SEARCH · Engineering Papers

Results for “ADI”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8

All sources NASA NTRS DOE OSTI

NASA NTRS1989

A pseudo-spectral collocation method applied to the problem of convective diffusive transport in fluids subject to unsteady residual accelerations

The problem of determining the sensitivity of Bridgman-Stockbarger directional solidification experiments to residual accelerations of the type associated with spacecraft in low earth orbit is analyzed numerically using a pseudo-spectral collocation method. The approach employs a novel iterative scheme combining the method of artificial compressibility and a generalized ADI method. The results emphasize the importance of the consideration of residual accelerations and careful selection of the operating conditions in order to take full advantages of the low gravity conditions.

Alexander, J. Iwan↗

NASA NTRS1991

Navier-Stokes computation of wing/rotor interaction for a tilt rotor in hover

A method has been developed to analyze the wing/rotor interaction of tilt rotor aircraft in hover. The unsteady, thin-layer compressible Navier-Stokes equations are solved using an implicit, finite difference scheme that employs LU-ADI factorization. The rotor is modeled as an actuator disk which imparts a radial and azimuthal distribution of pressure rise and swirl to the flowfield. The 'chimera' approach of grid point blanking is used to update the rotor boundary conditions. Results are presented for both a rotor alone and for wing/rotor interaction where the thrust coefficient is 0.0164 and wing flap deflection is 67 degrees. Many of the complex flow features are captured including the fountain effect, leading and trailing edge separation, and the unsteady wake beneath the wing. Wing surface pressures compare fairly well with experimental data although the time-averaged download is about twenty percent higher than the measured value. This discrepancy is due to a combination of factors that are discussed.

Fejtek, Ian↗

NASA NTRS1991

Computational aspects of chemically reacting flows

An implicit, time-dependent approach is taken to solve the inviscid conservative equations in a vertex-based finite-volume formulation. The convective fluxes are estimated by a modified Riemann solver, and higher-order accuracy is obtained by means of the MUSCL. Implicit techniques are adopted to deal with the equation stiffness as a result of the clustered grid and chemical source term. The real-gas Roe matrix and the ADI and LU schemes have been tested on the sample problems: hypersonic flow over blunt configurations, such as the forebody of a double ellipse, and the near wake of a conic aerobrake. Temperature distribution and standoff distance are validated against the shock-fitting, central-differencing results. Equilibrium temperature may be recovered by artificially increasing the chemical rates at the wall. The present method satisfactorily resolves the flow structure, including the strong expansion behind the flat base. The relative merits and performance of the real-gas TVD and implicit schemes are discussed briefly.

Li, C. P.↗

NASA NTRS1991

A numerical study of the flow establishment time in hypersonic shock tunnels

This paper presents a numerical study of unsteady hypersonic viscous flows in 2D hypersonic shock tunnels. The numerical experiments on the combined nozzle/model flows, utilizing the configurations mounted in the test section of a 14.7-long shock tunnel, which has a design Mach number of Me = 6 and a stagnation temperature of T(0) = 3063 R, have been performed by solving the 2D Navier-Stokes equations with an ADI-type TVD scheme. The flow establishment times around aerodynamic models, such as a flat plate, a biconvex airfoil, thin and thick double wedges, and a circular cylinder, are calculated and compared. The analysis shows that, for the most severely separated case of a circular cylinder, the flow becomes stabilized within about 8 msec including the starting process, and its nondimensional flow establishment time is 46. The flow establishment time increases with increasing length of the separated region and decreases with increasing freestream velocity.

Lee, Jang-Yeon↗

NASA NTRS1991

Effects of leading-edge flap oscillation on unsteady delta wing flow and rock control

The isolated and interdisciplinary problems of unsteady fluid dynamics and rigid-body dynamics and control of delta wings with and without leading-edge flap oscillation are considered. For the fluid dynamics problem, the unsteady, compressible, thin-layer Navier-Stokes (NS) equations, which are written relative to a moving frame of reference, are solved along with the unsteady, linearized, Navier-displacement (ND) equations. The NS equations are solved for the flowfield using an implicit finite-volume scheme. The ND equations are solved for the grid deformation, if the leading-edge flaps oscillate, using an ADI scheme. For the dynamics and control problem, the Euler equation of rigid-body rolling motion for a wing and its flaps are solved interactively with the fluid dynamics equations for the wing-rock motion and subsequently for its control. A four-stage Runge-Kutta scheme is used to explicitly integrate the dynamics equation.

Kandil, Osama A.↗

NASA NTRS1991

A Fourier-Chebyshev pseudospectral method for solving steady 3-D Navier-Stokes and heat equations in cylindrical cavities

A Fourier-Chebyshev pseudospectral method for solving steady 3D Navier-Stokes equations in cylindrical cavities is presented and discussed. The general method is pseudo-unsteady and uses a semi-implicit finite difference scheme for the time discretization. The generalized ADI (Alternating Direction Implicit) procedure is then applied to reduce the problem to a successive solution of one-dimensional problems. The spatial approximation uses a Fourier-Galerkin approximation in the periodic direction and a Chebyshev-collocation approximation in the other directions. Difficulties related to the pressure are surmounted by using the artifical compressibility method. A suitable variable change was chosen to avoid the problem of singularity at the axis generated by cylindrical coordinates. The method is first tested on an advection-diffusion equation and then on the Navier-Stokes equations. Finally, the method is illustrated by a convection problem of a differentially heated fluid.

Pulicani, J. P.↗

NASA NTRS1992

Implementation/validation of a low Reynolds number two-equation turbulence model in the Proteus Navier-Stokes code: Two-dimensional/axisymmetric

The implementation and validation of the Chien low Reynolds number k-epsilon turbulence model in the two dimensional axisymmetric version Proteus, a compressible Navier-Stokes computer code, are presented. The set of k-epsilon equations are solved by marching in time using a coupled alternating direction implicit (ADI) solution procedure with generalized first or second order time differencing. To validate Proteus and the k-epsilon turbulence model, laminar and turbulent computations were done for several benchmark test cases: incompressible fully developed 2-D channel flow; fully developed axisymmetric pipe flow; boundary layer flow over a flat plate; and turbulent Sajben subsonic transonic diffuser flows. Proteus results from these test cases showed good agreement with analytical results and experimental data. Detailed comparisons of both mean flow and turbulent quantities showed that the Chien k-epsilon turbulence model given good results over a wider range of turbulent flow than the Baldwin-Lomax turbulence model in the Proteus code with no significant CPU time penalty for more complicated flow cases.

Bui, Trong T.↗

NASA NTRS1992

Development of a multigrid transonic potential flow code for cascades

Finite-volume methods for discretizing transonic potential flow equations have proven to be very flexible and accurate for both two and three dimensional problems. Since they only use local properties of the mapping, they allow decoupling of the grid generation from the rest of the problem. A very effective method for solving the discretized equations and converging to a solution is the multigrid-ADI technique. It has been successfully applied to airfoil problems where O type, C type and slit mappings have been used. Convergence rates for these cases are more than an order of magnitude faster than with relaxation techniques. In this report, we describe a method to extend the above methods, with the C type mappings, to airfoil cascade problems.

Steinhoff, John↗

NASA NTRS1992

Fast methods to numerically integrate the Reynolds equation for gas fluid films

The alternating direction implicit (ADI) method is adopted, modified, and applied to the Reynolds equation for thin, gas fluid films. An efficient code is developed to predict both the steady-state and dynamic performance of an aerodynamic journal bearing. An alternative approach is shown for hybrid journal gas bearings by using Liebmann's iterative solution (LIS) for elliptic partial differential equations. The results are compared with known design criteria from experimental data. The developed methods show good accuracy and very short computer running time in comparison with methods based on an inverting of a matrix. The computer codes need a small amount of memory and can be run on either personal computers or on mainframe systems.

Dimofte, Florin↗

NASA NTRS1992

The impact of time step definition on code convergence and robustness

We have implemented preconditioning for multi-species reacting flows in two independent codes, an implicit (ADI) code developed in-house and the RPLUS code (developed at LeRC). The RPLUS code was modified to work on a four-stage Runge-Kutta scheme. The performance of both the codes was tested, and it was shown that preconditioning can improve convergence by a factor of two to a hundred depending on the problem. Our efforts are currently focused on evaluating the effect of chemical sources and on assessing how preconditioning may be applied to improve convergence and robustness in the calculation of reacting flows.

Venkateswaran, S.↗

NASA NTRS1992

Computation of the flow field in a centrifugal impeller with splitter blades

To support the design effort of the Space Transportation Main Engine (STME) Fuel Pump Stage, viscous flow calculations were performed in a centrifugal impeller with splitter blades. These calculations were carried out with a Navier-Stokes solver (MINT), which employs a linearized block-implicit Alternating Direction Implicit (ADI) procedure to iteratively solve a finite difference form of the system of conservation equations of mass, momentum, and energy in body-fitted coordinates. A computational grid was generated algebraically for the 'channel' between two main blades of the impeller and extended both upstream of the impeller inlet and downstream of the impeller exit so that the appropriate boundary conditions could be applied. The results of the calculations show that although the overall level of flow distortion near the impeller exit is not very large, there is a noticeable difference between the flow patterns in the two 'passages' (one passage between the pressure side of the splitter blade and the suction side of the next full blade).

Dejong, Frederik J.↗

NASA NTRS1992

Surface tension and buoyancy-driven flow in a non-isothermal liquid bridge

The Navier-Stokes-Boussinesq equations governing the transport of momentum, mass and heat in a nonisothermal liquid bridge with a temperature-dependent surface tension are solved using a vorticity-stream-function formulation together with a nonorthogonal coordinate transformation. The equations are discretized using a pseudo-unsteady semi-implicit finite difference scheme and are solved by the ADI method. A Picard-type iteration is adopted which consists of inner and outer iterative processes. The outer iteration is used to update the shape of the free surface. Two schemes have been used for the outer iteration; both use the force balance normal to the free surface as the distinguished boundary condition. The first scheme involves successive approximation by the direct solution of the distinguished boundary condition. The second scheme uses the artificial force imbalance between the fluid pressure, viscous and capillary forces at the free surface which arises when the boundary condition for force balance normal to the surface is not satisfied. This artificial imbalance is then used to change the surface shape until the distinguished boundary condition is satisfied. These schemes have been used to examine a variety of model liquid bridge situations including purely thermocapillary-driven flow situations and mixed thermocapillary- and bouyancy-driven flow.

Zhang, Yiqiang↗

NASA NTRS1992

Propulsion-related flowfields using the preconditioned Navier-Stokes equations

A previous time-derivative preconditioning procedure for solving the Navier-Stokes is extended to the chemical species equations. The scheme is implemented using both the implicit ADI and the explicit Runge-Kutta algorithms. A new definition for time-step is proposed to enable grid-independent convergence. Several examples of both reacting and non-reacting propulsion-related flowfields are considered. In all cases, convergence that is superior to conventional methods is demonstrated. Accuracy is verified using the example of a backward facing step. These results demonstrate that preconditioning can enhance the capability of density-based methods over a wide range of Mach and Reynolds numbers.

Venkateswaran, S.↗

NASA NTRS1992

Improving the efficiency of aerodynamic shape optimization procedures

The computational efficiency of an aerodynamic shape optimization procedure which is based on discrete sensitivity analysis is increased through the implementation of two improvements. The first improvement involves replacing a grid point-based approach for surface representation with a Bezier-Bernstein polynomial parameterization of the surface. Explicit analytical expressions for the grid sensitivity terms are developed for both approaches. The second improvement proposes the use of Newton's method in lieu of an alternating direction implicit (ADI) methodology to calculate the highly converged flow solutions which are required to compute the sensitivity coefficients. The modified design procedure is demonstrated by optimizing the shape of an internal-external nozzle configuration. A substantial factor of 8 decrease in computational time for the optimization process was achieved by implementing both of the design improvements.

Burgreen, Greg W.↗

NASA NTRS1991

Computational results for 2-D and 3-D ramp flows with an upwind Navier-Stokes solver

An implicit, finite-difference, upwind, full Navier-Stokes solver was applied to supersonic/hypersonic flows over two-dimensional ramps and three-dimensional obstacle. Some of the computed results are presented. The numerical scheme used in the study is an implicit, spatially second order accurate, upwind, LU-ADI scheme based on Roe's approximate Reimann solver with MUSCL differencing of Van Leer. An algebraic grid generation scheme based on generalized interpolation scheme was used in generating the grids for the various 2-D and 3-D problems.

Venkatapathy, Ethiraj↗

NASA NTRS1993

The effect of grid aspect ratio on convergence

Vector stability theory and computational experiments are used to examine the effects of high aspect ratio grids on algorithm convergence. Emphasis is placed on identifying the degree of convergence deterioration that ADI schemes experience as grid aspect ratio increases and on deriving methods for circumventing this problem. Approximately factored implicit schemes are found to experience convergence deterioration because of nonoptimum local time stepping procedures and the increased need for viscous preconditioning. An enhanced algorithm is devised on the basis of improved selection of the local time step, appropriate definition of viscous preconditioning matrix, and proper implementation of boundary conditions. The novel algorithm provides uniformly efficient convergence at all aspect ratios for both Euler and Navier-Stokes computations for a variety of test problems.

Buelow, P. E. O.↗

NASA NTRS1993

Navier-Stokes simulation of external/internal transonic flow on the forebody/inlet of the AV-8B Harrier II

In this work, the computation of combined external/internal transonic flow on the complex forebody/inlet configuration of the AV-8B Harrier II is performed. The actual aircraft has been measured and its surface and surrounding domain, in which the fuselage and inlet have a common wall, have been described using structured grids. The 'thin-layer' Navier-Stokes equations were used to model the flow along with the Chimera embedded multi-block technique. A fully conservative, alternating direction implicit (ADI), approximately factored, partially fluxsplit algorithm was employed to perform the computation. Comparisons to some experimental wind tunnel data yielded good agreement for flow at zero incidence and angle of attack. The aim of this paper is to provide a methodology or computational tool for the numerical solution of complex external/internal flows.

Mysko, Stephen J.↗

NASA NTRS1993

A numerical study of the unsteady processes associated with the type IV shock interaction

A time-dependent ADI formulation of the two dimensional Navier-Stokes equations coupled with the total variation diminishing (TVD) scheme is used to examine the type IV shock interaction time accurately. The experimentally measured and computationally calculated unsteadiness of the type IV interaction is shown to be related to the formation and shedding of shear layers in the shock layer, and the frequency of oscillation of the jet is a strong function of the shedding rate of these shear layers. For one particular geometry, an oscillation frequency of 1.4 kHz was calculated. The effects of shock impingement angle and shock strength on the location and magnitude of the peak pressure are also identified. In one case it is shown that a 1-deg change in the impinging shock angle can alter the location of the associated jet by almost 11 deg with a change in the peak surface pressure of 32 percent.

Lind, Charles A.↗