Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “liquid dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Critical Role of Anion–Solvent Interactions for Dynamics of Solvent-in-Salt Solutions

Most polar solvent molecules are unstable toward electrode materials used in Li-based batteries. Solid electrolytes and ionic liquids are far more stable; however, they have relatively low conductivity, and therefore electrical energy storage devices based on them would suffer from low power. Solvent-in-salt (SIS) systems combine chemical stability with relatively high conductivity. Here, we show how the nature of the employed anion affects the structure and dynamics of SIS systems. The transport of ions in lithium bis(fluorosulfonyl)imide (Li-FSI) systems was determined to be always faster than that in lithium bis(trifluoromethanesulfonyl)imide (Li-TFSI) systems. Moreover, we found that viscosity does not solely control conductivity and that the lower conductivity of TFSI – solutions is related to their stronger interaction with the solvent. This restricts solvent dynamics and slows down ion motions compared to that of FSI – . Interestingly, the TFSI–solvent interaction also leads to better charge separation (weaker ion–ion correlations) and a higher transference number for Li. Finally, our results suggest that the ability to tune the solvent network formed around the anions may further improve electrolyte conductivity and Li transference number for safer and more efficient energy storage devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Liquid–Vapor Phase Equilibrium in Molten Aluminum Chloride (AlCl 3 ) Enabled by Machine Learning Interatomic Potentials

Molten salts are promising candidates in numerous clean energy applications, where knowledge of thermophysical properties and vapor pressure across their operating temperature ranges is critical for safe operations. Due to challenges in evaluating these properties using experimental methods, fast and scalable molecular simulations are essential to complement the experimental data. In this study, we developed machine learning interatomic potentials (MLIP) to study the AlCl 3 molten salt across varied thermodynamic conditions (T = 473–613 K and P = 2.7–23.4 bar), which allowed us to predict temperature-surface tension correlations and liquid–vapor phase diagram from direct simulations of two-phase coexistence in this molten salt. Two MLIP architectures, a Kernel-based potential and neural network interatomic potential (NNIP), were considered to benchmark their performance for AlCl 3 molten salt using experimental structure and density values. The NNIP potential employed in two-phase equilibrium simulations yields the critical temperature and critical density of AlCl 3 that are within 10 K (∼3%) and 0.03 g/cm 3 (∼7%) of the reported experimental values. An accurate correlation between temperature and viscosities is obtained as well. In doing so, we report that the inclusion of low-density configurations in their training is critical to more accurately represent the AlCl 3 system across a wide phase-space. The MLIP trained using PBE-D3 functional in the ab initio molecular dynamics (AIMD) simulations (120 atoms) also showed close agreement with experimentally determined molten salt structure comprising Al 2 Cl 6 dimers, as validated using Raman spectra and neutron structure factor. Furthermore, the PBE-D3 as well as its trained MLIP showed better liquid density and temperature correlation for AlCl 3 system when compared to several other density functionals explored in this work. Overall, the demonstrated approach to predict temperature correlations for liquid and vapor densities in this study can be employed to screen nuclear reactors-relevant compositions, helping to mitigate safety concerns.

Ab initio molecular dynamics↗
DOE OSTI2024

Evidence of short chains in liquid sulfur

High energy x-ray pair distribution function measurements show the average coordination number of the first shell in liquid sulfur is 1.86 ± 0.04 across the λ-transition, not precisely 2.0 as widely accepted. This indicates that upon melting, liquid sulfur does not comprise solely of S 8 rings but also possesses a significant number of short chains. Intensities of the pre-peak and first diffraction peak of the x-ray structure factor and third peak height of the pair distribution function all show deviations at the λ-transition temperature T λ , associated with the break-up of S 8 rings and the start of oligomer polymerization. A significant number of non-bonded or loosely bonded “interstitial atoms,” with an average coordination number of 0.20 ± 0.005, are also observed in the so-called “forbidden zone” between the first and second shells upon melting. The number of interstitial atoms is found to decrease to a minimum at the λ-transition, but the majority persist into the high temperature polymerized liquid. Furthermore, the existence of short chains and nearby interstitial atoms represent the two main factors required to initiate the S 8 -ring to chain transition, as proposed by recent molecular dynamics simulations.

Chemical bonding↗
DOE OSTI2023

Dynamic Heterogeneity and Kovacs’ Memory Effects in Supercooled Water

Understanding the properties of supercooled water is important for developing a comprehensive theory for liquid water and amorphous ices. Because of rapid crystallization for deeply supercooled water, experiments on it are typically carried out under conditions in which the temperature and/or pressure are rapidly changing. As a result, information on the structural relaxation kinetics of supercooled water as it approaches (metastable) equilibrium is useful for interpreting results obtained in this experimentally challenging region of phase space. Here, we used infrared spectroscopy and the fast time resolution obtained by transiently heating nanoscale water films to investigate relaxation kinetics (aging) in supercooled water. When the structural relaxation of the water films was followed using a temperature jump protocol analogous to the classic experiments of Kovacs, similar memory effects were observed. In particular, after suitable aging at one temperature, water’s structure displayed an extremum versus the number of heat pulses upon changing to a second temperature before eventually relaxing to a steady-state structure characteristic of that temperature. A random double well model based on the idea of dynamic heterogeneity in supercooled water accounts for the observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Capacitance of thin films containing polymerized ionic liquids

Electrode-polymer interfaces dictate many of the properties of thin films such as capacitance, the electric field experienced by polymers, and charge transport. However, structure and dynamics of charged polymers near electrodes remain poorly understood, especially in the high concentration limit representative of the melts. To develop an understanding of electric field–induced transformations of electrode-polymer interfaces, we have studied electrified interfaces of an imidazolium-based polymerized ionic liquid (PolyIL) using combinations of broadband dielectric spectroscopy, specular neutron reflectivity, and simulations based on the Rayleigh’s dissipation function formalism. Overall, we obtained the camel-shaped dependence of the capacitance on applied voltage, which originated from the responses of an adsorbed polymer layer to applied voltages. This work provides additional insights related to the effects of molecular weight in affecting structure and properties of electrode-polymer interfaces, which are essential for designing next-generation energy storage and harvesting devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Nonlinear Scaling of Water–Ion Interactions and Dynamics in Alkaline Solutions

Water-ion interactions govern many solvent properties critical to solution-phase chemistry and the behavior of liquid water. The water-ion interactions in alkaline conditions were probed using two-dimensional infrared spectroscopy (2D IR), small-angle x-ray scattering (SAXS), and nuclear magnetic resonance spectroscopy (NMR). Energy transfer between the donor molecule KSeCN, used as a 2D IR probe, and the acceptor molecule NaOD was used to track the average separation distance of ions in a D 2 O solution, while SAXS measurements showed effects in the bulk D 2 O solvent. Here, we observe consistent nonlinear scaling in the SeCN - and OD - average separation distance as a function of NaOD concentration while bulk solution D 2 O-to-D 2 O average separation distance remained highly linear. Ultrafast measurements of solution dynamics via 2D IR and polarization-selective pump-probe spectroscopy show consistent scaling in correlation times as a function of concentration. These results suggests that the SeCN - and OD - anions participate in a water-ion network that significantly reduces the degrees of freedom for the distribution of ions in solution below the standard stochastic for ion distribution.

2D IR Spectroscopy↗
DOE OSTI2021

Order-disorder in room-temperature ionic liquids probed via methyl quantum tunneling

Room-temperature ionic liquids are promising candidates for applications ranging from electrolytes for energy storage devices to lubricants for food and cellulose processing to compounds for pharmaceutics, biotransformation, and biopreservation. Due to the ion complexity, many room-temperature ionic liquids readily form amorphous phases upon cooling, even at modest rates. Here, we investigate two commonly studied imidazolium-based room-temperature ionic liquids, 1-ethyl-3-methylimidazolium tetrafluoroborate and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, as well as their mixtures, to demonstrate how the complex interplay between the crystalline and amorphous phases is affected by the processing conditions, such as thermal history, liquid mixing, and applied pressure. We show that quantum tunneling in the cation methyl groups, measured by high-resolution inelastic neutron scattering, can be used to probe the order-disorder in room-temperature ionic liquids (crystalline vs amorphous state) that develops as a result of variable processing conditions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1986

Conceptual definition of a technology development mission for advanced solar dynamic power systems

An initial conceptual definition of a technology development mission for advanced solar dynamic power systems is provided, utilizing a space station to provide a dedicated test facility. The advanced power systems considered included Brayton, Stirling, and liquid metal Rankine systems operating in the temperature range of 1040 to 1400 K. The critical technologies for advanced systems were identified by reviewing the current state of the art of solar dynamic power systems. The experimental requirements were determined by planning a system test of a 20 kWe solar dynamic power system on the space station test facility. These requirements were documented via the Mission Requirements Working Group (MRWG) and Technology Development Advocacy Group (TDAG) forms. Various concepts or considerations of advanced concepts are discussed. A preliminary evolutionary plan for this technology development mission was prepared.

Migra, R. P.↗
DOE OSTI2019

Ion Mobilities, Transference Numbers, and Inverse Haven Ratios of Polymeric Ionic Liquids

We probe the ion mobilities, transference numbers, and inverse Haven ratio of ionic liquids and polymerized ionic liquids as a function of their molecular weight using a combination of atomistic equilibrium and nonequilibrium molecular dynamics simulations. In contrast to expectations, we demonstrate that the inverse Haven ratio increases with increasing degree of polymerization (N) and then decreases at larger N. For a fixed center of mass reference frame, we demonstrate that such results arise as a consequence of the strong cation–cation correlated motions, which exceed (in magnitude) the selfdiffusivity of cations. Together, our findings challenge the premise underlying the pursuit of pure polymeric ionic liquids as high transference number, single-ion conducting electrolytes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The dynamic synthesis time-lag control for the 1.3 GHz LCLS-II Cryomodule test at Fermilab

The 1.3GHz LCLS-II Cryomodule (CM) has 8 cavities and each cavity has 9 RF cells and 80W heater. The 1.3GHz LCLS-II CM is 12.2-meter-long and contains a total 241.3 liters (equivalent liquid) of liquid helium, which is filling up by the 4KW@2.0K cryogenic plant at the Fermilab Cryomodule Test Facility (CMTF). The dynamic synthesis 2K cryogenic control system is built to control the long time-lag, unstable CM cryogenic system, under different modes operations. A report on the results obtained from the dynamic synthesis long time-lag control in the CMTF 1.3GHz CM test will be presented.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Microscopic Theory of Long-Time Center-of-Mass Self-Diffusion and Anomalous Transport in Ring Polymer Liquids

We construct a microscopic theory at the level of segment-scale correlated space–time intermolecular forces for the long-time center-of-mass (CM) diffusion constant and intermediate-time non-Fickian transport in dense solutions and melts of ring polymers. The approach combines ideas of polymer, colloid, and liquid-state statistical mechanics to quantify how the multifractal intra-ring conformational structure and inter-ring packing correlations determine dynamic caging constraints and time-dependent friction. Breakdown of Rouse theory is predicted to occur due to length scale-dependent temporal correlation of forces exerted on pairs of tagged ring segments from surrounding polymers. At large enough degrees of polymerization (N), a stronger scaling of the CM diffusion constant (D ∝ N –2 ) is predicted, with a crossover N D proportional to the product of the system-specific macromolecular volume fraction and dimensionless compressibility. In analogy with caging effects in glass-forming fluids, the theory does appear to begin to fail at sufficiently high N/N D for the center-of-mass diffusivity, likely due to another crossover to an even slower activated transport regime. However, use of N/N D with the theoretically predicted N D , in conjunction with dynamic blob scaling ideas for local Rouse friction, collapses semidilute and concentrated solution simulation data onto a master curve. Based on the same physical ideas employed to predict the diffusion constant, a generalized Langevin equation description is formulated for intermediate-time CM transport. It predicts two subdiffusive regimes that emerge due to the self-similar nature of internal ring structure. Analytic and numerical predictions for the apparent non-Fickian exponent as a function of time, N/N D and dimensionless compressibility, the evolution of the maximum degree of subdiffusive motion with N/N D , and the time scale for recovering Fickian diffusion are made, all of which are in good accordance with melt simulations. Furthermore, the present work sets the stage to address activated dynamics and glass formation on the macromolecular scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Liquid and Glass Phases of an Alkylguanidinium Sulfonate Hydrogen-Bonded Organic Framework

Glassy phases of framework materials feature unique and tunable properties that are advantageous for gas separation membranes, solid electrolytes, and phase-change memory applications. However, the structural and chemical diversity of porous frameworks that can be liquified and quenched into a glass has been limited by thermal decomposition at-or below-the high temperatures required to induce a melting transition. Utilizing a desymmetrization strategy, in this work we report a new guanidinium organosulfonate hydrogen-bonded organic framework (HOF) that melts and vitrifies below 100 °C. In this low-temperature regime, non-covalent interactions between guest molecules and the porous framework become a dominant contributor to the overall stability of the structure, resulting in unusual phase behavior such as guest dependent melting, glass, and recrystallization transitions. Through molecular dynamics simulations and pair distribution function analysis, we show that the local structure of the amorphous liquid and glass phase resembles that of the parent crystalline framework. Access to molten phases of framework materials at moderate temperatures should permit the use of more thermally sensitive functional groups and enhance the structural control and tunability that can be realized in network-forming glasses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Understanding the transport and break up of reactive ejecta

This manuscript investigates reactive- versus hydrodynamic-breakup processes of ejecta. For this paper, the reactive metal is cerium (Ce) and the nonreactive metal is tin (Sn), the nonreactive gas is helium (He) and the reactive gas is deuterium (D 2 ) or hydrogen (H 2 ). Experiments were performed in vacuum and the reactive- and nonreactive-gases at various pressures, where we endeavored to match the post-shock gas densities to differentiate between reactive- versus hydrodynamic-breakup processes. Hydrodynamic breakup sensitively links to the Weber number (gas density, liquid fragment diameter, surface tension, and the square of the relative velocity between the fragment and the gas), whereas reactive breakup links to the reactive dynamics which includes two processes. In one case the reactive metal breaks up into smaller fragments as rapidly as the reaction rate, and in the other a crust grows on the liquid fragments as the reactions occur, a diffusion limited process. In the latter case, the particle diameters increase with time as the crust grows. In this process, which is indicated by the data, particles breakup as the CeD 2 loses strength with increasing temperature, leaving an exponentially increasing diameter.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Bubble Behavior in a Vertically Vibrating Enclosed, Liquid-Filled Cylinder

When subjected to certain harmonic oscillations, the gas bubble in a partially liquid-filled, closed, vertical cylinder will break up. Under certain conditions, some of the gas will migrate to the bottom due to Bjerknes forces. At sufficiently large amplitudes, the bubble will break up into gas bubbles at the top and bottom ends of the cylinder. High-speed imaging captured the dynamics of bubble breakup and gas migration. Several parameters were investigated: oscillation frequency, oscillation acceleration, gas volume fraction, and liquid viscosity.

42 ENGINEERING↗
DOE OSTI2023

Melting curves of ice polymorphs in the vicinity of the liquid–liquid critical point

The possible existence of a liquid–liquid critical point in deeply supercooled water has been a subject of debate due to the challenges associated with providing definitive experimental evidence. The pioneering work by Mishima and Stanley [Nature 392, 164–168 (1998)] sought to shed light on this problem by studying the melting curves of different ice polymorphs and their metastable continuation in the vicinity of the expected liquid–liquid transition and its associated critical point. Based on the continuous or discontinuous changes in the slope of the melting curves, Mishima [Phys. Rev. Lett. 85, 334 (2000)] suggested that the liquid–liquid critical point lies between the melting curves of ice III and ice V. Herein we explore this conjecture using molecular dynamics simulations with a machine learning model based on ab initio quantum-mechanical calculations. We study the melting curves of ices III, IV, V, VI, and XIII and find that all of them are supercritical and do not intersect the liquid–liquid transition locus. We also find a pronounced, yet continuous, change in the slope of the melting lines upon crossing of the liquid locus of maximum compressibility. Finally, we analyze the literature in light of our findings and conclude that the scenario in which the melting curves are supercritical is favored by the most recent computational and experimental evidence. Although the preponderance of evidence is consistent with the existence of a second critical point in water, the behavior of ice polymorph melting lines does not provide strong evidence in support of this viewpoint, according to our calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Numerical simulation of compressible fluid-dynamics in the chamber of inertial fusion energy systems

Here, this paper aims to establish new and innovative modeling capabilities for analyzing chambers in Inertial Fusion Energy (IFE) systems. IFE is emerging as a promising method to achieve fusion power production, but several challenges must be overcome to develop an IFE pilot plant or deploy commercial IFE systems. These challenges are both theoretical and technical, encompassing a deeper understanding of the underlying physical phenomena and the development of new technologies and materials. One of the needs is to develop mathematical models to describe IFE systems and numerical tools to simulate them. This paper contributes to this endeavor by presenting a new OpenFOAM solver for IFE systems, focusing on gas dynamics in their chambers. The analysis and development of chamber designs will play a significant role in the transition from single-shot experiments to high-repetition rates, as there is a need to protect the chamber walls from the intense radiation fields produced by fusion reactions. A promising design option, normally referred to as thick wall chamber design, consists in using lithium or molten salt jet arrays within the chamber. A critical phenomenon is the venting of high-pressure gases from the center to the external part of the chamber, passing through the blanket array. This process involves the propagation and attenuation of strong pressure waves, requiring suitable modeling approaches for compressible fluid-dynamics. The solver proposed in this work implements a multi-material hydrodynamics model tailored to accurately describe the non-linear propagation of pressure waves while avoiding numerical oscillation issues typical of high-velocity compressible simulation. This solver is verified against numerical test cases, validated against experimental data, and applied to the analysis of the High-Yield Lithium-Injection Fusion-Energy (HYLIFE-I) concept. The relevance of this paper is threefold. Firstly, it contributes to developing and testing modeling approaches for compressible fluid-dynamics phenomena, with specific focus on the new and unexplored topic of IFE thick-liquid-wall blanket modeling. Secondly, it marks one of the first applications of the OpenFOAM library in the research field of IFE systems. Finally, the investigated problem is of practical interest for IFE developers, as it provides useful indications about relevant phenomena in pressure wave propagation in the chamber of these systems.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1982

Development of quality assurance methods for epoxy graphite prepreg

Quality assurance methods for graphite epoxy/prepregs were developed. Liquid chromatography, differential scanning calorimetry, and gel permeation chromatography were investigated. These methods were applied to a second prepreg system. The resin matrix formulation was correlated with mechanical properties. Dynamic mechanical analysis and fracture toughness methods were investigated. The chromatography and calorimetry techniques were all successfully developed as quality assurance methods for graphite epoxy prepregs. The liquid chromatography method was the most sensitive to changes in resin formulation. The were also successfully applied to the second prepreg system.

Chen, J. S.↗