Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ABA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 145 records · Page 8
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Enhanced Mechanical and Adhesion Properties in Sustainable Triblock Copolymers via Non-covalent Interactions

ABA triblock copolymers are used as thermoplastic elastomers (TPEs) for a wide variety of applications. In this paper, we describe incorporation of sugar-based glassy components to create sustainable triblock copolymers as alternatives for commodity TPEs. Poly(glucose-6-acrylate-1,2,3,4-tetraacetate) [PGATA] and poly(acetylated acrylic isosorbide) [PAAI] end blocks were chain-extended from a poly( n -butyl acrylate) [PnBA] midblock. PAAI–PnBA–PAAI exhibited excellent adhesion properties: peel = 8.74 N cm –1 , loop tack = 2.96 N cm –2 , no shear failure up to 100 h, and shear adhesion failure temperature (SAFT) = 60 °C. Although similar peel adhesion and higher loop tack were observed for PGATA–PnBA–PGATA, the shear strength and SAFT were moderate (18 h and 42 °C, respectively). PAAI–PnBA–PAAI are tough elastomers and demonstrated high stress and elongation at break (σ = 6.5 MPa and ε = 620%, respectively) while the GATA-based analogue exhibited weaker tensile properties (σ = 0.8 MPa and ε = 476%). To address this, the anomeric hydroxyl groups of GATA units were selectively deprotected to promote self-complementary hydrogen bonding in the glassy domains, resulting in 80% enhancement in the ultimate tensile stress at break (σ = 1.5 MPa). This study aims to demonstrate effects of noncovalent interactions, such as chain entanglements and self-complementary hydrogen bonding, to enhance the adhesion and mechanical performance of sugar-derived TPEs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

UCST-Type Thermoresponsive Polymers in Synthetic Lubricating Oil Polyalphaolefin (PAO)

Here, this article reports a family of UCST-type thermoresponsive polymers, poly(alkyl methacrylate)s with an appropriate alkyl pendant length, in an industrially important non-volatile organic liquid polyalphaolefin (PAO). The cloud point (CP) can be readily tuned over a wide temperature range by changing the alkyl pendant length; at a concentration of 1 wt% and similar polymer molecular weights, the CP varies linearly with the (average) number of carbon atoms in the alkyl pendant. PAO solutions of ABA triblock copolymers, composed of a PAO-philic middle block and thermoresponsive outer blocks with appropriate block lengths, undergo thermoreversible sol-gel transitions at sufficiently high concentrations. The discovery of thermoresponsive polymers in PAO makes it possible to explore new applications by utilizing PAO’s unique characteristics such as thermal stability, non-volatility, superior lubrication properties, etc. Lastly, two examples are presented: thermoresponsive physical gels for control of optical transmittance and injectable gel lubricants.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Microphase-Separated Morphologies and Molecular Network Topologies in Multiblock Copolymer Gels

Strong physical gels derived from thermoplastic elastomeric ABA triblock copolymers solvated with a midblock-selective oil continue to find use in increasingly diverse applications requiring highly elastic and mechanically robust soft materials with tunable properties. Here, in this study, we first investigate the morphological characteristics of thermoplastic elastomer gels (TPEGs) derived from a homologous series of linear A(BA) n multiblock copolymers composed of styrene and hydrogenated isoprene repeat units and possessing comparable molecular weight but varying in the number of B-blocks: 1 (triblock), 2 (pentablock), and 3 (heptablock). Small-angle X-ray scattering performed at ambient temperature confirms that (i) increasing hydrogenation reduces the microdomain periodicity of the neat copolymers and (ii) increasing the oil concentration of the TPEGs tends to swell the nanostructure (increasing the periodicity), but concurrently decreases the size of the styrenic micelles, to different extents depending on the molecular architecture. Complementary dissipative particle dynamics simulations reveal the level to which midblock bridging, which is primarily responsible for the elasticity in this class of materials, is influenced by both oil concentration and molecular architecture. Since constrained topological complexity increases with increasing block number, we introduce a midblock conformation index that facilitates systematic classification of the different topologies involved in nearest-micelle bridge formation. Lastly, those possessing at least one bridged and one looped midblock with no dangling ends are found to be the most predominant topologies in the pentablock and heptablock networks.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A Ba 6 Cu 31 Te 22 ( A = K, Rb, Cs) Featuring Polyanionic Copper–Telluride Frameworks with Ultralow Thermal Conductivity

In this study, hree polyanionic tellurides, ABa 6 Cu 31 Te 22 (A = K, Rb, Cs), were synthesized in salt flux. The isostructural tellurides crystallize in a new structure type, in the cubic Pa$\overline{3}$ space group with a Wyckoff sequence of d 10 c 2 b 1 and large unit cell volumes of over 5500 Å 3 . The structures feature a framework of [CuTe 4 ] tetrahedra and [CuTe 3 ] trigonal pyramids with disorder in the Cu sites. The polyanionic frameworks have large square antiprism and cuboctahedral voids where Ba and alkali metal cations are situated, forming [BaTe 8 ] and [ATe 12 ], respectively. The overall compositions are close to being charge balanced. The large [ATe 12 ] cuboctahedra allowed for significant anisotropic displacement of the A cations, as observed from both single crystal X-ray diffraction and heat capacity studies. Alkali cations rattling together with Cu atom displacement and disorder leads to the dispersion of phonons, thus softening the lattice and subsequently reducing the thermal conductivity. Evaluations of the electronic band structure revealed the occurrence of a narrow bandgap together with the presence of a flat band near the valence band maximum, giving rise to the high thermopower. The Cs and Rb analogues show a slope change in the temperature dependence of electrical resistivity around room temperature, which is typical for semimetals or degenerate semiconductors. For the as-synthesized and unoptimized materials, high values of the thermoelectric figure-of-merit of ~0.2 were observed at 623 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effects of the Hydrophobic Block Length Ratio of Poly(vinylbenzyl N -methylpiperidinium carbonate)- b -polyethylene- b -poly(vinylbenzyl N -methylpiperidinium carbonate) Block Copolymers for Anion Exchange Membrane Electrolysis

Electrolysis of water to produce hydrogen from renewable electricity is an extremely attractive strategy to reduce energy dependence on fossil fuels. Development of membrane and ionomer materials that maintain high performance with long lifetimes is needed. We developed and investigated the performance and durability of a series of polyethylene-based ABA triblock copolymer anion exchange ionomer and membrane (AEI, AEM) materials for anion exchange membrane water electrolysis. Poly(vinylbenzyl N-methylpiperidinium carbonate)-b-polyethylene-b-poly(vinylbenzyl N-methylpiperidinium carbonate) was synthesized with different hydrophobic/hydrophilic block ratios (1.02:1, 2.58:1, and 4.46:1) resulting in a range of ion exchange capacities (1.1–1.8 meq g –1 ) and water swelling (23–154%) characteristics. All AEMs showed full anionic dissociation, as evidenced by linear Arrhenius correlations, and excellent carbonate conductivity of 8–94 mS cm –1 at 50 °C. Hydrophilic phase separation may offer superior chemical durability by only wetting the ion-conducting region of the polymer and avoiding attack at the nonwetted backbone. We evaluated the performance and durability of these AEMs as a function of hydrophobic polyethylene (PE) content. The AEM containing the least amount of PE displayed the highest performance of 1 A cm –2 at 2.3 V but degraded at 40 mV h –1 before catastrophically failing after <3 h at 0.5 A cm –2 . With greater PE-containing AEMs, the degradation rate was reduced by 3 orders of magnitude with only a 0.2 V increase in voltage. Constant current electrolysis for 50 h resulted in a voltage change of 0.3 mV h –1 in a single-cell water electrolyzer and 1 M potassium carbonate. In a 600 h test, the voltage change in the final 200 h was impressively low for an experimental film, 58 μV h –1 . Postmortem analysis indicated that the membrane did not thin and that water becomes more tightly hydrogen-bound in the polymer after electrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Effect of Temperature and Hydrophilic Ratio on the Structure of Poly( N -vinylcaprolactam)- block -poly(dimethylsiloxane)- block -poly( N -vinylcaprolactam) Polymersomes

Nanosized polymeric vesicles (polymersomes) assembled from ABA triblock copolymers of poly(N-vinylcaprolactam)-poly(dimethylsiloxane)-poly(N-vinylcaprolactam) (PVCL–PDMS–PVCL) are a promising platform for biomedical applications, as the temperature-responsiveness of the PVCL blocks enables reversible vesicle shrinkage and permeability of the polymersome shell at elevated temperatures. Herein, we explore the effects of molecular weight, polymer block weight ratios, and temperature on the structure of these polymersomes via electron microscopy, dynamic light scattering, small angle neutron scattering (SANS), and all-atom molecular dynamics methods. We show that the shell structure and overall size of the polymersome can be tuned by varying the hydrophilic (PVCL) weight fraction of the polymer: at room temperature, polymers of smaller hydrophilic ratios form larger vesicles that have thinner shells, whereas polymers with higher PVCL content exhibit interchain aggregation of PVCL blocks within the polymersome shell above 50 °C. Model fitting and model-free analysis of the SANS data reveals that increasing the mass ratio of PVCL to the total copolymer weight from 0.3 to 0.56 reduces the temperature-induced change in vesicle diameter by a factor of 3, while simultaneously increasing the change in shell thickness by a factor of 1.5. Finally, by analysis of the shell structures and overall size of polymersomes with various PVCL weight ratios and those without temperature-dependent polymer components, we bring into focus the mechanism of temperature-triggered drug release reported in a previous study. This work provides new fundamental perspectives on temperature-responsive polymersomes and elucidates important structure–property relationships of their constituent polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2023

All-Polyhydroxyalkanoate Triblock Copolymers via a Stereoselective-Chemocatalytic Route

Biodegradable polyhydroxyalkanoate (PHA) homopolymers and statistical copolymers are ubiquitous in microbially produced PHAs, but the step-growth polycondensation mechanism the biosynthesis operates on presents a challenge to access well-defined block copolymers (BCPs), especially higher-order tri-BCP PHAs. We report a stereoselective-chemocatalytic route to produce discrete hard–soft–hard ABA all-PHA tri-BCPs based on the living chain-growth ring-opening polymerization of racemic (rac) 8-membered diolides (rac-8DL R ; R denotes the two substituents on the ring). Depending on the composition of the soft B block, originated from rac-8DL R (R = Et, n Bu), and its ratio to the semicrystalline, high-melting hard A block, derived from rac-8DL Me , the resulting all-PHA tri-BCPs with high molar mass (M n up to 238 kg mol –1 ) and low dispersity (&#208: = 1.07) exhibit tunable mechanical properties characteristic of a strong and tough thermoplastic, elastomer, or a semicrystalline thermoplastic elastomer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Acrylic Triblock Copolymers Incorporating Isosorbide for Pressure Sensitive Adhesives

In this work, a new monomer acetylated acrylic isosorbide (AAI) was prepared in two steps using common reagents without the need for column chromatography. Free radical polymerization of AAI afforded poly(acetylated acrylic isosorbide) (PAAI), which exhibited a glass transition temperature ( T g ) = 95 °C and good thermal stability ( T d , 5% weight loss; N 2 = 331 °C, air = 291 °C). A series of ABA triblock copolymers with either poly( n -butyl acrylate) (PnBA) or poly(2-ethylhexyl acrylate) (PEHA) as the low T g midblocks and PAAI as the high T g end blocks were prepared using Reversible Addition–Fragmentation chain Transfer (RAFT) polymerization. The triblock copolymers ranging from 8–24 wt % PAAI were evaluated as pressure sensitive adhesives by 180° peel, loop tack, and static shear testing. While the PAAI-PEHA-PAAI series exhibited poor adhesive qualities, the PAAI-PnBA-PAAI series of triblock copolymers demonstrated peel forces up to 2.9 N cm –1 , tack forces up to 3.2 N cm –1 , and no shear failure up to 10 000 min. Dynamic mechanical analysis indicated that PAAI-PEHA-PAAI lacked the dissipative qualities needed to form an adhesive bond with the substrate, while the PAAI-PnBA-PAAI series exhibited a dynamic mechanical response consistent with related high performing PSAs.

2-Ethylhexyl acrylate↗
DOE OSTI2020

Large-area epitaxial growth of curvature-stabilized ABC trilayer graphene

The properties of van der Waals (vdW) materials often vary dramatically with the atomic stacking order between layers, but this order can be difficult to control. Trilayer graphene (TLG) stacks in either a semimetallic ABA or a semiconducting ABC configuration with a gate-tunable band gap, but the latter has only been produced by exfoliation. Here we present a chemical vapor deposition approach to TLG growth that yields greatly enhanced fraction and size of ABC domains. The key insight is that substrate curvature can stabilize ABC domains. Controllable ABC yields ~59% were achieved by tailoring substrate curvature levels. ABC fractions remained high after transfer to device substrates, as confirmed by transport measurements revealing the expected tunable ABC band gap. Substrate topography engineering provides a path to large-scale synthesis of epitaxial ABC-TLG and other vdW materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Increased water availability at various timescales has different effects on stomatal closure point in isohydric piñon pine and anisohydric juniper

Abstract Stomatal Closure Point (SCP) has commonly been used to describe drought response strategies in plants, with isohydric species maintaining relatively high, constant SCP compared to anisohydric species that can lower SCP with increasing drought severity. However, there is evidence that, within these groups, SCP may respond dynamically to environmental conditions. Here, we explored how increasing water availability affects SCP in classically isohydric piñon pine and anisohydric one-seed or Utah juniper at various spatial- (i.e., from branch, to tree, to ecosystem) and temporal- (i.e., hours to decades) scales. Our results show that short-term increases in water availability decreased SCP in isohydric piñon pine, making it more anisohydric, while short-term rehydration had no effect on SCP in anisohydric juniper. Increasing mean annual precipitation, on the other hand, increased SCP in both species. Our findings are consistent with documented differences in the use of ABA to control stomata in iso- and aniso-hydric species on short timescales, and with structural acclimation in both species at long timescales. These results illustrate that the local environment plays a large role in determining SCP.

Kraklow, Vachel↗
DOE OSTI2019

Quantum parity Hall effect in Bernal-stacked trilayer graphene

The quantum Hall effect has recently been generalized from transport of conserved charges to include transport of other approximately conserved-state variables, including spin and valley, via spin- or valley-polarized boundary states with different chiralities. In this paper, we report a class of quantum Hall effect in Bernal- or ABA-stacked trilayer graphene (TLG), the quantum parity Hall (QPH) effect, in which boundary channels are distinguished by even or odd parity under the system’s mirror reflection symmetry. At the charge neutrality point, the longitudinal conductance σ x x is first quantized to 4 e 2 / h at a small perpendicular magnetic field B ⊥ , establishing the presence of four edge channels. As B ⊥ increases, σ x x first decreases to 2 e 2 / h , indicating spin-polarized counterpropagating edge states, and then, to approximately zero. These behaviors arise from level crossings between even- and odd-parity bulk Landau levels driven by exchange interactions with the underlying Fermi sea, which favor an ordinary insulator ground state in the strong B ⊥ limit and a spin-polarized state at intermediate fields. The transitions between spin-polarized and -unpolarized states can be tuned by varying Zeeman energy. Our findings demonstrate a topological phase that is protected by a gate-controllable symmetry and sensitive to Coulomb interactions.

2D materials↗
DOE OSTI2024

Spontaneous emergence of straintronics effects and striped stacking domains in untwisted three-layer epitaxial graphene

Emergent electronic phenomena, from superconductivity to ferroelectricity, magnetism, and correlated many-body band gaps, have been observed in domains created by stacking and twisting atomic layers of Van der Waals materials. In graphene, emergent properties have been observed in ABC stacking domains obtained by exfoliation followed by expert mechanical twisting and alignment with the desired orientation, a process very challenging and nonscalable. Here, conductive atomic force microscopy shows in untwisted epitaxial graphene grown on SiC the surprising presence of striped domains with dissimilar conductance, a contrast that demonstrates the presence of ABA and ABC domains since it matches exactly the conductivity difference observed in ABA/ABC domains in twisted exfoliated graphene and calculated by density functional theory. The size and geometry of the stacking domains depend on the interplay between strain, solitons crossing, and shape of the three-layer regions. Interestingly, we demonstrate the growth of three-layer regions in which the ABA/ABC stacking domains self-organize in stable stripes of a few tens of nanometers. The growth-controlled production of isolated and stripe-shaped ABA/ABC domains open the path to fabricate quantum devices on these domains. These findings on self-assembly formation of ABA/ABC epitaxial graphene stripes on SiC without the need of time-consuming and nonscalable graphene exfoliation, alignment, and twisting provide different potential applications of graphene in electronic devices.

Rejhon, Martin (ORCID:000000017775487X)↗
DOE OSTI2021

Mirror symmetry breaking and lateral stacking shifts in twisted trilayer graphene

Here, we construct a continuum model of twisted trilayer graphene using ab initio density-functional-theory calculations, and we apply it to address twisted trilayer electronic structure. Our model accounts for moiré variation in site energies, hopping between outside layers, and hopping within layers. We focus on the role of a mirror symmetry present in ABA graphene trilayers with a middle layer twist. The mirror symmetry is lost intentionally when a displacement field is applied between layers, and unintentionally when the top layer is shifted laterally relative to the bottom layer. We calculate two band-structure characteristics that are directly relevant to transport measurements, namely the Drude weight and the weak-field Hall conductivity. We relate them via the Hall density to assess the influence of the accidental lateral stacking shifts currently present in all experimental devices on electronic properties. Finally, we comment on the role of the possible importance of accidental lateral stacking shifts for superconductivity in twisted trilayers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Substrate-Dependent Band Structures in Trilayer Graphene / h - BN Heterostructures

The tight-binding model has been spectacularly successful in elucidating the electronic and optical properties of a vast number of materials. Within the tight-binding model, the hopping parameters that determine much of the band structure are often taken as constants. Here, using ABA-stacked trilayer graphene as the model system, we show that, contrary to conventional wisdom, the hopping parameters and therefore band structures are not constants, but are systematically variable depending on their relative alignment angle between h-BN. Moreover, the addition or removal of the h-BN substrate results in an inversion of the K and K' valley in trilayer graphene’s lowest Landau level. Our work illustrates the oft-ignored and rather surprising impact of the substrates on band structures of 2D materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Increased adaxial stomatal density is associated with greater mesophyll surface area exposed to intercellular air spaces and mesophyll conductance in diverse C 4 grasses

Summary Mesophyll conductance ( g m ) is the diffusion of CO 2 from intercellular air spaces ( IAS ) to the first site of carboxylation in the mesophyll cells. In C 3 species, g m is influenced by diverse leaf structural and anatomical traits; however, little is known about traits affecting g m in C 4 species. To address this knowledge gap, we used online oxygen isotope discrimination measurements to estimate g m and microscopy techniques to measure leaf structural and anatomical traits potentially related to g m in 18 C 4 grasses. In this study, g m scaled positively with photosynthesis and intrinsic water‐use efficiency ( TE i ), but not with stomatal conductance. Also, g m was not determined by a single trait but was positively correlated with adaxial stomatal densities ( SD ada ), stomatal ratio ( SR ), mesophyll surface area exposed to IAS ( S mes ) and leaf thickness. However, g m was not related to abaxial stomatal densities ( SD aba ) and mesophyll cell wall thickness ( T CW ). Our study suggests that greater SD ada and SR increased g m by increasing S mes and creating additional parallel pathways for CO 2 diffusion inside mesophyll cells. Thus, SD ada , SR and S mes are important determinants of C 4 ‐ g m and could be the target traits selected or modified for achieving greater g m and TE i in C 4 species.

Pathare, Varsha S.↗
DOE OSTI2023

Ectomycorrhizal symbiosis prepares its host locally and systemically for abiotic cue signaling

Tree growth and survival are dependent on their ability to perceive signals, integrate them, and trigger timely and fitted molecular and growth responses. While ectomycorrhizal symbiosis is a predominant tree-microbe interaction in forest ecosystems, little is known about how and to what extent it helps trees cope with environmental changes. We hypothesized that the presence of Laccaria bicolor influences abiotic cue perception by Populus trichocarpa and the ensuing signaling cascade. We submitted ectomycorrhizal or non-ectomycorrhizal P. trichocarpa cuttings to short-term cessation of watering or ozone fumigation to focus on signaling networks before the onset of any physiological damage. Poplar gene expression, metabolite levels, and hormone levels were measured in several organs (roots, leaves, mycorrhizas) and integrated into networks. We discriminated the signal responses modified or maintained by ectomycorrhization. Ectomycorrhizas buffered hormonal changes in response to short-term environmental variations systemically prepared the root system for further fungal colonization and alleviated part of the root abscisic acid (ABA) signaling. Furthermore, the presence of ectomycorrhizas in the roots also modified the leaf multi-omics landscape and ozone responses, most likely through rewiring of the molecular drivers of photosynthesis and the calcium signaling pathway. In conclusion, P. trichocarpa-L. bicolor symbiosis results in a systemic remodeling of the host's signaling networks in response to abiotic changes. In addition, ectomycorrhizal, hormonal, metabolic, and transcriptomic blueprints are maintained in response to abiotic cues, suggesting that ectomycorrhizas are less responsive than non-mycorrhizal roots to abiotic challenges.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

AtDGCR14L contributes to salt-stress tolerance via regulating pre-mRNA splicing in Arabidopsis

In plants, the pre-mRNA alternative splicing has been demonstrated to be a crucial tier that regulates gene expression in response to salt stress. However, the underlying mechanisms remain elusive. Here, in this study, we studied the roles of DIGEORGE-SYNDROME CRITICAL REGION 14-like (AtDGCR14L) in regulating pre-mRNA splicing and salt stress tolerance. We discovered that Arabidopsis AtDGCR14L is required for maintaining plant salt stress tolerance and the constitutively spliced and active isoforms of important stress- and/or abscisic acid (ABA)-responsive genes. We also identified the interaction between AtDGCR14L and splicing factor U1-70k, which needs a highly conserved three amino acid (TWG) motif in DGCR14. Different from wild-type AtDGCR14L, the overexpression of TWG-substituted AtDGCR14L mutant did not change salt stress tolerance or pre-mRNA splicing of stress/ABA-responsive genes. Additionally, SWITCH3A (SWI3A) is a core subunit of the SWI/SUCROSE NONFERMENTING (SWI/SNF) chromatin-remodeling complexes. We found that SWI3A, whose splicing depends on AtDGCR14L, actively enhances salt stress tolerance. These results revealed that AtDGCR14L may play an essential role in crosstalk between plant salt-stress response and pre-mRNA splicing mechanisms. We also unveiled the potential role of SWI3A in controlling salt stress tolerance. The TWG motif in the intrinsically disordered region of AtDGCR14L is highly conserved and crucial for DGCR14 functions.

59 BASIC BIOLOGICAL SCIENCES↗