Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shear flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Performance of LI-1542 reusable surface insulation system in a hypersonic stream

The thermal and structural performance LI-1542 reusable surface insulation (RSI) tiles was investigated. The test panel was designed to represent part of the surface structure on a space shuttle orbiter fuselage along a 1250 K isotherm. Aerothermal tests were conducted at a free-stream Mach number of 6.6, a total temperature of 1820 K, Reynolds numbers of 2 millon and 5 million per meter, and dynamic pressures of 26 and 65 kPa. The RSI tiles demonstrated good thermal protection and structural integrity. High temperatures were caused by misalinement in tile height, offset the tile longitudinal alinement, and leakage around thermal seals when differential pressure existed across the panel. The damage tolerance of LI-1542 RSI appeared high. The tile coating crazed early in the test program, but this did not effect the tile integrity. Erosion of the tile edges occurred at forward-facing steps and at the ends of longitudinal gaps because of particle impacts and flow shear.

Hunt, L. R.↗

Performance of a mullite reusable surface insulation system in a hypersonic stream

The thermal and structural performance of a large panel of mullite reusable surface insulation (RSI) tiles was determined by a series of aerothermal tests in the Langley 8-foot high-temperature structures tunnel. The test panel was designed to represent a portion of the surface structure on a space shuttle orbiter fuselage along a 1,150 K isotherm with the mullite tile system bonded directly to the primary structure. Aerothermal tests were conducted at a free-stream Mach number of 6.7, a total temperature of 1,880 K, a unit Reynolds number of 4.6 million per meter, and dynamic pressure of 62 kPa. The thermal response of the mullite tile was as predicted, and the bond-line temperature did not exceed the design level of 570 K during a typical entry-heat cycle. Geometric irregularities of the tile gaps affected the tile edge temperatures when exposed to hypersonic flow. The tile coating demonstrated good toughness to particle impacts, but the coating cracked and flaked with thermal cycles. The gap filler of woven silica fibers appeared to hinder flow penetration into the gaps and withstood the flow shear of the present tests.

Hunt, L. R.↗

A complete model of turbulence

A set of constitutive equations suitable for a priori computation of turbulent shear flows has been developed. Since no properties of a given turbulent flow need be known in advance in order to obtain a solution, the equations comprise a complete model of turbulence. Perturbation analysis shows that the model predicts a composite five-layer structure for an incompressible turbulent boundary layer, viz, a defect layer, a law-of-the-wall layer, a viscous sublayer, a near-surface roughness layer, and a viscous superlayer at the boundary-layer edge. Analysis of the defect layer demonstrates the key improvement of the model over its predecessor, the Saffman-Wilcox two-equation model of turbulence. Examination of model-predicted sublayer structure yields model-parameter boundary conditions appropriate for surfaces with roughness and mass injection. Results of numerical computations of compressible and incompressible equilibrium boundary layers show that, for such flows, the model is as accurate as mixing-length theory. Applications to transitional boundary layers and to nonequilibrium relaxation of a boundary layer passing from a rough to a smooth surface indicate that the model's applicability extends far beyond that of mixing-length theory's.

Wilcox, D. C.↗

Theory of two-point correlations of jet noise

A large body of careful experimental measurements of two-point correlations of far field jet noise was carried out. The model of jet-noise generation is an approximate version of an earlier work of Ribner, based on the foundations of Lighthill. The model incorporates isotropic turbulence superimposed on a specified mean shear flow, with assumed space-time velocity correlations, but with source convection neglected. The particular vehicle is the Proudman format, and the previous work (mean-square pressure) is extended to display the two-point space-time correlations of pressure. The shape of polar plots of correlation is found to derive from two main factors: (1) the noncompactness of the source region, which allows differences in travel times to the two microphones - the dominant effect; (2) the directivities of the constituent quadrupoles - a weak effect. The noncompactness effect causes the directional lobes in a polar plot to have pointed tips (cusps) and to be especially narrow in the plane of the jet axis. In these respects, and in the quantitative shapes of the normalized correlation curves, results of the theory show generally good agreement with Maestrello's experimental measurements.

Ribner, H. S.↗

Measurements in the mixing region of a turbulent jet in a coflowing airstream

The mixing region of a turbulent jet is an important example of an intermittent turbulent shear flow. There are a great deal of interest in this region because of interest in jet noise and STOL aircraft which use upper surface blowing or externally blown flap configurations to increase lift. A detailed study of the one point statistical properties of a smoke laden jet was made using a combination of a laser velocimeter and a light scattering system. The jet, with a 14 to 1 contraction, was placed inside a wind tunnel where the ratio of the jet exit velocity to free stream was 5.1 to 1. All measurements are made for a jet Reynolds number of 22,600. Among the quantities measured are mean axial and radial velocities, axial and radial intensities, power spectra, mean smoke concentration, concentration intensities, concentration spectra, intermittencies and velocity-concentration correlations. The results are compared with hot-wire data where available.

Morton, J. B.↗

Aspects of turbulent combustion

A complete second-order closure program for the investigation of chemically reacting turbulent flowfields is being developed. Many of the turbulence models being used have been developed and tested during previous studies of a variety of incompressible and compressible shear flows. A number of additional scalar correlations have to be modeled for chemically reacting flows, and a 'typical eddy' model has been developed for the joint probability density function for all the scalars. A simpler model in which higher-order scalar correlations are set zero is also being used. The program has been recently extended to multi-species, multi-step chemical reactions. Computations have been performed using the second-order closure program to study the turbulence-chemistry interaction in DF chemical laser flows and in a hydrogen-air diffusion flame. The results demonstrate the importance of the inclusion of the concentration and temperature fluctuation correlations in turbulent reacting flows.

Varma, A. K.↗

A second-order closure analysis of turbulent diffusion flames

A complete second-order closure computer program for the investigation of compressible, turbulent, reacting shear layers was developed. The equations for the means and the second order correlations were derived from the time-averaged Navier-Stokes equations and contain third order and higher order correlations, which have to be modeled in terms of the lower-order correlations to close the system of equations. In addition to fluid mechanical turbulence models and parameters used in previous studies of a variety of incompressible and compressible shear flows, a number of additional scalar correlations were modeled for chemically reacting flows, and a typical eddy model developed for the joint probability density function for all the scalars. The program which is capable of handling multi-species, multistep chemical reactions, was used to calculate nonreacting and reacting flows in a hydrogen-air diffusion flame.

Varma, A. K.↗

Turbulence processes and simple closure schemes

The problem of closure in turbulence in the case of two-point correlations resides in the existence of two unknowns E and W, the energy spectrum function and the transfer function, respectively, in the spectrum equation. In the case of weak turbulence, W is negligible. In case of higher correlations, closure can be effective by neglecting the inertia term in the highest order term used. Specifying a certain number of spectra at an initial time is also a way of getting around the closure problem. A simple case of turbulent shear flow is then considered, where two-point correlation equations are used and the velocity is broken into mean and fluctuating components. This yields a differential equation for the energy spectrum, the three terms of which are the energy spectrum, production term and dissipation term. They are plotted for a particular time. Similar analyses and comparisons with experiment are made for pipe and boundary layer flows.

Deissler, R. G.↗

Prediction of nearfield jet entrainment by an interactive mixing/afterburning model

The development of a computational model (BOAT) for calculating nearfield jet entrainment, and its application to the prediction of nozzle boattail pressures, is discussed. BOAT accounts for the detailed turbulence and thermochemical processes occurring in the nearfield shear layers of jet engine (and rocket) exhaust plumes while interfacing with the inviscid exhaust and external flowfield regions in an overlaid, interactive manner. The ability of the model to analyze simple free shear flows is assessed by detailed comparisons with fundamental laboratory data. The overlaid methodology and the entrainment correction employed to yield the effective plume boundary conditions are assessed via application of BOAT in conjunction with the codes comprising the NASA/LRC patched viscous/inviscid model for determining nozzle boattail drag for subsonic/transonic external flows. Comparisons between the predictions and data on underexpanded laboratory cold air jets are presented.

Dash, S. M.↗

A comparative study of tropospheric ground cloud diffusion models

Calculated values obtained from several diffusion models are compared with field measurements. The diffusion models that are examined include: NASA/MSFC multilayer diffusion models, the meteorological effluent transport simulation model, the TREATS model, the atmsopheric diffusion particle in cell model, and a model for diffusion in shear flow (DISF). The atmospheric turbulence in the PBL turbulent wind field above and below 150 m is calculated. Concentrations calculated from the DISF model are found to correlate, in general, quite well with flight measurements.

Hwang, B.↗

A computational model for the prediction of jet entrainment in the vicinity of nozzle boattails (the BOAT code)

The development of a computational model (BOAT) for calculating nearfield jet entrainment, and its incorporation in an existing methodology for the prediction of nozzle boattail pressures, is discussed. The model accounts for the detailed turbulence and thermochemical processes occurring in the mixing layer formed between a jet exhaust and surrounding external stream while interfacing with the inviscid exhaust and external flowfield regions in an overlaid, interactive manner. The ability of the BOAT model to analyze simple free shear flows is assessed by comparisons with fundamental laboratory data. The overlaid procedure for incorporating variable pressures into BOAT and the entrainment correction employed to yield an effective plume boundary for the inviscid external flow are demonstrated. This is accomplished via application of BOAT in conjunction with the codes comprising the NASA/LRC patched viscous/inviscid methodology for determining nozzle boattail drag for subsonic/transonic external flows.

Dash, S. M.↗

Sound production due to large-scale coherent structures

The acoustic pressure fluctuations due to large-scale finite amplitude disturbances in a free turbulent shear flow are calculated. The flow is decomposed into three component scales; the mean motion, the large-scale wave-like disturbance, and the small-scale random turbulence. The effect of the large-scale structure on the flow is isolated by applying both a spatial and phase average on the governing differential equations and by initially taking the small-scale turbulence to be in energetic equilibrium with the mean flow. The subsequent temporal evolution of the flow is computed from global energetic rate equations for the different component scales. Lighthill's theory is then applied to the region with the flowfield as the source and an observer located outside the flowfield in a region of uniform velocity. Since the time history of all flow variables is known, a minimum of simplifying assumptions for the Lighthill stress tensor is required, including no far-field approximations. A phase average is used to isolate the pressure fluctuations due to the large-scale structure, and also to isolate the dynamic process responsible. Variation of mean square pressure with distance from the source is computed to determine the acoustic far-field location and decay rate, and, in addition, spectra at various acoustic field locations are computed and analyzed. Also included are the effects of varying the growth and decay of the large-scale disturbance on the sound produced.

Gatski, T. B.↗

Transverse vorticity measurements

A technique, involving programmed digital calculations, is proposed for evaluating transverse vorticity in typical laboratory shear flows from an array of four hot-wire probes. The computing scheme successfully recovers the velocity vector information from a wide range of velocity magnitudes and a wide range of pitch angles. It is readily implemented in a batch process mode on a digital computer.

Foss, J. F.↗

Reynolds stress closures: Status and prospects

The basic pattern of Reynolds closures and the reason they look as an attractive type of model for practical shear flow calculations is summarized. The relationship between the organized structures and Reynolds stress closures is discussed. An outline given of fundamental developments that are being introduced to extend the modest reliability of Reynolds stress closures.

Launder, B. E.↗

Separated skin-friction measurements - Source of error: An assessment and elimination

Potential sources of error in the use of heated surface gages for separated-skin-friction measurement are studied. Emphasis is placed on the interpretation of local skin-friction measurements in two- and three-dimensional separated turbulent-shear flows before they are used to test the validity of current and proposed computer codes.

Owen, F. K.↗

Multiple-time-scale concepts in turbulent transport modelling

The paper reports progress in developing a closure employing two or more independently calculated time scales with which to characterize the rates of progress of different turbulent interactions. The approach contrasts with that used by earlier single-point models which adopt just a single time scale, proportional to the turbulence energy turnover time. The present treatment divides the energy containing part of the spectrum into two regions which respond at different rates and in different ways to changes in the environment. Computational results are reported for several thin shear flows which show striking improvement in the level of agreement with experiment over that obtained with models employing only one time scale.

Hanjalic, K.↗

Free-stream disturbance, continuous Eigenfunctions, boundary-layer instability and transition

A rational foundation is presented for the application of the linear shear flows to transition prediction, and an explicit method is given for carrying out the necessary calculations. The expansions used are shown to be complete. Sample calculations show that a typical boundary layer is very sensitive to vorticity disturbances in the inner boundary layer, near the critical layer. Vorticity disturbances three or four boundary layer thicknesses above the boundary are nearly uncoupled from the boundary layer in that the amplitudes of the discrete Tollmien-Schlicting waves are an extremely small fraction of the amplitude of the disturbance.

Grosch, C. E.↗

Free-stream disturbances, continuous eigenfunctions, boundary-layer instability and transition

A rational foundation is provided for the application of the linear stability theory of parallel shear flows to transition prediction. An explicit method is given for carrying out the necessary calculations. The expansions are shown to be complete. Sample calculations show that a typical boundary layer is very sensitive to vorticity disturbance in the inner boundary layer near the critical layer. Vorticity disturbances three or four boundary layer thicknesses above the boundary are nearly uncoupled from the boundary layer, in that the amplitudes of the discrete Tollmein-Schlichting waves are an extremely small fraction of the amplitude of the disturbance.

Salwen, H.↗