Results for “ADS” — Page 8

NASA NTRS2012

An Ad-Hoc Adaptive Pilot Model for Pitch Axis Gross Acquisition Tasks

An ad-hoc algorithm is presented for real-time adaptation of the well-known crossover pilot model and applied to pitch axis gross acquisition tasks in a generic fighter aircraft. Off-line tuning of the crossover model to human pilot data gathered in a fixed-based high fidelity simulation is first accomplished for a series of changes in aircraft dynamics to provide expected values for model parameters. It is shown that in most cases, for this application, the traditional crossover model can be reduced to a gain and a time delay. The ad-hoc adaptive pilot gain algorithm is shown to have desirable convergence properties for most types of changes in aircraft dynamics.

Hanson, Curtis E.↗

NASA NTRS2019

A Global Assessment of Added Value in the SMAP Level-4 Soil Moisture Product Relative to Its Baseline Land Surface Model

The Soil Moisture Active Passive (SMAP) Level-4 product provides enhanced soil moisture estimates by assimilating SMAP brightness temperature observations into a land surface model. Here, an unbiased qualitative estimate of the relative skill of SMAP Level-4 and model-only surface soil moisture (versus true soil moisture) is derived using only one additional noisy (but independent) soil moisture product. The method is applied globally and verified using high-quality, ground-based measurements where available. Results demonstrate that assimilating SMAP brightness temperature has relatively little impact in data-rich areas like the United States and Europe. In contrast, much larger improvement is observed in data-sparse regions, including much of Africa and central Australia, where model-only simulations are disproportionately impacted by low-quality model forcing. Therefore, ground validation conducted in data-rich areas does not adequately sample the added value of SMAP data assimilation for data-sparse regions and substantially underestimates the added skill provided by the SMAP Level-4 system.

SMAP L4↗

NASA NTRS2020

Pale Blue Dot Explorer: A Case for Adding Earth to the Planetary Sciences List of Targets

Obtaining observational data to inform the science of future missions focused on Earth-like exoplanets is of prime importance for NASA Planetary Science and Astrobiology. However, Earth observations as a proxy for an exoplanet is an area of interdivisional research not well captured by existing NASA programs. To accommodate this, we propose adding Earth to the list of planets allowable by NASA Planetary Science Division’s objectives and adding Earth observation to the cruise phase of planetary probes. A specific research investigation would be a spacecraft whose goal would be to characterize Earth as an exoplanet proxy — a Pale Blue Dot Explorer. Such a mission’s objective would be to monitor the habitability and biological signatures of Earth in reflected light over broad wavelengths and phase angles.

Sanjoy M. Som↗

NASA NTRSDate not supplied

Preserving NASA Historic and Current Mission Data and Adding Value to These for Future Researchers

The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) has been actively involved in many aspects of ensuring the long-term preservation of NASA earth science data and knowledge. This involves both the recovery and preservation of early NASA meteorological and other earth observation data, as well as preserving the more recent Earth Observation System (EOS) mission data sets which continue or have reached their end of lifetime. The GES DISC adds value to these preserved data by adding metadata and making the data available online to future researchers. The early NASA meteorological and earth observation data sets from the 1960s and 70s were originally archived on magnetic tapes, and visualizations of these data were preserved on 70-mm film. As these media have aged, their contents have been at risk of permanent loss. NASA has given the task of preserving these early data sets to the GES DISC and making these data sets easily available to the public. The data from these early missions are potentially useful to climate researchers as these are some of the only global measurements made at their time. These old data on magnetic tapes and film strips do not contain easily readable metadata, and so to add value the GES DISC has added digital metadata to them so that the data are searchable and findable. The GES DISC is also involved in preserving the data and knowledge from the EOS era missions. The GES DISC follows the guidelines developed for the preservation of data as specified in the NASA EOS Data and Information System (EOSDIS) Earth Science Data Preservation Content Specification (423-SPEC-001) document. To date, the GES DISC has consulted with the data science teams from the following missions: UARS, Earth Probe TOMS, Aura HIRDLS, and SORCE, in order to properly preserve their data and accompanying documentation. The GES DISC is also currently working with the EOS science teams from TRMM, AIRS, MLS, OMI and additional missions to ensure that the relevant documents and data sets are properly archived for future researchers. A standardized procedure for mission data preservation following 423-SPEC-001 makes preservation among the many NASA EOSDIS data centers uniform, so that these could be transitioned easily to a common EOSDIS preservation repository. This presentation will give an overview of the preservation and recovery of the old NASA historical data sets archived at the GES DISC, as well as the data and documentation preservation efforts of the EOS era missions.

James Johnson↗

DOE OSTI2021

Added value for integrated marine energy data systems

Launched in 2019, the Portal and Repository for Information on Marine Renewable Energy (PRIMRE) provides centralized access, standardization, community building, and integration of United States (U.S.) databases, tools and codes, and other resources that cover a range of marine energy information. The PRIMRE universe contains a series of Knowledge Hubs that represent data and information on testing of marine energy devices (MHKDR); environmental effects (Tethys); engineering and technical papers (Tethys Engineering); descriptions of marine energy companies and technologies (Marine Energy Projects Database); codes and models (Marine Energy Software); and guidance on testing and measurements (Telesto). Content is added to PRIMRE by applying a set of Guidelines and Best Practices (PRIMRE Guidelines). An aggregate search across the PRIMRE site enables users to find data and information from all the PRIMRE Knowledge Hubs simultaneously, using a single entry-point (PRIMRE Search). In addition to providing access to a range of data and information on marine energy development, testing, and effects, PRIMRE allows for the development of value added products and processes that will help move the marine energy industry forward. The PRIMRE team has recently launched two key initiatives in the U.S.—Signature Projects and Lessons Learned. Outputs and outcomes from these two initiatives will be highlighted in this paper. The Signature Projects initiative is intended to bring focus to a selection of ongoing and completed marine energy projects funded by the U.S. Department of Energy’s Water Power Technologies Office (WPTO), and to inform the marine energy community of what investigations have been undertaken, what tools are available, and where gaps in information persist. Each Signature Project tags papers, reports, and data from large marine energy research projects, providing easy access and attention to all the output and associated products from each project. The Lessons Learned initiative is intended to ensure that hard-won achievements are recognized and available for those who come later, that missteps and unfortunate outcomes can be prevented in future, and that efficiencies and effective shortcuts can be publicized and used as the marine energy industry moves forward. This initiative builds off the Knowledge Hubs and reaches out to members of the marine energy community, particularly technology developers and researchers, to integrate experience in the development, deployment, assessment, success, and challenges while creating this new industry and field of study.

Copping, Andrea E.↗

DOE OSTI2021

Added value for integrated marine energy data systems

Launched in 2019, the Portal and Repository for Information on Marine Renewable Energy (PRIMRE) provides centralized access, standardization, community building, and integration of United States (U.S.) databases, tools and codes, and other resources that cover a range of marine energy information. The PRIMRE universe contains a series of Knowledge Hubs that represent data and information on testing of marine energy devices (MHKDR); environmental effects (Tethys); engineering and technical papers (Tethys Engineering); descriptions of marine energy companies and technologies (Marine Energy Projects Database); codes and models (Marine Energy Software); and guidance on testing and measurements (Telesto). Content is added to PRIMRE by applying a set of Guidelines and Best Practices (PRIMRE Guidelines). An aggregate search across the PRIMRE site enables users to find data and information from all the PRIMRE Knowledge Hubs simultaneously, using a single entry-point (PRIMRE Search). In addition to providing access to a range of data and information on marine energy development, testing, and effects, PRIMRE allows for the development of value added products and processes that will help move the marine energy industry forward. The PRIMRE team has recently launched two key initiatives in the U.S.—Signature Projects and Lessons Learned. Outputs and outcomes from these two initiatives will be highlighted in this paper. The Signature Projects initiative is intended to bring focus to a selection of ongoing and completed marine energy projects funded by the U.S. Department of Energy’s Water Power Technologies Office (WPTO), and to inform the marine energy community of what investigations have been undertaken, what tools are available, and where gaps in information persist. Each Signature Project tags papers, reports, and data from large marine energy research projects, providing easy access and attention to all the output and associated products from each project. The Lessons Learned initiative is intended to ensure that hard-won achievements are recognized and available for those who come later, that missteps and unfortunate outcomes can be prevented in future, and that efficiencies and effective shortcuts can be publicized and used as the marine energy industry moves forward. This initiative builds off the Knowledge Hubs and reaches out to members of the marine energy community, particularly technology developers and researchers, to integrate experience in the development, deployment, assessment, success, and challenges while creating this new industry and field of study.

Copping, Andrea E.↗

DOE OSTI2024

Ad-Mat: Adaptations of Mature Manufacturing Strategies for Accelerated Redox Flow Battery Deployment

The concept of the Ad-Mat approach is to leverage existing adjacent markets across a broad scope of technologies in order to reduce the manufacturing learning curve and ultimately accelerate redox flow battery (RFB) deployment at scale. Lithium-ion batteries (LIBs) are currently the dominant energy storage technology, and they came to technological maturity under unique market conditions when there was no meaningful competition in the consumer electronic and electric vehicle (EV) space. Today, alternative chemistries that may be technologically better-suited for long-duration storage applications are experiencing a high barrier to entry. This is in large part due to the substantial bias towards the scaled-up production and supply chain that now exists for LIBs. In the case of RFBs in particular, numerous analyses have suggested that RFBs should theoretically have a much lower system cost than LIBs - however, this relies on a mature and competitive manufacturing landscape, which has been extremely challenging to achieve for both flow batteries and other LIB competitors. At the moment, LIB alternatives tend to have isolated small-scale manufacturing pathways, which preclude the economies of scale that would be required to compete with the mature LIB industry. In the present state of the industry, niche manufacturing tools and approaches have evolved to support each alternative technology, such that there is substantial replication and duplication in effort. Continuing to pursue a strategy of isolated manufacturing processes/approaches for each LIB-alternative may never allow for at-scale deployment. In order for RFBs to meaningfully compete with LIBs in the realm of LDES, a new disruptive approach based on cross-industry learning and coordination is needed - and this is exactly what our Ad-Mat concept aims to tackle. In this re-envisioned manufacturing landscape, tools and processes from mature industries can be adapted and deployed across the range of alternative energy storage technologies. Adapting tools, equipment, processes, and industrial learning from mature industries to meet the technological requirements of RFBs would open new markets for existing OEMs in adjacent industries, would prevent unnecessary duplication and re-development, would improve efficiency across the manufacturing chain, and would ultimately support reduced costs and accelerated deployment of RFBs at scale.

adaptive manufacturing↗

DOE OSTI2024

AdS Higgs mechanism from double trace deformed CFT

Explicit breaking of a global symmetry in a conformal field theory is holographically dual to giving mass to a gauge field living in AdS via the Higgs mechanism. We show that if this breaking is induced via a double trace deformation the Higgs mechanism is induced via a scalar loop diagram. The mass can be calculated analytically in both bulk and field theory and we find perfect agreement. While representing familiar physics, the mechanism is identical to how the graviton picks up a mass in the holographic dual of a conformal field theory coupled to a bath.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2020

Microscopic entropy of rotating electrically charged AdS 4 black holes from field theory localization

We employ supersymmetric localization to determine the exact partition function of 3d N = 2 gauge theories on a background given by a round S 2 fibered over a circle and certain complexified background fields. The Coulomb branch localization locus includes monopole configurations, and the partition function reduces to a matrix model. We consider the partition function of the ABJM theory on this background as an explicit case. We verify that the large-N limit of the ABJM theory partition function produces, in the Cardy limit, the entropy function of the dual rotating, electrically charged asymptotically AdS 4 supersymmetric black holes and thus provides a microscopic explanation for the Bekenstein-Hawking entropy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2020

AdS 6 /CFT 5 with O7-planes

Type IIB AdS6 solutions with orientifold 7-planes are constructed. The geometry is a warped product of AdS 6 and S 2 over a Riemann surface Σ and the O7-planes correspond to a particular type of puncture on Σ. The solutions are identified as near-horizon limits of (p,q) 5-brane webs with O7-planes. The dual 5d SCFTs have relevant deformations to linear quiver gauge theories which have SO(•) or USp(•) nodes or SU(•) nodes with hypermultiplets in symmetric or antisymmetric representations, in addition to SU(•) nodes with fundamental hypermultiplets. The S 5 free energies are obtained holographically and matched to field theory computations using supersymmetric localization to support the proposed dualities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2021

AdS 3 gravity and random CFT

We compute the path integral of three-dimensional gravity with negative cosmological constant on spaces which are topologically a torus times an interval. These are Euclidean wormholes, which smoothly interpolate between two asymptotically Euclidean AdS 3 regions with torus boundary. From our results we obtain the spectral correlations between BTZ black hole microstates near threshold, as well as extract the spectral form factor at fixed momentum, which has linear growth in time with small fluctuations around it. The low-energy limit of these correlations is precisely that of a double-scaled random matrix ensemble with Virasoro symmetry. Our findings suggest that if pure three-dimensional gravity has a holographic dual, then the dual is an ensemble which generalizes random matrix theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

Binary AdS black holes coupled to a bath in Type IIB

We construct Type IIB string theory setups which, via double holography, realize two gravitational systems in separate AdS spaces which interact with each other and with a non-gravitational bath. We employ top-down string theory solutions with concrete field theory duals in the form of 4d $\mathcal{N}$ = 4 SYM BCFTs and a first-principles notion of double holography. The setups are used to realize pairs of ‘near’ and ‘far’ black holes from the perspective of the bath, which exchange Hawking radiation with each other and radiate into the bath. We identify three phases for the entropy in the bath characterized as no island, partial island and full island, and discuss the entropy curves. The setups differ from the black hole binaries observed in gravitational wave experiments but may capture certain aspects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2020

AdS 5 black hole entropy near the BPS limit

We analyze AdS 5 black holes that are nearly supersymmetric. They depart from the BPS limit in two distinct ways: a temperature takes them above extremality and a potential maintains extremality but violates a certain constraint. We study the thermodynamics of these deformations and their interplay in detail. We discuss recent microscopic computations of BPS black hole entropy in N = 4 SYM and generalize the arguments to the nearBPS regime by relaxing constraints imposed by supersymmetry. Our methods recover gravitational results from microscopic theory also for nearBPS black holes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2020

A one-loop test of the near-AdS 2 /near-CFT 1 correspondence

We analyze quantum fluctuations around black hole solutions to the Jackiw-Teitelboim model. We use harmonic analysis on Euclidean AdS 2 to show that the logarithmic corrections to the partition function are determined entirely by quadratic holomorphic differentials, even when conformal symmetry is broken and harmonic modes are no longer true zero modes. Our quantum-corrected partition function agrees precisely with the SYK result. We argue that our effective quantum field theory methods and results generalize to other theories of two-dimensional dilaton gravity.

2D Gravity↗

DOE OSTI2023

Exact QFT duals of AdS black holes

We construct large N saddle points of the matrix model for the $\mathcal{N}$ = 4 Yang- Mills index dual to the BPS black holes in AdS 5 × S 5 , in two different setups. When the two complex chemical potentials for the angular momenta are collinear, we find linear eigenvalue distributions which solve the large N saddle point equation. When the chemical potentials are not collinear, we find novel solutions given by areal eigenvalue distributions after slightly reformulating the saddle point problem. We also construct a class of multi-cut saddle points, showing that they sometimes admit nontrivial filling fractions. As a byproduct, we find that the Bethe ansatz equation emerges from our saddle point equation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2021

Non-supersymmetric $AdS_6$ and the swampland

We discuss infinite families of non-supersymmetric AdS 6 solutions in Type IIB string theory. They are siblings of supersymmetric solutions which are associated with (p,q) 5-brane webs and holographically dual to 5d SCFTs engineered by those brane webs. The non-supersymmetric backgrounds carry identical 5-brane charges and are connected to the supersymmetric ones by RG flows. We study the stability of the non-supersymmetric solutions, identifying perturbative and non-perturbative decay channels for all the backgrounds explicitly available. We also identify likely decay mechanisms for solutions that have not been constructed explicitly but may be expected to exist based on brane web considerations. Finally, we exclude scale separation by constructing universal spin 2 modes with masses comparable to the mass-scale of the cosmological constant.

supersymmetry breaking↗

DOE OSTI2024

Supergravity spectrum of AdS 5 black holes

We embed Kerr-Newman-AdS black holes into N = 8 gauged supergravity and study quadratic fluctuations around the black hole backgrounds of all fields in the larger theory. The equations of motion of the perturbations are partially diagonalized by the group theory of broken symmetry. Nearly all fields in theory have non-minimal couplings, so their equations of motion are not merely massive Klein-Gordon equations with minimal coupling to background gauge fields, and their analogues for fields with spin. In the special case of extremal black holes we identify specific modes of instability, some of which touch supersymmetric locus. For example, we identify scalar fields in supergravity that condense in the near horizon region and transition the black hole into a superconducting phase. We also identify supergravity modes that are susceptible to superradiant instability.

AdS-CFT Correspondence↗

DOE OSTI2022

Introduction of the Adding and Doubling Method for Solving Bateman Equations for Nuclear Fuel Depletion

This paper introduces and evaluates the Adding and Doubling Method (ADM) for solving the Bateman equations for depletion systems with varying numbers of nuclides and compares it to the Chebyshev Rational Approximation Method (CRAM), both implemented in the reactor physics analysis application Griffin. ADM, when applied to the Crank-Nicolson Finite Difference method, can produce results comparable in accuracy and precision to CRAM with comparable run times for systems with 35 or 297 nuclides. For systems with more than 300 nuclides, the matrix-matrix operations required by ADM are significantly more costly than the matrix-vector operations required by CRAM, making CRAM the more efficient method for systems with large numbers of nuclides. ADM is an accurate method that maintains other advantages over CRAM in that it does not depend on pre-generated coefficients or require complex number operations. ADM also manages to outperform CRAM by a factor of more than 250 in terms of run time for depletion systems that require multiple Bateman solves while the depletion matrix and time step size remain constant over all depletion intervals.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗