Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geoscience”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Relationships between fault characteristics and seismic responses in a large lab-scale tri-axial injection test conducted on a faulted Castlegate Sandstone

Here to investigate mechanisms causing microseismicity (M w < 2) at a CO 2 injection site, a large-scale triaxial block experiment was carried out on a faulted (saw-cut) cubic-meter of Castlegate Sandstone. The experiment consisted of injection tests at varying differential stresses, while monitoring and recording pore pressure and acoustic emissions (AEs). During the experiment, ~33,000 AEs and ~14 mm of horizontal displacement/slip, like a strike-slip fault movement, occurred. To understand the AE responses and ascertain fault characteristics near the located AEs, we modeled the topography of the fault surface, fault aperture, and fault-gouge thickness using pre- and post-experiment laser scans of the fault surface on each half of the block. Additionally, we characterized surface roughness parallel and perpendicular to slip. Models show crushing and flattening of the fault surfaces can be linked to the spatiotemporal distribution of AEs within 50 mm of the fault surface. Approximately 65% of AEs were in areas with small aperture (≤300 μm); thicker fault gouge was observed in adjacent areas with wider aperture and shows a two-fold reduction in grain size relative to unaltered Castlegate Sandstone. This work provides a conceptual understanding on fault surface evolution, which can be applied towards modeling of seismic slip.

58 GEOSCIENCES↗
DOE OSTI2023

Aperture size distribution, length, and preferential location of bed-parallel veins in shale

Bed-parallel, calcite-filled veins (BPVs) are common in shale formations, and although they have been widely described in other studies, little is known about their population aperture size distribution. To address this knowledge gap, we analyzed BPV sizes in outcrops and cores from the Vaca Muerta Formation, Neuquén Basin, Argentina; in two cores from the Marcellus Formation, Appalachian Basin, northeast Pennsylvania; and in one core from the Wolfcamp Shale, Delaware Basin, West Texas. Nine out of ten aperture size populations follow a negative exponential distribution, with one following a weak power law. Bed-parallel vein size distribution and intensity vary among formations and within the same shale. We define three groups of distributions: (1) Vaca Muerta outcrops, with the highest BPV intensity and the largest BPVs (cumulative frequency of 4.9 BPVs per meter [BPVs/m] for apertures 0.265 mm to 8.7 cm); (2) Vaca Muerta cores with a similar BPV intensity overall but with no apertures wider than 1.2 cm; and (3) Vaca Muerta, Wolfcamp, and Marcellus cores with the fewest BPVs (cumulative frequency up to 0.63 BPVs/m) and very few wider than 1 cm. Aperture and length in two outcrop data sets are weakly positively correlated and follow power laws with exponents of 0.44 and 0.49. Mechanical interfaces at boundaries between different lithologies exert a strong control on BPV location, with 65–75% of observed interfaces having BPVs along them. Only 25–30% of the BPVs occur at observed material interfaces, however, and unless subtle, unobserved mechanical layering is present, other factors must also control location. BPV intensity and organic richness (TOC) from Vaca Muerta well logs are correlated in some instances but not in others, indicating TOC is not always a good proxy for BPV location or intensity. Furthermore, these findings provide useful information for modeling of hydraulic fracture treatments where BPVs may influence development of the stimulated fracture network, for example by limiting height growth.

58 GEOSCIENCES↗
DOE OSTI2020

Seismic tomography of compressional wave velocity and attenuation structure for Makushin Volcano, Alaska

Located in the central portion of the Alaska-Aleutian subduction zone, Makushin Volcano is among the most active volcanoes in the United States and has been classified as a very high threat by the National Volcano Early Warning System based on its eruptive history and proximity to the City of Unalaska and international air routes. In 2015, five standalone seismic stations and three mini seismic arrays of 15 stations each were deployed on Unalaska Island to supplement the Alaska Volcano Observatory permanent seismic network. This temporary array was operational for one year. Taking advantage of the increased azimuthal coverage and the array's increased earthquake detection capability, we developed body-wave Vp and Vp/Vs seismic images of the velocity structure beneath the volcano. Our results show a complex structure with the upper 4 km of the crust. The shallow high-Vp features possibly delineate remnant magma pathways or conduits. Low-Vp regions are found east of the caldera at approximately 4–8 km depth. This is in agreement with previous seismic tomographic work and InSAR-based geodetic models, which had identified this region as a possible long-term source of magma. A three-dimensional compressional wave attenuation model complemented the velocity models. In general, we observe regions of corresponding low P-wave velocity and high attenuation east of the summit caldera between 5 and 7 km depth, supporting the presence of a melt-rich zone. The absolute Vp values (5.5–6.0 km/s) in this region are consistent with the presence of a magma body with a mafic signature. Here, we suggest that a triggering mechanism that involves mafic injections into a more evolved shallow magma chamber is representative of the current magmatic system below the volcano, similarly to what petrological studies have inferred for past eruptions.

58 GEOSCIENCES↗
DOE OSTI2020

Thermo-hydrologic processes in maar eruptions: The role of vapor transport and condensation

Phreatomagmatic eruptions occur when magma interacts directly with water or slurries, commonly from groundwater in the shallow crust, resulting in rapid conversion of thermal energy to mechanical energy in a set of processes known as molten fuel-coolant interaction (MFCI). The efficiency of MFCI is controlled by properties of the magma and coolant, contact surface geometry, and system conditions, such as pressure and temperature; phreatomagmatic behavior can range from passive thermal granulation to violent thermohydraulic explosions (Zimanowski et al., 2015). Maar-diatreme eruptions, characterized by repetitive phreatomagmatic explosions, can form in a wide range of near-surface environments, from soft sediment substrate (e.g., Tecuitlapa, Mexico, Ort and Carrasco-Núñez, 2009; Hopi Buttes, AZ, Lefebvre et al., 2013) to hard, fractured country rock (e.g., West Eifel volcanic field, Germany and Massif Central, France, Lorenz, 2003). Country-rock structure, including faults and joints, rock type, and shallow crustal hydrologic properties, can influence an eruption’s behavior by controlling how much and at what rate water can be supplied to the magma (hydraulic flow rate), and determining the sediment: water ratio in the case of soft-sediment substrate eruptions. In a “soft” substrate environment, volcanic tremor can lead to liquefaction of saturated sediment, producing a slurry that may then interact with magma in unique ways (White, 1996; Auer, et al., 2006).

58 GEOSCIENCES↗
DOE OSTI2021

Evaluating the state-of-the-art in remote volcanic eruption characterization Part I: Raikoke volcano, Kuril Islands

Raikoke, a small, unmonitored volcano in the Kuril Islands, erupted in June 2019. We integrate data from satellites (including Sentinel-2, TROPOMI, MODIS, Himawari-8), the International Monitoring System (IMS) infrasound network, and global lightning detection network (GLD360) with information from local authorities and social media to retrospectively characterize the eruptive sequence and improve understanding of the pre-, syn- and post- eruptive behavior. In this work, we observe six infrasound pulses beginning on 21 June at 17:49:55 UTC as well as the main Plinian phase on 21 June at 22:29 UTC. Each pulse is tracked in space and time using lightning and satellite imagery as the plumes drift eastward. Post-eruption visible satellite imagery shows expansion of the island's surface area, an increase in crater size, and a possibly-linked algal bloom south of the island. We use thermal satellite imagery and plume modeling to estimate plume height at 10–12 km asl and 1.5–2 × 10 6 kg/s mass eruption rate. Remote infrasound data provide insight into syn-eruptive changes in eruption intensity. Our analysis illustrates the value of interdisciplinary analyses of remote data to illuminate eruptive processes. However, our inability to identify deformation, pre-eruptive outgassing, and thermal signals, which may reflect the relatively short duration (~12 h) of the eruption and minimal land area around the volcano and/or the character of closed-system eruptions, highlights current limitations in the application of remote sensing for eruption detection and characterization.

58 GEOSCIENCES↗
DOE OSTI2021

Evaluating the state-of-the-art in remote volcanic eruption characterization Part II: Ulawun volcano, Papua New Guinea

Retrospective eruption characterization is valuable for advancing our understanding of volcanic systems and evaluating our observational capabilities, especially with remote technologies (defined here as a space-borne system or non-local, ground-based instrumentation which include regional and remote infrasound sensors). In June 2019, the open-system Ulawun volcano, Papua New Guinea, produced a VEI 4 eruption. We combined data from satellites (including Sentinel-2, TROPOMI, MODIS, Himawari-8), the International Monitoring System infrasound network, and GLD360 globally detected lightning with information from the local authorities and social media to characterize the pre-, syn- and post-eruptive behaviour. The Rabaul Volcano Observatory recorded ~24 h of seismicity and detected SO 2 emissions ~16 h before the visually-documented start of the Plinian phase on 26 June at 04:20 UTC. Infrasound and SO2 detections suggest the eruption started during the night on 24 June 2019 at 10:39 UTC ~38 h before ash detections with a gas-dominated jetting phase. Local reports and infrasound detections show that the second phase of the eruption started on 25 June 19:28 UTC with ~6 h of jetting. The first detected lightning occurred on 26 June 00:14 UTC, and ash emissions were first detected by Himawari-8 at 01:00 UTC. Post-eruptive satellite imagery indicates new flow deposits to the south and north of the edifice and ash fall to the west and southwest. In particular, regional infrasound data provided novel insight into eruption onset and syn-eruptive changes in intensity. We conclude that, while remote observations are sufficient for detection and tracking of syn-eruptive changes, key challenges in data latency, acquisition, and synthesis must be addressed to improve future near-real-time characterization of eruptions at minimally-monitored or unmonitored volcanoes.

58 GEOSCIENCES↗
DOE OSTI2021

Recent seismicity at Ceboruco Volcano (Mexico)

Magma and related hydrothermal fluid movement, and their interaction with solid rock, in active volcanic regions, generate a wide variety of seismic waves whose characterization can mitigate the risk of a potential eruption. Located in the western region of the Trans-Mexican Volcanic Belt, Ceboruco Volcano, whose last eruptive period was 1870–1875, is considered to be one of the most hazardous volcanoes in Mexico. We have conducted a detailed study of the seismicity in the surroundings of Ceboruco's volcanic edifice to assess the current state of this volcano. A dense temporary seismic network with 25 seismic stations in an area of 16 km × 16 km was deployed between November 2016 and July 2017, as part of the P-24 project of the CeMIEGeo consortium; this effort has allowed the detection of 81 earthquakes concentrated beneath the crater with depths between 4 and 8 km. In this study, we observe that the recorded seismicity occurs in swarms, and we specifically identify four sequences that we characterize in detail via the first focal mechanisms available for this volcano. Our results suggest a change in the local seismicity distribution compared to earlier observations, which reported seismic activity near the volcano edifice associated with fluid migration along zones of weakness related to the extensional stresses of the Tepic-Zacoalco rift. The changes in seismic patterns and obtained focal mechanisms are consistent with observed fluid effects at many geothermal sites worldwide, but also could suggest resumption of activity at this currently dormant volcano.

58 GEOSCIENCES↗
DOE OSTI2024

Reaction path model of the formation of abiotic immiscible hydrocarbon fluids in subducted carbonated serpentinites, Lanzo Massif (Western Italian Alps)

Fluids generated from subducted slabs participate in the cycling of deep carbon in the crust and upper mantle. In these fluids, aqueous carbon species vary in oxidation state between +IV and -IV depending on whether the fluids are oxidizing or reducing, respectively. Most studies of subduction-zone fluids have focused on oxidized carbon species. However, recent studies of natural samples have demonstrated the occurrence of deep, reducing fluids, generated in both subducted oceanic upper mantle and crustal rocks. CH 4 -H 2 -rich fluid inclusions in subducted carbonated serpentinites have demonstrated the existence of abiotic, immiscible, hydrocarbon fluids at upper mantle conditions. To investigate the formation of such immiscible hydrocarbon fluids during the evolution of subducted carbonated serpentinites, we used equilibrium constants from the Deep Earth Water model to carry out predictive chemical mass transfer modeling to simulate the alteration reactions. A novel feature of the models was the inclusion of an immiscible hydrocarbon fluid containing six components (CH 4,f , C 2 H 6,f , C 3 H 8,f , isoC 4 H 10,f , CO 2,f , H 2,f ). This feature enabled prediction of the formation of a separate immiscible fluid in equilibrium with aqueous species and minerals. We developed a predictive reaction path model of invasive H 2,f reacting with carbonated serpentinites and interstitial aqueous fluids for comparison with the natural samples from the Lanzo Massif, western Italian Alps. Over a range of temperatures and pressures, immiscible hydrocarbon fluids formed in association with altered mineral assemblages. Reaction progress caused the transformation of carbonated serpentinites and the formation of clinopyroxene, brucite, graphite, and hydrocarbon fluids, along with changes of pH, logfO 2 , and aqueous species. CH 4,f was the most abundant hydrocarbon species in all the models. The overall results at 2.0 GPa and 400 to 450 °C were consistent with the natural samples from the Lanzo Massif. Interestingly, large amounts of H 2 O formed due to oxidation of H 2 . More hydrocarbons and H 2 O formed in models with lower fluid/rock mass ratios or with more reactant H 2 . Models at different pressure and temperature conditions showed similar results with some variation in the relative stabilities of aragonite, graphite and olivine solid solution, and associated differences in mineral sequences, hydrocarbon fluids, values of aqueous species, and the final log fO 2 and pH. As a result, our models strongly support the laboratory and field evidence that reduction of carbonated serpentinites by infiltrating H 2 fluids can cause the formation of immiscible, abiotic hydrocarbon fluids in subduction zones.

58 GEOSCIENCES↗
DOE OSTI2021

Basin scale distributions of dissolved manganese, nickel, zinc and cadmium in the Mediterranean Sea

Samples for dissolved trace metal concentrations were collected during GEOTRACES expedition GA04-N in summer/spring in the Mediterranean Sea, starting in the Atlantic Ocean and sampling both deep basins of the Mediterranean Sea. Outflow of Mediterranean Outflow Water leads to elevated concentrations of Mn, Ni and Zn in the Atlantic Ocean, but a concentration minimum in the Atlantic distribution of Cd. Nevertheless, when comparing the in- and outflow, the Mediterranean is a net source of Cd to the Atlantic Ocean. Surface concentrations of Mn, Ni, Zn and Cd are elevated in the Mediterranean relative to the Atlantic Ocean where Ni and Cd gradually increased along the eastward surface water flow path, Zn reached a homogenous concentration in the order of 1 to 1.5 nM, and Mn displayed a patchy surface distribution. The observed differences are attributable to the different dynamics of their biogeochemical cycling, notably the partitioning between the dissolved and particulate phases due to biological uptake, scavenging and possibly organic complexation. The elevated surface concentrations of Mn, Ni, Zn and Cd in the Mediterranean are derived from atmospheric deposition, where most likely Zn and Cd are mainly sourced from anthropogenic origin, Mn mostly from lithogenic origin and Ni from both anthropogenic and lithogenic origin. Dissolved Zn and Cd, as well as phosphate and nitrate, display striking inter-basin fractionations with elevated concentrations in the deep water of the western basin compared to the deep eastern basin, without a coinciding increase in the apparent oxygen utilization. Given that physical circulation or contribution from biogenic particulate metals cannot explain the elevated dissolved concentrations, an external non-biological source is required. This source is most likely a vertical flux of metal laden particles dissolving through the water column of the western Mediterranean where these particles, most likely from anthropogenic origin, are derived from either atmospheric deposition or particulate material deposited on the continental shelves that makes its way into the deep basin. Furthermore, to confirm or detect trends in dissolved metal concentrations in the deep basin, regular basin wide assessments of the trace metal distributions in the Mediterranean are needed. The distributions of Mn, Ni, Zn and Cd in the Sea of Marmara illustrate that all of these metals can be affected by anthropogenic surface sources and highlight the different susceptibilities of the dissolved metal distributions to supply from remineralization, and to removal through scavenging. This study provides a first baseline to assess future changes and underlines that the Mediterranean marine environment is susceptible to anthropogenic disturbances, with varying effects for different metals due to differing source strengths and biogeochemical cycles.

58 GEOSCIENCES↗
DOE OSTI2023

The influence of submarine canyons-related processes on recent benthic foraminiferal distribution, Espírito Santo Basin, Southeastern Brazil

The complex topography of submarine canyons may result in different composition of benthic foraminifera assemblages. To understand how trophic, hydrological and sedimentological conditions in submarine canyons can influence the distribution of benthic foraminifera, and to use this information to corroborate paleoenvironmental interpretations for the Holocene, we investigated recent benthic foraminiferal assemblages (total fauna >63 μm) and sedimentological data in two canyons (CANWN and CAND) in the Espírito Santo Basin (ESB) between 18°20' and 21°20' S. Surface sediment samples (0–2 cm) were collected inside the canyons (150 to 1300 m water depth) and in shelf-slope adjacent transects (50 to 1300 m water depth). The density, taxonomic diversity, and assemblage composition of benthic foraminifera change with depth and location. The distinct ecological preferences of the most abundant taxa allowed us to recognize five benthic foraminiferal groups. Three groups (V, III, and I) are present in different bathymetric sectors; Group V: outer shelf (50 m), Group III: upper, and middle – lower slope (150 to 400 m), and Group I: middle – lower slope (1000 to 1300 m). Groups II and IV show no characteristic bathymetric distribution and are present only in CAND and in CANWN, respectively. Group V consists of Hanzawaia boueana, Peneroplis planatus, and Quinqueloculina lamarckiana; Group III is dominated by Globocassidulina rossensis and Trifarina spp.; Group I consists of Globocassidulina crassa, Bolivina lowmani, Gavelinopsis versiformis, Alabaminella weddellensis, and Epistominella exigua. The main species in Group II (CAND, 150, 1000 to 1300 m) are Trifarina angulosa, Globocassidulina subglobosa, and Discorbis vilardeboanus. Group IV (middle – lower CANWN, 1000 to 1300 m), consists mainly of agglutinated species Glomospira charoides, Rhabdammina abyssorum, and Psammosphaera fusca. Further, our data suggest that the quantity (and quality) of food supply, hydrodynamic conditions and sediment properties are the main drivers controlling the bathymetric distribution of benthic foraminiferal assemblages in both canyons. The middle – lower CANNW revealed unstable trophic conditions, related to terrigenous sediment input due to turbidity currents. In CAND, the foraminiferal assemblages ecology indicated sufficient organic matter supply that favors species establishment and diversity, indicating a more productive and less unstable environment than in CANWN.

58 GEOSCIENCES↗
DOE OSTI2020

Dynamic in-situ imaging of methane hydrate formation and self-preservation in porous media

Here we present the results of dynamic in-situ 3D X-ray imaging of methane hydrates microstructure during methane hydrate formation and dissociation in sand samples. Short scanning times and high resolution provided by synchrotron X-rays allowed for better understanding of water movement and different types of gas-hydrate formation. Complementing previous observations, we conclude that the process of gas-hydrate formation is accompanied by the water movements caused by cryogenic water suction that happens in sequences of short fast movements with longer equilibrium states in between (when the water is immobile). Based on the 3D microstructure we identified two distinct types of gas-hydrate formation: (i) into the gas pockets and (ii) inside water volumes. For both mechanisms we do not see problems in gas or water supply to support the gas-hydrate formation. The rate of dissociation in the self-preservation mode (pressure drop at negative temperatures) appears to be different for these two types of gas hydrates. This means that the history of the gas-hydrate formation may influence its behaviour at the dissociation stage (e.g. gas-hydrate production).

58 GEOSCIENCES↗