SEARCH · Engineering Papers
Results for “Brady”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Magnetic structure and magnetodielectric behavior of the chiral magnet CoTeMoO 6
We investigate the magnetic structure and magnetodielectric behavior of the chiral magnet CoTeMoO 6 (CTMO) through neutron diffraction, magnetization, and magnetodielectric measurements, complemented by density functional theory (DFT) calculations. Our findings reveal a canted magnetic structure with moments confined to the ab plane, giving rise to weak ferromagnetism under an external magnetic field. Additionally, we observe magnetodielectric coupling that strongly correlates with the magnetic ordering temperature and magnetic structure. Furthermore, these results are discussed in the context of potential mechanisms involving spin-dependent p-d hybridization and spin-phonon coupling.
The effect of cerium, neodymium, and ytterbium doping on UO 2 dissolution
Here, the dissolution rate of spent nuclear fuel has been studied heavily to understand the impacts of a failed waste package scenario on potential radionuclide release from a geologic repository. Multiple countries have evaluated these scenarios in oxidizing and reducing environments respective to their relevant repository conditions. The repository environment (e.g., water chemistry, temperature, oxygen content) and the fuel itself (e.g., chemical content of the fuel) both heavily impact the dissolution rate of the spent fuel. This work examined the impact that rare earth element dopants (Ce, Nd, Yb) have on the fuel dissolution under repository relevant conditions with decreasing oxidizing conditions using a single pass flowthrough system. UO 2 samples were doped with Ce, Nd, or Yb with concentrations between 1 and 5 at%. The addition of dopants to the samples reduced the dissolution rates on most samples relative to pure UO 2 samples. Scoping experiments that occurred in a less oxidizing environment showed a reduction in dissolution rate compared to fully oxidizing conditions. The results within highlight the importance of dopant behavior in used fuel dissolution modeling.
Occupant-driven end use load models for demand response and flexibility service participation of residential grid-interactive buildings
As demand response becomes increasingly used as a tool to support improved grid flexibility, it is important to consider that there are many potential types of energy end uses that may be used to support such flexibility. Residential appliances, often accounting for 30 % or more of residential energy use, are a currently untapped source of demand flexibility, particularly when aggregated together across homes. To date there has been very limited analysis of residential appliances for use as grid-interactive loads. As such, this research uses disaggregated energy end use data for 564 households, to model the electricity demand flexibility potential of the use of residential dishwashers, clothes washers, clothes dryers, ovens, and ranges (oven + stovetop) on both weekdays and weekends. This includes both at the building level, as well as aggregated to the grid level, specifically the Midcontinent Independent System Operator (MISO) region. This study was divided into two parts. Part 1 focuses on determining appliance-level loads, and Part 2, which involves aggregation to the grid. Findings suggest that among the studied appliances, clothes dryers provide the greatest demand reduction potential for most times of the day, followed by dishwashers and clothes washers. The maximum potential reduction for clothes dryers is found to be approximately at 11:00 a.m. and this potential sustains throughout most of the daytime period. When considering the willingness of households to participate, based on a survey of households in the Midwest region, clothes dryers still have the most potential for demand reduction. The availability of appliances for load modulation on weekdays and weekends indicates similar load reduction potential for all appliances. Overall, the results of this study suggest that there is an opportunity for shifting appliance usage to optimize grid efficiency and enhance demand response strategies.
Identification of a pharmacological approach to reduce ACE2 expression and development of an in vitro COVID-19 viral entry model
Because of rapid emergence and circulation of the SARS-CoV-2 variants, especially Omicron which shows increased transmissibility and resistant to antibodies, there is an urgent need to develop novel therapeutic drugs to treat COVID-19. In this study we developed an in vitro cellular model to explore the regulation of ACE2 expression and its correlation with ACE2-mediated viral entry. We examined ACE2 expression in a variety of human cell lines, some of which are commonly used to study SARS-CoV-2. Using the developed model, we identified a number of inhibitors which reduced ACE2 protein expression. The greatest reduction of ACE2 expression was observed when CK869, an inhibitor of the actin-related protein 2/3 (ARP2/3) complex, was combined with 5-(N-ethyl-N-isopropyl)-amiloride (EIPA), an inhibitor of sodium-hydrogen exchangers (NHEs), after treatment for 24 h. Using pseudotyped lentivirus expressing the SARS-CoV-2 full-length spike protein, we found that ACE2-dependent viral entry was inhibited in CK869 + EIPA-treated Calu-3 and MDA-MB-468 cells. This study provides an in vitro model that can be used for the screening of novel therapeutic candidates that may be warranted for further pre-clinical and clinical studies on COVID-19 countermeasures.
Local molecular environment drives speciation and reactivity of ion complexes in concentrated salt solution
The speciation and reactivity of aqueous salt solutions are important for a wide variety of applications. However, application of this information is inhibited by broad disagreement about composition, mechanisms, and structure in concentrated solutions especially. Here, neutron diffraction with isotopic substitution measurements on aqueous zinc chloride solutions are used to calibrate molecular dynamics simulations that include effective electronic polarization. This allows us to probe the origin of speciation and reactivity of zinc chloride-water ion complexes, ZnCl x (H 2 O) y 2-x (x ≤ 4 and y ≤ 6), by comparing the reactivity of species in concentrated (4.5 m) and dilute (0.01 m) conditions. Within the concentrated solution, it is found that the extended solvation environment is dominated by solvent-separated ion complexes whose presence increases the free energy of activation for interconversion of species while simultaneously enhancing their thermodynamic stability. This concentration-dependent reactivity and stability suggests that other reactions, such as the nucleation of solid phases, will also be affected.
Minor titanium addition markedly improves the co-deformability of copper-tantalum composites
We investigated the microstructures of equal channel angular extrusion (ECAE) processed sintered composites of copper (Cu) and tantalum (Ta). These composites were produced with nominal Ta volume percentages ranging from 25% to 75%. Additional composites of the same nominal Ta content were prepared with a minor amount of titanium (Ti) added to facilitate interphase bonding. Ti addition was found to markedly improve the strength and co-deformability of the composites, allowing reliable extrusion of Cu-Ta composites with novel microstructures. A major influence of the Ti appears to be to soften the Ta, which contributes to improved co-deformability by reducing the flow stress mismatch between the composite constituents. Here, a change in the fracture surface morphology in the Ti-modified composite compared to the unmodified composite suggests that the Ti may also improve cohesion between Cu and Ta by reducing Ta surface oxides.
Sigma phase evolution and nucleation mechanisms revealed by atom probe tomography in a 347H stainless steel
The size evolution and phase composition of sigma phases were investigated for a 347H stainless steel subject to isothermal aging at 750 °C for up to 10,000 h. Scanning electron microscopy reveals that sigma phases are present before 336 h aging and they continue to grow for all aging times studied. Atom probe tomography shows little variation in the sigma phase composition with aging time up to 10,000 h, and only the C content decreases with aging time. The comparison of C concentration suggests that the sigma phase does not nucleate within the C-depleted matrix or precipitate free grain boundaries, leaving dissolving metastable M 23 C 6 as the only possible nucleation site. Based on the experimental results and thermodynamic simulations, the desirable Nb concentration is discussed to reduce the kinetics of sigma phase growth, and possible design directions are suggested to improve 347H.
Challenges in computationally designing high temperature Fe-based austenitic alloys: Addressing the role of Ni additions
Alumina-forming austenitic (AFA) alloys are relatively inexpensive high performance materials which combine the creep resistance of low-cost austenitic alloys and the oxidation resistance of expensive alumina forming alloys. However, a fundamental understanding of the role of key alloying elements such as Ni, Cr, Al, Nb, Ti, V, B and C in the experimentally observed oxidation behavior of these alloys is still lacking. The present work is a first in a series of studies aiming to quantitatively describe the role of Ni in promoting or disrupting protective Al 2 O 3 scale formation on AFA alloys. Here, ternary Fe-Al-xNi model alloys with three different Ni contents were isothermally exposed in an atmosphere with a low partial pressure of oxygen between 800–1000 °C for 24 h to evaluate the role of Ni in the observed internal oxidation behavior. Increasing Ni contents had no impact on the internal oxidation behavior of the alloys. The experimental and theoretical analyses in the present work suggested a negligible effect of the internal oxide precipitates on the inward diffusion of oxygen, typically expected in these systems, while simultaneously highlighting the barriers in the development of reliable models for computation-assisted design of these alloys.
Ultra-efficient polymer binder for silicon anode in high-capacity lithium-ion batteries
As a highly promising anode material for high-capacity lithium-ion batteries (LIBs), the low electronic conductivity and large volume variation of silicon (Si) make the slurry-coating Si based electrode requiring high content of “inert” materials and suffering rapid capacity fading. In this work, a polyimine, synthesized via one-step condensation reaction, has been demonstrated as an ultra-efficient polymer binder that can resolve the above issues. The polyimine binder containing Si electrode delivers superior electrochemical performance: a delithiation specific capacity of 804.4 mAh g –1 with capacity retention of 82.4% after 1000 cycles at the current density of 2 A g –1 . The high efficiency of polyimine binder for Si electrode has also been demonstrated with ultrahigh weight ratio of “active” material to “inert” material (R A/I ). The electrode with 95 wt% of Si (95Si/Polyimine, R A/I = 19) reveals a reversible delithiation capacity of 2114 mAh g –1 (capacity retention ~ 80.4%) over 200 cycles at the current density of 400 mA g –1 . Even at the high current density of 2 A g –1 , a delithiation capacity of 1087.8 mAh g –1 after 500 cycles can be obtained. Molecular simulations and atomic force microscopy (AFM) indentation are utilized to investigate the ultra-efficiency of polyimine binder. With simple manufacturing process and ultra-efficient binder performance, the designed polyimine binder will be definitely meaningful in achieving low-cost and high-capacity LIBs with prolonged cycle life.
Rayleigh–Taylor instability with gravity reversal
Not Available
Measuring oxygen solubility in Ni grains and boundaries after oxidation using atom probe tomography
Not Available
Thermal stability of 3D interface Cu/Nb nanolaminates
Nanocrystalline alloys are promising structural materials yet lack thermal stability in many cases. Recent work shows that interface structure has an outsize effect on the thermal behavior of nanostructured alloys. Here, this work focuses on the role of controlled heterophase interface structure in the thermal evolution of model Cu/Nb nanolaminates. We introduce 3D interfaces containing nanoscale heterogeneities in all spatial dimensions between Cu and Nb, forming 3D Cu/Nb. TEM, nanoindentation, and DSC are used in tandem to establish thermal stability and to identify shifts in microstructure as a function of static annealing temperature. 3D interfaces are shown to survive annealing to 300 °C for 1 hr., while 3D Cu/Nb microstructure evolves to form low-density and voided regions correlating to the onset of layer pinch-off between 500 and 600 °C annealing temperatures. A diffusivity- and vacancy energetics-based mechanism is developed to explain void formation driven by 3D interface degradation at elevated temperature.
Trace explosives sampling for security applications (TESSA) study: Evaluation of procedures and methodology for contact sampling efficiency
We report the detection of trace amounts of explosive materials is critical to the security at mass transit centers (e.g., airports and railway stations). In a typical screening process, a trap is used to probe a surface of interest to collect and transfer particulate residue to a detector for analysis. The collection of residues from the surface being probed is widely viewed as the limiting step in this process. A multi-institutional study was performed to establish a methodology for the evaluation of sampling media collection efficiencies. Dry deposited residues of 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), C-4 (an RDX-based explosive), and pentaerythritol tetranitrate (PETN) were harvested from acrylonitrile butadiene styrene (ABS) plastic, ballistic nylon (NYL), and uncoated aluminum surfaces using muslin, Texwipe cotton, and stainless-steel mesh traps. Transfer and collection efficiencies of the sample media were calculated based on liquid chromatography-mass spectrometry analysis. Dry transfer efficiencies (DTE%) to all tested surfaces were greater than 75%, with transfer to ABS plastic being the lowest. Collection efficiency (CE%) varied significantly across the traps and the surfaces, yet some conclusions can be drawn; nylon had the lowest CE% for all cases (~10%), and the stainless steel mesh had the lowest CE% for the evaluated traps (~20%). Though the testing parameters have been standardized among the participants to establish a framework for an independent comparison of contact sampling media and surfaces, substantial variations in the DTE% and the CE% were observed, suggesting that other variables can affect contact sampling.
Autoclave grid-to-rod fretting wear evaluation of a candidate cladding coating for accident-tolerant fuel
In pressurized water reactors (PWRs), water flow induced vibrations cause contact and rubbing between the fuel rods and the supporting grid, a phenomenon known as Grid-to-Rod-Fretting (GTRF). GTRF may produce progressive wear damage on the fuel claddings leading to subsequent leakage of radioactive fission products. Various accident-tolerant fuel (ATF) concepts are being developed for higher resistance to the high temperature steam and one approach is to apply a cladding coating. Here, fretting wear behavior of a candidate Cr-coating was investigated using a unique bench-scale autoclave testing rig mimicking the environment in an industrial full-assembly PWR simulator. The contact was under a realistically low load (~0.5 N) lubricated by deionized water at a temperature of 204 °C under a pressure of 20-23 bars. Results demonstrated that the Cr-coating significantly improved the cladding's wear resistance when tested against a commercial ZIRLO grid with or without pre-oxidization. In addition, the Cr-coating also reduced wear on the non-oxidized ZIRLO grid but slightly increased the wear on the pre-oxidized grid.
Uncovering novel mutational signatures by de novo extraction with SigProfilerExtractor
Mutational signature analysis is commonly performed in cancer genomic studies. Here, we present SigProfilerExtractor, an automated tool for de novo extraction of mutational signatures, and benchmark it against another 13 bioinformatics tools by using 34 scenarios encompassing 2,500 simulated signatures found in 60,000 synthetic genomes and 20,000 synthetic exomes. For simulations with 5% noise, reflecting high-quality datasets, SigProfilerExtractor outperforms other approaches by elucidating between 20% and 50% more true-positive signatures while yielding 5-fold less false-positive signatures. Applying SigProfilerExtractor to 4,643 whole-genome- and 19,184 whole-exome-sequenced cancers reveals four novel signatures. Two of the signatures are confirmed in independent cohorts, and one of these signatures is associated with tobacco smoking. In summary, this report provides a reference tool for analysis of mutational signatures, a comprehensive benchmarking of bioinformatics tools for extracting signatures, and several novel mutational signatures, including one putatively attributed to direct tobacco smoking mutagenesis in bladder tissues.
In Situ Observations of Barium Sulfate Nucleation in Nanopores
In this work, the nucleation and growth of barium sulfate in nanoporous silica was investigated using in situ small-angle X-ray scattering and X-ray pair distribution function analysis, together with ex situ transmission and scanning transmission electron microscopy (TEM and STEM) imaging. We found that crystalline barite formation in micropores is likely preceded by a nonbulk barite phase in the nanopores, indicating a possible nonclassical nucleation pathway for barium sulfate under confinement. The nucleation of barium sulfate inside the nanopores stopped at ~12% of the pores filled and was seemingly limited by the formation of crystals near the exterior of the silica particles, which likely blocked subsequent solute transport into the interior of the nanopores. The growth rate of barium sulfate was fit using the Johnson–Mehl–Avrami–Kolmogorov equation and constrained using a growth rate of barite of ~1.0 × 10 –7 mol/m 2 /s, obtained from previous studies, but is consistent with TEM and STEM observations made here. The inferred nucleation rate of barium sulfate inside nanopores is estimated to be on the order of 1.0 × 10 9 nuclei/m 2 /s, which is 2 orders of magnitude higher than previous measurements on a planar silica substrate (~1.0 × 10 7 nuclei/m 2 /s). This implies that the ability of silica nanopores to promote barium sulfate nucleation is sufficiently high as to create a potentially self-limiting condition, where the nucleation reaction is shut down prematurely because rapid growth blocks reactant transport.