Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Advanced Diagnostics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

Overview of results from the MST reversed field pinch experiment

An overview of recent results from the MST reversed field pinch programme is presented here. With neutral beam injection, bursty energetic particle (EP) modes are observed. The profiles of the magnetic and density fluctuations associated with these EP modes are measured using a far infrared interferometer–polarimeter. Equilibrium reconstructions of the quasi-single-helicity 3D helical state are provided by the V3FIT code that now incorporates several of MST's advanced diagnostics. The orientation of the helical structure is controlled using a new resonant magnetic perturbation technique. Gyrokinetic simulations based on experimental equilibria predict unstable trapped-electron modes (TEMs), and small-scale density fluctuations are detected in improved-confinement plasmas with TEM-like features. Upgraded pellet injection permits study of density and beta limits over MST's full range of operation, and an MST-record line-average density of 0.9 × 1020 m3 (n/nG = 1.4) has been obtained. Impurity ion temperature measurements reveal a charge-to-mass-ratio dependence in the rapid heating that occurs during a sawtooth crash. Runaway of NBI-born fast ions during the impulsive sawtooth event agrees with test-particle theory. Magnetic self-organization studies include measurements of the dynamo emf with an applied ac inductive electric field using oscillating field current drive.

beta limit↗

Runaway electron-induced plasma facing component damagein tokamaks

This Roadmap article addresses the critical and multifaceted challenge of plasma facing component (PFC) damage caused by runaway electrons (REs) in tokamaks, a phenomenon that poses a significant threat to the viability and longevity of future fusion reactors such as ITER and DEMO. The dramatically increased RE production expected in future high-current tokamaks makes it very difficult to avoid or mitigate REs in such devices when a plasma discharge terminates abnormally. Preventing damage from the intense localised heat loads they can cause requires a holistic approach that considers plasma, REs and PFC damage. Despite decades of progress in understanding the physics of REs and the thermomechanical response of PFCs separately, their complex interplay remains poorly understood. This document aims to initiate a coordinated, interdisciplinary approach to bridge this gap by reviewing experimental evidence, advancing diagnostic capabilities, and improving modelling tools across different scales, dimensionalities, and fidelities. Key topics include RE beam formation and transport, damage mechanisms in both brittle and metallic PFCs, and observed effects in major facilities such as JET, DIII-D, WEST and EAST. The Roadmap emphasises the urgency of predictive, high-fidelity modelling validated against well-diagnosed controlled experiments, particularly in the light of recent changes in ITER’s wall material strategy and the growing importance of private sector fusion initiatives. Each section of the Roadmap article is written to provide a concise overview of one area of this multidisciplinary subject, with an assessment of the status, a look at current and future challenges, and a brief summary. The ultimate goal of this initiative is to guide future mitigation strategies and design resilient components that can withstand the intense localised loads imposed by REs, thus ensuring the safe and sustainable operation of the next generation of fusion power plants.

Ratynskaia, Svetlana [KTH Royal Inst. of Technolog↗

Stability evaluation and mitigation strategies in advanced tokamaks using 3D MHD spectroscopy

Multi-modal, active 3D MHD spectroscopy is applied in high-performance advanced tokamak scenarios to study their stability time evolution, revealing an intriguing dependence on both and . A tailored applied 3D field provides a 3D plasma response to extract the growth rate of the least stable mode. The estimated growth rate finds a decrease in stability when the minimum in the safety factor (q) passes through 2.0 and reveals inherent risks of crossing an additional rational surface at integer q min , even above the usual q = 1 sawtooth condition. Based on this result, the potential scenario in which q min ~ 2 can be safely crossed during a more stable lower β N phase was investigated, and the improved stability of this scenario is confirmed by the estimated growth rate. This shows that 3D MHD spectroscopy can offer insights into strategies for improving stability by identifying the vulnerable aspects of such scenarios. In addition, the method highlights its potential for instability avoidance by enabling early detection of multiple modes, even before magnetic coils can measure them. The measured growth rate by the 3D MHD spectroscopy shows its reliability by exhibiting a correlation with the programmed rises in plasma beta across various high β N and high q min discharges. In addition, this method is successfully applied during rapidly evolving I p ramp-up phases, a key part of the scenario development. By achieving reasonable growth rate measurements at high-performance scenario developments, this technique contributes to the development of advanced diagnostic tools for tokamak scenario stability, which will help identify an effective pathway to stable, high-performance scenarios.

Yang, S. M. [Princeton Plasma Physics Laboratory (↗

Enclosed Sydney Swirl Burner Experimental Data Set - Release 1.0

This submission includes a comprehensive data set for the NETL Enclosed Sydney Swirl Burner, generated between 2012 and 2014. The data set includes global parametric data and advanced diagnostic data for (3) flames of interest to CFD model validation. The submission includes a companion summary document describing the data and associated references.

Diagnostics↗

Summaries of FY16 LANL experimental campaigns at the OMEGA and EP Laser Facilities

In FY16, Los Alamos National Laboratory carried out 22 shot days on the OMEGA and OMEGA- EP laser facilities in the areas of High Energy Density (HED) Science and Inertial Confinement Fusion (ICF). In HED our focus areas were on radiation flow, hydrodynamic turbulent mix and burn, warm dense matter equations of state, and coupled Kelvin-­Helmholtz (KH)/Richtmyer-­ Meshkov (RM) instability growth. For ICF our campaigns focused on the Priority Research Directions (PRD) of implosion phase mix and stagnation and burn, specifically as they pertain to Laser Direct Drive (LDD). We also had several focused shot days on transport properties in the kinetic regime. We continue to develop advanced diagnostics such as Neutron Imaging, Gamma Reaction History, and Gas Cherenkov Detectors. Below are a summary of our campaigns, their motivation, and main results from this year.

42 ENGINEERING↗

Experimentally Enhanced Computation (ExEC): Traditional Calibration of Anisotropic Yield Functions

This memo addresses the calibration of anisotropic yield functions based on data obtained from a series of uniaxial tension specimens extracted from a tubular Al 7079 circular cylindrical extrusion. Achieving the calibrations completed an important step in the Experimentally Enhanced Computations (ExEC) project. The focus of the project is on novel calibration approaches that will be based on advanced diagnostics and numerical simulations with the intention of reducing the overall calibration effort. The test data used here resulted from traditional tensile tests on specimens cut at 12 orientations within the extrusion. Two anisotropic yield surfaces — Hill’s (1948) and Barlat’s (2005) — were calibrated based on the test data. The methods used to conduct the calibrations are described, and the results show that the material exhibited significant yield anisotropy. The larger number of parameters in Barlat’s yield function allowed it to fit the test data more accurately than Hill’s. Although work remains to assess the sensitivity of the calibrated model parameters to various factors, the methods implemented and the results obtained here provide bases for further work and useful benchmarks for future calibrations to be conducted using the novel approach.

36 MATERIALS SCIENCE↗

New Approaches to Automotive Combustion Systems and Control of NOx Emissions Final Report CRADA No. TC-0399-92B

DOE Proposal 93-MULT-162-Cl funded a Program consisting of two distinct but related projects which focused upon increasing fuel economy and lowering emissions which were two of the goals of the New Generation Vehiicle Program. Project A addressed combustion modeling and experimental verification of the models for spark-ignited and compression-ignited engines. Project B applied advanced diagnostics to a production engine and its associated emission components.

42 ENGINEERING↗

Understanding Water and Thermal Management in Polymer-Electrolyte Fuel Cells

The Parties developed understanding of water and thermal management in fuel cells using a detailed 1-D model for the through-plane direction, a gas-channel relation model for the flow-channel direction, and a method to account for the rib/channel direction. The model simulates and predicts the water transport phenomena occurring within the fuel-cell sandwich, including the complex interplay among the various phases. This model enables optimum designs, operating conditions, and material properties for use in commercial PEFCs for automotive applications. In addition, novel advanced diagnostic methods and submodels were developed to determine the critical properties and model parameters and explore specific phenomena (e.g., ionomer thin films).

30 DIRECT ENERGY CONVERSION↗

Conversion of Plastic Work to Heat: A full-field study of thermomechanical coupling

This project targeted a full-field understanding of the conversion of plastic work into heat using advanced diagnostics (digital image correlation, DIC, combined with infrared, IR, imaging). This understanding will act as a catalyst for reformulating the prevalent simplistic model, which will ultimately transform Sandia's ability to design for and predict thermomechanical behavior, impacting national security applications including nuclear weapon assessments of accident scenarios. Tensile 304L stainless steel dogbones are pulled in tension at quasi-static rates until failure and full-field deformation and temperature data are captured, while accounting for thermal losses. The IR temperature fields are mapped onto the DIC coordinate system (Lagrangian formulation). The resultant fields are used to calculate the Taylor-Quinney coefficient, β, at two strain rates rates (0.002 s -1 and 0.08 s -1 ) and two temperatures (room temperature, RT, and 250°C).

36 MATERIALS SCIENCE↗

Summaries of FY 2018 LANL experimental campaigns at the OMEGA and OMEGA-EP Laser Facilities

In FY 2018, Los Alamos National Laboratory carried out 21 shot days on the OMEGA and OMEGA-EP laser facilities in the areas of High Energy Density (HED) Science and Inertial Confinement Fusion (ICF). Our focus areas were on radiation flow, hydrodynamic turbulent mix and burn, and coupled Kelvin-Helmholtz (KH)/Richtmyer-Meshkov (RM) instability growth including in convergent geometry. We also had several focused shot days on transport properties in the kinetic regime. We continue to develop advanced diagnostics such as Neutron Imaging , and performed tests of a new imaging concept to be installed on NIF. We executed experiments in support of our double-shell campaign, and we began initial experiments using the new Revolver platform. Below is a summary of our campaigns, their motivation, and main results from this year.

47 OTHER INSTRUMENTATION↗

Large-scale Meteorological Organization of Extreme Weather Events: Final Technical Report

Although the occurrence of regional extreme weather events (EWEs) such as cold air outbreaks, heat waves, droughts and floods are known to be related to planetary climate modes (PCMs) such as the El-Nino Southern Oscillation or North Atlantic Oscillation, intermediate meteorological patterns (IMPs) such as jet stream blocking, cyclones, and high pressure systems are required to connect PCMs to EWEs. Our project has revealed a physical pathway for the interplay among EWEs, IMPs and PCMs. Under support of this award, we have characterized the behavior of IMPs that cause winter cold air outbreaks, extreme floods and warm season dry spells in the US. This includes formulating meteorological “fingerprints” for easily identifying IMPs. The research performed includes a parallel analysis of how well modern climate models are able to simulate IMP behavior. We have also developed a novel approach for characterizing PCM structures and identifying EWE-LMP-PCM linkages. We discovered that dry spells occurring during spring and summer over the US are affected by changes in the North Pacific Ocean temperature. We further revealed the physical origin of a critical jet stream pattern occurring over the North Pacific Ocean that provides a “bridge” between the water cycles of East Asia and North America, respectively. We developed an advanced diagnostic technique (called piecewise tendency diagnosis or PTD) to understand the physical causes for the IMP formation and EWE-LMP-PCM linkages.

54 ENVIRONMENTAL SCIENCES↗

Enhancing Fundamental Understanding of Magnetic Confinement in the Presence of Flows, Non-Conservative Forces, Dynamics, Collisions, Relaxation and Kinetic Effects

Pulsed high-power technology is used to create MHD-governed, dynamically-evolving, plasma-filled magnetic flux tubes. Advanced diagnostics measure the dynamical evolution and the measurements are then related to theoretical models. The dynamics are relevant to solar coronal plasma loops, astrophysical jets, and other situations where magnetic field lines intercept a boundary and current flows from the boundary into the plasma along the field lines. The morphology is time-dependent and determined by complex physics involving magnetic forces, hydrodynamic forces, and boundary conditions. Unlike magnetic fusion plasma experiments which are in approximate MHD equilibrium, fast accelerated plasma flows are a dominant feature. Typical parameters are: electric current 50-150 kA, applied voltage 3-6 kV, magnetic field 0.3 to 3 kG, experiment duration 10 μs, jet velocity 10’s of km/s, flux tube dimensions a few cm in radius and 10’s of cm in length. A scheme for measuring the wavelength of a quasi-neutral magnetic plasma wave using a single point of measurement was demonstrated both by an actual spacecraft (MMS) and in the lab. The experimental work is supported by a strong theoretical component. Theoretical activities included proposing a model for driving astrophysical jets (model motivated by lab experiments), and providing new insights into fast collisionless magnetic reconnection by demonstration of a new, more fundamental parameter than previously used.

47 OTHER INSTRUMENTATION↗

Development of Mockups and Instrumentation for Spent Fuel Drying Tests

The purpose of this report is to provide updates on the experimental components, methodology, and instrumentation under development for use in advanced studies of realistic drying operations conducted on surrogate spent nuclear fuel. Validation of the extent of water removal in a dry spent nuclear fuel storage system based on drying procedures used at nuclear power plants is needed to close existing technical gaps. Operational conditions leading to incomplete drying may have potential impacts on the fuel, cladding, and other components in the system. Water remaining in canisters upon completion of drying procedures can lead to cladding corrosion, embrittlement, and breaching, as well as fuel degradation. Additional information is needed on the drying process efficacy to help evaluate the potential impacts of water retention on extended longterm dry storage. A general lack of data suitable for model validation of commercial nuclear canister drying processes necessitates additional, well-designed investigations. Smaller-scale tests that incorporate relevant physics and well-controlled boundary conditions are essential to provide insight and guidance to the simulation of prototypic systems undergoing drying processes. This report describes the implementation of moisture monitoring equipment on a pressurized, submersible system employing a single waterproof, electrically heated spent fuel rod simulator as a demonstration of analytical capabilities during a drying process. A mass spectrometer with specially designed inlets was used to monitor moisture and other gases at 150 kPa to 800 kPa for a test simulating a forced helium dehydration procedure and below 1 torr for tests mimicking a vacuum drying process. The dew point data from the mass spectrometer was found to be in good agreement with a solid-state moisture probe. A distinct advantage of the mass spectrometer system was the capability to directly sample from the hightemperature (>200 °C) head space expected in a prototypic scale experiment where a solid-state moisture probe would suffer considerable loss of accuracy or fail altogether. The operational and analytical experiences gained from this test series are poised to support an expansion to assembly-scale tests at prototypic length. These assemblies are designed to feature prototypic assembly hardware, advanced diagnostics for in situ internal rod pressure monitoring, and failed fuel rod simulators with engineered cladding defects to challenge the drying system with waterlogged fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Mshock HED Council Request FY24 [Slides]

ICF and HEDP experiments experience complicated loadings including successive shocks, but modeling and analytic work has mostly engaged the simpler shock or shock-reshock case. This is because the co propagating case is difficult to achieve with conventional (non-HED) drivers. Successive shocks will be challenging to model in BHR or modal model interpretations: 1) Ex: Consider the case where long wavelength modes re-invert coherently, but short wavelength nonlinear modes are spun up turbulently. 2) Necessitates more advanced diagnostics and analysis than simple “mixing layers.” High resolution spectral information (concomitant with Ω-EP campaigns) and higher-order moment analyses will be necessary to stress and validate the reduced BHR-type models.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

AMPPED LDRD: Advanced Models of the Physics & Phenomena of Electrical Discharge.

This Laboratory Directed Research and Development (LDRD) project aimed at addressing an unmet need for physics-based models that enable prediction of electrical breakdown in the presence of high voltage gradients and real-world environments. This project focused on understanding coupled plasma-surface feedback phenomena critical to electrical discharge processes and design of breakdown voltages, breakdown times, and breakdown paths. New secondary electron emission and coupled plasma-surface measurement methods and models were developed. Highly reproducible discharge experiments were developed to provide current-voltage data as a function of time, and methods were developed to condition electrodes for predictable discharge. To assess plasma-surface feedback mechanisms, new surface physics capabilities, including measurement systems for local and global photoemission yield and ion-induced secondary electron emission yield were developed. Discharge models were developed to incorporate these yields for predicting discharge behavior to understand influence of surface physics on discharge current and time evolution, and methods to accelerate these simulations were demonstrated. A key finding was that the initiation process of a non-vacuum discharge appears highly dependent on photoemission at the cathode. Advanced diagnostics were developed, including spatial electrical field imaging, spectroscopy of plasmas, and high-speed imaging of discharge event s in metal and dielectric environments. These diagnostics and improved electrical models are a step toward enabling quantitative design margins, assurance of safety architectures, and implementation of novel materials and technologies for wide ranging energy and electronics applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MRT 7365: Power flow physics and key physics phenomena

The Z accelerator at Sandia National Laboratories conducts z-pinch experiments at 26 MA in support of DOE missions in stockpile stewardship, dynamic materials, fusion, and other basic sciences. Increasing the current delivered to the z-pinch would extend our reach in each of these disciplines. To achieve increases in current and accelerator efficiency, a fraction of Z’s shots are set aside for research into transmission-line power flow. These shots, with supporting simulations and theory, are incorporated into this Advanced Diagnostics milestone report. The efficiency of Z is reduced as some portion of the total current is shunted across the transmission-line gaps prior to the load. This is referred to as “current loss”. Electrode plasmas have long been implicated in this process, so the bulk of dedicated power-flow experiments are designed to measure the plasma environment. The experimental analyses are enhanced by simulations conducted using realistic hardware and Z voltage pulses. In the same way that diagnostics are continually being improved for sensitivity and resolution, the modeling capability is continually being improved to provide faster and more realistic simulations. The specifics of the experimental hardware, diagnostics, simulations, and algorithm developments are provided in this report. The combined analysis of simulation and data confirms that electrode plasmas have the most detrimental impact on current delivery. Experiments over the last three years have tested the theoretical current-loss mechanisms of enhanced ion current, plasma gap closure, and Hall-related current. These mechanisms are not mutually exclusive and may be coincident in the final feed as well as in upstream transmission lines. The final-feed geometries tested here, however, observe lower-density plasmas without dominant ion currents which is consistent with a Hall-related current. The picture of plasma formation and transport formed from experiment and simulation is informing hardware designs being fielded on Z now and being proposed for the Next-Generation Pulsed Power (NGPP) facility. In this picture, the strong magnetic fields that heat the electrodes above particle emission thresholds also confine the charged particles near the surface. Some portion of the plasmas thus formed is transported into the transmission-line gap under the force of the electric field, with aid from plasma instabilities. The gap plasmas are then transported towards the load by a cross-field drift, where they accumulate and contribute to a likely Hall-related cross-gap current. The achievements in experimental execution, model validation, and physical analysis presented in this report set the stage for continued progress in power flow and load diagnostics on Z. The planned shot schedule for Z and Mykonos will provide data for extrapolation to higher current to ensure the predicted performance and efficiency of a NGPP facility.

43 PARTICLE ACCELERATORS↗

Jupiter Laser Facility Annual Report, FY 2025

Dear JLF community, I cannot believe I am now entering my third year as JLF director — time definitely flies when you are having fun! FY25 was another pivotal year for the Jupiter Laser Facility, marked by both scientific achievement and growing visibility for our community. Building on the successful reopening and refurbishment of the facility, we continued to demonstrate how JLF drives innovation in high energy density and fusion energy science, laser technology, and workforce development. Across Janus, Titan, and COMET, users executed a diverse portfolio of experiments, from dynamic compression and opacity measurements to laser plasma interactions, laboratory astrophysics, and advanced diagnostics. These efforts are highlighted in this report, including the development of new probes that capture the time evolution of plasmas on a single shot, and diagnostics and platforms that are already impacting experiments at NIF and other large facilities. JLF continues to serve as both a testbed for new ideas and a bridge to larger scale campaigns. FY25 also showcased the broader role of JLF within the Laboratory and the national HED science ecosystem. The NIF JLF User Groups Meeting in February brought nearly 180 participants to Livermore and highlighted the scientific progress made during JLF’s first full year of renewed operations. JLF research and users were recognized with Director’s Institutional Awards and Early and Mid Career awards, underscoring the quality and impact of the work performed here. Our team also contributed prominently to national conversations about laser safety, plasma physics, and inertial fusion energy through invited talks, conferences, and professional society leadership. JLF’s integration with LaserNetUS deepened this year as well. We launched a new technical exchange program across LaserNetUS facilities and kicked it off with a JLF team visit to the BELLA Center at Lawrence Berkeley National Laboratory. These exchanges are strengthening operations, sharing best practices, and improving the user experience across the network. Filming for the LaserNetUS “Behind the Scenes” series and participation in the annual LaserNetUS meeting further increased the visibility of our facility and our users. At the same time, JLF continues to play a central role in ambitious new programs, such as the Big Aperture Thulium laser effort funded through one of the DOE Office of Science Microelectronics Science Research Centers, which will use JLF infrastructure to explore next generation high rep rate lasers for EUV and x-ray source development. A core part of our mission remains training the next generation of scientists. In FY25, we welcomed another cohort of summer students, who joined experimental teams on Titan and presented their research at LLNL’s student poster symposium and national inertial fusion energy meetings. JLF users and early career scientists showcased their work at conferences across the country, highlighting experiments performed at the facility. These hands on experiences, and the mentoring provided by our staff and user teams, are central to JLF’s identity as a true user facility. Finally, FY25 reinforced JLF’s role as a focal point for partnerships and outreach. We hosted visits from international collaborators, science leaders, and we shared the story of the facility through venues such as the Big Ideas Lab podcast. These interactions help connect our work to a broader scientific and policy audience and open new pathways for collaboration. As we look ahead, the combination of refurbished hardware, new capabilities like STILETTO and enhanced short pulse performance on Titan, strong partnerships across LLNL and LaserNetUS, and a growing user community positions JLF for an even more ambitious program in the coming years. I am deeply grateful to our technical and operations staff for their dedication, to our LLNL partners for their continued support, and to our users for bringing bold, creative ideas to the facility. I look forward to more experiments, capabilities, partnerships, and groundbreaking science in the years to come! With brightest regards, Félicie Albert, JLF Director.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A comparison of European and American microgravity combustion experimental techniques

The European and the NASA microgravity combustion programs are complementary in many aspects. Differences appear in the technical approaches and cooperative efforts are beneficial. Droplet combustion gaseous fuel studies and the study of solid-fuel combustion are areas of common interest. It is recognized that the progress that can be made in low gravity combustion investigations, depends on advanced diagnostic tools, developed for normal gravity laboratories. The benefits of combustion experiments in reduced gravity, the ground-based low gravity facilities and the NASA microgravity combustion program are also considered.

Sacksteder, Kurt↗