Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CITRIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Aconitic acid exporter (aexA) increases organic acid production in Aspergillus

Recombinant Aspergillus genetically modified to increase expression of g8846, renamed herein as aconitic acid exporter (aexA), are provided, which in some examples are also genetically inactivated for an endogenous cis-aconitic acid decarboxylase (cadA) gene. Such recombinant Aspergillus produce more aconitic acid as compared to native Aspergillus. Also provided are methods of using such recombinant Aspergillus to increase production of aconitic acid and other organic acids, such as citric acid, itaconic acid, and 3-hydroxypropionic acid (3-HP).

Deng, Shuang↗

The characteristic of carbon-coated LiFePO{sub 4} as cathode material for lithium ion battery synthesized by sol-gel process in one step heating and varied pH

This research has been done on the synthesis of carbon coated LiFePO{sub 4} through sol-gel process. Carbon layer serves for improving electronic conductivity, while the variation of pH in the sol-gel process is intended to obtain the morphology of the material that may improve battery performance. LiFePO{sub 4}/C precursors are Li{sub 2}CO{sub 3}, NH{sub 4}H{sub 2}PO{sub 4} and FeC{sub 2}O{sub 4}.H{sub 2}O and citric acid. In the synthesis process, consisting of a colloidal suspension FeC{sub 2}O{sub 4}.H{sub 2}O and distilled water mixed with a colloidal suspension consisting of NH{sub 4}H{sub 2}PO{sub 4}, Li{sub 2}CO{sub 3}, and distilled water. Variations addition of citric acid is used to control the pH of the gel formed by mixing two colloidal suspensions. Sol in this study had a pH of 5, 5.4 and 5.8. The obtained wet gel is further dried in the oven and then sintered at a temperature 700°C for 10 hours. The resulting material is further characterized by XRD to determine the phases formed. The resulting powder morphology is observed through SEM. Specific surface area of the powder was tested by BET, while the electronic conductivity characterized with EIS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aerosol Synthesis of Highly Dispersed Y{sub 3}Al{sub 5}O{sub 12}:Ce{sup 3+} Phosphor with Intense Photoluminescence

A simple method of pyrolysis of an aerosol solution of yttrium, aluminum, and cerium nitrates with the addition of urea or citric acid, followed by brief annealing, is developed to obtain a highly dispersed aluminum–yttrium garnet powder that demonstrates intense photoluminescence in the visible light region. Characterization of the synthesized samples (photoluminescence spectra, X-ray diffraction analysis, Raman spectra) showed that intense photoluminescence is achieved only in a narrow window of process conditions, namely, the concentration of nitrate solution and the concentration of citric acid or urea. The photoluminescence intensity increases upon annealing synchronously with an increase in the crystallite size, which, along with the optimal cerium concentration (~0.5 at %), is a determining factor for obtaining high-quality samples. The synthesized powders had intense photoluminescence and high optical perfection, as evidenced by the observation of whispering gallery modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis of copper quantum dots by chemical reduction method and tailoring of its band gap

Metallic copper nano particles are synthesized with citric acid and CTAB (cetyltrimethylammonium bromide) as surfactant and chlorides as precursors. The particle size and surface morphology are analyzed by High Resolution Transmission Electron Microscopy. The average size of the nano particle is found to be 3 - 10 nm. The optical absorption characteristics are done by UV-Visible spectrophotometer. From the Tauc plots, the energy band gaps are calculated and because of their smaller size the particles have much higher band gap than the bulk material. The energy band gap is changed from 3.67 eV to 4.27 eV in citric acid coated copper quantum dots and 4.17 eV to 4.52 eV in CTAB coated copper quantum dots.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Preparation and characterization of nanocrystalline CuO powders with the different surfactants and complexing agent mediated precipitation method

Highlights: • CuO nanostructures by surfactants mediated method. • Structural and optical properties of CuO nanostructures changes under the effect of surface modifier. • Citric acid assisted is the best, in terms of size, morphology and optical properties than that of CTAB, SDS and PEG-400. - Abstract: Nanostructures of copper oxide (CuO) was synthesized into crystallite sized ranging from 20 to 50 nm in the presence of different surfactants, and complex agent such as cityl tri methyl ammonium bromide (CTAB), sodium do decyl sulfate (SDS), poly ethylene glycol (PEG-400) and citric acid via a precipitation route. Variations in several parameters and their effects on the structural and optical properties of CuO nanostructures (crystallite size, morphology and band gap) were investigated by XRD, FTIR, SEM and UV analysis. The UV–visible absorption spectra of the different surfactants and complexing agent assisted CuO nanostructures indicates that the estimated optical band gap energy value (1.94–1.98 eV) is higher than that of the bulk CuO value (1.4 eV), which is attributed to the quantum confinement effect. The formation mechanism of different surfactants and complexing agent assisted CuO nanostructures is also proposed.

36 MATERIALS SCIENCE↗

Synthesis of {beta}-phase Ag{sub 1-x}Cu{sub x}I (x = 0-0.5) solid solutions nanocrystals

Research highlights: {yields} Wet-chemical-chelating reaction processing has been used to synthesized A series of single {beta}-phase nano-Ag{sub 1-x}Cu{sub x}I (x = 0-0.5) solid solutions powders. {yields} Citric acid as complexing agent takes part in the process of chemical reaction and the chemical reactions can be described in this paper. {yields} The lattice parameters have been ascertained by the results of XRD. {yields} Crystalline sizes, which decrease with copper iodide concentration increasing, have been demonstrated by XRD and TEM. -- Abstract: A series of single {beta}-phase nano-Ag{sub 1-x}Cu{sub x}I (x = 0-0.5) solid solutions powders were synthesized by wet-chemical-chelating reaction processing and citric acid used as complexing agent. The Ag{sub 1-x}Cu{sub x}I powders were determined by X-ray diffraction and transmission electron microscopy. It was demonstrated that the crystalline size and lattice parameter of the Ag{sub 1-x}Cu{sub x}I powders decrease with an increase in the amount of CuI substitution. The copper in the lattice of the Ag{sub 1-x}Cu{sub x}I can effectively prevent the crystalline growth of the Ag{sub 1-x}Cu{sub x}I powders and citrate used in the Ag{sub 1-x}Cu{sub x}I powders synthesized process can accelerate single {beta}-phase crystalline structure formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New metal-organic frameworks of [M(C{sub 6}H{sub 5}O{sub 7})(C{sub 6}H{sub 6}O{sub 7})(C{sub 6}H{sub 7}O{sub 7})(H{sub 2}O)] . H{sub 2}O (M=La, Ce) and [Ce{sub 2}(C{sub 2}O{sub 4})(C{sub 6}H{sub 6}O{sub 7}){sub 2}] . 4H{sub 2}O

Two novel materials, [M(C{sub 6}H{sub 5}O{sub 7})(C{sub 6}H{sub 6}O{sub 7})(C{sub 6}H{sub 7}O{sub 7})(H{sub 2}O)] . H{sub 2}O (M=La(1a), Ce(1b)) and [Ce{sub 2}(C{sub 2}O{sub 4})(C{sub 6}H{sub 6}O{sub 7}){sub 2}] . 4H{sub 2}O (2), with a metal-organic framework (MOF) were prepared with hydrothermal reactions and characterized with photoluminescence, magnetic susceptibility, thermogravimetric analysis and X-ray powder diffraction in situ. The crystal structures were determined by single-crystal X-ray diffraction. Compound 1 crystallized in triclinic space group P1-bar (No. 2); compound 2 crystallized in monoclinic space group P2{sub 1}/c (No. 14). The structure of 1 is built from a 1D MOF, composed of deprotonated citric ligands of three kinds. Compound 2 contains a 2D MOF structure consisting of citrate and oxalate ligands; the oxalate ligand arose from the decomposition in situ of citric acid in the presence of Cu{sup II} ions. Photoluminescence spectra of compounds 1b and 2 revealed transitions between the 5d{sup 1} excited state and two levels of the 4f{sup 1} ground state ({sup 2}F{sub 5/2} and {sup 2}F{sub 7/2}). Compounds 1b and 2 containing Ce{sup III} ion exhibit a paramagnetic property with weak antiferromagnetic interactions between the two adjacent magnetic centers. - Graphical Abstract: [M(C{sub 6}H{sub 5}O{sub 7})(C{sub 6}H{sub 6}O{sub 7})(C{sub 6}H{sub 7}O{sub 7})(H{sub 2}O)] . H{sub 2}O (M=La(1a), Ce(1b)) and [Ce{sub 2}(C{sub 2}O{sub 4})(C{sub 6}H{sub 6}O{sub 7}){sub 2}] . 4H{sub 2}O (2)-with 1D and 2D structures were synthesized and characterized. Highlights: Black-Right-Pointing-Pointer Two MOF - [M(C{sub 6}H{sub 5}O{sub 7})(C{sub 6}H{sub 6}O{sub 7})(C{sub 6}H{sub 7}O{sub 7})(H{sub 2}O)] . H{sub 2}O (M=La(1a), Ce(1b)) and [Ce{sub 2}(C{sub 2}O{sub 4})(C{sub 6}H{sub 6}O{sub 7}){sub 2}] . 4H{sub 2}O (2) - with 1D and 2D structures. Black-Right-Pointing-Pointer The adjacent chains of the 1D framework were correlated with each other through an oxalate ligand to form a 2D layer structure. Black-Right-Pointing-Pointer The source of the oxalate ligand was the decomposition in situ of citric acid oxidized in the presence of Cu{sup II} ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Advanced Analysis of X-ray Fluorescence Measurements of the Interfacial Density of Eu Ions at Liquid–Liquid Interfaces for Solvent Back-Extraction

X-ray fluorescence near total reflection (XFNTR) is the primary technique used to measure the element-specific interfacial density of ions at liquid−liquid interfaces. Fluorescence from ions in the bulk liquids can complicate the determination of the interfacial density; consequently, measurements have been previously limited to samples without ions in the upper phase and with concentrations on the order of 10 μM or less in the lower phase. We modify the analysis of XFNTR data to account for ions in both bulk phases, then demonstrate its use in the context of rare-earth separations processes. In a model of ion stripping (i.e., back-extraction), dodecane solutions of di(2-ethylhexyl)- phosphoric acid (HDEHP) loaded with Eu(III) at the 1 mM level are placed in contact with either pure water or aqueous solutions of nitric or citric acid at pH 3. XFNTR measurements of equilibrated, quiescent samples reveal that citric acid solutions produce a disproportionately large depletion of ions from the interface compared to that from the bulk organic solution, whereas stripping by pure water or nitric acid solutions is negligible. As a result, this advance in the methodology of XFNTR may have broad applicability to the investigation of metal ions in chemical and biological processes at liquid−liquid interfaces.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Crystallization kinetics and densification of YAG nanoparticles from various chelating agents

Yttrium aluminium garnet (YAG, Y{sub 3}Al{sub 5}O{sub 12}) nanoparticles were prepared using sonochemical sol-gel method with three different chelating agents and the effect of crystallization kinetics was investigated with differential scanning calorimetry-thermogravimetry (DSC-TG). The activation energy values of crystallization for the as-synthesized YAG nanoparticles using citric acid (CA), glycine (G) or a mixture of citric acid-glycine (CA-G), as chelating agents were found to be 160.5, 142.2 and 140.4 kJ mol{sup -1} and the corresponding Avarami constants were 2.2, 2.1 and 1.9, respectively. Samples produced with the mixed chelating agent under sonification, could be crystallized to single phase YAG nanoparticles (10-65 nm) after annealing at 1100 deg. C. Pellets made from the annealed YAG particles could be sintered to a relative density greater than 99% at 1500 deg. C with a grain size of 4.5 {mu}m, made up of secondary particles formed from primary nano-crystals within the grains. Grain size and relative density increased with different chelating agents from CA to G and CA-G in the increasing order when YAG samples were sintered. Grain growth and densification occurred at a relatively low temperature of 1500 deg. C as compared to over 1800 deg. C in solid-state reactions.

36 MATERIALS SCIENCE↗

Organic Acid Aerosol Measurements from the Mount Airy Site for CoURAGE

This study investigates the prevalence and distribution of organic acid aerosols in a rural environment using filter-based measurements collected in Mount Airy, Maryland, during the CoURAGE campaign from March 19th through June 12th 2025. PM2.5 filters quantify a range of organic acids commonly associated with secondary organic aerosol formation and atmospheric oxidation processes. Each filter was collected using a 15 LPM sampler and was extracted in ultrapure Millipore water (>18 MΩ), allowing water-soluble organic acids to be extracted into solution for analysis. The extracts were then examined using a Waters Acquity I-Class PLUS liquid chromatography system coupled to a Bruker Maxis-II ultra-high-resolution Q-TOF mass spectrometer with electrospray ionization, providing high-sensitivity detection and separation of target compounds. Concentrations of several key organic acids were quantified, including acetic, propionic, pyruvic, butyric, oxalic, isovaleric, valeric, malonic, maleic, succinic, glutaric, malic, adipic, and citric acids. These findings contribute to ongoing efforts to understand regional aerosol composition and their impacts on aerosol-cloud interactions.

Acetic acid↗

Metabolic Response to Stress by the Immature Right Ventricle Exposed to Chronic Pressure Overload

Background: The right ventricle (RV) exposed to chronic pressure overload exhibits hypertrophy and decompensates when exposed to stress. We hypothesize that impaired ability to increase myocardial oxidative flux through pyruvate dehydrogenase (PDH) leads to hypertrophied RV dysfunction when exposed to hemodynamic stress, and PDH stimulation can improve RV function. Methods and Results: Infant male Yorkshire piglets (13.5 ± 0.6 kg weight, n = 19) were used to assess substrate fractional contribution to the citric acid cycle after sustained pulmonary artery banding (PAB). Carbon 13-labeled glucose, lactate, and leucine, oxidative substrate tracers for the citric acid cycle, were infused into right coronary artery on 7-10 days after PAB. RV systolic pressure, RV free wall thickness and individual cardiomyocyte cell size after PAB were significantly elevated compared to Sham. Both fractional glucose and lactate oxidations in PAB group were > 2-fold higher than in Sham. Pigs with overdrive atrial pacing (~80% increase in heart rate) stress after PAB showed only 22% increase in rate-pressure product (RPP) from the baseline before atrial pacing and the limited carbohydrate oxidation rate in RV. Intracoronary infusion of dichloroacetate, a PDH agonist produced higher RPP (59% increase) in response to increased work-load by atrial pacing in association with a marked increase in lactate oxidation. Conclusions: The immature hypertrophied RV shows limited ability to increase carbohydrate oxidation in response to tachycardic stress leading to energy supply/utilization imbalance and decreased systolic function. Enhanced PDH activation by dichloroacetate increases energy supply and preserves hypertrophied RV contractile function during hemodynamic stress.

myocardial metabolism, congenital heart disease, r↗

Intracellular performance of tailored nanoparticle tracers in magnetic particle imaging

Magnetic Particle Imaging (MPI) is a quantitative mass-sensitive, tracer-based imaging technique, with potential applications in various cellular imaging applications. The spatial resolution of MPI, in the first approximation, improves by decreasing the full width at half maximum (FWHM) of the field-derivative of the magnetization, dm/dH of the nanoparticle (NP) tracers. The FWHM of dm/dH depends critically on NPs’ size, size distribution, and their environment. However, there is limited information on the MPI performance of the NPs after their internalization into cells. In this work, 30 to 150 μg of the iron oxide NPs were incubated in a lysosome-like acidic buffer (0.2 ml, 20 mM citric acid, pH 4.7) and investigated by vibrating sample magnetometry, magnetic particle spectroscopy, transmission electron microscopy, and dynamic light scattering (DLS). The FWHM of the dm/dH curves of the NPs increased with incubation time and buffer to NPs ratio, consistent with a decrease in the median core size of the NPs from ∼20.1 ± 0.98 to ∼18.5 ± 3.15 nm. Further, these smaller degraded NPs formed aggregates that responded to the applied field by hysteretic reversal at higher field values and increased the FWHM. The rate of core size decrease and aggregation were inversely proportional to the concentration of the incubated NPs, due to their slower biodegradation kinetics. The results of this model experiment show that the MPI performance of the NPs in the acidic environments of the intracellular organelles (i.e., lysosomes and endosomes) can be highly dependent on their rate of internalization, residence time, and degradation.

60 APPLIED LIFE SCIENCES↗

Enhanced itaconic acid production in Aspergillus with increased LaeA expression

Fungi, such as Aspergillus niger, having a dolichyl-P-Man:Man(5)GlcNAc(2)-PP-dolichyl mannosyltransferase (Alg3) gene genetic inactivation, increased expression of a loss of aflR expression A (LaeA), or both, are described. In some examples, such mutants have several phenotypes, including an increased production of citric acid relative to the parental strain. Methods of using the disclosed fungi to make citric acid are also described, as are compositions and kits including the disclosed fungi. Further described are Aspergillus terreus fungi overexpressing the LaeA gene and the use of such fungi for the production of itaconic acid.

59 BASIC BIOLOGICAL SCIENCES↗

One-step synthesis of novel biacidic carbon via hydrothermal carbonization

The novel biacidic carbon has been synthesized via one-step hydrothermal carbonization of glucose, citric acid, and hydroxyethylsulfonic acid at 180 {sup o}C for only 4 h. The novel carbon had an acidity of 1.7 mmol/g with the carbonyl to sulfonic acid groups molar ratio of 1:3, which was confirmed by IR, XPS, TPD, SEM, and BET analyses. The catalytic activities of the carbon were investigated through esterification and oxathioketalization. The results showed that the carbon owned the comparable activities to sulfuric acid, which indicated that the carbon holds great potential for the green processes. - Graphical abstract: The novel biacidic carbon has been synthesized via one-step hydrothermal carbonization. Both the sulfonic and carbonyl acid groups were introduced to the carbon during the carbonization processes.

36 MATERIALS SCIENCE↗

Microwave growth and tunable photoluminescence of nitrogen-doped graphene and carbon nitride quantum dots

Tunable photoluminescent nitrogen-doped graphene and graphitic carbon nitride (g-C 3 N 4 ) quantum dots are synthesized via a facile solid-phase microwave-assisted (SPMA) technique utilizing the pyrolysis of citric acid and urea precursors. The atomic ratio, surface functionalization, and atomic structure of as-prepared quantum dots strongly depend on the ratio of citric acid to urea. The quantum dots have a homogeneous particle size and tend to form a circle and/or ellipse shape to minimize the edge free energy. The atomic ratio of surface nitrogen to carbon (N/C) in the quantum dots can reach as high as 1.74, among the highest values reported in the literature. The SPMA technique is capable of producing high-quality quantum dots with photoluminescence (PL) emission at various wavelengths on a pilot scale. The atomic structures of the N-doped graphene and g-C 3 N 4 quantum dots are investigated using molecular dynamics simulations. Increasing the urea concentration increases the tendency of in-plane N ( i.e. , quaternary N) substitution over that of other amino functionalizations, such as pyrrolic and pyridinic N. The PL emission can be precisely tuned via a one-step SPMA method by adjusting the precursor composition. A high quantum yield of 38.7% is achieved with N-doped graphene quantum dots, indicating the substantial influence of the N- and O-rich edge groups on the enhancement of PL efficiency. A bandgap structure is introduced to describe the interstate (π*–π) transition of quantum dots. This work presents a novel approach for engineering the chemical composition and atomic structure of graphene and g-C 3 N 4 quantum dots, facilitating their research and applications in optical, electronic, and biomedical devices.

36 MATERIALS SCIENCE↗

Nonhazardous acid etches weld samples

Nonhazardous citric acid solution used with 24 volt dc power supply etches weld samples. This etching method is limited to 300 stainless steel and a small range of other high temperature alloys.

Allen, B. C↗