Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Behavior analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Electric conductivity analysis and dielectric relaxation behavior of the hybrid polyvanadate (H{sub 3}N(CH{sub 2}){sub 3}NH{sub 3})[V{sub 4}O{sub 10}]

Highlights: ► Plate-like crystals (H{sub 3}N(CH{sub 2}){sub 3}NH{sub 3})[V{sub 4}O{sub 10}] were synthesized. ► Frequency and temperature dependence of AC conductivity indicate CBH model. ► The temperature dependence of DC conductivity exhibits two conduction mechanisms. - Abstract: Layered hybrid compound (H{sub 3}N(CH{sub 2}){sub 3}NH{sub 3})[V{sub 4}O{sub 10}] has been synthesized via hydrothermal method. Techniques X-ray powder diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, and impedance spectroscopy have been used to characterize the hybrid material. Electrical and dielectric properties dependence on both temperature and frequency of the compound have been reported. The direct current conductivity process is thermally activated and it is found to be 12.67 × 10{sup −4} Ω{sup −1} m{sup −1} at 523 K. The spectra follow the Arrhenius law with two activation energy 0.25 eV for T < 455 K and 0.5 eV for T > 455 K.

36 MATERIALS SCIENCE↗

Analysis of the acoustoelectric behavior of microwave frequency, temperature-compensated AlN-based multilayer coupling configurations

Piezoelectric AlN films, 1.3-6.2 {mu}m thick, have been grown on bare and metallized Al{sub 2}O{sub 3}(0001) substrates by reactive radio-frequency-sputtering technique at 180 deg. C. The films were uniform, stress-free, highly c-axis oriented normal to the surface, and extremely adhesive to the substrates. Surface acoustic wave (SAW) delay lines, showing harmonic modes with operating frequencies up to about 2.44 GHz, were obtained just using conventional optical lithography at 7.5 {mu}m linewidth resolution. Four interdigital transducer (IDT)/counter electrode configurations were obtained locating the IDTs either on the AlN free surface or at the Al{sub 2}O{sub 3}/AlN interface, with and without an Al thin metal film opposite the IDTs. The temperature induced shift of the fundamental and harmonic operating frequencies of the four configurations was measured at different temperatures in the range from -25 to 70 deg. C. The first order temperature coefficient of delay (TCD) of the four structures was experimentally evaluated for different film thickness values and for SAWs propagating along and normal the Al{sub 2}O{sub 3} a-axis. Eight AlN thicknesses, i.e., the temperature-compensated points (TCPs), were experimentally estimated at which the TCD is equal to 0 ppm/deg. C. These TCPs were found to be in good agreement with those theoretically evaluated. The SAW propagation along the four coupling structures was investigated in terms of phase and group velocity, electromechanical coupling coefficient, electrical potential, and IDT capacitance and radiation resistance for different film thickness values and SAW propagation directions. The numerical simulation of the mechanical and electrical behaviors of the coupling structures showed how the electroacoustic transduction efficiency, the IDT directivity, and bandwidth can benefit from having different electrical boundary conditions. The obtained results confirm the AlN feasibility to the implementation of SAW devices for application to gigahertz range, good electromechanical coupling, thermally stable electroacoustic devices.

36 MATERIALS SCIENCE↗

Analysis of secondary particle behavior in multiaperture, multigrid accelerator for the ITER neutral beam injector

Heat load on acceleration grids by secondary particles such as electrons, neutrals, and positive ions, is a key issue for long pulse acceleration of negative ion beams. Complicated behaviors of the secondary particles in multiaperture, multigrid (MAMuG) accelerator have been analyzed using electrostatic accelerator Monte Carlo code. The analytical result is compared to experimental one obtained in a long pulse operation of a MeV accelerator, of which second acceleration grid (A2G) was removed for simplification of structure. The analytical results show that relatively high heat load on the third acceleration grid (A3G) since stripped electrons were deposited mainly on A3G. This heat load on the A3G can be suppressed by installing the A2G. Thus, capability of MAMuG accelerator is demonstrated for suppression of heat load due to secondary particles by the intermediate grids.

43 PARTICLE ACCELERATORS↗

Analysis of the nonlinear behavior of shear-Alfvén modes in tokamaks based on Hamiltonian mapping techniques

We present a series of numerical simulation experiments set up to illustrate the fundamental physics processes underlying the nonlinear dynamics of Alfvénic modes resonantly excited by energetic particles in tokamak plasmas and of the ensuing energetic particle transports. These phenomena are investigated by following the evolution of a test particle population in the electromagnetic fields computed in self-consistent MHD-particle simulation performed by the HMGC code. Hamiltonian mapping techniques are used to extract and illustrate several features of wave-particle dynamics. The universal structure of resonant particle phase space near an isolated resonance is recovered and analyzed, showing that bounded orbits and untrapped trajectories, divided by the instantaneous separatrix, form phase space zonal structures, whose characteristic non-adiabatic evolution time is the same as the nonlinear time of the underlying fluctuations. Bounded orbits correspond to a net outward resonant particle flux, which produces a flattening and/or gradient inversion of the fast ion density profile around the peak of the linear wave-particle resonance. The connection of this phenomenon to the mode saturation is analyzed with reference to two different cases: a Toroidal Alfvén eigenmode in a low shear magnetic equilibrium and a weakly unstable energetic particle mode for stronger magnetic shear. It is shown that, in the former case, saturation is reached because of radial decoupling (resonant particle redistribution matching the mode radial width) and is characterized by a weak dependence of the mode amplitude on the growth rate. In the latter case, saturation is due to resonance detuning (resonant particle redistribution matching the resonance width) with a stronger dependence of the mode amplitude on the growth rate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of thermal demagnetization behavior of Nd–Fe–B sintered magnets using magnetic domain observation

We used magnetic domain observation to statistically observe the thermal demagnetization behavior of Nd–Fe–B sintered magnets at elevated temperatures up to 150 °C. Simultaneous magnetization reversal in a hundred adjacent grains occurred at 90 °C because of the magnetic interaction among the grains beyond grain boundaries in the Dysprosium (Dy)-free low-coercivity magnet. Conversely, simultaneous magnetization reversal in a hundred grains did not occur in the Dy-added high-coercivity magnets, and the demagnetizing ratio steadily increased with temperature. Furthermore, the addition of Dy induced high thermal stability by eliminating the simultaneous thermal demagnetization, which was caused by the magnetic interaction among the grains.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Theoretical Analysis on the Dynamic Behavior and Electromechanical Response of PZT

Piezoelectric materials are used as a power source in stockpile components for safety and reliability assurances. The objective of this project is to gain insights into the fundamental pressure-induced behavior and electromechanical response of lead zirconate titanate (PZT). Specifically, to establish the basis for an accurate, physics-based material model for robust model-based design to rapidly optimize PZT-based materials and components for performance studies. Established ab-initio methods are used to interrogate and understand the dynamic behavior of PZT as a function of composition (50/50, 65/35, 80/20, 95/5) and dopants (La, Nb) to overcome the costly and time-consuming experimental methodologies. New cold curves for pure and doped single-crystal PZT are obtained as the reference equation-of-state (EOS). A negligible change in the pressure responses was observed for the systems and strains studied. Dielectric and piezoelectric responses of pure and doped single-crystal PZT were also calculated as a function of pressure. For undoped PZT, there is a clear and orderly pressure and composition dependence. For doped PZT, there is a significant increase in the responses, but the behavior is very disordered and inconclusive.

36 MATERIALS SCIENCE↗

Analysis of the Deformation Behavior of Mg-RE and Mg-Li Alloys using In-situ Energy-dispersive Synchrotron X-ray Diffraction

EPSC-Model is able to predict the complex deformation behavior of Mg-RE and Mg-Li alloys within a wide range of strains. Modification of the texture by RE-elements and the addition of Li increases the activity of slip systems at low strains - Reorientation due to twinning is stretch over a larger range of plastic deformation. Deformation at high strains is realized mainly by the basal and the <c+a>-pyramidal slip systems.

36 MATERIALS SCIENCE↗

Analysis of structure and deformation behavior of AISI 316L tensile specimens from the second operational target module at the Spallation Neutron Source

In an earlier publication, tensile testing was performed on specimens removed from the first two operational targets of the Spallation Neutron Source (SNS). There were several anomalous features in the results. First, some specimens had very large elongations (up to 57%) while others had significantly smaller values. Second, there was a larger than the usual amount of data scatter in the elongation results. Third, the stress-strain diagrams of nominally similar specimens spanned a wide range of behavior ranging from expected irradiation-induced hardening to varying levels of force drop after yield point and indirect signs of "traveling deformation wave" behavior associated with strain-induced martensite formation. To investigate the cause(s) of such variable tensile behavior, several specimens from Target 2, spanning the range of observed tensile behavior, were chosen for detailed microstructural examination using electron backscattering analysis (EBSD). It was also shown that the steel employed in the construction of the target contained an unexpected bimodal grain size distribution, containing very large out-of-specification grains surrounded by necklaces of grains of within-specification sizes. The large grains were frequently comparable to the width of the gauge section of the tensile specimen. Moreover, the propensity to form martensite during deformation was shown to be accelerated by radiation but also to be very sensitive to the relative orientation of the grains with respect to the tensile axis. Specimens having large grains in the gauge that were most favorably oriented for production of martensite strongly exhibited the traveling deformation wave phenomenon, while those specimens with less favorably oriented grains had lesser or no degree of the wave effect, thereby accounting for the larger than expected data scatter.

316L↗

A meta-analysis of the association between gender and protective behaviors in response to respiratory epidemics

Respiratory infectious disease epidemics and pandemics are recurring events that levy a high cost on individuals and society. The health-protective behavioral response of the public plays an important role in limiting respiratory infectious disease spread. Health-protective behaviors take several forms. Behaviors can be categorized as pharmaceutical (e.g., vaccination uptake, antiviral use) or non-pharmaceutical (e.g., hand washing, face mask use, avoidance of public transport). Due to the limitations of pharmaceutical interventions during respiratory epidemics and pandemics, public health campaigns aimed at limiting disease spread often emphasize both non-pharmaceutical and pharmaceutical behavioral interventions. Understanding the determinants of the public’s behavioral response is crucial for devising public health campaigns, providing information to parametrize mathematical models, and ultimately limiting disease spread. While other reviews have qualitatively analyzed the body of work on demographic determinants of health-protective behavior, this meta-analysis quantitatively combines the results from 85 publications to determine the global relationship between gender and health-protective behavioral response. The results show that women in the general population are about 50% more likely than men to adopt/practice non-pharmaceutical behaviors. Conversely, men in the general population are marginally (about 12%) more likely than women to adopt/practice pharmaceutical behaviors. It is possible that factors other than pharmaceutical/non-pharmaceutical status not included in this analysis act as moderators of this relationship. We find these results suggest an inherent difference in how men and women respond to epidemic and pandemic respiratory infectious diseases. In conclusion, this information can be used to target specific groups when developing non-pharmaceutical public health campaigns and to parameterize epidemic models incorporating demographic information.

60 APPLIED LIFE SCIENCES↗

Rank-ordered multifractal analysis for intermittent fluctuations with global crossover behavior

The rank-ordered multifractal analysis (ROMA), a recently developed technique that combines the ideas of parametric rank ordering and one-parameter scaling of monofractals, has the capabilities of deciphering the multifractal characteristics of intermittent fluctuations. The method allows one to understand the multifractal properties through rank-ordered scaling or nonscaling parametric variables. The idea of the ROMA technique is applied to analyze the multifractal characteristics of the auroral zone electric-field fluctuations observed by the SIERRA sounding rocket. The observed fluctuations span across contiguous multiple regimes of scales with different multifractal characteristics. We extend the ROMA technique such that it can take into account the crossover behavior - with the possibility of collapsing probability distribution functions - over these contiguous regimes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Behavioral Changes for Energy Efficiency: An Exploratory Analysis of the CanBikeCO Mini-Pilot

Behavioral Changes for Energy Efficiency: an exploratory analysis of the CanBikeCO mini-pilot While the results are strongly positive, the small sample size, narrow demographic profile, and limited mobility alternatives for program participants indicate caution in broader interpretation. However, they do provide the tantalizing possibility that such programs can meet equity and sustainability goals simultaneously.

ADVANCED PROPULSION SYSTEMS↗