Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARCH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Traversing Microphone Track Installed in NASA Lewis' Aero-Acoustic Propulsion Laboratory Dome

The Aero-Acoustic Propulsion Laboratory is an acoustically treated, 65-ft-tall dome located at the NASA Lewis Research Center. Inside this laboratory is the Nozzle Acoustic Test Rig (NATR), which is used in support of Advanced Subsonics Technology (AST) and High Speed Research (HSR) to test engine exhaust nozzles for thrust and acoustic performance under simulated takeoff conditions. Acoustic measurements had been gathered by a far-field array of microphones located along the dome wall and 10-ft above the floor. Recently, it became desirable to collect acoustic data for engine certifications (as specified by the Federal Aviation Administration (FAA)) that would simulate the noise of an aircraft taking off as heard from an offset ground location. Since nozzles for the High-Speed Civil Transport have straight sides that cause their noise signature to vary radially, an additional plane of acoustic measurement was required. Desired was an arched array of 24 microphones, equally spaced from the nozzle and each other, in a 25 off-vertical plane. The various research requirements made this a challenging task. The microphones needed to be aimed at the nozzle accurately and held firmly in place during testing, but it was also essential that they be easily and routinely lowered to the floor for calibration and servicing. Once serviced, the microphones would have to be returned to their previous location near the ceiling. In addition, there could be no structure could between the microphones and the nozzle, and any structure near the microphones would have to be designed to minimize noise reflections. After many concepts were considered, a single arched truss structure was selected that would be permanently affixed to the dome ceiling and to one end of the dome floor.

Bauman, Steven W.↗
NASA NTRS2006

Comparison of Spitzer/IRAC Galactic Center Mid-IR Survey Results with X-ray and Radio Emission Due to High-Energy Processes in the Central 100 Parsecs

We compare the results of a small region from our 3.6 - 8.0 micron Spitzer/IRAC imaging survey of 2 x 1.5 deg around the Galactic Center with x-ray and radio emission due to high energy processes. The region we studied covers 100 x 100 parsecs, and was chosen to include a rich collection of sources, including Sgr A* and the bright Sgr AWest infrared/radio source complex, the non-thermal radio filaments and the thermal: radio arches. In a 40 x 40 parsec subset of that region we also make a preliminary analysis of the correlation between approx.2300 x-ray sources identified by Muno et al. (2003) and 20,000 infrared sources from our survey. We also investigate the correlation between infrared and radio emission in the large-scale structures including the thermal radio arches and non-thermal radio filaments. We set constrictions on the synchrotron spectrum observed at radio and millimeter wavelengths extrapolated to 8 micons, and set limits on the midinfrared variability of Sgr A* during and after the coordinated multi-wavelength observing campaign in September 2004.

Gezari, D. Y.↗
NASA NTRS2006

Nonlinear Reduced Order Random Response Analysis of Structures with Shallow Curvature

The goal of this investigation is to further develop nonlinear modal numerical simulation methods for application to geometrically nonlinear response of structures with shallow curvature under random loadings. For reduced order analysis, the modal basis selection must be capable of reflecting the coupling in both the linear and nonlinear stiffness. For the symmetric shallow arch under consideration, four categories of modal basis functions are defined. Those having symmetric transverse displacements (ST modes) can be designated as transverse dominated (ST-T) modes and in-plane dominated (ST-I) modes. Those having anti-symmetric transverse displacements (AT modes) can similarly be designated as transverse dominated (AT-T) modes and in-plane dominated (AT-I) modes. The response of an aluminum arch under a uniformly distributed transverse random loading is investigated. Results from nonlinear modal simulations made using various modal bases are compared with those obtained from a numerical simulation in physical degrees-of-freedom. While inclusion of ST-T modes is important for all response regimes, it is found that the ST-I modes become increasingly important in the nonlinear response regime, and that AT-T and AT-I modes are critical in the autoparametric regime.

Przekop, Adam↗
NASA NTRS2008

CME-Producing Precursors to the 2006 December 13 X-Flare

We revisit one of the largest explosions observed during the Hinode era, the X4.3 class event of 2006 Dec 13. We gain insight into the main eruption through study of two sub-C-class precursor eruptions, occurring within 12 hours of and originating from the same (or nearby) neutral line as the X-flare. The precursors share some features in common with the main eruption, and their lower energy and consequent slower development renders interpretation of these features easier to decipher than in the rapidly explosive main eruption. In addition, because the weak precursors occurred in a magnetically strong region, magnetic connections indicated by soft X-ray loops are readily visible in these cases, while such connections can be much less apparent in weaker-region eruptions. Hinode/SOT magnetograms indicate that photospheric magnetic dynamic activity in the "magnetic core" is the likely ultimate source of the eruptions. All the eruptions, however, produce Coronal Mass Ejections (CMEs) that have wider spatial extent than the localized source region; this is a long-observed but puzzling phenomena, which can address directly here using the high-quality Hinode data. For the precursor eruptions, Hinode/XRT images show that the initial eruptions occur inside larger-scale magnetic structures that encompass the core. The exploding core field blows out this larger-scale structure, resulting in the CME having angular extent far exceeding that of the source-region core alone; this is the arch-arch-blowout scenario for CMEs of Moore & Sterling (2007). Similar processes occur in the main eruption, except that the much larger energy release in that eruption compared to the precursors results in much faster and larger-scale phenomena.

Sterling, Alphonse C.↗
NASA NTRS2004

Silicone-Rubber Microvalves Actuated by Paraffin

Microvalves containing silicone-rubber seals actuated by heating and cooling of paraffin have been proposed for development as integral components of microfluidic systems. In comparison with other microvalves actuated by various means (electrostatic, electromagnetic, piezoelectric, pneumatic, and others), the proposed valves (1) would contain simpler structures that could be fabricated at lower cost and (2) could be actuated by simpler (and thus less expensive) control systems. Each valve according to the proposal would include a flow channel bounded on one side by a flat surface and on the other side by a curved surface defined by an arched-cross-section, elastic seal made of silicone rubber [polydimethylsilane (PDMS)]. The seal would be sized and shaped so that the elasticity of the PDMS would hold the channel open except when the seal was pressed down onto the flat surface to close the channel. The principle of actuation would exploit the fact that upon melting or freezing, the volume of a typical paraffin increases or decreases, respectively, by about 15 percent. In a valve according to the proposal, the seal face opposite that of the channel would be in contact with a piston-like plug of paraffin. In the case of a valve designed to be normally open at ambient temperature, one would use a paraffin having a melting temperature above ambient. The seal would be pushed against the flat surface to close the channel by heating the paraffin above its melting temperature. In the case of a valve designed to be normally closed at ambient temperature, one would use a paraffin having a melting temperature below ambient. The seal would be allowed to spring away from the flat surface to open the channel by cooling the paraffin below its melting temperature. The availability of paraffins that have melting temperatures from 70 to +80 C should make it possible to develop a variety of normally closed and normally open valves. The figure depicts examples of prototype normally open and normally closed valves according to the proposal. In each valve, an arch cross section defining a channel having dimensions of the order of tens of micrometers would be formed in a silicone-rubber sheet about 40 m thick. The silicone rubber sheet would be hermetically sealed to a lower glass plate that would define the sealing surface and to an upper glass plate containing a well. The well would be filled with paraffin and capped with a rigid restraining layer of epoxy. In the normally open valve, the paraffin would have a melting temperature above ambient (e.g., 40 C) and the wall of the well would be coated with a layer of titanium that would serve as an electric heater. In the normally closed valve, the paraffin would have a melting temperature below ambient (e.g.-5 C). Instead of a heater in the well, the normally closed valve would include a thermoelectric cooler on top of the epoxy cap.

Svelha, Danielle↗
NASA NTRS2003

Pneumatically Actuated Miniature Peristaltic Vacuum Pumps

Pneumatically actuated miniature peristaltic vacuum pumps have been proposed for incorporation into advanced miniature versions of scientific instruments that depend on vacuum for proper operation. These pumps are expected to be capable of reaching vacuum-side pressures in the torr to millitorr range (from .133 down to .0.13 Pa). Vacuum pumps that operate in this range are often denoted roughing pumps. In comparison with previously available roughing pumps, these pumps are expected to be an order of magnitude less massive and less power-hungry. In addition, they would be extremely robust, and would operate with little or no maintenance and without need for oil or other lubricants. Portable mass spectrometers are typical examples of instruments that could incorporate the proposed pumps. In addition, the proposed pumps could be used as roughing pumps in general laboratory applications in which low pumping rates could be tolerated. The proposed pumps could be designed and fabricated in conventionally machined and micromachined versions. A typical micromachined version (see figure) would include a rigid glass, metal, or plastic substrate and two layers of silicone rubber. The bottom silicone layer would contain shallow pump channels covered by silicone arches that could be pushed down pneumatically to block the channels. The bottom silicone layer would be covered with a thin layer of material with very low gas permeability, and would be bonded to the substrate everywhere except in the channel areas. The top silicone layer would be attached to the bottom silicone layer and would contain pneumatic- actuation channels that would lie crosswise to the pump channels. This version is said to be micromachined because the two silicone layers containing the channels would be fabricated by casting silicone rubber on micromachined silicon molds. The pneumatic-actuation channels would be alternately connected to a compressed gas and (depending on pump design) either to atmospheric pressure or to a partial vacuum source. The design would be such that the higher pneumatic pressure would be sufficient to push the silicone arches down onto the substrates, blocking the channels. Thus, by connecting pneumatic- actuation channels to the two pneumatic sources in spatial and temporal alternation, waves of opening and closing, equivalent to peristalsis, could be made to move along the pump channels. A pump according to this concept could be manufactured inexpensively. Pneumatic sources (compressors and partial vacuum sources) similar those needed for actuation are commercially available; they typically have masses of .100 g and power demands of the order of several W. In a design-optimization effort, it should be possible to reduce masses and power demands below even these low levels and to integrate pneumatic sources along with the proposed pumps into miniature units with overall dimensions of no more than a few centimeters per side.

Feldman, Sabrina↗
NASA NTRS2016

An Integrated Extravehicular Activity Research Plan

Multiple organizations within NASA and outside of NASA fund and participate in research related to extravehicular activity (EVA). In October 2015, representatives of the EVA Office, the Crew and Thermal Systems Division (CTSD), and the Human Research Program (HRP) at NASA Johnson Space Center agreed on a formal framework to improve multi-year coordination and collaboration in EVA research. At the core of the framework is an Integrated EVA Research Plan and a process by which it will be annually reviewed and updated. The over-arching objective of the collaborative framework is to conduct multi-disciplinary cost-effective research that will enable humans to perform EVAs safely, effectively, comfortably, and efficiently, as needed to enable and enhance human space exploration missions. Research activities must be defined, prioritized, planned and executed to comprehensively address the right questions, avoid duplication, leverage other complementary activities where possible, and ultimately provide actionable evidence-based results in time to inform subsequent tests, developments and/or research activities. Representation of all appropriate stakeholders in the definition, prioritization, planning and execution of research activities is essential to accomplishing the over-arching objective. A formal review of the Integrated EVA Research Plan will be conducted annually. External peer review of all HRP EVA research activities including compilation and review of published literature in the EVA Evidence Book is already performed annually. Coordination with stakeholders outside of the EVA Office, CTSD, and HRP is already in effect on a study-by-study basis; closer coordination on multi-year planning with other EVA stakeholders including academia is being actively pursued. Details of the current Integrated EVA Research Plan are presented including description of ongoing and planned research activities in the areas of: Benchmarking; Anthropometry and Suit Fit; Sensors; Human-Suit Modeling; Suit Trauma Monitoring and Countermeasures; EVA Workload and Duration Effects; Decompression Sickness Risk Mitigation; Deconditioned EVA Performance; and Exploration EVA Concept of Operations.

Abercromby, Andrew F. J.↗
NASA NTRS2017

Integrated Extravehicular Activity Human Research Plan: 2017

Multiple organizations within NASA as well as industry and academia fund and participate in research related to extravehicular activity (EVA). In October 2015, representatives of the EVA Office, the Crew and Thermal Systems Division (CTSD), and the Human Research Program (HRP) at NASA Johnson Space Center agreed on a formal framework to improve multi-year coordination and collaboration in EVA research. At the core of the framework is an Integrated EVA Human Research Plan and a process by which it will be annually reviewed and updated. The over-arching objective of the collaborative framework is to conduct multi-disciplinary cost-effective research that will enable humans to perform EVAs safely, effectively, comfortably, and efficiently, as needed to enable and enhance human space exploration missions. Research activities must be defined, prioritized, planned and executed to comprehensively address the right questions, avoid duplication, leverage other complementary activities where possible, and ultimately provide actionable evidence-based results in time to inform subsequent tests, developments and/or research activities. Representation of all appropriate stakeholders in the definition, prioritization, planning and execution of research activities is essential to accomplishing the over-arching objective. A formal review of the Integrated EVA Human Research Plan will be conducted annually. Coordination with stakeholders outside of the EVA Office, CTSD, and HRP is already in effect on a study-by-study basis; closer coordination on multi-year planning with other EVA stakeholders including academia is being actively pursued. Details of the preliminary Integrated EVA Human Research Plan are presented including description of ongoing and planned research activities in the areas of: physiological and performance capabilities; suit design parameters; EVA human health and performance modeling; EVA tasks and concepts of operations; EVA informatics; human-suit sensors; suit sizing and fit; and EVA injury risk and mitigation. This paper represents the 2017 update to the Integrated EVA Human Research Plan.

Abercromby, Andrew↗
NASA NTRSDate not supplied

Indirect Magnetic Measurements on the Aerodynamic Heating Facility (AHF)

The arc jet complex at NASA Ames Research Center (ARC) investigates various thermal protection systems (TPS) and their performance in high enthalpy flow environments to improve heat shields used in atmospheric entry. The arc jet operates by inducing an arc between two electrodes and passing the heated gas through a supersonic nozzle. The arc plasma is typically a partially ionized air mixture at low temperature (< 2 eV) but operates for long periods of time (up to 30 min) at high power (< 60 MW). However, simulations using the in-house ARC Heater Simulator (ARCHeS) code predict that the arc is still unstable to MHD instabilities, primarily the kink instability, which limit the operational envelope of the facility [1]. Consequently, it is important to better characterize these instabilities to improve facility stability and extend operational ranges. Due to the high enthalpy and long timescales (i.e., minutes) arc diagnostics must be non-invasive (i.e., optical or magnetic). This work will cover the development of tri-axial magnetic hall sensors for arc jet instabilities and subsequent 3D characterization of arc motion. The latest results describing the kink instability amplitude, frequency and wavelength will be presented and represent the first measurements of this instability in a NASA arc jet facility. References: [1] Meurisse, J. (2018). 3D Unsteady Model of Arc Heater Plasma Flow Using the ARC Heater Simulator (ARCHeS), APS Gaseous Electronics Conference, 2018: APS.

Sebastian Vicente Colom↗
DOE OSTI2025

Effect of particle size and moisture on flow performance of loblolly pine anatomical fractions: Experimental findings and model predictions

The rising energy demand has highlighted biomass as a promising next-generation energy source. However, commercializing biomass-derived energy faces challenges, particularly in handling biomass feedstock. Factors like particle size, shape, moisture content, and surface roughness significantly impact biomass flowability. This study addresses a crucial knowledge gap by examining the effects of particle size and moisture content on the flow behavior and shear properties of different anatomical fractions of loblolly pine (Pinus taeda). The bulk shear behavior was examined using a Schulze ring shear tester, while flow performance was tested through gravity-driven flow experiments in a variable wedge-shape hopper. Results were incorporated into empirical and machine learning-based flow prediction models to evaluate their accuracy and limitations. The study found that samples with higher moisture content show higher unconfined yield strength. The critical arching distance increased with particle size, e.g., from approximately 13 and 33 mm for 2- and 6-mm whole chips, respectively at a 32-degree inclination angle. Conversely, the flow rate decreased for a given hopper opening as particle size increased. For instance, at a 60-mm hopper opening and a 32-degree inclination angle, the mass flow rates for 2- and 6-mm whole chips were 7.83 and 6.42 tonne/h, respectively. The empirical model consistently overpredicted the mass flow rate for all anatomical fractions, while the machine learning model more accurately predicted the central tendency of flow rate but was insensitive to varying tissue proportions. These novel findings provide comprehensive characterization of anatomical fractions, reveal significant combined effects of particle size and moisture content on biomass flow behavior, and demonstrate a better predictive accuracy of a machine learning model, all of which are useful for optimizing material handling strategies and biomass utilization technologies in the industry.

09 - BIOMASS FUELS↗
DOE OSTI2025

Temperature-Dependent Structural Transition in Cu-Intercalated Trigonal CuYbSe 2

Rare-earth delafossites, ARCh 2 ; A = alkali metal, R = rare-earth, Ch = chalcogen which consist of intercalated rare-earth metal dichalcogenides, host frustrated triangular lattices that are fertile ground for exotic phenomena. In most cases, the triangular rare-earth sublattice arises from R-3m (No. 166) structures with three layers of rare-earth metal dichalcogenide octahedra or P6 3 /mmc (No. 194) structures with two such layers, analogous to those found in transition metal dichalcogenides. Substituting the alkali metal with Cu + yields a distinct trigonal crystal symmetry P-3m1 (No. 164) in these structures. This symmetry change alters the coordination environment from ASe 6 octahedra in R-3m AYbSe 2 to CuSe 4 tetrahedra in CuYbSe 2 , resulting in shortened rare-earth to rare-earth separations and significantly reduced interlayer distances. Using X-ray single-crystal diffraction, powder neutron diffraction, resistance, and specific heat measurements, a structural transition slightly below room temperature (258 K) is observed. The low-temperature structure is a lower-symmetry I2/m structure, accompanied by partial Cu-site vacancy ordering. The combination of Cu disorder and the triangular lattice geometry in CuYbSe 2 provides a promising platform for investigating frustrated magnetism and unconventional transport phenomena.

Chemical structure↗
DOE OSTI2025

Dual-Wavelength Simultaneous Patterning of Degradable Thermoset Supports for One-Pot Embedded 3D Printing

Vat photopolymerization (VP) techniques have enabled the fabrication of complex geometries while balancing high precision and fast processing times. 3D printed objects are traditionally built layer-by-layer with newly cured layers being structurally supported by previous ones. Fabricating unsupported features such as overhangs and arches risks misalignment and sagging, limiting the range of accessible designs. To overcome this issue, support structures are fabricated along with the primary object as temporary scaffolds that provide stability and conserve print fidelity. For VP specifically, patterning dissolvable sacrificial supports is attractive to avoid manual removal after printing. In this study, we demonstrate a base-degradable thermoset to pattern print supports in a one-pot formulation along with the primary structural material. Efficient printing is enabled using a dual-wavelength negative imaging (DWNI) DLP printer that patterns the degradable thermoset with visible light and the permanent network with UV light, which are simultaneously projected using a single digital micromirror device (DMD). Printed objects undergo thermal postprocessing to enhance the final conversion of the primary material, after which thermoset supports are degraded in a basic, aqueous solution. This approach provides a robust method for the dual-wavelength patterning of sacrificial thermoset supports, broadening the range of accessible 3D printable materials and geometries.

3D printing↗
DOE OSTI2025

The 2024 July 16 solar event: a challenge to the coronal mass ejection origin of long-duration gamma-ray flares

We present a multi-spacecraft analysis of the 2024 July 16 long-duration gamma-ray flare (LDGRF) detected by the Large Area Telescope on the Fermi satellite. The measured > 100 MeV γ-ray emission persisted for over seven hours after the flare impulsive phase, and was characterized by photon energies exceeding 1 GeV and a remarkably hard parent-proton spectrum. In contrast, the phenomena related to the coronal mass ejection (CME)-driven shock linked to this eruption were modest, suggesting an inefficient proton acceleration unlikely to achieve energies well above the 300 MeV pion-production threshold to account for the observed γ-ray emission. Specifically, the CME was relatively slow (∼600 km/s) and the accompanying interplanetary type-II/III radio bursts were faint and short-lived, unlike those typically detected during large events. In particular, the type-II emission did not extend to kilohertz frequencies and disappeared ∼5.5 hours prior to the LDGRF end time. Furthermore, the associated solar energetic particle (SEP) event was very weak, short-duration, and limited to a few tens of MeV, even at magnetically well-connected spacecraft. These findings demonstrate that a very fast CME resulting in a high-energy SEP event is not a necessary condition for the occurrence of LDGRFs, challenging the idea that the high-energy γ-ray emission is produced by the back-precipitation of shock-accelerated ions into the solar surface. The alternative origin scenario based on local particle trapping and acceleration in large-scale coronal loops is instead favored by the observation of giant arch-like structures of hot plasma over the source region that persisted for the entire duration of this LDGRF.

Sun: UV radiation↗
DOE OSTI2025

Magnetic properties of Tm 3+ in layered triangular lattices

Rare-earth chalcogenides, ARCh 2 (A = alkali metal or monovalent ion; R = rare-earth elements; Ch = O, S, and Se), have been identified as promising candidates for exploring a variety of novel frustrated quantum magnetic phenomena. Tm-based series, ATmCh 2 , where Tm 3+ ions are arranged on various frustrated geometric lattices, provide a platform for investigating the competitions among spin–orbit coupling, crystal field effects, and magnetic exchange interactions in the context of geometric frustration. In this study, we present how the crystallographic structures of newly synthesized ATmSe 2 (A = Li and Na) influence their frustrated magnetic behaviors. Both NaTmSe 2 and LiTmSe 2 adopt a delafossite-type structure with a two-dimensional (2D) triangular lattice, but LiTmSe 2 has a much shorter c-axis parameter compared to this in NaTmSe 2 . Both heat capacity and magnetic susceptibility measurements confirm the absence of long-range magnetic order in either compound. However, magnetic measurements data reveals the differences in magnetic interactions: NaTmSe 2 exhibits features of low-dimensional magnetism, likely driven by its layered crystal structure, compared to LiTmSe 2 .

Crystal field theory↗
DOE OSTI2024

2024 Water Splitting Technologies Benchmarking and Protocols Workshop

The sixth annual Advanced Water Splitting Pathways Benchmarking meeting was held on June 11-12, 2024 at the Arizona State University California Center- Los Angeles, CA. A total of 117 people participated (102 in person and 15 via Zoom). Attendance at most breakout sessions ranged from 10 - 25 attendees. The focus of many of the sessions was on developing plans to validate protocols written to date, defining future protocols to be written and aligning with international efforts. The plenary session provided perspectives on international activities in each technology area, as well as an overview of the ARCHES Hydrogen Hub.

08 HYDROGEN↗
DOE OSTI2024

Organisation of Diverse Mechanisms of Secondary Ice Production among Basic Convective and Stratiform Cloud-types

This 3-year DoE-funded joint project had the over-arching aim of understanding how ice is initiated in clouds of various types. Focus was given to processes of fragmentation of pre-existing ice, which can occur in positive feedback loops (‘ice multiplication’). A basic question to address was which fragmentation processes prevail in which basic cloud-types. The approach was to use cloud models and field observations, while pioneering our own lab observations of ice initiation to break the deadlock from the past lack of lab observations. Historically, the tendency of the cloud physics community to avoid doing lab observations has allowed a vast gap in knowledge about ice initiation to persist for decades. During the first part of the project, new formulations were created to treat two overlooked types of fragmentation of ice. First, sublimational breakup of ice was treated based on a theoretical formula that we fitted to a pooled dataset of lab observations published previously in the literature. Second, a new mode of fragmentation of freezing raindrops was treated, which involves a supercooled drop being hit by a more massive ice particle. Some of the secondary droplets from the impact freeze. This work was done at Manchester University by Co-I Connolly. Then during the second part, both formulations were implemented in our ‘aerosol-cloud model’ (AC). AC has a hybrid bin/bulk microphysics scheme, and now represents four processes of SIP. The accuracy of AC was evaluated for four cases typifying four basic cloud-types: slightly cold-based stratiform cloud and cold-, warm- and very warm-based convective clouds. We discovered that the warmth of cloud-base, especially in the tropics, promotes SIP processes of raindrop-freezing fragmentation and rime-splintering, and surprisingly, sublimational breakup too. It was found that breakup in ice-ice collisions is ubiquitous. Finally, a portable laboratory chamber was constructed at Lund and deployed in northern Sweden to observe breakup in graupel-snow collisions outdoors. This was seen to be even more prolific than treated in our 2018 formulation. Papers describing results are either published or soon to be published.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Long-Length SiC/SiC Tube Irradiation Experiment at LWR Temperatures Inserted into HFIR

This report describes the pre-irradiation characterization and successful assembly of a High Flux Isotope Reactor (HFIR) irradiation experiment designed to assess radiation-induced lateral bowing of silicon carbide fiber–reinforced, silicon carbide matrix composite (SiC/SiC) components under a radial fast neutron flux gradient at representative light-water reactor (LWR) temperatures of approximately 300 °C. The over-arching goal of this work is to validate thermomechanical models of SiC/SiC composite fuel assembly distortion used to predict the extent of lateral bowing and dose at which bowing reaches a maximum value. Ultimately, these models are used to ensure that fuel assembly distortion does not block coolant channels, interfere with control rod/blade movements, and/or impact local reactivity. The experiment contains six cladding tube specimens that are approximately 558.5 mm long with representative pressurized water reactor (PWR) outer and inner diameters of 9.5 mm and 7.5 mm, respectively. The specimens were thoroughly characterized prior to irradiation using traditional dimensional inspection and surface profilometry so that these measurements can later be compared with similar measurements that will be made post-irradiation to determine radiation-induced deformations. Furthermore, fine engraving markers were inscribed along the outer surfaces of the specimen and mapped using analytic photography and a three-dimensional stage. This technique allowed for accurate measurements of the marker spacings, which can be compared with similar measurements that will be made post-irradiation to provide local radiation-induced strain mapping. A light curtain optical micrometer was also employed to measure the pre-irradiation bowing of each specimen. The experiment was successfully assembled and inserted into position VXF-19 for HFIR cycle 516, which began May 12, 2026. The experiment will be removed after cycle 519, which is currently scheduled to end in December 2026.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1961

Theory of Electrostatic Fields in the Ionosphere at Equatorial Latitudes

The properties of the elongated electrostatic fields that are required to provide the coupling mechanism in the dynamo-motor concept of the E and F regions of the ionosphere are examined theoretically for the conditions that prevail in equatorial latitudes. The analysis is developed for an electrostatic field of arbitrary horizontal scale in a horizontally stratified partly ionized gas subject to an imposed magnetic field having the form of a parabolic arch over the equator. The anisotropic character and continuous variation with height of the conductivity are retained throughout , and numerical solutions are determined for the attenuation of the electric field with distance along the field line. The results are similar qualitatively to those found previously upon analysis of the corresponding problem for middle latitudes, but the attenuation of the electrostatic field with height is considerably greater. It develops, in particular, that the coupling between E and F regions is very small for fields having horizontal wavelengths of a few kilometers. It follows that the dynamo-motor concept could not be used to account for the presence of irregularities of this scale. On the other hand, it is found that almost all the attenuation occurs at heights near that of the E region. If an electrostatic field having a horizontal wavelength of a few kilometers could be produced at heights of, say 200 km or greater, it follows that it would be very elongated and extend with little change in amplitude from hemisphere to hemisphere. The results also indicate that effective coupling could be achieved for fields having horizontal wavelengths of the order of tens of kilometers, but the assumptions introduced to simplify the analysis may impair the quantitative reliability of the results for fields of this scale.

Briggs, Benjamin R.↗