Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “events”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Search for phenomena beyond the Standard Model in events with large $b$-jet multiplicity using the ATLAS detector at the LHC

A search is presented for new phenomena in events characterised by high jet multiplicity, no leptons (electrons or muons), and four or more jets originating from the fragmentation of b -quarks ( b -jets). The search uses 139 fb -1 of $\sqrt{s}$ = 13 TeV proton–proton collision data collected by the ATLAS experiment at the Large Hadron Collider during Run 2. The dominant Standard Model background originates from multijet production and is estimated using a data-driven technique based on an extrapolation from events with low b -jet multiplicity to the high b -jet multiplicities used in the search. No significant excess over the Standard Model expectation is observed and 95% confidence-level limits that constrain simplified models of R-parity-violating supersymmetry are determined. The exclusion limits reach 950 GeV in top-squark mass in the models considered.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for physics beyond the standard model in events with jets and two same-sign or at least three charged leptons in proton-proton collisions at $\sqrt{s}=$ 13 TeV

A data sample of events from proton-proton collisions with at least two jets, and two isolated same-sign or three or more charged leptons, is studied in a search for signatures of new physics phenomena. The data correspond to an integrated luminosity of $137{\,{\text {fb}}^{-1}} $ at a center-of-mass energy of $13\,{\text {TeV}} $, collected in 2016–2018 by the CMS experiment at the LHC. The search is performed using a total of 168 signal regions defined using several kinematic variables. The properties of the events are found to be consistent with the expectations from standard model processes. Exclusion limits at 95% confidence level are set on cross sections for the pair production of gluinos or squarks for various decay scenarios in the context of supersymmetric models conserving or violating R parity. The observed lower mass limits are as large as $2.1\,{\text {TeV}} $ for gluinos and $0.9\,{\text {TeV}} $ for top and bottom squarks. To facilitate reinterpretations, model-independent limits are provided in a set of simplified signal regions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The cosmic muon and detector simulation framework of the extreme energy events (EEE) experiment

Abstract This paper describes the simulation framework of the extreme energy events (EEE) experiment. EEE is a network of cosmic muon trackers, each made of three multi-gap resistive plate chambers (MRPC), able to precisely measure the absolute muon crossing time and the muon integrated angular flux at the ground level. The response of a single MRPC and the combination of three chambers have been implemented in a GEANT4-based framework (GEMC) to study the telescope response. The detector geometry, as well as details about the surrounding materials and the location of the telescopes have been included in the simulations in order to realistically reproduce the experimental set-up of each telescope. A model based on the latest parametrization of the cosmic muon flux has been used to generate single muon events. After validating the framework by comparing simulations to selected EEE telescope data, it has been used to determine detector parameters not accessible by analysing experimental data only, such as detection efficiency, angular and spatial resolution.

Abbrescia, M.↗

Measurement of the $c$-jet mistagging efficiency in $t\bar{t}$ events using $pp$ collision data at $\sqrt{s}=13$ $\text {TeV}$ collected with the ATLAS detector

A technique is presented to measure the efficiency with which c-jets are mistagged as b-jets (mistagging efficiency) using tt¯ events, where one of the W bosons decays into an electron or muon and a neutrino and the other decays into a quark–antiquark pair. The measurement utilises the relatively large and known W → cs branching ratio, which allows a measurement to be made in an inclusive c-jet sample. The data sample used was collected by the ATLAS detector at √s = 13 TeV and corresponds to an integrated luminosity of 139 fb –1 . Events are reconstructed using a kinematic likelihood technique which selects the mapping between jets and tt¯ decay products that yields the highest likelihood value. The distribution of the b-tagging discriminant for jets from the hadronic W decays in data is compared with that in simulation to extract the mistagging efficiency as a function of jet transverse momentum. The total uncertainties are in the range 3–17%. The measurements generally agree with those in simulation but there are some differences in the region corresponding to the most stringent b-jet tagging requirement.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Synchrophasor Measurements-based Events Detection Using Deep Learning

Deep learning algorithms have been developed for phasor measurement units (PMUs) analysis aiming at providing grid operators to observe and react to significant real-time changes in the grid associated with multiple factors (e.g., power generation and load variations, different type of faults, and equipment mailfunction), or for offline post-event system diagnostics. In this study, a Long Short-Term Memory (LSTM)-based deep neural network (DNN) is adopted and evaluated to identify the most appropriate model configurations for event detection and longer-term anomalous pattern extraction. The proposed DNN model shows the potential on long-term predictions with the ability to capture nonlinear and nonstationary mixture complex patterns in PMU datasets. Real-world PMU in the WECC system were used for model development and validation.

deep learning↗

Ultrafast X-Ray Probes of Elementary Molecular Events

Elementary events that determine photochemical outcomes and molecular functionalities happen on the femtosecond and subfemtosecond timescales. Among the most ubiquitous events are the nonadiabatic dynamics taking place at conical intersections. These facilitate ultrafast, nonradiative transitions between electronic states in molecules that can outcompete slower relaxation mechanisms such as fluorescence. The rise of ultrafast X-ray sources, which provide intense light pulses with ever-shorter durations and larger observation bandwidths, has fundamentally revolutionized our spectroscopic capabilities to detect conical intersections. Recent theoretical studies have demonstrated an entirely new signature emerging once a molecule traverses a conical intersection, giving detailed insights into the coupled nuclear and electronic motions that underlie, facilitate, and ultimately determine the ultrafast molecular dynamics. Following a summary of current sources and experiments, we survey these techniques and provide a unified overview of their capabilities. We discuss their potential to dramatically increase our understanding of ultrafast photochemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assessment of the Phase-to-Ground Fault Apparent Admittance Method with Phase/Ground Boundaries to Detect Types of Electrical Faults for Protective Relays Using Signature Library and Simulated Events

Protective relays in electric power grids recognize the types of electrical faults in a few seconds. The most common detection method to detect the types of electrical faults is based on measuring the angle between the zero and negative sequence currents. However, it is not completely accurate because the phase-to-phase-ground and phase-to-ground electrical faults could have the same detection conditions. Therefore, engineers need to plot the events after an electrical fault to observe the nature of the incidents in detail. In this study, the phase-to-ground fault apparent (PGFA) admittance method with phase/ground boundaries identified the types of electrical faults located in distribution power lines and feeders. This method was based on measuring the PGFA admittance magnitudes for the faulted and nonfaulted phases, resulting in greater than zero and near zero, respectively. The PGFA admittance algorithm was built with MATLAB/Simulink software and tested with signature library and grid simulation events. The PGFA method with phase/ground boundaries was evaluated with the confusion matrix. The measured and predicted values matched in more than 90% of the tests, and the PGFA admittance method with phase/ground boundaries presented an accuracy of 94.3% and a precision of 100%.

42 ENGINEERING↗

Dual Event Generator IOC (siocDualTiming) v1.0

Dual Timing IOC is an EPICS IOC that uses the "Dual Event Generator Support (dual-evg-support) v1.0" (track code: 2026-009) module to perform control and status of the "Dual Event Generator (dual-evg) v1.0" (track code: 2023-012) project, both of them previously disclosed.

Russo, Lucas [Lawrence Berkeley National Laborator↗

Grid Event Signature Library's Signature Matching Tool

The Signature Matching Tool (SMT) is a tool that assists users in labeling any unlabeled signatures, according to the hierarchical, event tags taxonomy developed for the Department of Energy's (DOE) Grid Event Signature Library (GESL).

Joo, Jhi Young [Lawrence Livermore National Labora↗

ASPIRES: Airport Shuttle Planning and Improved Routing Event-driven Simulation

Most of the existing traffic simulation packages require significant calibration work to be able to reflect reality. To evaluate special operations including emerging technologies, a microscopic simulation that tracks detailed interactions of all the elements of the traffic systems is usually needed. This type of simulation is usually computationally demanding. This work developed an Airport Shuttle Planning and Improved Routing Event-driven Simulation (ASPIRES) package to simulate and evaluate current, potential, and future airport shuttle operations. Here, the simulation was driven by data and thus did not require much calibration effort. The discrete-event simulation nature of ASPIRES makes the simulation computationally efficient. Simulating 1 day of shuttle operations takes less than 2s. The study site of this work is the Dallas/Fort Worth International Airport in the U.S. The shuttle service that connects the five terminals of the airport and the rental car center was studied. Travel times, dwell times, and passenger arrivals were simulated using empirical distributions derived mainly from real data to capture the stochastic nature of the rental car center shuttle bus operations. Data on bus miles traveled, bus energy consumption, passenger wait times, and passengers left behind at stops were collected to study the trade-off between energy use and passenger experience. Electric bus and on-demand bus operations were also included. The simulation outputs can show passengers statistics at terminals, shuttles statistics, and charging station statistics. ASPIRES cannot be used to model a generic traffic system but is well-suited for fleet systems.

33 ADVANCED PROPULSION SYSTEMS↗

A systematic analysis and data mining of opioid-related adverse events submitted to the FAERS database

The opioid epidemic has become a serious national crisis in the United States. An indepth systematic analysis of opioid-related adverse events (AEs) can clarify the risks presented by opioid exposure, as well as the individual risk profiles of specific opioid drugs and the potential relationships among the opioids. In this study, 92 opioids were identified from the list of all Food and Drug Administration (FDA)-approved drugs, annotated by RxNorm and were classified into 13 opioid groups: buprenorphine, codeine, dihydrocodeine, fentanyl, hydrocodone, hydromorphone, meperidine, methadone, morphine, oxycodone, oxymorphone, tapentadol, and tramadol. A total of 14,970,399 AE reports were retrieved and downloaded from the FDA Adverse Events Reporting System (FAERS) from 2004, Quarter 1 to 2020, Quarter 3. After data processing, Empirical Bayes Geometric Mean (EBGM) was then applied which identified 3317 pairs of potential risk signals within the 13 opioid groups. Based on these potential safety signals, a comparative analysis was pursued to provide a global overview of opioid-related AEs for all 13 groups of FDA-approved prescription opioids. The top 10 most reported AEs for each opioid class were then presented. Both network analysis and hierarchical clustering analysis were conducted to further explore the relationship between opioids. Results from the network analysis revealed a close association among fentanyl, oxycodone, hydrocodone, and hydromorphone, which shared more than 22 AEs. In addition, much less commonly reported AEs were shared among dihydrocodeine, meperidine, oxymorphone, and tapentadol. On the contrary, the hierarchical clustering analysis further categorized the 13 opioid classes into two groups by comparing the full profiles of presence/absence of AEs. The results of network analysis and hierarchical clustering analysis were not only consistent and cross-validated each other but also provided a better and deeper understanding of the associations and relationships between the 13 opioid groups with respect to their adverse effect profiles.

Research & Experimental Medicine↗

Collection of Disk Failure Events from Alpine, the Parallel File System for Summit Supercomputer

This dataset contains disk (HDD) failure events collected from the Alpine storage system of the Summit supercomputer, hosted at OLCF, spanning from January 4, 2019, to December 21, 2023 (a total of 4 years, 11 months, and 18 days), covering 89% of its operational lifetime. It includes 3,766 disk failure events, each recorded with its detection timestamp (in ISO 8601 format) and detailed by its location within the storage system - rack, enclosure, and drive slot number.

97 MATHEMATICS AND COMPUTING↗

Historical and Future Extreme Event Indices for the Colorado River Basin

Extremes events are occurring more frequently and are projected to increase in the future. This data set includes extreme event indices that were generated for the Colorado River basin using data from the Variable Infiltration Capacity hydrologic model. VIC simulations were run using six CMIP5 earth system models (ESMs), two different time periods, (historical, 1970-1999) and future (2070-2099), and for one Representative Concentration Pathway (RCP 8.5). ESMs available are MPI-ESM-LR, MIROC-ESM, IPSL-CM5A-LR, GFDL-ESM2M, and GFDL-ESM2G. The different indicators include temperature (min/max, freezing days, heating days), precipitation (dry days, max), runoff (min, max), soil moisture (min, max), evapotranspiration (max), snow water equivalent (SWE, max), wind speeds (max), and pressure (min). Detailed information on the indicators, file names, and how they were calculated is included in the README.txt document. Data sets were used to calculate results are in related references Bennett et al. 2020 and Talsma et al. 2021. Details on the VIC model configuration is described in related references Bennett et al. 2018 and Bennett et al. 2017.

54 ENVIRONMENTAL SCIENCES↗

Data for: Time to anoxia: Observations and predictions of oxygen drawdown following coastal flood events

This dataset contains data and code associated with the paper Patel et al. "Time to anoxia: Observations and predictions of oxygen drawdown following coastal flood events".The coastal terrestrial-aquatic interface (TAI) is a highly dynamic system characterized by strong physical, chemical, and biological gradients. In particular, shifting soil redox conditions and consumption of terminal electron acceptors, due in part to dynamic hydrologic conditions, is a strong driver of carbon availability and transformations across TAIs. However, while redox dynamics are well described, our ability to quantitatively forecast rates of oxic to anoxic shifts in soils with different characteristics and inundation regimes is limited. We integrated field measurements, laboratory incubations, and model simulations to improve mechanistic understanding of oxygen consumption dynamics in coastal soils. Continuous in situ monitoring unexpectedly revealed that flooding caused temporary spikes in subsurface dissolved oxygen followed by rapid consumption in the wetlands. To further investigate these mechanisms in a controlled setting, we performed laboratory incubations using surface and subsurface soils from a TAI gradient (defined here as upland forest to transitional forest to wetland) in Western Lake Erie to measure oxygen consumption rates in TAI soils during flood events. In our experiments, wetland soils reached anoxia the fastest, in ∼ 9 h on average, whereas upland soils turned anoxic in ∼ 18 h. Subsurface upland soils did not turn anoxic even after two weeks of saturation in the lab, and their oxygen consumption patterns suggested carbon and/or nutrient limitation. These results are consistent with in-situ groundwater redox and oxygen measurements in the field, where wetland soils exhibited the highest rates of oxygen consumption along the TAI. Model simulations of oxygen consumption suggested that oxygen consumption had stronger abiotic controls in wetland soils but stronger biotic controls in upland soils, providing a useful framework for future incubation experiments. Microbial activity is a strong driver of oxygen consumption in TAI soils, although it is constrained by the availability of dissolved carbon in subsurface soils.This dataset contains a compressed (.zip) archive of the data and R scripts used for this manuscript. The dataset includes files in .csv format, which can be accessed and processed using MS Excel or R. This archive can also be accessed on GitHub at https://github.com/COMPASS-DOE/cmps-time_to_anoxia (DOI: 10.5281/zenodo.10815374).

54 ENVIRONMENTAL SCIENCES↗

Full Moment Tensor Solutions of U.S. Underground Nuclear Tests for Event Screening and Yield Estimation

Moment tensor (MT) solutions are proving increasingly valuable in explosion monitoring, especially now that they are more routinely calculated for the unconstrained, full (six component) MT. In this study, we have calculated MTs for U.S. underground nuclear tests conducted at the Nevada National Security Site using seismic recordings primarily from the Livermore Nevada Network. We are able to determine them for 130 nuclear explosions from 1970 to 1996 for a range of yields and under a variety of material conditions, which we have supplemented with 10 additional chemical explosions at the test site. The result is an extensive database of MTs that can be used to assess the performance of important monitoring tasks such as event identification and yield determination. We test the explosion event screening on the fundamental lune of the MT eigensphere and find MT screening to be a robust discriminant between earthquakes and explosions. We then explore the estimation of moment-derived yield, in which we find that material properties are the largest contributor to differences in the estimated moment-to-yield ratio. Additionally, further research conducted on this dataset can be used to develop, test, and improve various explosion monitoring methodologies.

58 GEOSCIENCES↗

A Multimodal Event Catalog and Waveform Data Set That Supports Explosion Monitoring from Nevada, U.S.A.

Multimodal, curated data sets and nuisance event catalogs remain rare in the explosion monitoring community relative to curated seismic data sets. The source of this relative absence is the difficultly in deploying multimodal receivers that sense the seismic, acoustic, and other modalities from multiphysics sources. We provide such a data set in this study that delivers seismic, infrasound, and electromagnetic (magnetometer) sensor records collected over a two–week period, within 255 km of a 10 ton buried chemical explosion called DAG–4 that was located at 37.1146°, –116.0693° on 22 June 2019 21:06:19.88 UTC. This catalog includes 485 seismic, seismoacoustic, and infrasound–only events that an expert analyst manually built by reviewing waveforms from 29 seismic and infrasound sensors. Our data release includes waveforms from these 29 seismic, infrasound, and seismoacoustic stations and two magnetometer stations and their station metadata. We deliver these waveforms in NNSA KB Core CSS.w format (i4) with a corresponding wfdisc table that provides the header information. Here, we expect that this data set will provide a valuable, benchmark resource to develop signal processing algorithms and explosion monitoring methods against manual, human observations.

58 GEOSCIENCES↗

Testing and Design of Discriminants for Local Seismic Events Recorded during the Redmond Salt Mine Monitoring Experiment

The Redmond Salt Mine (RSM) Monitoring Experiment in Utah was designed to record seismoacoustic data at distances less than 50 km for algorithm testing and development. During the experiment from October 2017 to July 2019, six broadband seismic stations were operating at a time, with three of them having fixed locations for the duration, whereas the three other stations were moved to different locations every one-and-half to two-and-half months. RSM operations consist of nighttime underground blasting several times per week. The RSM is located in proximity to a belt of active seismicity, allowing direct comparison of natural and anthropogenic sources. Using the recorded data set, we built 1373 events with local magnitude (M L ) of -2.4 and lower to 3.3. For 75 blasts (RMEs) from the Redmond Salt Mine and 206 tectonic earthquakes (EQs), both M L and the coda duration magnitude (MC) are well constrained. We used these events to test and design discriminants that separate the RMEs from the EQs and are effective at local distances. The discriminants consist of M L -M C , low-frequency Sg to high-frequency Sg, Pg/Sg phase-amplitude ratios, and Rg/Sg spectral amplitude ratios, as well as different combinations of two or more of these classifiers. The areas under the receiver operating characteristic curves (AUCs) of 0.92–1.0 for M L -M C , low-frequency Sg to high-frequency Sg, and Rg/Sg indicate that these discriminants are very effective. Conversely, the AUC of only 0.57 for Pg/Sg suggests that this discriminant is only slightly better than a random classifier. Among the effective classifiers, Rg/Sg, shows the lowest likelihood of misclassification (4.3%) for the populations. In conclusion, results of joint discriminant analyses suggest that even the arguably ineffective single classifier, like Pg/Sg in this case, can provide some value when used in combination with others.

58 GEOSCIENCES↗

Multi-Event Explosive Seismic Source for the 2022 M w 6.3 Hunga Tonga Submarine Volcanic Eruption

The eruption of the Hunga Tonga–Hunga Ha’apai submarine volcano on 15 January 2022 produced a variety of geophysical responses, including a significant seismic signal. We study the seismic source process of this event by inverting for moment tensors (MTs) using regional surface waves (Rayleigh, Love). By comparing inversion results for the eruption with eight nearby earthquakes, we show that it is possible to discriminate MT source types. Our inversion yields a shallow explosive source for the eruption and reveals the importance of trade-offs among depth, magnitude, and source type. We illustrate these trade-offs by representing the misfit variations over the eigenvalue lune. Finally, we invert for the source-time function of the sequence of explosions that occurred in the first minutes of the eruption. The multi-event source-time function comprises four subevents spanning ~270 s, with a total magnitude estimate of M w 6.34 ± 0.10.

58 GEOSCIENCES↗