Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BUSHINGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Nonlinear transient analysis of multi-mass flexible rotors - theory and applications

The equations of motion necessary to compute the transient response of multi-mass flexible rotors are formulated to include unbalance, rotor acceleration, and flexible damped nonlinear bearing stations. A method of calculating the unbalance response of flexible rotors from a modified Myklestad-Prohl technique is discussed in connection with the method of solution for the transient response. Several special cases of simplified rotor-bearing systems are presented and analyzed for steady-state response, stability, and transient behavior. These simplified rotor models produce extensive design information necessary to insure stable performance to elastic mounted rotor-bearing systems under varying levels and forms of excitation. The nonlinear journal bearing force expressions derived from the short bearing approximation are utilized in the study of the stability and transient response of the floating bush squeeze damper support system. Both rigid and flexible rotor models are studied, and results indicate that the stability of flexible rotors supported by journal bearings can be greatly improved by the use of squeeze damper supports. Results from linearized stability studies of flexible rotors indicate that a tuned support system can greatly improve the performance of the units from the standpoint of unbalanced response and impact loading. Extensive stability and design charts may be readily produced for given rotor specifications by the computer codes presented in this analysis.

Kirk, R. G.↗

To assess the value of satellite photographs in resource evaluation on a national scale

The author has identified the following significant results. The limit of resolution on ERTS imagery is normally acknowledged to be about 60 miles although very long features such as roads and railways which are often less than 10 miles long are easily detectable. An example is the north-south road and railway from Lobatse to Francistown. Vegetation growth from winter to summer is readily monitored on false color imagery. The limits of government ranches and special farming areas can be quite accurately ascertained from ERTS imagery. Another aspect to which ERTS imagery lends itself is the location and demarcation of bush fires, many of which were seen on the first imagery which was acquired at the end of the cold, dry season. As a whole, MSS 7 offers maximum reflectance contrast among black and white imagery and is the wavelength used most for interpretation.

Hepworth, J. V.↗

Ecological effects and environmental fate of solid rocket exhaust

Specific target processes were classified as to the chemical, chemical-physical, and biological reactions and toxic effects of solid rocket emissions within selected ecosystems at Kennedy Space Center. Exposure of Citris seedlings, English peas, and bush beans to SRM exhaust under laboratory conditions demonstrated reduced growth rates, but at very high concentrations. Field studies of natural plant populations in three diverse ecosystems failed to reveal any structural damage at the concentration levels tested. Background information on elemental composition of selected woody plants from two terrestrial ecosystems is reported. LD sub 50 for a native mouse (peromysous gossypinus) exposed to SRM exhaust was determined to be 50 ppm/g body weight. Results strongly indicate that other components of the SRM exhaust act synergically to enhance the toxic effects of HCl gas when inhaled. A brief summary is given regarding the work on SRM exhaust and its possible impact on hatchability of incubating bird eggs.

Nimmo, B.↗

Performance of graphite fiber-reinforced polyimide composites in self-aligning plain bearings to 315 C

A 50/50 (weight percent) composite of graphite fibers and polyimide was studied in self-aligning plain bearings oscillating + or - 15 degrees at 1 hz. The friction coefficient was 0.15 + or - 0.05 at 250 C, and 0.05 + or - 0.02 at 315 C. Best results were obtained with a molded composite liner with chopped graphite fibers randomly oriented in the composite. The specific wear rate is given. It was found that the dynamic unit load capacity was higher for a composite bushing (thin liner), than for a composite ball.

Sliney, H. E.↗

Flush-mounting technique for composite beams

Procedure permits mounting of heavy parts to surface of composite beams without appreciably weakening beam web. Web is split and held apart in region where attachment is to be made by lightweight precast foam filler. Bolt hole penetrates foam rather than web, and is secured by barrelnut in transverse bushing through web.

Harman, T. C.↗

Practical experience with unstable compressors

Using analytical mathematical modeling techniques for the system components, an attempt is made to gauge the destabilizing effects in a number of compressor designs. In particular the overhung (or cantilevered) compressor designs and the straddle-mounted (or simply supported) compressor designs are examined. Recommendations are made, based on experiences with stable and unstable compressors, which can be used as guides in future designs. High and low pressure compressors which operate well above their fundamental rotor-bearing lateral natural frequencies can suffer from destructive subsynchronous vibration. Usually the elements in the system design which contribute to this vibration, other than the shafting and the bearings, are the seals (both gas labyrinth and oil breakdown bushings) and the aerodynamic components.

Malanoski, S. B.↗

Interaction of gravitic and mechanical stimuli in tropic and nastic responses in beans

Experiments designed to explore the interaction of gravity and mechanical stimuli in the tropic and nastic movements of Cherokee Bush bean plants were summarized. When 10-day-old plants were rubbed just prior to presentation of the gravitic stimulus (by placing them on their sides), they displayed much less geotropic curvature than did nonrubbed controls. Geotropism could also be inhibited by rubbing even after it had been progressing for two hours. Wind from a fan could also inhibit geotropism, suggesting that this phenomenon also occurs in nature.

Jaffe, M. J.↗

Reusable High-Pressure Connector

Fluid line connector for high pressure tests has split ferrule, nut, and O-ring seal. Following test, ferrule nut, and O-ring fitting are removed leaving line unaltered except for bushing braze to free end. Connector assures strong joint for high-pressure testing without redundant parts requiring postest debrazing.

Jensen, H. O. C.↗

Portable Roller Staking Tool

Staking tool compact and portable. Tool combines clamping and staking operations in single unit. Tool clamps workpiece (a bearing or bushing), alines it, and stakes on of flat faces. Used for most roller staking operations which acess both faces of workpiece.

Bird, R. G.↗

Testing Bearings in Tight Spaces

Portable tool checks bushings and bearings in hard-to-reach places to ensure they are properly staked. Actuator plate with surfaces at 45 degrees to hydraulic cylinder shaft turns push or pull perpendicular to original direction. Tool makes unnecessary to disassemble equipment to gain access to parts.

Bird, R. G.↗

Positioning Vise for Crystal Cleavage

Vise manipulates brittle crystals, such as lithium fluoride, so they are in proper position for cleaving. Vise allows crystals as thin as 2 millimeters or less positioned so that cleaved without breakage. Vise holds workpiece firmly but gently. Bushings, shafts and adjusting screw designed to move jaws smoothly and uniformly with great tactile sensitivity.

Hallberg, F. C.↗

The effects of seasonal differences in climatic conditions on Landsat spectral signatures and associated land cover classification

Unsupervised classification algorithms are used to analyze Landsat computer-compatible tape data for an area of approximately 840 sq km in central Oklahoma, over the period from June 12 to August 4, 1979. The results obtained show that changes in remotely sensed spectral signatures and land cover classes are associated with a period of transition from moisture availability in late spring to moisture deficit in midsummer, with the latter being marked by greater visible spectrum reflectance and greater near-IR absorption, although each surface cover type has responded differently to the seasonal change in water availability. Consideration of these results has led to the identification of important factors in the use of multidate satellite data in environmental change monitoring. Naturally induced trends in surface albedo introduce noise into studies aimed at identifying anthropogenic land cover change. Specific problems associated with prairie-forest ecotonal areas in the southern Great Plains involve the seasonally induced differences in separability of forest, bush, and grassland cover types.

Harrington, J. A., Jr.↗

Pinacate-gran Desierto Region, Mexico: SIR-A Data Analysis

Radar images (SIR-A) from the Columbia space shuttle were used to assess the radar returns of terrain shaped by volcanic, aeolian, and fluvial processes in northwest Sonora. Field studies and photointerpretation show that sand dunes are poorly imaged by SIR-A, in contrast to SEASAT, evidently a consequence of the greater SIR-A incidence angle; star dunes are visible only as small bright spots representing merging arms at dune apices which may act as corner reflectors. Desert grasses and bushes (approx. 2 m high) have little effect on radar brightness. Only larger trees with woody trunks approx. 0.5 m across are effective radar reflectors; their presence contributes to radar bright zones along some arroyos. The radar brightness of lava flows decreases with surface roughness and presence of mantling windblown sediments and weathering products; however, old uplifted (faulted) flows are of equal brightness to fresh, unmantled aa flows. Maar craters display circular patterns of varying radar brightness which represent a combination of geometry, slope, and distribution of surface materials. Some radar bright rings in the Pinacates resemble craters on radar but are observed to be playas encircled by trees.

Christensen, P.↗

Vegetation analysis for arid lands geobotany

Three primary study sites were selected for measurement of plant phenological properties and spectral analysis. The sites selected represented typical sagebrush, creosote bush, and saltbush communities in Owens Valley, CA. Community composition was studied at these three sites plus five burned sites. Ten 50 m transects at each locality were measured for percent cover (over 10 cm) by a given species. On each transect two point quarter and five nearest neighbor analyses were conducted. These data provided percent cover, cover by area, plant size, tendency for association, and recolonization patterns after a disturbance. Plots representing percentage plant cover for six sites are included.

Barbour, M. G.↗

Damping seal verification setup

The heart of the Space Shuttle Main Engine (SSME) is a set of turbopumps that propel cryogenic fluids at very high pressures and flow rates, at rotor speeds up to 37,000 rpm. Bushing seals that cause the flow in the fluid film to become turbulent, by means of a multiplicity of pockets, were shown theoretically not only to inhibit subsynchronous whirl, but to reduce leakage as well. However, experimental data that relate these two desirable characteristics to such parameters as pocket depth, Reynolds number (based on clearance and axial flow rate), and rotating speed are limited. To obtain the required data, NASA's Marshall Space Flight Center (MSFC) commissioned Wyle Laboratories to design, build and operate a test rig in which the damping efficacy and leakage reduction of typical candidate seals are to be evaluated.

Cappel, K. L.↗

Jig for Removing Rivets

Drill-press jig used to remove improperly installed rivets. Drillpress jig makes possible to drill accurately-centered, straight holes through rivets. Key component of jig is a drill bushing with spherical recess machined into base. Contour of recess matches contour of rivet head. Operator holds jig handle with one hand and controls drill with other. Handle and screw head hold drill bit in place over center of rivet so rivet drilled out through its axis. With rivet removed, parts separated and refastened or reused elsewhere.

Roebuck, T. P.↗

Improved Orifice Plate for Spray Gun

Erratic spray pattern of commercial spray gun changed to repeatable one by simple redesign of two parts. In modified spray gun orifice plate and polytetrafluoroethylene bushing redesigned to assure centering and alignment with nozzle. Such improvement useful in many industrial applications requiring repeatable spray patterns. Might include spraying of foam insulation, paint, other protective coatings, detergents, abrasives, adhesives, process chemicals, or fuels. Unmodified spray gun produces erratic spray because lateral misalignment between orifice plate and nozzle.

Cunningham, W.↗

Influence of design parameters on occurence of oil whirl

Oil whirl instability is a serious problem in oil lubricated journal bearings. The phenomenon is characterized by a subsynchronous vibration of the journal within the bush and is particularly apparent in turbogenerators, aeroengines and electric motors. A review is presented of previous papers on the subject of oil whirl, and a simple theory is described which was used to aid the design of an oil whirl test rig. Predictions of the onset of oil whirl made by the theory presented were found to agree with those of previous researchers. They showed that increasing the shaft flexibility, or the lubricant viscosity, and decreasing the bearing radial clearance tended to reduce the oil whirl onset speed thus making the system more unstable.

Ogrodnik, P. J.↗