Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interface defects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Visualizing heterogeneous dipole fields by terahertz light coupling in individual nano-junctions

The challenge underlying superconducting quantum computing is to remove materials bottleneck for highly coherent quantum devices. The nonuniformity and complex structural components in the underlying quantum circuits often lead to local electric field concentration, charge scattering, dissipation and ultimately decoherence. Here we visualize interface dipole heterogeneous distribution of individual Al/AlO$_{x}$/Al junctions employed in transmon qubits by broadband terahertz scanning near-field microscopy that enables the non-destructive and contactless identification of defective boundaries in nano-junctions at an extremely precise nanoscale level. Our THz nano-imaging tool reveals an asymmetry across the junction in electromagnetic wave-junction coupling response that manifests as hot (high intensity) vs cold (low intensity) spots in the spatial electrical field structures and correlates with defected boundaries from the multi-angle deposition processes in Josephson junction fabrication inside qubit devices. The demonstrated local electromagnetic scattering method offers high sensitivity, allowing for reliable device defect detection in the pursuit of improved quantum circuit fabrication for ultimately optimizing coherence times.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Native defects in MBE-grown CdTe

Deep-level traps in both n- and p-type CdTe layers, grown by molecular-beam epitaxy on GaAs substrates, have been investigated by means of deep-level transient spectroscopy (DLTS). Four of the traps revealed in the DLTS spectra, which displayed exponential kinetics for capture of charge carriers into the trap states, have been assigned to native point defects: Cd interstitial, Cd vacancy, Te antisite defect and a complex formed of the Te antisite and Cd vacancy. Three further traps, displaying logarithmic capture kinetics, have been ascribed to electron states of treading dislocations generated at the mismatched interface with the substrate and propagated through the CdTe layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elemental and lattice-parameter mapping of binary oxide superlattices of (LaNiO 3 ) 4 /(LaMnO 3 ) 2 at atomic resolution

We construct the elemental distribution and lattice strain maps from the measured atomic column positions in a (LaNiO3)(4)/(LaMnO3)(2) superlattice over a large field of view. The correlation between the distribution of B-cations and the lattice parameter in the form of Vegard's law is validated using atomic resolution energy dispersive x-ray spectroscopy (EDS). The maps show negligible Mn intermixing in the LaNiO3 layer, while Ni intermixing in the LaMnO3 layer improves away from the substrate interface to 9.5 atomic% from the 8th period onwards, indicating that the superlattice interfacial sharpness is established as the distance from the substrate increases. The maps allow an observation of the compositional defects of the B-sites, which is not possible by Z-contrast alone. Thus, this study demonstrates a promising approach for atomic scale correlative study of lattice strain and composition, and a method for the calibration of atomic resolution EDS maps.

composition↗

Compact modeling of total ionizing dose and aging effects in MOS technologies

This paper presents a physics-based compact modeling approach that incorporates the impact of total ionizing dose (TID) and stress-induced defects into simulations of metal-oxide-semiconductor (MOS) devices and integrated circuits (ICs). This approach utilizes calculations of surface potential (ψs) to capture the charge contribution from oxide trapped charge and interface traps and to describe their impact on MOS electrostatics and device operating characteristics as a function of ionizing radiation exposure and aging effects. The modeling approach is demonstrated for bulk and silicon-on-insulator (SOI) MOS device. The formulation is verified using TCAD simulations and through the comparison of model calculations and experimental I-V characteristics from irradiated devices. The presented approach is suitable for modeling TID and aging effects in advanced MOS devices and ICs.

36 MATERIALS SCIENCE↗

Study of structure-phase state of oxide films on E110 and E635 alloys at pre- and post-irradiation stages - 2016-0064

SC VNIINM methods have been applied for studying oxide films formed on fuel assemblies during operation in NPP reactors, using the Research Institute of Atomic Reactors' hot cells. Transmission electron microscopy, along with energy-dispersive X-ray spectroscopy, have been applied to study the microstructure, phase, and elements composition of oxide films formed on fuel element cladding samples made of alloys E110 (Zr-1 %Nb) and E635 (Zr-1 %Nb-0.35 %Fe-1.2 %Sn) after the autoclave tests in distilled water, and also after four-year operation (for E110 alloys) and six-year operation (for E635 alloys) in the VVER-1000 reactor. Oxide films formed on the surface of different materials have a different microstructure (grain size, tetragonal phase proportion, presence of defects, etc.) and a different phase composition. Primarily, the crystal structure of oxide films is a monoclinic crystal, but a considerable proportion of the tetragonal phase appears near the 'metal-oxide' interface. Alloys of both types indicate the amorphization of second phase precipitates as the oxide film grows. The study of redistribution of alloying elements between the particles and the oxide film in the E635 alloy shows that iron and niobium are concentrated in pores. The research allows determination of the correlation between the concentration of micropores in the oxide film and an increase in the distance from the 'metal-oxide' interface. The study of the structure-phase state of irradiated oxide films with a thickness ranging from 10 μm (for E110 alloy fuel elements claddings) to 80 μm (formed on the E635 alloy fuel elements claddings) shows the absence of second-phase precipitates within their volume. The research data show that the concentration of micropores in oxide films after irradiation corresponds to concentration of micropores after long-term autoclave tests. Therefore, the reactor irradiation does not result in a change in porosity within the oxide film structure. (authors)

36 MATERIALS SCIENCE↗

Metallic filament formation by aligned oxygen vacancies in ZnO-based resistive switches

The electronic structure of ZnO with defects of oxygen vacancies were investigated by using first-principles methods. Some structure models were constructed in order to investigate the effects of the distribution of oxygen vacancies on the electronic properties of ZnO. By analyzing the calculated results, we found that only the aligned oxygen vacancies can form the conducting channel in ZnO, and the transformation of the oxygen vacancy from charged state to neutral state is consistent with the energetics rule of the forming aligned oxygen vacancies. As for the heterojunction of Pt/ZnO/Pt, the oxygen vacancies near the interface of Pt/ZnO depress the local Schottky barrier effectively, and the aligned oxygen vacancies in ZnO form a conducting filament connecting two Pt electrodes. The metallic filament formation in Pt/ZnO/Pt resistive switching cells should be closely related to the carrier injection from Pt electrode into ZnO and the arrangement of oxygen vacancies in ZnO slab.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Selective Conversion of CO 2 to Methanol on a In 2 O 3– x –TiO 2 (110) Interface: Importance of Oxide–Oxide Interactions

Methanol is a strategic energy vector for the storage and delivery of energy and is a widely used precursor for the synthesis of many high-value chemicals. The hydrogenation of carbon dioxide (CO 2 ) into methanol is a key process in industrial operations. Here, in this study, we show that an oxide-oxide interface generated by a low loading (0.15 ML) of In 2 O 3-x on a TiO 2 (110) substrate has a high activity and selectivity as a catalyst for the CO 2 + 3H 2 → CH 3 OH + H 2 O process. The properties of the In 2 O 3-x -TiO 2 interface under reaction conditions were investigated using a combination of synchrotron-based ambient pressure X-ray photoelectron spectroscopy (AP-XPS), temperature programmed desorption (TPD), and catalytic testing. The In 2 O 3-x overlayer spread out on top of the titania and was rich in defects and O vacancies that activated CO 2 and H 2 as reactants, without destroying CH 3 O and CH 3 OH as reaction products. The In 2 O 3-x /TiO 2 (110) catalyst is at least one order of magnitude more active than bulk indium oxide while maintaining a very high selectivity (~80%) towards methanol production. Under the rich hydrogen environment of methanol synthesis, the oxide-oxide interactions allowed only a partial reduction of the In cations, preventing the formation of metal alloys as seen in the case of catalysts with metal-indium oxide interfaces. Thus, the dispersion of low loadings of In 2 O 3-x on a stable oxide substrate is a valid and low-cost approach for generating efficient catalysts for CO 2 valorization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SPECTROSCOPIC INVESTIGATION OF (NH4)2S TREATED GaSeTe FOR RADIATION DETECTOR APPLICATIONS

The surface of the layered III-VI chalcogenide semiconductor GaSeTe was treated with (NH{sub 4}){sub 2}S at 60 C to modify the surface chemistry and determine the effect on transport properties. Room temperature photoluminescence (PL) measurements were used to assess the effect of the (NH{sub 4}){sub 2}S treatment on surface defect states. Evaluation of the subsequent surface chemistry was performed with high-resolution core-level photoemission measurements. Metal overlayers were deposited on the (NH{sub 4}){sub 2}S treated surfaces and the I-V characteristics were measured. The measurements were correlated to understand the effect of (NH{sub 4}){sub 2}S modification of the interfacial electronic structure with the goal of optimizing the metal/GaSeTe interface for radiation detector devices.

36 MATERIALS SCIENCE↗

The effects of vacuum ultraviolet radiation on low-k dielectric films

Plasmas, known to emit high levels of vacuum ultraviolet (VUV) radiation, are used in the semiconductor industry for processing of low-k organosilicate glass (SiCOH) dielectric device structures. VUV irradiation induces photoconduction, photoemission, and photoinjection. These effects generate trapped charges within the dielectric film, which can degrade electrical properties of the dielectric. The amount of charge accumulation in low-k dielectrics depends on factors that affect photoconduction, photoemission, and photoinjection. Changes in the photo and intrinsic conductivities of SiCOH are also ascribed to the changes in the numbers of charged traps generated during VUV irradiation. The dielectric-substrate interface controls charge trapping by affecting photoinjection of charged carriers into the dielectric from the substrate. The number of trapped charges increases with increasing porosity of SiCOH because of charge trapping sites in the nanopores. Modifications to these three parameters, i.e., (1) VUV induced charge generation, (2) dielectric-substrate interface, and (3) porosity of dielectrics, can be used to reduce trapped-charge accumulation during processing of low-{kappa} SiCOH dielectrics. Photons from the plasma are responsible for trapped-charge accumulation within the dielectric, while ions stick primarily to the surface of the dielectrics. In addition, as the dielectric constant was decreased by adding porosity, the defect concentrations increased.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Slip-activated surface creep with room-temperature super-elongation in metallic nanocrystals

Atom diffusion assisted by surfaces or interfaces (e.g. Coble creep) has been known to be the origin of large creep rates and superplastic softening in nanosized crystals at low temperature. By contrast, source-limited crystal slip in defect-free nanostructures engenders important strengths, but also premature plastic instability and low ductility. Here, using in-situ transmission electron microscopy, we report a slip-activated surface creep mechanism that suppresses the tendency towards plastic instability without compromising the strength, resulting in ultra-large room-temperature plasticity in face-centered-cubic silver nanocrystals. This phenomenon is shown experimentally and theoretically to prevail over a material-dependent range of diameters where surface dislocation nucleation becomes a stimulus to diffusional creep. This work provides new fundamental insight into coupled diffusive-displacive deformation mechanisms maximizing ductility and strength simultaneously in nanoscale materials.

Environmental Molecular Sciences Laboratory↗

Crystallization in supercooled liquid Cu: Homogeneous nucleation and growth

Homogeneous nucleation and growth during crystallization of supercooled liquid Cu are investigated with molecular dynamics simulations, and the microstructure is characterized with one- and two-dimensional x-ray diffraction. The resulting solids are single-crystal or nanocrystalline, containing various defects such as stacking faults, twins, fivefold twins, and grain boundaries; the microstructure is subject to thermal fluctuations and extent of supercooling. Fivefold twins form via sequential twinning from the solid-liquid interfaces. Critical nucleus size and nucleation rate at 31% supercooling are obtained from statistical runs with the mean first-passage time and survival probability methods, and are about 14 atoms and 10{sup 32} m{sup −3}s{sup −1}, respectively. The bulk growth dynamics are analyzed with the Johnson-Mehl-Avrami law and manifest three stages; the Avrami exponent varies in the range of 1–19, which also depends on thermal fluctuations and supercooling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Understanding the switching mechanism of interfacial phase change memory

Phase Change Memory (PCM) is a top candidate for next generation data storage, but it typically suffers from high switching (RESET) current density (20–30 MA/cm 2 ). Interfacial Phase Change Memory (IPCM) is a type of PCM using multilayers of Sb 2 Te 3 /GeTe, with up to 100× lower reported RESET current compared to the standard Ge 2 Sb 2 Te 5 -based PCM. Several hypotheses involving fundamentally new switching mechanisms have been proposed to explain the low switching current densities, but consensus is lacking. Here, we investigate IPCM switching by analyzing its thermal, electrical, and fabrication dependencies. First, we measure the effective thermal conductivity (~0.4 W m -1 K -1 ) and thermal boundary resistance (~3.4 m 2 K GW -1 ) of Sb 2 Te 3 /GeTe multilayers. Simulations show that IPCM thermal properties account only for an ~13% reduction of current vs standard PCM and cannot explain previously reported results. Interestingly, electrical measurements reveal that our IPCM RESET indeed occurs by a melt-quench process, similar to PCM. Finally, we find that high deposition temperature causes defects including surface roughness and voids within the multilayer films. Thus, the substantial RESET current reduction of IPCM appears to be caused by voids within the multilayers, which migrate to the bottom electrode interface by thermophoresis, reducing the effective contact area. These results shed light on the IPCM switching mechanism, indicating that an improved control of layer deposition is necessary to obtain reliable switching.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of Aperiodicity and Roughness on Coherent Heat Conduction in Superlattices

Coherent phonon heat conduction has recently been confirmed experimentally in superlattice structures. Such traveling coherent phonon waves in superlattices lead to a linear increase in thermal conductivity as the number of periods increases. For applications such as thermal insulation or thermoelectrics, minimization of the phonon coherent effect is desirable. In this paper, we use molecular dynamics simulations to study how to control coherent heat conduction in superlattices (SLs). It is found that either aperiodic SLs or SLs with rough interfaces can significantly disrupt coherent heat conduction when the interface densities are high. For sample thickness less than 125 nm, aperiodic SLs with perfect interfaces are found to have the lowest thermal conductivity. We use the atomic Green’s function method to examine the phonon dynamics. The impact of either aperiodicity or interface roughness is attributed to reduced transmittance. Such impact diminishes as the interface density reduces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Boundary scattering of phonons: Specularity of a randomly rough surface in the small-perturbation limit

Scattering of normally incident longitudinal and transverse acoustic waves by a randomly rough surface of an elastically isotropic solid is analyzed within the small-perturbation approach. In the limiting case of a large correlation length L compared with the acoustic wavelength, the specularity reduction is given by 4η 2 k 2 ,where η is the rms roughness and k is the acoustic wave vector, which is in agreement with the well-known Kirchhoff approximation result often referred to as Ziman's equation [J. M. Ziman, Electrons and Phonons (Clarendon Press, Oxford, 1960)]. In the opposite limiting case of a small correlation length, the specularity reduction is discovered to be proportional to η 2 k 4 L 2 , with the fourth power dependence on frequency as in Rayleigh scattering. Numerical calculations for a Gaussian autocorrelation function of surface roughness connect these limiting cases and reveal a maximum of diffuse scattering at an intermediate value of L . This maximum becomes increasingly pronounced for the incident longitudinal wave as the Poisson's ratio of the medium approaches 1/2 as a result of increased scattering into transverse and Rayleigh surface waves. The results imply that thermal transport models using Ziman's formula are likely to overestimate the heat flux dissipation due to boundary scattering, whereas modeling interface roughness as atomic disorder is likely to underestimate scattering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Probing vacancy behavior across complex oxide heterointerfaces

Oxygen vacancies ( V O ● ● ) play a critical role as defects in complex oxides in establishing functionality in systems including memristors, all-oxide electronics, and electrochemical cells that comprise metal-insulator-metal or complex oxide heterostructure configurations. Improving oxide-oxide interfaces necessitates a direct, spatial understanding of vacancy distributions that define electrochemically active regions. We show vacancies deplete over micrometer-level distances in Nb-doped SrTiO 3 (Nb:SrTiO 3 ) substrates due to deposition and post-annealing processes. We convert the surface potential across a strontium titanate/yttria-stabilized zirconia (STO/YSZ) heterostructured film to spatial (<100 nm) vacancy profiles within STO using ( T = 500°C) in situ scanning probes and semiconductor analysis. Oxygen scavenging occurring during pulsed laser deposition reduces Nb:STO substantially, which partially reoxidizes in an oxygen-rich environment upon cooling. These results (i) introduce the means to spatially resolve quantitative vacancy distributions across oxide films and (ii) indicate the mechanisms by which oxide thin films enhance and then deplete vacancies within the underlying substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Battle against Phonons (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum

"Battle against Phonons" was submitted by the Solid State Solar Thermal Energy Conversion (S3TEC) EFRC to the "Life at the Frontiers of Energy Research" video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. This video was selected as one of five winners by a distinguished panel of judges for the special award, "Best with Popcorn". S3TEC, an EFRC directed by Gang Chen at the Massachusetts Institute of Technology is a partnership of scientists from four research institutions: MIT (lead), Oak Ridge National Laboratory, Boston College, and Rensselaer Polytechnic Institute. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of the Solid-State Solar Thermal Energy Conversion Center is 'to create novel, solid-state materials for the conversion of sunlight into electricity using thermal and photovoltaic processes.' Research topics are: solar photovoltaic, photonic, metamaterial, optics, solar thermal, thermoelectric, phonons, thermal conductivity, defects, ultrafast physics, interfacial characterization, matter by design, novel materials synthesis, charge transport, defect tolerant materials, and scalable processing.

14 SOLAR ENERGY↗

Anisotropy of the solid–liquid interface properties of the Ni–Zr B33 phase from molecular dynamics simulation

Solid–liquid interface (SLI) properties of the Ni–Zr B33 phase were determined from molecular dynamics simulations. In order to perform these measurements, a new semi-empirical potential for Ni–Zr alloy was developed that well reproduces the material properties required to model SLIs in the Ni 50.0 Zr 50.0 alloy. In particular, the developed potential is shown to provide that the solid phase emerging from the liquid Ni 50.0 Zr 50.0 alloy is B33 (apart from a small fraction of point defects), in agreement with the experimental phase diagram. The SLI properties obtained using the developed potential exhibit an extraordinary degree of anisotropy. It is observed that anisotropies in both the interfacial free energy and mobility are an order of magnitude larger than those measured to date in any other metallic compound. Moreover, the [0 1 0] interface is shown to play a significant role in the observed anisotropy. Our data suggest that the [0 1 0] interface simultaneously corresponds to the lowest mobility, the lowest free energy and the highest stiffness of all inclinations in B33 Ni–Zr. This finding can be understood by taking into account a rather complicated crystal structure in this crystallographic direction.

36 MATERIALS SCIENCE↗

The role of an interface on Ni film removal and surface roughness after irradiation by femtosecond laser pulses

We have observed thin film removal from glass substrates after the irradiation of Ni films with femtosecond laser pulses in air. It was found that the material removal threshold and laser-induced morphology are dependent on film thickness. With decreasing thickness, material removal transitions from intra-film separation to removal at the Ni-glass interface. The Gaussian energy distribution of the laser pulse allows for intra-film separation in the annular region of the crater and interface separation in the center. We propose a model to explain these data as well as the observed increased surface roughness in the interfacial removal regions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗