Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “environment variables”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Co-Simulation Model for Optimal Wind-Hydro Coordination Using Wind Farm Control Dynamics

The growing share of Variable Renewable Energy sources (VRES) in power systems presents challenges for regula- tors, grid operators and energy producers. The VRES’ operation has limited flexibility in their operations, as they are highly dependent on ambient environments. To address these challenges, decision-makers must consider multiple objectives, among these are revenue, power system services and mechanical load on wind turbines. Coordinated operation of power plants and different wind farm control strategies are examples of measures that can benefit these objectives. This study proposes a Multi-Objective Linear Programming (MOLP) model to simulate the optimum operation of wind and hydropower plants that share limited transmission capacity. Further, wind farm control dynamics are included to obtain realistic output power and accumulated damage. From this, a case study based on a relevant location in Norway is presented to analyze the improved effect of wind- hydro coordination and wind farm control in achieving the objectives of accumulated wind turbine damage and total revenue of the hybrid power system. In addition, the study considers the potential advantages of adding a variable-speed pump to the hydropower plant. The results demonstrate that by considering multiple objectives in the optimization, one may achieve better overall performance of the objectives. By utilizing the flexibility of hydro storage, the decision maker may adjust to obtain the most desired outcome. Moreover, the added flexibility of utilizing a pump for hydro storage shows great improvements for the combined revenue of the power plants and reduced curtailment of the wind farm. However, less impact is observed from using a variable speed pump compared to a fixed speed pump.

13 HYDRO ENERGY↗

Stream and ocean hydrodynamics mediate partial migration strategies in an amphidromous Hawaiian goby

Abstract Partial migration strategies, in which some individuals migrate but others do not, are widely observed in populations of migratory animals. Such patterns could arise via variation in migratory behaviors made by individual animals, via genetic variation in migratory predisposition, or simply by variation in migration opportunities mediated by environmental conditions. Here we use spatiotemporal variation in partial migration across populations of an amphidromous Hawaiian goby to test whether stream or ocean conditions favor completing its life cycle entirely within freshwater streams rather than undergoing an oceanic larval migration. Across 35 watersheds, microchemical analysis of otoliths revealed that most adult Awaous stamineus were freshwater residents (62% of n = 316 in 2009, 83% of n = 274 in 2011), but we found considerable variation among watersheds. We then tested the hypothesis that the prevalence of freshwater residency increases with the stability of stream flows and decreases with the availability of dispersal pathways arising from ocean hydrodynamics. We found that streams with low variation of daily discharge were home to a higher incidence of freshwater residents in each survey year. The magnitude of the shift in freshwater residency between survey years was positively associated with predicted interannual variability in the success of larval settlement in streams on each island based on passive drift in ocean currents. We built on these findings by developing a theoretical model of goby life history to further evaluate whether mediation of migration outcomes by stream and ocean hydrodynamics could be sufficient to explain the range of partial migration frequency observed across populations. The model illustrates that the proportion of larvae entering the ocean and differential survival of freshwater‐resident versus ocean‐going larvae are plausible mechanisms for range‐wide shifts in migration strategies. Thus, we propose that hydrologic variation in both ocean and stream environments contributes to spatiotemporal variation in the prevalence of migration phenotypes in A. stamineus . Our empirical and theoretical results suggest that the capacity for partial migration could enhance the persistence of metapopulations of diadromous fish when confronted with variable ocean and stream conditions.

54 ENVIRONMENTAL SCIENCES↗

Simulating Micrometeoroid Bombardment on Mercury: Identifying New Space Weathering Features in the Laboratory

Airless bodies are continually exposed to the harsh interplanetary space environment, causing the alteration of their surfaces through a process known as space weathering (SW). SW is dominated by solar wind irradiation and micrometeoroid bombardment, which together alter the spectral, microstructural, and chemical characteristics of grains on the surface of airless bodies. The effects of SW are variable and depend on the heliocentric distance and the initial composition of the planetary surface, among other factors. On the Moon and S- type asteroids, it is well established that SW darkens and reddens the surface of these bodies and attenuates absorption bands across the Vis-NIR wavelengths. These spectral effects are largely the result of the production of metallic Fe nanoparticles (npFe). However, Mercury’s SW environment is unique compared to the Moon and S-type asteroids. Mercury is a geochemical endmember, with a surface composition low in Fe (<2 wt.%) and enriched in volatile components, including regions of the surface hypothesized to contain up to 4 wt.% graphite in the low reflectance material (LRM). In fact, the presence of graphite on Mercury has been hypothesized to act as a reducing agent for silicates during SW to produce Si-bearing Fe-rich metal. In addition, its location in the solar system exposes Mercury to an extreme SW environment, with the surface of the planet experiencing an intense solar wind flux and higher flux and velocity of micrometeoroid impactors compared to the Moon and S-type asteroids. The effects that such harsh SW has on materials with the unique compositional characteristics of Mercury are not well constrained. To better understand SW at Mercury, we must investigate these processes in the laboratory. Here, we present the results of our analyses of the spectral, microstructural and chemical characteristics of Mercury analog samples irradiated by pulsed laser to simulate the short duration, high temperature events associated with micrometeoroid impacts.

Nick Bott↗

The Mercury Resistance Operon: From an Origin in a Geothermal Environment to an Efficient Detoxification Machine

Mercuric mercury (Hg[II]) is a highly toxic and mobile element that is likely to have had a pronounced and adverse effect on biology since Earth’s oxygenation ~2.4 billion years ago due to its high affinity for protein sulfhydryl groups, which upon binding destabilize protein structure and decrease enzyme activity, resulting in a decreased organismal fitness. The central enzyme in the microbial mercury detoxification system is the mercuric reductase (MerA) protein, which catalyzes the reduction of Hg(II) to volatile Hg(0). In addition to MerA, mer operons encode for proteins involved in regulation, Hg binding, and organomercury degradation. Mer-mediated approaches have had broad applications in the bioremediation of mercury-contaminated environments and industrial waste streams. Here, we examine the composition of 272 individual mer operons and quantitatively map the distribution of mer-encoded functions on both taxonomic SSU rRNA gene and MerA phylogenies. The results indicate an origin and early evolution of MerA among thermophilic bacteria and an overall increase in the complexity of mer operons through evolutionary time, suggesting continual gene recruitment and evolution leading to an improved efficiency and functional potential of the Mer detoxification system. Consistent with a positive relationship between the evolutionary history and topology of MerA and SSU rRNA gene phylogenies (Mantel R = 0.81, p < 0.01), the distribution of the majority of mer functions, when mapped on these phylograms, indicates an overall tendency to inherit mer-encoded functions through vertical descent. However, individual mer functions display evidence of a variable degree of vertical inheritance, with several genes exhibiting strong evidence for acquisition via lateral gene transfer and/or gene loss. Collectively, these data suggest that (i) mer has evolved from a simple system in geothermal environments to a widely distributed and more complex and efficient detoxification system, and (ii) merA is a suitable biomarker for examining the functional diversity of Hg detoxification and for predicting the composition of mer operons in natural environments.

59 BASIC BIOLOGICAL SCIENCES↗

Metabolic network reconstruction and flux variability analysis of storage synthesis in developing oilseed rape (Brassica napus L.) embryos

Computational simulation of large-scale biochemical networks can be used to analyze and predict the metabolic behavior of an organism, such as a developing seed. Based on the biochemical literature, pathways databases and decision rules defining reaction directionality we reconstructed bna572, a stoichiometric metabolic network model representing Brassica napus seed storage metabolism. In the highly compartmentalized network about 25% of the 572 reactions are transport reactions interconnecting nine subcellular compartments and the environment. According to known physiological capabilities of developing B. napus embryos, four nutritional conditions were defined to simulate heterotrophy or photoheterotrophy, each in combination with the availability of inorganic nitrogen (ammonia, nitrate) or amino acids as nitrogen sources. Based on mathematical linear optimization the optimal solution space was comprehensively explored by flux variability analysis, thereby identifying for each reaction the range of flux values allowable under optimality. The range and variability of flux values was then categorized into flux variability types. Across the four nutritional conditions, approximately 13% of the reactions have variable flux values and 10-11% are substitutable (can be inactive), both indicating metabolic redundancy given, for example, by isoenzymes, subcellular compartmentalization or the presence of alternative pathways. About one-third of the reactions are never used and are associated with pathways that are suboptimal for storage synthesis. Fifty-seven reactions change flux variability type among the different nutritional conditions, indicating their function in metabolic adjustments. This predictive modeling framework allows analysis and quantitative exploration of storage metabolism of a developing B. napus oilseed.

59 BASIC BIOLOGICAL SCIENCES↗

Three Experiments Examining the Use of Electroencephalogram,Event-Related Potentials, and Heart-Rate Variability for Real-Time Human-Centered Adaptive Automation Design

Adaptive automation represents an advanced form of human-centered automation design. The approach to automation provides for real-time and model-based assessments of human-automation interaction, determines whether the human has entered into a hazardous state of awareness and then modulates the task environment to keep the operator in-the-loop , while maintaining an optimal state of task engagement and mental alertness. Because adaptive automation has not matured, numerous challenges remain, including what the criteria are, for determining when adaptive aiding and adaptive function allocation should take place. Human factors experts in the area have suggested a number of measures including the use of psychophysiology. This NASA Technical Paper reports on three experiments that examined the psychophysiological measures of event-related potentials, electroencephalogram, and heart-rate variability for real-time adaptive automation. The results of the experiments confirm the efficacy of these measures for use in both a developmental and operational role for adaptive automation design. The implications of these results and future directions for psychophysiology and human-centered automation design are discussed.

Prinzel, Lawrence J., III↗

Economic optimization of operations for hybrid energy systems under variable markets

We prosed a hybrid energy systems (HES) which is an important element to enable increasing penetration of clean energy. Our paper investigates the operations flexibility of HES, and develops a methodology for operations optimization for maximizing economic value based on predicted renewable generation and market information. A multi-environment computational platform for performing such operations optimization is also developed. In order to compensate for prediction error, a control strategy is accordingly designed to operate a standby energy storage element (ESE) to avoid energy imbalance within HES. The proposed operations optimizer allows systematic control of energy conversion for maximal economic value. Simulation results of two specific HES configurations are included to illustrate the proposed methodology and computational capability. These results demonstrate the economic viability of HES under proposed operations optimizer, suggesting the diversion of energy for alternative energy output while participating in the ancillary service market. Economic advantages of such operations optimizer and associated flexible operations are illustrated by comparing the economic performance of flexible operations against that of constant operations. Sensitivity analysis with respect to market variability and prediction error, are also performed.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Turbulent mixing and removal of ozone within an Amazon rainforest canopy

Simultaneous profiles of turbulence statistics and mean ozone mixing ratio are used to establish a relation between eddy diffusivity and ozone mixing within the Amazon forest. A one–dimensional diffusion model is proposed and used to infer mixing time scales from the eddy diffusivity profiles. Data and model results indicate that during daytime conditions, the upper (lower) half of the canopy is well (partially) mixed most of the time and that most of the vertical extent of the forest can be mixed in less than an hour. During nighttime, most of the canopy is predominantly poorly mixed, except for periods with bursts of intermittent turbulence. Even though turbulence is faster than chemistry during daytime, both processes have comparable time scales in the lower canopy layers during nighttime conditions. Nonchemical loss time scales (associated with stomatal uptake and dry deposition) for the entire forest are comparable to turbulent mixing time scale in the lower canopy during the day and in the entire canopy during the night, indicating a tight coupling between turbulent transport and dry deposition and stomatal uptake processes. Because of the significant time of day and height variability of the turbulent mixing time scale inside the canopy, it is important to take it into account when studying chemical and biophysical processes happening in the forest environment. In conclusion, the method proposed here to estimate turbulent mixing time scales is a reliable alternative to currently used models, especially for situations in which the vertical distribution of the time scale is relevant.

54 ENVIRONMENTAL SCIENCES↗

Parallel membership queries on very large scientific data sets using bitmap indexes

© 2019 John Wiley & Sons, Ltd. Many scientific applications produce very large amounts of data as advances in hardware fuel computing and experimental facilities. Managing and analyzing massive quantities of scientific data is challenging as data are often stored in specific formatted files, such as HDF5 and NetCDF, which do not offer appropriate search capabilities. In this research, we investigated a special class of search capability, called membership query, to identify whether queried elements of a set are members of an attribute. Attributes that naturally have classification values appear frequently in scientific domains such as category and object type as well as in daily life such as zip code and occupation. Because classification attribute values are discrete and require random data access, performing a membership query on a large scientific data set creates challenges. We applied bitmap indexing and parallelization to membership queries to overcome these challenges. Bitmap indexing provides high performance not only for low cardinality attributes but also for high cardinality attributes, such as floating-point variables, electric charge, or momentum in a particle physics data set, due to compression algorithms such as Word-Aligned Hybrid. We conducted experiments, in a highly parallelized environment, on data obtained from a particle accelerator model and a synthetic data set.

Yildiz, Beytullah↗

Evaluation of energy savings potential of variable refrigerant flow (VRF) from variable air volume (VAV) in the U.S. climate locations

Variable refrigerant flow (VRF) systems are known for their high energy performance and thus can improve energy efficiency both in residential and commercial buildings. The energy savings potential of this system has been demonstrated in several studies by comparing the system performance with conventional HVAC systems such as rooftop variable air volume systems (RTU-VAV) and central chiller and boiler systems. This paper evaluates the performance of VRF and RTU-VAV systems in a simulation environment using widely-accepted whole building energy modeling software, EnergyPlus. A medium office prototype building model, developed by the U.S. Department of Energy (DOE), is used to assess the performance of VRF and RTU-VAV systems. Each system is placed in 16 different locations, representing all U.S. climate zones, to evaluate the performance variations. Both models are compliant with the minimum energy code requirements prescribed in ASHRAE standard 90.1-2010 — energy standard for buildings except low-rise residential buildings. Finally, a comparison study between the simulation results of VRF and RTU-VAV models is made to demonstrate energy savings potential of VRF systems. The simulation results show that the VRF systems would save around 15–42% and 18–33% for HVAC site and source energy uses compared to the RTU-VAV systems. In addition, calculated results for annual HVAC cost savings point out that hot and mild climates show higher percentage cost savings for the VRF systems than cold climates mainly due to the differences in electricity and gas use for heating sources.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Synthesis of size tuneable cadmium sulphide nanoparticles from a single source precursor using ammonia as the solvent

Graphical abstract: UV-vis absorption spectra for CdS prepared by decomposing cadmium xanthates (Cd(ROCS{sub 2}){sub 2}) exhibit a marked blue-shift with increasing the alkyl chain length (where R denotes: (a) -C{sub 2}H{sub 5}, (b) -C{sub 4}H{sub 9}, (c) -C{sub 8}H{sub 17}, and (d) -C{sub 12}H{sub 25}, respectively), indicating the progressive size reduction of formed CdS nanoparticles. Highlights: Black-Right-Pointing-Pointer Synthesis of CdS nanoparticles using a single source precursor. Black-Right-Pointing-Pointer Tailoring the nanocrystal sizes using cadmium alkyl xanthate with different carbonyl length. Black-Right-Pointing-Pointer Preparation in an environment-friendly solvent. -- Abstract: Size tuneable cadmium sulphide nanoparticles of a few nanometres in size were prepared by thermolysis of a single source precursor of cadmium xanthates with variable carbon chain length (Cd(ROCS{sub 2}){sub 2}, where R denotes -C{sub 2}H{sub 5}, -C{sub 4}H{sub 9}, -C{sub 8}H{sub 17} and -C{sub 12}H{sub 25}, respectively) in an ammonia solution. The particle size, morphology and crystallinity of these nanoparticles were characterized using X-ray powder diffractometry, transmission electron microscopy, and nitrogen adsorption/desorption techniques. The results show that hexagonal CdS nanoparticles can be produced by thermolysis of cadmium alkyl xanthate in an ammonia solution at a temperature as low as 100 Degree-Sign C. The size of CdS particles (between 5.60 nm and 3.71 nm) decreases with increasing length of carbon chain in the precursor, as further confirmed by UV-visible and fluorescence spectrophotometric measurements. The size tuning mechanism of CdS from cadmium alkyl xanthate is also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sol-gel Synthesis and Characterization of Gels with Compositions Relevant to Hydrated Glass Alteration Layers

During the processes associated with glass corrosion, porous alteration gel layers typically form upon exposure to aqueous conditions for extended time periods. The impacts of the alteration gel layer on glass durability have not been agreed upon in the glass science community. In particular, the formation mechanisms of the alteration gel layers are still largely unknown and require further investigation. However, alteration gel layers often require months to years to develop and are often too thin to adequately characterize. Meanwhile, silicate sol-gels are relatively easy to synthesize in bulk with custom compositions relevant to alteration gel layers. If glass alteration gel layers and synthetic sol-gel silicate gels demonstrate physical and chemical properties that are sufficiently similar, synthetic silicate gels could be used as analogues for glass alteration gel layers in future studies. In this study, sol-gels were made with custom compositions at various pH values to evaluate the effect of pH on gel structure and morphology. Several other variables were examined as well, such as composition, drying, and aging. Sol-gels were created by sequential additions of organometallic precursors in a single container. Synthesis procedural steps are provided in further detail within the text. Sol-gels were analyzed with several techniques including Small Angle X-ray Scattering (SAXS), gas adsorption, and He pynchometry to determine the effects of the variables on physical properties. Results show that sol-gels prepared at pH 3 consistently contained fewer primary particles with diameters larger than 72 Å and fewer pores with diameters larger than 300 Å compared to sol-gels synthesized at pH 7 and 9. Composition was shown to have no discernable effect on primary particle and pore sizes at any pH.

Reiser, Joelle TG↗

CROCUS High-Frequency Measurements of CO₂, H₂O, Wind, and Temperature at University of Illinois Chicago

As of April 9, 2026: this dataset is currently being versioned to include data up to March 31, 2026. Once the versioning process is complete, new data files will be available for access. The dataset metadata will also be updated to reflect the data availability of the new data being versioned. Raw atmospheric measurements collected at the University of Illinois Chicago (UIC) as part of the Community Research on Climate and Urban Science (CROCUS) project. The data includes high-frequency measurements of carbon dioxide (CO₂) concentration, water vapor (H₂O) concentration, wind speed (U, V, W components), temperature, and atmospheric pressure. These raw data are recorded by the LI-7500DS Open Path CO₂/H₂O Analyzer and a sonic anemometer at a 10 Hz acquisition frequency, providing the necessary inputs for calculating fluxes of CO₂, H₂O, heat, and momentum. In addition to gas concentration measurements, the dataset includes diagnostic information from the instruments, including absorptance, sample and reference signals, and diagnostic values. The data were collected to study urban atmospheric conditions and contribute to flux calculations for urban climate research. These measurements form the basis for calculating 30-minute average fluxes of key atmospheric variables using the eddy covariance method. This dataset provides critical raw input data for researchers interested in atmospheric fluxes, urban air quality, and the interaction between the urban environment and atmospheric processes. The data is part of the U.S. Department of Energy’s Biological and Environmental Research (BER) program, under the CROCUS Urban Integrated Field Laboratory (UIFL) project.

54 ENVIRONMENTAL SCIENCES↗

RELAP-7 Development Updates

RELAP-7 is a nuclear systems safety analysis code being developed at the Idaho National Laboratory, and is the next generation tool in the RELAP reactor safety/systems analysis application series. RELAP-7 development began in 2011 to support the Risk Informed Safety Margins Characterization (RISMC) Pathway of the Light Water Reactor Sustainability (LWRS) program. The overall design goal of RELAP-7 is to take advantage of the previous thirty years of advancements in computer architecture, software design, numerical methods, and physical models in order to provide capabilities needed for the RISMC methodology and to support nuclear power safety analysis. The code is being developed based on Idaho National Laboratory’s modern scientific software development framework – MOOSE (the Multi-Physics Object-Oriented Simulation Environment). The initial development goal of the RELAP-7 approach focused primarily on the development of an implicit algorithm capable of strong (nonlinear) coupling of the dependent hydrodynamic variables contained in the 1-D/2-D flow models with the various 0-D system reactor components that compose various boiling water reactor (BWR) and pressurized water reactor nuclear power plants (NPPs). During Fiscal Year (FY) 2015, the RELAP-7 code has been further improved with expanded capability to support boiling water reactor (BWR) and pressurized water reactor NPPs analysis. The accumulator model has been developed. The code has also been coupled with other MOOSE-based applications such as neutronics code RattleSnake and fuel performance code BISON to perform multiphysics analysis. A major design requirement for the implicit algorithm in RELAP-7 is that it is capable of second-order discretization accuracy in both space and time, which eliminates the traditional first-order approximation errors. The second-order temporal is achieved by a second-order backward temporal difference, and the one-dimensional second-order accurate spatial discretization is achieved with the Galerkin approximation of Lagrange finite elements. During FY-2015, we have done numerical verification work to verify that the RELAP-7 code indeed achieves 2nd-order accuracy in both time and space for single phase models at the system level.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

RELAP-7 Pressurizer Component Development Updates

RELAP-7 is a nuclear systems safety analysis code being developed at the Idaho National Laboratory (INL). RELAP-7 development began in 2011 to support the Risk Informed Safety Margins Characterization (RISMC) Pathway of the Light Water Reactor Sustainability (LWRS) program. The overall design goal of RELAP-7 is to take advantage of the previous thirty years of advancements in computer architecture, software design, numerical methods, and physical models in order to provide capabilities needed for the RISMC methodology and to support nuclear power safety analysis. The code is being developed based on Idaho National Laboratory’s modern scientific software development framework – MOOSE (the Multi-Physics Object-Oriented Simulation Environment). The initial development goal of the RELAP-7 approach focused primarily on the development of an implicit algorithm capable of strong (nonlinear) coupling of the dependent hydrodynamic variables contained in the 1-D/2-D flow models with the various 0-D system reactor components that compose various boiling water reactor (BWR) and pressurized water reactor nuclear power plants (NPPs). As part of the efforts to expand the capability for PWR simulation, an equilibrium single-region pressurizer model has been implemented in RELAP-7. The pressurizer component can simulate pressure and water level change through insurge, spray, and heating processes. Two simple tests – one for insurge process and another for outsurge process – have been reported to demonstrate and verify the functions of the pressurizer model. The typical single-phase PWR system model presented in the first RELAP-7 milestone report has been updated, as part of system level test for the new pressurizer model. The updated PWR system model with the pressurizer component can be used for more realistic transient simulations. The addition of the equilibrium single-region pressurizer model represents the first step of developing a suite of pressurizer models with different levels of fidelities. Non-equilibrium two-region two-zone model and non-equilibrium five-region three zone model will be implemented in the near future. Cross comparison and validation will be pursued when higher fidelity pressurizer models are completed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Techno-Economic Analysis and Optimization of a Compressed-Air Energy Storage System Integrated with a Natural Gas Combined-Cycle Plant

To address the rising electricity demand and greenhouse gas concentration in the environment, considerable effort is being carried out across the globe on installing and operating renewable energy sources. However, the renewable energy production is affected by diurnal and seasonal variability. To ensure that the electric grid remains reliable and resilient even for the high penetration of renewables into the grid, various types of energy storage systems are being investigated. In this paper, a compressed-air energy storage (CAES) system integrated with a natural gas combined-cycle (NGCC) power plant is investigated where air is extracted from the gas turbine compressor or injected back into the gas turbine combustor when it is optimal to do so. First-principles dynamic models of the NGCC plant and CAES are developed along with the development of an economic model. The dynamic optimization of the integrated system is undertaken in the Python/Pyomo platform for maximizing the net present value (NPV). NPV optimization is undertaken for 14 regions/cases considering year-long locational marginal price (LMP) data with a 1 h interval. Design variables such as the storage capacity and storage pressure, as well as the operating variables such as the power plant load, air injection rate, and air extraction rate, are optimized. Results show that the integrated CAES system has a higher NPV than the NGCC-only system for all 14 regions, thus indicating the potential deployment of the integrated system under the assumption of the availability of caverns in close proximity to the NGCC plant. The levelized cost of storage is found to be in the range of 136–145 $/MWh. Roundtrip efficiency is found to be between 74.6–82.5%. A sensitivity study with respect to LMP shows that the LMP profile has a significant impact on the extent of air injection/extraction while capital expenditure reduction has a negligible effect.

25 ENERGY STORAGE↗

HIMMELI v1.0: HelsinkI Model of MEthane buiLd-up and emIssion for peatlands

Wetlands are one of the most significant natural sources of methane (CH 4 ) to the atmosphere. They emit CH 4 because decomposition of soil organic matter in waterlogged anoxic conditions produces CH 4 , in addition to carbon dioxide (CO 2 ). Production of CH 4 and how much of it escapes to the atmosphere depend on a multitude of environmental drivers. Models simulating the processes leading to CH 4 emissions are thus needed for upscaling observations to estimate present CH 4 emissions and for producing scenarios of future atmospheric CH 4 concentrations. Aiming at a CH 4 model that can be added to models describing peatland carbon cycling, we composed a model called HIMMELI that describes CH 4 build-up in and emissions from peatland soils. It is not a full peatland carbon cycle model but it requires the rate of anoxic soil respiration as input. Driven by soil temperature, leaf area index (LAI) of aerenchymatous peatland vegetation, and water table depth (WTD), it simulates the concentrations and transport of CH 4 , CO 2 , and oxygen (O 2 ) in a layered one-dimensional peat column. Here, we present the HIMMELI model structure and results of tests on the model sensitivity to the input data and to the description of the peat column (peat depth and layer thickness), and demonstrate that HIMMELI outputs realistic fluxes by comparing modeled and measured fluxes at two peatland sites. As HIMMELI describes only the CH 4 -related processes, not the full carbon cycle, our analysis revealed mechanisms and dependencies that may remain hidden when testing CH 4 models connected to complete peatland carbon models, which is usually the case. Our results indicated that (1) the model is flexible and robust and thus suitable for different environments; (2) the simulated CH 4 emissions largely depend on the prescribed rate of anoxic respiration; (3) the sensitivity of the total CH 4 emission to other input variables is mainly mediated via the concentrations of dissolved gases, in particular, the O 2 concentrations that affect the CH 4 production and oxidation rates; (4) with given input respiration, the peat column description does not significantly affect the simulated CH 4 emissions in this model version.

54 ENVIRONMENTAL SCIENCES↗

Ames Heat Pipe Experiment (AHPE) experiment description document

A gas-controlled variable-conductance heat pipe was qualified for flight aboard orbiting astronomical observatory (OAO3). Experiments were conducted to determine the performance and reliability of the pipe in the vacuum environment of space, and to demonstrate in a specific engineering application its effectiveness in providing temperature stability for spacecraft equipment which experiences varying electronic duty cycles and changing thermal boundary conditions. System design and hardware are discussed in detail.

Marcus, B. D.↗