalt doping, annealing temperature, and also Fe{sub 2}O{sub 3} phase were the main factors on changing magnetic properties. Paramagnetic nanoparticles with higher coercivity for doped samples rather than un-doped samples have been obtained.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructural, Optical, and Magnetic Properties of Vanadium-Substituted Nickel Spinel Nanoferrites

The current study investigates the impact of vanadium substitution on the structural, magnetic, and optical properties of NiFe{sub 2−x}V{sub x}O{sub 4} (x ≤ 0.3) nanoparticles (NPs) produced by the cost-effective sol-gel route. The as-prepared spinel ceramic powders were examined by X-ray diffraction (XRD), UV-visible diffuse reflectance spectroscopy (DRS), Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), and vibrating sample magnetometry (VSM). The functional groups, spinel phase, and crystal structure were confirmed by XRD and FT-IR, respectively. The crystallites size decreased from 45.24 to 36.56 nm as the doping process increases. The plots of Tauc were drawn to determine optical band gap magnitudes of 1.291, 1.302, and 1.312 eV for x = 0.0, 0.2, and 0.3, respectively. The estimated saturation magnetization is maximum for pristine NiFe{sub 2}O{sub 4} NPs and decreases to minimum for NiFe{sub 1.7}V{sub 0.3}O{sub 4} NPs. The σ-H hysteresis loops have finite coercivity (between 125 and 169 Oe) and retentivity (between 9.36 and 14.04 emu/g) values. The calculated σ{sub r}/σ{sub s} ratios are lower than 0.500, assigning the uniaxial anisotropy for NiFe{sub 2−x}V{sub x}O{sub 4}. The effective anisotropy constants (K{sub eff}) are in the range of 0.824 × 10{sup 5} and 1.303 × 10{sup 5} Erg/g. The magnetocrystalline anisotropy field (H{sub a}) values are around 5.0 kOe. The characteristics of hysteresis (σ-H) curves and the order of magnetic data reveal the soft ferrimagnetic feature of as-prepared nanoparticle samples. From Mossbauer analysis, the variations in hyperfine magnetic field, quadrupole splitting, line width, and isomer shift have been evaluated. The distribution of cations showed that the octahedral B sites are occupied by all the ions of V{sup 3+}. Mossbauer spectra are composed of four Zeeman sextets and one doublet.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of Sintering Temperature on Structural, Morphological and Magnetic Properties of Strontium Ferrite Nanoparticles

In the present investigation, structural, morphological and magnetic properties of SrFe{sub 2}O{sub 4} ferrite nanoparticles prepared by a sol–gel method were studied. The techniques used in this investigation were thermogravimetric analysis/differential thermal analysis (TGA/DTA), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), field emission scanning electron microscopy (FESEM), Fourier transform infrared spectrometry (FT-IR), vibrating sample magnetometry (VSM) and Curie temperature analysis. The average crystallite sizes of the SrFe{sub 2}O{sub 4} were calculated using the Scherrer formula and found in the range of 11–22 nm, and this can be attributed to the grain growth of the particles. The lattice parameter of SrFe{sub 2}O{sub 4} nanoparticles decreased from 6.64 to 6.51 nm as the sintering temperature was raised from 600 to 900 °C. FT-IR analysis confirmed that bands in the range 430–590 cm{sup − 1} are due to the stretching vibration of oxygen atom and metal ions (M–O) that is Fe–O confirming the formation of spinel ferrite. Surface morphology of the samples has been studied using FESEM. The elemental composition along with their relative ratios was given by EDX and was found to be in agreement with their initial calculated values. The saturation magnetization, magnetic coercivity and remanence increase with an increasing sintering temperature from 600 to 900 °C. The present study reports the Curie temperature with an amount of 551 °C of the synthesized strontium nanoferrites using the Faraday technique.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructure and Magnetic Properties of Ba{sub 0.95}Y{sub 0.05}Fe{sub 12−x}Co{sub x}O{sub 19} Hexaferrites

Magnetoplumbite-type (M-type) barium ferrites doped with different Y–Co doping content Ba{sub 0.95}Y{sub 0.05}Fe{sub 12−x}Co{sub x}O{sub 19} (x = 0, 0.1, 0.2, 0.3, 0.4, and 0.5) were successfully prepared by ceramic process and investigated in this paper for the first time. X-ray diffraction were used to analyze the phase of the prepared sample. The scanning electron microscopy (SEM) was used to measure the morphology, and magnetic properties were measured by vibrating sample magnetometer (VSM). The results of XRD show that the single phase of M-type barium ferrites was obtained with the increase of Co content (x), but α-Fe{sub 2}O{sub 3} occurred when x exceeds 0.3. The SEM results exhibit the uniform plane hexagonal structures of M-type ferrites with all range of Co doping content. VSM results display that magnetization (M{sub s}) and coercivity (H{sub c}) show the same tendency that their values first increase and then decrease with the increase of Co content.

36 MATERIALS SCIENCE↗

Thermal Decomposition Synthesis of MgFe{sub 2}O{sub 4} Nanoparticles for Magnetic Hyperthermia

In this work, the effects of the thermal decomposition temperature and time on the structure, cation distributions, magnetic properties, and AC magnetically induced heating characteristics of MgFe{sub 2}O{sub 4} nanoparticles were investigated. The structure and cation distributions between the tetrahedral and octahedral sites determined by X-ray diffraction method showed single-phase MgFe{sub 2}O{sub 4} nanoparticles had a partially inverse structure. The inversion coefficient increased using high reaction temperature and time. The square-like shape and small magnesium ferrite nanoparticles with narrow particle size distribution were synthesized at high reaction temperatures, as observed by transmission electron microscopy. Magnetic properties of MgFe{sub 2}O{sub 4} nanoparticles studied by vibrating sample magnetometry showed the ferrimagnetic characteristics with the highest saturation magnetization of 24 emu/g at a reaction temperature of 300 °C for 60 min. Furthermore, the AC magnetically induced heating characteristics of MgFe{sub 2}O{sub 4} nanoparticles were correlated to the saturation magnetization and coercivity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetic and Kinetical Properties of Fe-27%Ni-4%Mn and Fe-27%Ni-4%Mn-2%Zn Alloys Investigated by VSM and DSC

We report on the structural, thermal, and magnetic properties of thermally induced martensite in Fe-27%Ni-4%Mn and Fe-27%Ni-4%Mn-2%Zn alloys. Scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and vibrating sample magnetometry (VSM) techniques were employed in the present research. SEM observations revealed the lath martensite morphology formation in both Fe-27%Ni-4%Mn and Fe-27%Ni-4%Mn-2%Zn alloys. As well, the thermally induced martensite start temperature (M{sub s}) was determined to be − 27.18 °C for Fe-27%Ni-4%Mn and − 40.63 °C for Fe-27%Ni-4%Mn-2%Zn alloy from DSC measurements. Further, the Curie temperature was detected at 160 K for Fe-27%Ni-4%Mn and 196 K for Fe-27%Ni-4%Mn-2%Zn alloys after VSM measurements where magnetic saturation values were measured at 20 emu g{sup − 1} for Fe-27%Ni-4%Mn alloy and 18 emu g{sup − 1} for Fe-27%Ni-4%Mn-2%Zn alloy, respectively. The coercivity value of the alloys was also found to be 0.082 kOe for Fe-27%Ni-4%Mn and 0.050 kOe for Fe-27%Ni-4%Mn-2%Zn alloys. Finally, the effect of Zn addition to the austenite–martensite phase tarnsformations of Fe-27%Ni-4%Mn was discussed in detail according to structural, thermal, and magnetic properties of both alloys after a quantitative experimental comparison.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Effects of La Doping on the Crystal Structure, Magnetic, and Microwave Absorption Properties of Nd{sub 2}Fe{sub 14}B Compound

The crystal structure, magnetic, and microwave absorption properties of the (Nd{sub 1−x}La{sub x}){sub 2}Fe{sub 14}B system have been investigated. The La{sub 2}Fe{sub 14}B compound was successfully synthesized and refined, giving a tetragonal structure, space group P4{sub 2}/mnm with the Nd{sub 2}Fe{sub 14}B-type structure. The crystal structure parameters of the (Nd{sub 1−x}La{sub x}){sub 2}Fe{sub 14}B compounds were determined by full-profile Rietveld refinements. The results revealed that all intermediate alloys form a continuous solid solution. The normalized lattice parameters of the (Nd{sub 1−x}La{sub x}){sub 2}Fe{sub 14}B compounds increase linearly with an increase of La concentration. Based on the results of DSC measurements and X-ray powder diffraction examinations, the phase diagram of the Nd{sub 2}Fe{sub 14}B-La{sub 2}Fe{sub 14}B system has been constructed. The remanence (M{sub r}) and coercivity (H{sub c}) of (Nd{sub 1−x}La{sub x}){sub 2}Fe{sub 14}B (x = 0.00, 0.10, 0.20, 0.30, and 0.40) gradually decrease. The highest reflection loss is − 29.8, − 27.4, − 24.1, − 18.6, and − 14.2 dB at 9.8, 8.9, 7.5, 6.9, and 6.5 GHz, respectively. The absorption peak shifts toward from higher frequency region to lower frequency region and the absorption bandwidth widens with the increase of the La substitution.

36 MATERIALS SCIENCE↗

Effect of Synthesis Approaches and Morphological Properties on Dielectric Enhancement and Microwave Absorption of Fe{sub 3}O{sub 4}/PANI Nanocomposites

In the present work, Fe{sub 3}O{sub 4} spherical (Fe{sub 3}O{sub 4}-cop) and raspberry-like (Fe{sub 3}O{sub 4}-hyd) nanoparticles were synthesized via co-precipitation and hydrothermal routes, respectively. Fe{sub 3}O{sub 4}/polyaniline (PANI) nanocomposites were prepared by in situ oxidative polymerization of aniline monomer in the presence of the Fe{sub 3}O{sub 4} materials. Characterization of the nanocomposites by XRD, FT-IR, FESEM, and TEM techniques revealed a core/shell structure for Fe{sub 3}O{sub 4}-hyd/PANI, unlike the PANI blocks with embedded Fe{sub 3}O{sub 4} and γ-Fe{sub 2}O{sub 3} observed in Fe{sub 3}O{sub 4}-cop/PANI composites. The larger and pure magnetite nanoparticles produced with the hydrothermal process and the respective nanocomposite with PANI possess higher magnetization and coercivity values, according to the magnetic investigation with VSM. Moreover, according to the electromagnetic characterization in the X-band, the Fe{sub 3}O{sub 4}-hyd/PANI nanocomposite exhibits the highest complex permittivity level, as a consequence of increased interfacial polarization in the Fe{sub 3}O{sub 4}-hyd/PANI system. On this account, reflection loss measurements have shown the superior microwave absorption capability of Fe{sub 3}O{sub 4}-hyd/PANI composite, compared with Fe{sub 3}O{sub 4}-cop/PANI, with a measured maximum of −31.28 dB at 8.5 GHz for 3.5 mm layer thickness.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and Characterization of Nickel-Substituted Cobalt Ferrite Nanoparticles Using Sol–Gel Auto-combustion Method

In the present work, Co{sub 1−x}Ni{sub x}Fe{sub 2}O{sub 4} (x = 0.02, 0.04, and 0.06 M) is prepared by sol–gel auto-combustion method and its structural, functional, magnetic, and morphological characteristics are analyzed. The peaks corresponding to the plane observed from XRD matches with JCPDS data of CoFe{sub 2}O{sub 4} (22-1086) and NiFe{sub 2}O{sub 4} (10-0325). It is noted that the average crystallite size decreases from 31 to 27 nm when the nickel concentration increases from 0.02 to 0.06 M, indicative of the incorporation of Ni{sup 2+} ion in the cobalt ferrite lattice. FTIR analysis shows the presence of M↔O vibration at the tetrahedral and octahedral sites. Micro - Raman spectroscopy shows the stretching vibrations at 486.87 cm{sup − 1} (E{sub g}) and 696.96 cm{sup − 1} (A{sub 1g}), which are the characteristic vibrations of spinel ferrites. Magnetic studies show the variation in saturation magnetization (M{sub S} = 20.25, 9.41, 18.5 emu/g.) and coercivity (H{sub C} = 746.06, 953.03, 885.59 Oe) when the concentration of Ni{sup 2+} ion increases from 0.02 to 0.06 M. The prepared nanoparticles show a ferromagnetic nature which is attributed to the creation of an antiparallel spin and the magnetic moment created by the cation at tetrahedral and octahedral sites. The surface morphology of samples is imaged by a field emission scanning electron microscope.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Phase and Grain Size Dependence of the Pinning Strength of Nanocomposite Magnets

The pinning of grain interfaces plays an important role in determining the coercivity of nanocomposite magnets. Here, based on pinning effect, a simple model was proposed to correlate the pinning strength with microstructural parameters. A structural factor K has been used to describe the contribution of the phase composition and grain size of hard and soft phases to pinning strength. The model can be used to estimate the pinning strength of nanocomposite magnets, which is important for the design and fabrication of nanocomposite magnets with high coercivity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetic Evaluation of the Nanoparticles Coated with Polyvinylpyrrolidone and Polyvinyl Chloride Nanoparticles Synthesized by Electro-deposition Method for Hyperthermia Application

Fe{sub 3}O{sub 4} nanoparticles, coated with polyvinylpyrrolidone (PVP) + polyvinyl chloride (PVC), were synthesized using cathodic electrochemical deposition (CED) technique. Physical properties of the uncoated and PVP + PVC-coated nanoparticles were investigated using several methods including X-ray diffraction (XRD), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), Fourier transform infrared (FT-IR), and AC susceptometer. In both the samples, single-phase formation in cubic spinel structure is detected in the XRD analysis. In this study, the mean crystallite size of the prepared specimens is found to be varied from 10.2 to 8.7 nm after PVP + PVC coating. The results of the FT-TR test thoroughly verified the existence of PVP/PVC layer onto the surface of the electrodeposited NPs, and magnetic results also confirmed a superparamagnetic (SPM) behavior at room temperature for both of them. Coercivity and magnetization saturation reduction have also been observed, despite having lower grain size. Also, weak magnetic interactions of inter-particle and a superspin glass-like behavior at low temperatures are confirmed. In addition, increasing of PVP + PVC content on the surface coating of the magnetic nanoparticles has decreased the inter-particle interactions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructure and Magnetic Properties of Exchange-Coupled Co{sub 72}Pt{sub 28}/Pt/Co{sub 81}Ir{sub 19} Composite Media for Perpendicular Magnetic Recording

In this work, we report the investigation of microstructure and magnetic properties of the Co{sub 72}Pt{sub 28}/Pt/Co{sub 81}Ir{sub 19} exchange-coupled composite (ECC) media using soft-layer (SL) of Co{sub 81}Ir{sub 19} with negative magnetocrystalline anisotropy (MA). Our TEM images show that the hard-layer (HL) exhibits a columnar type microstructure with well-isolated grains and the exchange-coupled SL with hcp-structure show the same texture. Strong coupling of the two layers have been evidenced by the magnetic characterization for all the studied films with Pt inter-layer thickness ranging from 0 to 2 nm. Importantly, these ECC media films have much lower coercivities and much higher thermal stabilities in the favor of high-density magnetic recording.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and Magnetic Behavior of BaAl{sub x}Cr{sub y}Fe{sub 11}O{sub 19} (x + y = 1) Hexagonal Ferrites

The present study aims to analyze barium hexagonal ferrite and its derivation behavior using sol-gel auto-combustion co-doped with Al{sup 3+}/Cr{sup 3+}ions. Also, the effects of dopants on structural and magnetic properties of prepared samples were investigated. To this purpose, the finest powders were preheated at 500 °C for 1 h and calcinated at 900 °C about 2 h. Then, the magnetic powders were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), and vibrating sample magnetometer (VSM). The XRD patterns show the magnetoplumbite phase. According to the Scherrer equation applied, inserting ions led to a decrease in lattice parameters (a and c) and crystallite size. The morphology of synthesized samples was observed by FESEM and proved the hexagonal shapes of the prepared samples. The nanoparticles sizes were recorded between 59 and 79 nm. Moreover, the magnetic properties of prepared samples were specified by VSM. The saturation magnetization (M{sub s}) and remnant magnetization (M{sub r}) of the synthesized magnetic powders were decreased by inserting Al{sup 3+}/Cr{sup 3+} ions, while coercivity (H{sub c}) increased from 5215 to 7178 Oe. .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modified Magnetic and Electrical Properties of Perovskite-Spinel Multiferroic Composites

Multiferroic composite samples (1 − x) Bi{sub 0.9}Pr{sub 0.1}FeO{sub 3}–xNi{sub 0.5}Co{sub 0.5}Fe{sub 2}O{sub 4} for x = 0, 0.1, 0.2, 0.3, and 1.0 were synthesized by sol-gel auto-combustion method. Detailed investigations were made on the structural, magnetic, and electrical properties of these composites. The X-ray diffraction (XRD) patterns confirm the co-existence of perovskite BPFO and spinel ferrite NCFO without any impurity phase. The average particle size of BPFO and NCFO nanoparticles is nearly equal to 110 nm and 35 nm respectively which are confirmed by XRD and transmission electron microscopy (TEM) analysis. Structural and surface morphology are studied by scanning electron microscopy (SEM). The dielectric properties of the composites are also studied at room temperature. The saturation and remnant magnetization are found to increase with increase in NCFO weight percentage in the composites. The saturation magnetization (Ms) values are 3.38 emu/g, 8.65 emu/g, and 13.87 emu/g and coercivity (Hc) values are 936.52 Oe, 1058.12 Oe, and 1046.77 Oe for BPFO-NCFO 1, 2, and 3 composite samples respectively. The incorporation of BPFO and NCFO enhances the multiferroic properties in the present composite materials which are quite promising for applications point of view.

36 MATERIALS SCIENCE↗