Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mean”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Convective heating measurement by means of an infrared camera

The development of rapid and accurate wind tunnel techniques to measure convective heating distributions in complex reentry configurations is discussed. Major emphasis was put on the infrared camera technique. Its essence is the measurement of infrared emission from the surface of a wind tunnel model as a function of time. Prior calibration of the infrared camera relates the emission to the surface temperature of the model. The time history of the surface temperature can then be related to the heating rate by standard techniques. The output of the camera is an electrical signal that is tape-recorded in analog form, then digitized and processed by computer, so that automated and relatively rapid data reduction can be accomplished. In addition, the camera produces real-time visual displays of the infrared emission as pictures on an oscilloscope screen. These pictures give immediate indications of hot and cool spots on the model.

Compton, D. L.↗
NASA NTRS1972

Upper-stage space shuttle propulsion by means of separate scramjet and rocket engines

A preliminary mission study of a reusable vehicle from staging to orbit indicates payload advantages for a dual-propulsion system consisting of separate scramjet and rocket engines. In the analysis the scramjet operated continuously and the initiation of rocket operation was varied. For a stage weight of 500,000 lb the payload was 10.4 percent of stage weight or 70 percent greater than that of a comparable all-rocket-powered stage. When compared with a reusable two-state rocket vehicle having 50,000 lb payload, the use of the dual propulsion system for the second stage resulted in significant decreases in lift-off weight and empty weight, indicating possible lower hardware costs.

Franciscus, L. C.↗
NASA NTRS1972

Change in transmittance of fused silica as a means of detecting material sputtered from components on a 5-cm ion thruster

Two endurance tests of a 5-cm mercury bombardment thruster are reported. Both tests used a translational screen-grid system with the beam vectored 10 degrees. The first test lasted 141 hours and the second test operated for 2026 hours. In each test two fused silica samples (solar cell covers), 2.0 cm by 2.1 cm, were placed in shielded holders to detect materials sputtered from the thruster. Spectral optical properties between 0.398 and 2.16 microns were measured on each sample, both before and after the endurance tests. The deposition on each sample was spectrographically analyzed to determine the type of materials sputtered from the thruster. It was found that sputtering from the neutralizer is highly dependent on its position with respect to the beam edge. The sputtering from the accelerator grid of the translational screen-grid system of the 2026 hour test was sufficient to form an opaque film on the sample located in the direction opposite to the vectored beam.

Weigand, A. J.↗
NASA NTRS1972

Investigation of low-Z Coster-Kronig transitions by means of Auger and photoelectron spectroscopy

Experimental intensity ratios of Auger transitions for Co, Ni, Cu, and Zn as well as the relative L sub 2 and L sub 3 level widths of Cu and Zn, derived from their photoelectron spectra, are presented. Evidence is presented that a great deal of vacancy reorganization took place following photoionization and prior to Auger emission. These reorganizations are assumed to be due to Coster-Kronig transitions f sub 23. These results are compared with theoretical calculations and agree with predicted discontinuity at Z = 30 where f sub 23 transitions become energetically impossible.

Yin, L. I.↗
NASA NTRS1972

Emission of sound from axisymmetric turbulence convected by a mean flow with application to jet noise

A model, based on Lighthill's theory, for predicting aerodynamic noise from a turbulent shear flow is developed. This model is a generalization of the one developed by Ribner. Unlike Ribner's model, it does not require that the turbulent correlations factor into space and time-dependent parts. It replaces his assumption of isotropic. turbulence by the more realistic one of axisymmetric turbulence. The implications of the model for jet noise are discussed.

Goldstein, M. E.↗
NASA NTRS1971

The estimation of the constituent densities of the upper atmosphere by means of a recursive filtering algorithm.

The structure of the upper atmosphere can be indirectly probed by light in order to determine the global density structure of ozone, aerosols, and neutral atmosphere. Scattered and directly transmitted light is measured by a satellite and is shown to be a nonlinear function of the state which is defined to be a point-wise decomposition of the density profiles. Dynamics are imposed on the state vector and a structured estimation problem is developed. The estimation of these densities is then performed using a linearized Kalman-Bucy filter and a linearized Kushner-Stratonovich filter.

Mcgarty, T. P.↗
NASA NTRS1972

The mean photospheric magnetic field from solar magnetograms Comparisons with the interplanetary magnetic field.

Large-scale averages of daily solar magnetograms have been compared by cross-correlation with the interplanetary magnetic sector pattern during a 2.5 yr interval. A significant correlation was found at a lag of about 4.5 days, with the amplitude of the correlation depending on the area included in the magnetogram averages. The highest correlation was found when an area of one quarter of the solar disk was used, which is consistent with the idea that the photospheric features which are to be associated with the interplanetary sector pattern are large scale features.

Scherrer, P. H.↗
NASA NTRS1972

Early-type stars and the mean-square electron density in the galactic disk.

An assessment is made of the total supply of ionizing photons from hot stars, within several hundred parsecs of the sun. The resulting photoionized H II regions probably contribute an average emission measure of the order of 5 pc per cm to the 6th power, through the galactic disk; this is smaller than other recent estimates.

Richstone, D. O.↗
NASA NTRS1974

Means for mapping radiated fields and for measuring differential movement of antenna elements

Null seeking system uses two transponders located at selected points on dish to detect phase-front of received signal. One signal line has continuously variable phase shifter driven by reversible stepmotor. Each of two transponders on dish is a dipole with mixer crystal between elements. Crystal is driven, in turn, by 181.6MHz signal carried by miniature coaxial cable.

Lundy, C. C.↗
NASA NTRS1972

Measured and calculated mean flow properties of a two-dimensional, hypersonic, turbulent wake

The hypersonic turbulent wake produced by a wedge was studied experimentally and its properties were compared with predictions obtained from a numerical computation procedure. In the computation procedure several models for the eddy viscosity formulation of the turbulent transport were examined. Conventional-defect models and a modified mixing-length model were found to yield good predictions of the experimental data. The classical mixing-length model gave unrealistic results. The experimental data displayed similarity when velocity and temperature defects were scaled by the maximum defects and the transverse coordinate was scaled by the velocity-defect half-width.

Wagner, R. D.↗
NASA NTRS1972

Improvement of a geodetic triangulation through control points established by means of satellite or precision traversing

Whether any significant increment to accuracy could be transferred from a super-control continental net (continental satellite net or super-transcontinental traverse) to the fundamental geodetic net (first-order triangulation) is discussed. This objective was accomplished by evaluating the positional accuracy improvement for a triangulation station, which is near the middle of the investigated geodetic triangulation net, by using various station constraints over its geodetic position. This investigation on a 1858 kilometer long triangulation chain shows that the super-control net can provide a useful constraint to the investigated geodetic triangulation net, and thus can improve it only when the accuracy of super-control net is at least 1 part in 500,000.

Saxena, N. K.↗
NASA NTRS1972

Multimaterial lamination as a means of retarding penetration and spallation failures in plates

Experimental data are presented which show that hypervelocity impact spallation and penetration failures of a single solid aluminum plate and of a solid aluminum plate spaced a distance behind a Whipple meteor bumper may be retarded by replacing the solid aluminum plate with a laminated plate. Four sets of experiments were conducted. The first set of experiments was conducted with projectile mass and velocity held constant and with polycarbonate cylinders impacted into single plates of different construction. The second set of experiments was done with single plates of various construction and aluminum spherical projectiles of similar mass but different velocities. These two experiments showed that a laminated plate of aluminum and polycarbonate or aluminum and methyl methacrylate could prevent spallation and penetration failures with a lower areal density than either an all-aluminum laminated plate or a solid aluminum plate. The aluminum laminated plate was in turn superior to the solid aluminum plate in resisting spallation and penetration failures. In addition, through an example of 6061-T6 aluminum and methyl methacrylate, it is shown that a laminated structure ballistically superior to its parent materials may be built. The last two sets of experiments were conducted using bumper-protected main walls of solid aluminum and of laminated aluminum and polycarbonate. Again, under hypervelocity impact conditions, the laminated main walls were superior to the solid aluminum main walls in retarding spallation and penetration failures.

Dibattista, J. D.↗
NASA NTRS1972

A study of the variable impedance surface concept as a means for reducing noise from jet interaction with deployed lift-augmenting flaps

The feasibility of quieting the externally-blown-flap (EBF) noise sources which are due to interaction of jet exhaust flow with deployed flaps was demonstrated on a 1/15-scale 3-flap EBF model. Sound field characteristics were measured and noise reduction fundamentals were reviewed in terms of source models. Test of the 1/15-scale model showed broadband noise reductions of up to 20 dB resulting from combination of variable impedance flap treatment and mesh grids placed in the jet flow upstream of the flaps. Steady-state lift, drag, and pitching moment were measured with and without noise reduction treatment.

Hayden, R. E.↗
NASA NTRS1973

Effect of a reduction in blade thickness on performance of a single stage 20.32 centimeter mean diameter turbine

As part of a program to reduce the manufacturing costs of a small gas-turbine engine, the turbine blading was reduced in thickness to facilitate coining. Tests were made to determine the effect of this modification on turbine performance. The working fluid was air at nominal inlet total conditions of 535 deg F and 20.0 psia. Performance results are presented and compared for four stator-rotor combinations in terms of equivalent torque, mass flow, and efficiency at equivalent design speed and at inlet-total to exit-static pressure ratios of 1.8 to 3.8

Nusbaum, W. J.↗
NASA NTRS1972

In-flight angular alignment of inertial navigation systems by means of radio aids

The principles involved in the angular alignment of the inertial reference by nondirectional data from radio aids are developed and compared with conventional methods of alignment such as gyro-compassing and pendulous vertical determination. The specific problem is considered of the space shuttle reentry and a proposed technique for the alignment of the inertial reference system some time before landing. A description is given of the digital simulation of a transponder interrogation system and of its interaction with the inertial navigation system. Data from reentry simulations are used to demonstrate the effectiveness of in-flight inertial system alignment. Concluding remarks refer to other potential applications such as space shuttle orbit insertion and air navigation of conventional aircraft.

Tanner, W.↗