Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Revealing Insights into Li x FePO 4 Nanocrystals with Magnetic Order at Room Temperature Resulting in Trapping of Li Ions

A systematic report on the structures, magnetic properties, and electrochemical performance of Li x FePO 4 was carried out. Interestingly, it was discovered that the magnetic phase transition temperature is around 295 K in Li x FePO 4 (x ≤ 0.12) nanocrystals, which is higher than that of LiFePO 4 (T N = 51(1) K) and FePO 4 (TN = 114(1) K) phases. The origin of magnetic order around room temperature (RT) in LixFePO 4 (x ≤ 0.12) is proposed to be due to both Fe 2+ –Fe 3+ superexchange and the broken local symmetries induced by Fe 2+ –Li + antisite defects. Ab initio calculations were adopted to calculate the total energy change of the ferromagnetic state and antiferromagnetic state (ΔE) to qualitatively estimate T N and proved the existence of the magnetic order around room temperature. Due to the strong Lorentz force in RT magnetic domains, Li ions will be trapped and form sub-10 nm solid solution domains of Li 0+δ FePO 4 , which have a direct relationship with electrochemical performance during (de)lithiation procedures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogen occupancy in the RNi{sub 4}Mg (R=Y, La, Ce, and Nd) intermetallic compounds and hydrides

We have investigated the effect of hydrogen on the electronic strtucture of the RNi{sub 4}Mg (R=Y, La, Ce, Pr, and Nd) intermetallics. By means of a two-step approach, the projected plane-wave and linearized plane-waves methods, we studied the hydrogen-insertion energetics on the intermetallic matrix and the H-vacancy formation in the hydride compound. We found that particular interstitial sites in the intermetallics are suitable to allocate hydrogen and form a solid solution. The effect of these interstitials on the electronic structure is discussed. In the other hand, the hydrogen-occupied sites in the hydride are found to be energetically equivalent.

36 MATERIALS SCIENCE↗

Structure and Hardness of Ceramics Produced through High-Temperature Nitridation of Titanium Foil

We have studied the variation in the phase composition, elemental composition, and microstructure of rolled titanium samples during thermal annealing in a nitrogen atmosphere at 1300, 1500, 1700, and 2000°C. The results demonstrate that the nitridation process can yield compact titanium nitride-based ceramics or TiN/TiN{sub x}/α-Ti〈N〉 heterostructures. X-ray diffraction data for the near-surface region of the samples before and after nitridation and those for cross-sectional fracture surfaces of heterostructures are used to infer orientation relationships between the TiN phase and α-Ti〈N〉 solid solution. Scanning electron microscopy results for cross-sectional fracture surfaces indicate that complete nitridation of the samples leads to the formation of a three-layer microstructure.

36 MATERIALS SCIENCE↗

High-Temperature Properties and Microstructural Stability of the AISI H13 Hot-Work Tool Steel Processed by Selective Laser Melting

The microstructural stabilities, softening resistance, and high-temperature tensile properties of the H13 hot-work tool steel by selective laser melting (SLM) were systematically studied. A series of tempering procedures were performed on the as-SLMed specimens. Afterwards, the mechanism of softening resistance behavior was discussed based on the XRD, SEM, EBSD observations, hardness measurements, and high-temperature tensile tests. It was found that the as-SLMed H13 consisted of α-iron and γ-iron. The carbide-stabilizing elements aggregated as the cell-like substructures for the rapid solidification of the SLM process. After the softening resistance treatment, the retained austenite transformed to ferrite and carbide mixtures. The cell-like substructures dissolved slowly into the matrix when the temperature was below 550 °C. These factors increased the hardness and retarded the softening of the material. When the temperature was 600 °C, the microstructural constituents transformed to soft ferrite and globular carbides, which lead to a considerable decrease of the hardness. Due to the grain refinement, solid solution strengthening, and residual stress, the as-SLMed H13 exhibited better mechanical properties than that of the wrought counterparts.

36 MATERIALS SCIENCE↗

Microstructure and Phase Composition of Ni-Based Alloy Obtained by High-Speed Direct Laser Deposition

Phase composition and structural features of nickel-based alloy EP741 obtained by high-speed direct laser deposition were discussed in the paper. The technology of high-speed direct laser deposition has been successfully applied during the formation of samples with the various operating parameters of the experimental device. The laser power was between 450 and 1200 W, the scanning speed was 1.2 mm/s, the powder feed rate was 45 g/min, and the laser beam diameter was 1.2 mm. The structure and phase composition of the initial material and as-deposited samples were studied using optical and scanning electron microscopy, x-ray analysis and transmission electron microscopy. The investigation has shown that spherical particles of powder (EP741) can be used to form products by additive manufacturing with the presence of additional heat treatment, since almost all the as-deposited samples obtained do not contain cracks, and large volume of pores was observed only in the sample obtained with the power of 450 W. In addition, the phase composition of the as-deposited samples showed a high content of precipitating phase Ni{sub 3}(Al, Ti) in matrix, which is coherent to the solid solution based on nickel. In theory, the presence of Ni{sub 3}(Al, Ti) phase corresponds to the heat-treated nickel-base alloy obtained by standard methods of processing.

36 MATERIALS SCIENCE↗

Structural, Electrochemical and Hydrogen Sorption Studies of Nanocrystalline Ti-V-Co and Ti-V-Ni-Co Alloys Synthesized by Mechanical Alloying Method

In this paper, Ti-V-Co and Ti-V-Ni-Co alloys are considered as the hydrogen storage systems and the negative electrodes in Ni-MH{sub x} secondary batteries. This work shows results of studies that have been made on Ti{sub 0.5}V{sub 1.5−x}Co{sub x} and Ti{sub 0.5}V{sub 1.4−x}Ni{sub 0.1}Co{sub x} nanocrystalline alloys (x = 0, 0.1 0.2, 0.3) synthesized by the mechanical alloying technique. The goal of this study is to determine an effect of partial replacement of V by Co atoms on hydrogen storage and electrochemical properties of Ti-V and Ti-V-Ni alloys. X-ray diffraction studies have proven that 14 h of the ball milling has resulted in crystallization of body-centered-cubic solid solution. Studies performed on high-resolution transmission electron microscope confirm creation of nanocrystalline materials. Hydrogen sorption/desorption measurements that have been performed at 303 K show that Co accelerates the hydrogen sorption process, diminishes hysteresis and ameliorates the hydrogen storage reversibility. Properties of Ti-V-Co alloys, described in this work, originate mainly from structure of these materials. Electrochemical measurements of Ti-V-Co alloys have shown these materials poorly absorb hydrogen in 6 M KOH solution. Ti{sub 0.5}V{sub 1.4−x}Ni{sub 0.1}Co{sub x} alloys are characterized by better activation properties and improved cyclability in comparison to Co-free Ti{sub 0.5}V{sub 1.4}Ni{sub 0.1} alloy.

36 MATERIALS SCIENCE↗

In Situ X-ray Absorption and Diffraction Studies of Carbon Coated LiFe1/4Mn1/4Co1/4Ni1/4PO4 Cathode During First Charge

Synchrotron based in situ X-ray absorption spectroscopy (XAS) and X-ray diffraction (XRD) techniques are used to study electronic and crystal structure changes of the carbon coated LiFe1/4Mn1/4Co1/4Ni1/4PO4 (LiFe1/4Mn1/4Co1/4Ni1/4PO4/C) cathode material for Li-ion batteries during the first charge. In situ Fe, Mn, Co and Ni K-edge XAS results revealed that the three voltage plateaus at 3.6, 4.2 and 4.7 V vs. Li/Li+ are attributed to the redox reactions of Fe2+/Fe3+, Mn2+/Mn3+ and Co2+/Co3+, respectively, while the apparent capacities above 4.9 V is not originated from the Ni2+/Ni3+ redox, but very likely from the electrolyte decomposition. Interesting phase transition behaviors of LiFe1/4Mn1/4Co1/4Ni1/4PO4/C wereobserved with the formation of an intermediate phase and the solid solution regions. Combined in situ XAS and XRD techniques indicate fast electronic structural changes and slow bulk crystal structural changes.

36 MATERIALS SCIENCE↗

DENSITY-FUNCTIONAL STUDY OF Zr-BASED ACTINIDE ALLOYS: 2. U-Pu-Zr SYSTEM

Density-functional theory, previously used to describe phase equilibria in the U-Zr alloys [1], is applied to study ground state properties of the bcc U-Pu-Zr solid solutions. Calculated heats of formation of the Pu-U and Pu-Zr alloys are in a good agreement with CALPHAD assessments. We found that account for spin-orbit coupling is important for successful description of Pu-containing alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Ag addition on FePt L1{sub 0} ordering transition: A direct observation of ordering transition and Ag segregation in FePtAg alloy films

FePt and (FePt){sub 91.2}Ag{sub 8.8} alloy films were deposited by magnetron sputtering. The average coercivity of (FePt){sub 91.2}Ag{sub 8.8} films reaches 8.51 × 10{sup 5} A/m, which is 0.63 × 10{sup 5} A/m higher than that of the corresponding FePt films. Ag addition effectively promotes the FePt L1{sub 0} ordering transition at a relatively low annealing temperature of 400 °C. The promotion mechanism was investigated by using in situ high-resolution transmission electron microscopy (HRTEM) and ex situ X-ray absorption fine structure (XAFS). The concurrence of ordering transition and Ag segregation in FePtAg alloy films was first observed by using in situ heating HRTEM. The time-resolved evolution reveals more details on the role of Ag addition in FePt low-temperature ordering. Ex situ XAFS results further confirm that Ag replaces Fe sites in the as-deposited films and segregates from FePt-Ag solid solution phase through annealing at elevated temperatures. The segregation of Ag atoms leaves vacancies in the grain. The vacancy formation is believed to accelerate the diffusion of Fe and Pt atoms, which is critical for the L1{sub 0} ordering transition.

36 MATERIALS SCIENCE↗

High performance Gd{sup 3+} and Y{sup 3+} co-doped ceria-based electrolytes for intermediate temperature solid oxide fuel cells

Co-doped ceria of Ce{sub 1-x}Gd{sub x-y}Y{sub y}O{sub 2-0.5x}, wherein x = 0.15 and 0.2, 0 {<=} y {<=} x, were prepared by glycine-nitrate method. Their structures and ionic conductivities were characterized by X-ray diffraction (XRD) and AC impedance spectroscopy (IS). All the electrolytes were found to be ceria-based solid solutions of fluorite type structures. Co-doping was found to effectively enhance the conductivity. In comparison to the singly doped ceria, the co-doped ceria showed much higher ionic conductivities at 673-973 K. At 773 K, the ionic conductivity of Ce{sub 0.8}Gd{sub 0.05}Y{sub 0.15}O{sub 1.9} is 0.013 S cm{sup -1} which is three times as high as that of Ce{sub 0.8}Gd{sub 0.2}O{sub 1.9}. These Gd{sup 3+}and Y{sup 3+} co-doped ceria are ideal electrolyte materials of intermediate temperature solid oxide fuel cells (SOFCs)

36 MATERIALS SCIENCE↗

Mechanism of the α-to-β phase transformation in the LaNi 5 -H 2 system

High-energy synchrotron in situ X-ray powder diffraction has been used to elucidate the mechanism of the hydriding phase transformation in a LaNi 5 model hydrogen storage intermetallic in real time. The transformation proceeds at 10 ºC via the transient growth of an interfacial phase, the {gamma} phase, with lattice parameters intermediate between those of the α (dilute solid solution) and β (concentrated hydride) phases. The γ phase forms to partially accommodate the 24% change in unit cell volume between the α and β phases during hydriding and dehydriding. The α, γ and β phases coexist at the nanoscopic level.

08 HYDROGEN↗

Enhancement In Charge Carrier Mobility Under Transition To Heavy Doping

New experimental data confirming our suggestion about the universal character of critical phenomena accompanying the transition from 'an impurity gas' to 'an impurity condensate' with impurity concentration increasing are presented. The existence of the range of anomalous growth in the charge carrier mobility under transition to heavy doping is established for PbTe-PbSe solid solutions. The experimental results are analyzed on the basis of percolation theory taking into account alloy scattering and spatial correlations of impurity centers.

36 MATERIALS SCIENCE↗

Ag-Pt alloy nanoparticles with the compositions in the miscibility gap

Silver platinum binary alloys with compositions between about Ag{sub 2}Pt{sub 98} and Ag{sub 95}Pt{sub 5} at <{approx} 400 deg. C have largely not been observed in bulk due to the large immiscibility between these two metals. We present in this paper that Ag-Pt alloy nanostructures can be made in a broad composition range. The formation of Ag-Pt nanostructures is studied by powder X-ray diffraction (PXRD) and energy-dispersive X-ray (EDX). Our results indicate that lattice parameter changes almost linearly with composition in these Ag-Pt nanomaterials. In another word, lattice parameter and composition relationship follows the Vegard's law, which is a strong indication for the formation of metal alloys. Our transmission electron microscopy (TEM) study shows that the silver-rich Ag-Pt alloy nanostructures have spherical shape, while the platinum-rich ones possess wire-like morphology. The stability and crystal phase are investigated by annealing the alloy nanostructures directly or on carbon supports. - Graphical abstract: While platinum and silver cannot form a solid solution with the composition between about Ag{sub 2}Pt{sub 98} and Ag{sub 95}Pt{sub 5} at 400 deg. C or below in bulk form, alloy particles and wires can be made within this miscibility gap at the nanometer scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Syntheses, crystal structures and Si solubilities of new layered carbides Zr{sub 2}Al{sub 4}C{sub 5} and Zr{sub 3}Al{sub 4}C{sub 6}

Two types of new ternary carbides, Zr{sub 2}Al{sub 4}C{sub 5} and Zr{sub 3}Al{sub 4}C{sub 6}, have been synthesized and characterized by X-ray powder diffraction. The crystal structures were refined from laboratory X-ray powder diffraction data (CuK{alpha}{sub 1}) using the Rietveld method. These carbides form a homologous series with the general formula (ZrC){sub m}Al{sub 4}C{sub 3} (m=2 and 3). The crystal structures can be regarded as intergrowth structures where the Al{sub 4}C{sub 3}-type [Al{sub 4}C{sub 4}] layers are the same, while the NaCl-type [Zr{sub m}C{sub m+1}] layers increase in thickness with increasing m value. The new carbides are most probably the end members of continuous solid-solutions (ZrC){sub m}[Al{sub 4-x}Si{sub x}]C{sub 3} with 0{<=}x{<=}0.44. - Graphical abstract: Crystal structures of new layered carbides (ZrC){sub 2}Al{sub 4}C{sub 3} and (ZrC){sub 3}Al{sub 4}C{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SYNTHESIS AND CHARACTERIZATION OF PROTON CONDUCTORS

The morphological and electrical properties of yttrium (Y) and indium (In) doped barium cerate perovskites of the form BaIn{sub 0.3-x}Y{sub x}Ce{sub 0.7}O{sub 3-{delta}} (with x=0-0.3) prepared by a modified Pechini method were investigated as potential high temperature proton conductors with improved chemical stability. The sinterability increased with the increase of In-doping, and the perovskite phase was found in the BaIn{sub 0.3-x}Y{sub x}Ce{sub 0.7}O{sub 3-{delta}} solid solutions over the range 0 {le} x {le} 0.3. The conductivities decreased (from x to x, insert quantitative values) while the tolerance to wet CO{sub 2} improved for BaIn{sub 0.3-x}Y{sub x}Ce{sub 0.7}O{sub 3-{delta}} samples with an increase of In-doping.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Pronounced matrix effect in YbMo{sub 2}Al{sub 4}-type Ca(Au{sub x}Zn{sub 2−x})Au{sub 4} (x=0.09–0.89)

Electron-poor polar intermetallics Ca(Au{sub x}Zn{sub 2−x})Au{sub 4} have been synthesized through fusion of stoichiometric metals in sealed tantalum tubes at 800 °C and annealing at 400 °C for one week. Single crystal X-ray diffraction analyses reveal that this phase belongs to the YbMo{sub 2}Al{sub 4}-type structure (I4/mmm, Pearson symbol tI14), a≈6.943–7.017 Å, c≈5.278–5.286 Å, Z=2, with homogeneous composition range of x=0.09(1)–0.89(1). The structure exhibits a three-dimensional framework of (Au{sub 8}){sub 1/2} featuring square and octagonal channels extending in c, in which Ca and the infinite linear chains of [(Au,Zn){sub 2}]{sub 1/2} are located, respectively. Mulliken population analyses demonstrate that Zn prefers to form the linear chains in the whole homogeneous composition range, consistent with experimental observations. Crystal orbital Hamilton population (COHP) analyses reveal that the channel-to-chain Au–Zn contact has strong bonding interactions regardless of its large interatomic distance (∼2.85 Å), a signature of pronounced matrix effect. The last mentioned effect in YbMo{sub 2}Al{sub 4}-type structures is expected in case the linear chains are defined by small size atoms. - Graphical abstract: Pronounced matrix effect incurred by Au–Au bonding within the gold substructure in Ca(Au{sub x}Zn{sub 2−x})Au{sub 4} results in an elongation of the channel-to-chain Au–Zn interatomic distance without weakening bonding interactions. - Highlights: • The complete solid solution of Ca(Au{sub x}Zn{sub 2−x})Au{sub 4} was accomplished. • Site preference was explained by “coloring” analyses. • Abnormally large Au–Zn distance but with strong bonding was observed. • Pronounced matrix effect incurred by Au–Au bonding in gold substructure was found.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photocatalytic hydrogen production by water splitting using novel catalysts under UV-vis light irradiation

In this work, photocatalytic hydrogen generation by water splitting (H 2 O (l) →H 2 (g) +1/2O 2 (g) ) has been studied on photocatalysts based on Zn, Cd, Fe and Cu, synthesized by coprecipitation. Iron and copper nanoparticles were incorporated as cocatalysts to enhance the photocatalytic activity of the ZnCd solid solution. The effect of the different synthesis parameters (temperature, elemental atomic ratios, amount of Cu and Fe incorporated in the catalyst and calcination temperature) on the photocatalytic production of hydrogen has been studied in order to determine the best experimental synthesis conditions. The catalysts have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and BET. The experiments of photocatalytic water splitting were performed in aqueous solution of the photocatalysts previously dispersed in a soft ultrasound bath. The photocatalysts were irradiated under different lights ranging from 220 to 700 nm. Furthermore, the photocatalytic activity was found to be clearly dependent on the specific area of the photocatalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Barothermal Processing on the Solid-State Formation of the Structure and Properties of 16 at % Si–Al Hypereutectic Alloy

We describe barothermal processing (hot isostatic pressing) of a 16 at % Si–Al binary alloy for 3 h at a temperature of 560°C and pressure of 100 MPa for 3 h, in combination with measurements of heat effects during cooling. The results demonstrate that this processing leads to the fragmentation of the silicon structural constituent and ensures a high degree of homogenization of the as-prepared alloy. Heat treatment of the 16 at % Si–Al alloy at 560°C and a pressure of 100 MPa leads to a thermodynamically driven enhanced silicon dissolution, up to ~10 at %, in the aluminum matrix, resulting in the formation of a supersaturated solid solution, which subsequently decomposes during cooling. We analyze the complete porosity elimination process, which makes it possible to obtain a material with 100% relative density. According to differential barothermal analysis, microstructural analysis, and scanning and transmission electron microscopy data, barothermal processing of the 16 at % Si–Al alloy produces a bimodal size distribution of the silicon phase constituent: microparticles 3.6 μm in average size and nanoparticles down to ~1 nm in diameter. The Al matrix has been shown to contain a high density of edge dislocations. Barothermal processing reduces the thermal expansion coefficient and microhardness of the hypereutectic alloy. We conclude that solid-state barothermal processing is an effective tool for completely eliminating microporosity from the 16 at % Si–Al alloy, reaching a high degree of homogenization, and controlling the microstructure of the alloy, in particular by producing high dislocation density in the aluminum matrix.

36 MATERIALS SCIENCE↗