Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “generalized algorithm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Clean Water Production in Cooling Towers

This project developed and demonstrated a novel technology that produces clean water from cooling tower recirculating water by using the natural evaporation and condensation cycle inside cooling towers. The system captures the escaping plume and converts blowdown quality water into high purity water suitable for on-site reuse such as boiler feed. The technology uses electric fields to ionize exhaust plumes, charge the entrained droplets, and direct them toward collection electrodes where they coalesce and flow downward. This allows water recovery at a low energy cost while reducing visible plume emissions. In addition, we developed a complementary software platform that improves overall cooling tower performance. The system uses wireless sensors and physics-based machine learning algorithms to optimize key parameters of the cooling process. For power generation facilities, this increases the thermal efficiency of the cooling loop and condenser, resulting in measurable cycle efficiency gains. Improvements of one percent or more can deliver significant increases in electricity production for the same fuel input.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Filming movies of attosecond charge migration in single molecules with high harmonic spectroscopy

Electron migration in molecules is the progenitor of chemical reactions and biological functions after light-matter interaction. Following this ultrafast dynamics, however, has been an enduring endeavor. Here we demonstrate that, by using machine learning algorithm to analyze high-order harmonics generated by two-color laser pulses, we are able to retrieve the complex amplitudes and phases of harmonics of single fixed-in-space molecules. These complex dipoles enable us to construct movies of laser-driven electron migration after tunnel ionization of N 2 and CO 2 molecules at time steps of 50 attoseconds. Moreover, the angular dependence of the migration dynamics is fully resolved. By examining the movies, we observe that electron holes do not just migrate along the laser polarization direction, but may swirl around the atom centers. Our result establishes a general scheme for studying ultrafast electron dynamics in molecules, paving a way for further advance in tracing and controlling photochemical reactions by femtosecond lasers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Latency considerations for stochastic optimizers in variational quantum algorithms

Variational quantum algorithms, which have risen to prominence in the noisy intermediate-scale quantum setting, require the implementation of a stochastic optimizer on classical hardware. To date, most research has employed algorithms based on the stochastic gradient iteration as the stochastic classical optimizer. In this work we propose instead using stochastic optimization algorithms that yield stochastic processes emulating the dynamics of classical deterministic algorithms. This approach results in methods with theoretically superior worst-case iteration complexities, at the expense of greater per-iteration sample (shot) complexities. We investigate this trade-off both theoretically and empirically and conclude that preferences for a choice of stochastic optimizer should explicitly depend on a function of both latency and shot execution times.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Integrated Land Suitability Assessment for Depots Siting in a Sustainable Biomass Supply Chain

A sustainable biomass supply chain would require not only an effective and fluid transportation system with a reduced carbon footprint and costs, but also good soil characteristics ensuring durable biomass feedstock presence. Unlike existing approaches that fail to account for ecological factors, this work integrates ecological as well as economic factors for developing sustainable supply chain development. For feedstock to be sustainably supplied, it necessitates adequate environmental conditions, which need to be captured in supply chain analysis. Using geospatial data and heuristics, we present an integrated framework that models biomass production suitability, capturing the economic aspect via transportation network analysis and the environmental aspect via ecological indicators. Production suitability is estimated using scores, considering both ecological factors and road transportation networks. These factors include land cover/crop rotation, slope, soil properties (productivity, soil texture, and erodibility factor) and water availability. This scoring determines the spatial distribution of depots with priority to fields scoring the highest. Two methods for depot selection are presented using graph theory and a clustering algorithm to benefit from contextualized insights from both and potentially gain a more comprehensive understanding of biomass supply chain designs. Graph theory, via the clustering coefficient, helps determine dense areas in the network and indicate the most appropriate location for a depot. Clustering algorithm, via K-means, helps form clusters and determine the depot location at the center of these clusters. An application of this innovative concept is performed on a case study in the US South Atlantic, in the Piedmont region, determining distance traveled and depot locations, with implications on supply chain design. The findings from this study show that a more decentralized depot-based supply chain design with 3depots, obtained using the graph theory method, can be more economical and environmentally friendly compared to a design obtained from the clustering algorithm method with 2 depots. In the former, the distance from fields to depots totals 801,031,476 miles, while in the latter, it adds up to 1,037,606,072 miles, which represents about 30% more distance covered for feedstock transportation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Direct NeTS sampling of nuclear graphite $S(α, β, T)$ in Serpent

For advanced reactor applications, Neural Thermal Scattering (NeTS) modules were developed to predict the thermal scattering law (TSL or $S(α, β, T)$) of a nuclear graphite neutron moderator. NeTS are multi-layer, feedforward artificial neural networks, which act as universal function approximators designed for TSL datasets. In this case, a 4-layer neural network with 164 neurons per layer is trained using FLASSH evaluated data in PyTorch and serialized as a torchscript dictionary to predict $S(α, β, T)$ on-the-fly. Relative, absolute and maximum percent deviations of NeTS from File 7 data generated using the FLASSH code are on the order of 0.01%, 0.1% and 1%, respectively, with low inference latencies of 0.000172 s per $S(α, β, T)$ at a given temperature. Capturing the full dimensionality of possible inelastic neutron-lattice interactions, NeTS functionality is embedded in the Serpent Monte Carlo code, where $S(α, β, T)_{NeTS}$ sampling is conducted on-the-fly and compared to ACE look-up-tables for predicting TREAT criticality. k-eff differences between sampling algorithms of 6 pcm are observed and are within the order of Monte Carlo uncertainty. Compared to discrete and continuous-energy ACE files (30 MB and 131 MB per temperature), the NeTS format is on the order of 200–300 kB for a continuous-temperature, interpolation-free representation of $S(α, β, T)$ and cross sections. NeTS-in-Serpent runtimes comparable with ACE look-up tables are achieved by scaling NeTS for high performance computing architectures with hybrid OpenMP + MPI parallelization. This work validates a novel, self-contained reactor physics framework for predictive cross sections, and demonstrates a general methodology for embedding modern machine learning libraries within existing neutronic analysis frameworks.

Nuclear Criticality Safety Program (NCSP)↗
DOE OSTI2022

On the Use of Satellite Nightlights for Power Outages Prediction

Hurricanes are a dominant disaster in the Caribbean, always causing serious power outages throughout the islands. Hurricane Maria was a prime example, causing unimaginable destruction of the power infrastructure of Puerto Rico (PR). Consequently, one month after the hurricane landfall, approximately 80% of the population was still without power. After an event of such massive destruction, the electric power restoration process progresses very slowly. This timeline can be improved using power outage (PO) forecast models that help identify the vulnerable places before the hurricane landfall. Generally, these models are trained with historical power outages records, associated data on weather conditions, and additional information about the natural and built environments. However, PO records are often difficult to acquire, and, in many instances, the power utility companies may not record them. This study utilizes a satellite-based Visible Infrared Imaging Radiometer Suite (VIIRS) night light data product as a surrogate for the power delivery to predict hurricane-induced PO in areas having limited to nonexistent historical data records. The processed satellite data is then used along with geographic variables, and simulated weather data to formulate machine learning-based algorithms to predict PO for future hurricane events. These models are applied and validated in the context of the PR catastrophic storm, Hurricane Maria.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Examination of Global Midlatitude Atmospheric River Lifecycles Using an Object-Oriented Methodology

Tracking atmospheric rivers (ARs) across their lifecycles is a field of recent interest with a multitude of emerging methodologies. The CONNected-objECT (CONNECT) algorithm is adapted for the tracking of global midlatitude AR lifecycles and associated precipitation by implementing a seeded region growing segmentation algorithm, creating the AR-CONNECT algorithm. To facilitate the permissiveness of the methodology, AR-CONNECT is without hard-coded geometric criteria yet is still shown to extract synoptic-scale elongated objects >99.99% of the time. One of the consequences of the methodology is the ability to occasionally track atmospheric water vapor anomalies before evolving into AR geometries, effectively tracking AR genesis further back than other studies. With the aid of subdaily satellite-derived rain data, we investigate the climatology, trends, and patterns of AR lifecycles from 1983–2016 and compare with other AR tracking studies. We find that AR frequency, genesis, and terminus locations are in generally good agreement with other AR tracking methodologies, though with key differences, and that AR frequencies in each hemisphere are determined by the number of AR hotspots. Furthermore, we uncover evidence that certain AR characteristics, such as frequency, areal extent, and duration, show evidence of increasing trends. Midlatitude precipitation uncovered by AR-CONNECT shows contributions up to 50% over land and 65% over the ocean. Trend analysis of AR precipitation shows an increase in precipitation associated with ARs propagated by the Southern Jet Stream and ARs that traverse over the Sahara Desert, among others, but is determined not to be a driver of changes in global precipitation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

LHC physics dataset for unsupervised New Physics detection at 40 MHz

In the particle detectors at the Large Hadron Collider, hundreds of millions of proton-proton collisions are produced every second. If one could store the whole data stream produced in these collisions, tens of terabytes of data would be written to disk every second. The general-purpose experiments ATLAS and CMS reduce this overwhelming data volume to a sustainable level, by deciding in real-time whether each collision event should be kept for further analysis or be discarded. We introduce a dataset of proton collision events that emulates a typical data stream collected by such a real-time processing system, pre-filtered by requiring the presence of at least one electron or muon. This dataset could be used to develop novel event selection strategies and assess their sensitivity to new phenomena. In particular, we intend to stimulate a community-based effort towards the design of novel algorithms for performing unsupervised new physics detection, customized to fit the bandwidth, latency and computational resource constraints of the real-time event selection system of a typical particle detector.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Turbulent flow characteristics in an 84-pin rod bundle for typical and damaged spacer grids

Hexagonal rod bundles arranged in a tightly packed triangular lattice are extensively used for heat transfer and energy generation applications. Staggered spacer grids are used to maintain the structural integrity of gas-cooled fast reactor (GFR) fuel assemblies, while inducing localized turbulence in flow. Damage to these spacer grids results in a disruption of flow fields within these hexagonal fuel bundles. Experimental flow visualizations are critical to identify the differences in local flow properties that the structural damage may cause. This experimental research investigates the flow-field characteristics at a near-wall and center plane in a prototypical 84-pin GFR fuel assembly. Newly installed typical spacers and spacers subject to naturally occurring damage due to material degradation over prolonged experimentation were investigated. Velocity fields were acquired by utilizing the matched-index-of-refraction method to obtain time-resolved particle image velocimetry measurements for a Reynolds number of 12 000. Reynolds decomposition statistical results divulged differences in the time-averaged velocity, velocity fluctuations, flow anisotropy, and Reynolds stress distributions. Galilean decomposition demarcated the influence of spacer grid damage on the velocity fields. To extract turbulent structures and elucidate mechanisms of flow instabilities, proper orthogonal decomposition analysis was employed. Reduced order flow reconstructions enabled the application of vortex identification algorithms to determine the spatial and statistical characteristics of vortices generated. This research work provides unique experimental data on the spacer grid condition-dependent flow. The results offer a deeper understanding of fluid dynamics behavior to support GFR rod bundle design efforts and computational fluid dynamics model validation.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Learning energy-based representations of quantum many-body states

Efficient representation of quantum many-body states on classical computers is a problem of practical importance. An ideal representation of a quantum state combines a succinct characterization informed by the structure and symmetries of the system along with the ability to predict the physical observables of interest. Several machine-learning approaches have been recently used to construct such classical representations, which enable predictions of observables and account for physical symmetries. However, the structure of a quantum state typically gets lost unless a specialized is employed based on prior knowledge of the system. Moreover, most such approaches give no information about what states are easier to learn in comparison with others. Here, we propose a generative energy-based representation of quantum many-body states derived from Gibbs distributions used for modeling the thermal states of classical spin systems. Based on the prior information on a family of quantum states, the energy function can be specified by a small number of parameters using an explicit low-degree polynomial or a generic parametric family such as neural nets and can naturally include the known symmetries of the system. Our results show that such a representation can be efficiently learned from data using exact algorithms in a form that enables the prediction of expectation values of physical observables. Importantly, the structure of the learned energy function provides a natural explanation for the difficulty of learning an energy-based representation of a given class of quantum states when measured in a certain basis. Published by the American Physical Society 2024

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

NRC Multiphysics Analysis Capability Deployment (FY2021--Part 1)

This report details progress and activities of Idaho National Laboratory (INL) on the Nuclear Regulatory Commission (NRC) project “Development and Modeling Support for Advanced Non-Light Water Reactors.” The tasks completed for this report are as follows: First, Task 1d: The net radiation transfer method was implemented into MOOSE for modeling reactor cavity cooling system geometries. RCCS models for two experiments were created: (1) Natural Convection Shutdown Heat Removal Test Facility (NSTF) experiment R022, and (2) HTTR VCS mockup. For validation, computed temperature distributions were compared to measured temperatures. Next, Task 4c: An algorithm for computing the pebble bed reactor equilibrium core isotopic com-position was developed and an initial version is implemented into the reactor multi-physics code Griffin. Initial results for a simplified axisymmetric pebble bed reactor are presented. Finally, Task 7: generation of a reference plant model for molten salt cooled pebble bed reactor.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Incorporation of Physics Phenomenology into an Adaptive Algorithm Framework (Final Report)

We attempt to incorporate prior physics knowledge into a machine learning architecture at an applied application level (empirical) as opposed to the level of fundamental physics (first principles). The purpose of this work is to allow for the application of methods of physics-informed machine learning to a broad range of national security problems, while enhancing the trust in machine-learned models by decreasing the “black box” nature of such methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

A General Spatiotemporal Imputation Framework for Missing Sensor Data

Many applications from precision agriculture, environmental monitoring and transportation networks rely on data collected across space and time over a large geographic area. Missing data poses a significant challenge for any data-driven inference and control tasks. Data imputation or the estimation of missing data can help fill these gaps by utilizing inherent spatial relationships and temporal patterns. A variety of spatiotemporal imputation models have been developed to address missing data in spatiotemporal datasets. However, these classical methods rely on the assumption that the underlying data follows a smooth trend and fail to provide accurate estimates when there is a large number of missing points in the data. Even though there are machine learning driven tensor completion approaches such as convolutional neural network based tensor completion (CoSTCo) that capture the non-linear relationships in the dataset, the transductive nature makes the algorithm less scalable. Thus, existing approaches for estimating the missing information do not effectively capture all dimensions of the spatiotemporal data structure, resulting in erroneous predictions and poor performance. The main contributions of this paper are: (1) We propose a novel inductive framework (G-LSTM) for missing data imputation that integrates a graph neural network with LSTMs to effectively capture both spatial and temporal dependencies. (2) Experimental results on a traffic dataset demonstrate that the proposed GNN integrated with an LSTM framework achieves improved imputation and maintains steady performance even when there are extreme missing conditions in comparison with the state-of-the-art imputation framework (i.e, CoSTCo). (3) The simulation results on a traffic network show up to 69% reduction in mean absolute error and 61% reduction in root mean square error when compared to CoSTCo.

Tharzeen, Aabila↗
DOE OSTI2020

Biclique: an R package for maximal biclique enumeration in bipartite graphs

Bipartite graphs are widely used to model relationships between pairs of heterogeneous data types. Maximal bicliques are foundational structures in such graphs, and their enumeration is an important task in systems biology, epidemiology and many other problem domains. Thus, there is a need for an efficient, general purpose, publicly available tool to enumerate maximal bicliques in bipartite graphs. The statistical programming language R is a logical choice for such a tool, but until now no R package has existed for this purpose. Our objective is to provide such a package, so that the research community can more easily perform this computationally demanding task. Biclique is an R package that takes as input a bipartite graph and produces a listing of all maximal bicliques in this graph. Input and output formats are straightforward, with examples provided both in this paper and in the package documentation. Biclique employs a state-of-the-art algorithm previously developed for basic research in functional genomics.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Deep Symbolic Optimization for Electric Component Sizing in Fixed Topology Power Converters

Power converters (PC) are a major component in any current electronic hardware device. The development and design is usually guided by expert knowledge and heavily relies on human intuition and experience. The process is a very time consuming and costly activity and it is generally hard to improve upon current designs. As a first step towards autonomous PC design, we are here proposing a new framework for the sizing of components for fixed topology PCs based on given design requirements. To this end, we developed surrogate models for rapid evaluation of new topologies and adapt the deep symbolic optimization (DSO) framework to generate new topologies guided by a reinforcement learning training signal. In an empirical evaluation, we show that our DSO based approach is able to find the optimal configuration for all investigated topologies, while reducing the learning time by at least a factor of 100 compared to popular RL algorithms.

Xue, Lincoln↗
DOE OSTI2020

Estimation of distributions via multilevel Monte Carlo with stratified sampling

We design and implement a novel algorithm for computing a multilevel Monte Carlo (MLMC) estimator of the joint cumulative distribution function (CDF) of a vector-valued quantity of interest in problems with random input parameters and initial conditions. Our approach combines MLMC with stratified sampling of the input sample space by replacing standard Monte Carlo at each level with stratified Monte Carlo initialized with proportionally allocated samples. We show that the resulting stratified MLMC (sMLMC) algorithm is more efficient than its standard MLMC counterpart due to the additional variance reduction provided by the stratification of the random parameter's domain, especially at the coarsest levels. Additional computational cost savings are obtained by smoothing the indicator function with a Gaussian kernel, which proves to be an efficient and robust alternative to recently developed polynomial-based techniques.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Truchas-Flow

The truchas flow algorithm is designed for simulating the behavior of incompressible (but not necessarily constant density) fluids on unstructured meshes while allowing for solid and void phases to serve as moving boundaries. The interface between fluids, solids and void is tracked via a geometric volume of fluid approach. This allows for a single fluid formulation of the governing equations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

ZENN: A thermodynamics-inspired computational framework for heterogeneous data–driven modeling

Traditional entropy-based methods—such as cross-entropy loss in classification problems—have long been essential tools for representing the information uncertainty and physical disorder in data and for developing artificial intelligence algorithms. However, the rapid growth of data across various domains has introduced new challenges, particularly the integration of heterogeneous datasets with intrinsic disparities. To address this, we introduce a zentropy-enhanced neural network (ZENN), extending zentropy theory into the data science domain via intrinsic entropy, enabling more effective learning from heterogeneous data sources. ZENN simultaneously learns both energy and intrinsic entropy components, capturing the underlying structure of multisource data. To support this, we redesign the neural network architecture to better reflect the intrinsic properties and variability inherent in diverse datasets. We demonstrate the effectiveness of ZENN on classification tasks and energy landscape reconstructions, showing its superior generalization capabilities and robustness-particularly in predicting high-order derivatives. In image and text classification tasks, ZENN demonstrates superior generalization by introducing a learnable temperature variable that models latent multisource heterogeneity, allowing it to surpass state-of-the-art models on CIFAR-10/100, BBC News, and AG News. As a practical application in materials science, we employ ZENN to reconstruct the Helmholtz energy landscape of Fe3Pt using data generated from density functional theory and capture key material behaviors, including negative thermal expansion and the critical point in the temperature–pressure space. Overall, this work presents a zentropy-grounded framework for data-driven machine learning, positioning ZENN as a versatile and robust approach for scientific problems involving complex, heterogeneous datasets.

36 MATERIALS SCIENCE↗