Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Demonstration of Capture, Cooling, Tagging, and Spectroscopic Characterization of UV Photoproduct Ions in a Cryogenic Ion Trap: Application to 266 nm Photofragment Ions from Rhodamine 6G

We demonstrate a method to determine the structures of the primary photodissociation products from a cryogenically cooled parent ion. In this approach, a target ion is cooled by a pulse of buffer gas and tagged in a 20 K Paul trap. The cold ion is then photodissociated by pulsed (~5 ns) UV laser excitation, and the ionic products are trapped, cooled, and tagged by introduction of a second buffer gas pulse in the same trap. The tagged fragments are then ejected into a triple focusing, UV/vis/IR time-of-flight photofragmentation mass spectrometer which yields vibrational and electronic spectra of the mass-selected photofragments. Furthermore, these methods are demonstrated by application to the 266 nm photodissociation of the Rhodamine 6G cation to yield the R575 fragment ion based on loss of ethene as well as to a weaker secondary fragment arising from loss of m/z 43.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Twisted Diindeno‐Fused Dibenzo[ a , h ]anthracene Derivatives and their Dianions

Abstract We report a facile synthesis of diindeno‐fused dibenzo[a,h]anthracene derivatives ( DIDBA‐2Cl , DIDBA‐2Ph , and DIDBA‐2H) with different degrees of non‐planarity using three substituents (chloro, phenyl, and hydrogen) of various sizes. The planarization of their cores, as evidenced by the decreased end‐to‐end torsional angles, was confirmed by X‐ray crystallography. Their enhanced energy gaps with twisting were investigated by a combination of spectroscopic and electrochemical methods with density functional theory, which showed a transition from singlet open‐shell to closed‐shell configuration. Moreover, their doubly reduced states, DIDBA‐2Ph 2− and DIDBA‐2H 2− , were achieved by chemical reduction. The structures of dianions were identified by X‐ray crystallographic analysis, which elucidated that the electron charging further distorted the backbones. The electronic structure of the dianions was demonstrated by experimental and theoretical approaches, suggesting decreased energy gaps with larger non‐planarity, different from the neutral species.

Gu, Yanwei↗
DOE OSTI2023

Twisted Diindeno‐Fused Dibenzo[ a , h ]anthracene Derivatives and their Dianions

Abstract We report a facile synthesis of diindeno‐fused dibenzo[a,h]anthracene derivatives ( DIDBA‐2Cl , DIDBA‐2Ph , and DIDBA‐2H) with different degrees of non‐planarity using three substituents (chloro, phenyl, and hydrogen) of various sizes. The planarization of their cores, as evidenced by the decreased end‐to‐end torsional angles, was confirmed by X‐ray crystallography. Their enhanced energy gaps with twisting were investigated by a combination of spectroscopic and electrochemical methods with density functional theory, which showed a transition from singlet open‐shell to closed‐shell configuration. Moreover, their doubly reduced states, DIDBA‐2Ph 2− and DIDBA‐2H 2− , were achieved by chemical reduction. The structures of dianions were identified by X‐ray crystallographic analysis, which elucidated that the electron charging further distorted the backbones. The electronic structure of the dianions was demonstrated by experimental and theoretical approaches, suggesting decreased energy gaps with larger non‐planarity, different from the neutral species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Role of Electron Correlation beyond the Active Space in Achieving Quantitative Predictions of Spin-Phonon Relaxation

Single-molecule magnets (SMMs) are promising candidates for molecular-scale data storage and processing due to their strong magnetic anisotropy and long spin relaxation times. However, as temperature rises, interactions between electronic states and lattice vibrations accelerate spin relaxation, significantly limiting their practical applications. Recently, ab initio simulations have made it possible to advance our understanding of phonon-induced magnetic relaxation, but significant deviations from experiments have often been observed. The description of molecules’ electronic structure has been mostly based on complete active space self-consistent field (CASSCF) calculations, and the impact of electron correlation beyond the active space remains largely unexplored. In this study, we provide the first systematic investigation of spin-phonon relaxation in SMMs with post-CASSCF multiconfigurational methods, specifically CAS followed by second-order perturbation theory and multiconfiguration pair-density functional theory. Taking Co(II)- and Dy(III)-based SMMs as case studies, we analyze how electron correlation influences spin-phonon relaxation rates across a range of temperatures, comparing theoretical predictions with experimental observations. Our findings demonstrate that post-CASSCF treatments make it possible to achieve quantitative predictions for Co(II)-based SMMs. For Dy(III)-based systems, however, accurate predictions require consideration of additional effects, underscoring the urgent necessity of further advancing the study of the effects of electronic correlation in these complex systems.

Energy↗
DOE OSTI2021

Large-Scale Metasurfaces Based on Grayscale Nanosphere Lithography

Metasurfaces, based on subwavelength structuring, provide a versatile platform for wavefront manipulation in an ultrathin form factor. The manufacturing of metasurfaces, however, generally requires fabrication techniques, such as electron-beam lithography, that are not scalable. One alternative is the use of ultraviolet steppers, but these require significant capital investment and there are challenges in handling the large mask sizes that metasurfaces demand due to the structuring density. In this paper, we propose and demonstrate a novel manufacturing method based on self-assembly of nanospheres in combination with grayscale lithography. This technique enables large-scale metasurfaces with nonperiodic phase profiles while being cost-effective. As a proof of concept, we demonstrate a series of large-scale (1 mm diameter) metalenses demonstrating diffraction-limited focusing as well as holograms. This approach could open new doors to cost-effective and large-scale fabrication of a wide range of metasurface-based optics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Inverse Trans Influence and Uranium-Arene σ-Bonding Drive Molecular Geometry: Ligand Modification from Hard to Soft Flips the Oxide from Axial to Equatorial

A rare example of an equatorially bound terminal uranium(V) oxo complex in a chelating sulfur-based ligand environment, namely [(mes( Me,Ad ArS) 3 )U V (O eq )(THF)] (2), is presented. Octahedrally coordinated 2 is obtained by reaction of the mesitylene-anchored tris-thiophenolate-coordinated uranium(III) complex [U III ((SAr Ad,Me ) 3 mes)] (1) with the oxygen-atom transfer reagent N 2 O. The observed, equatorially bound oxo ligand in 2 is in stark contrast to its known tris-aryloxide analog, [(mes( Me,Ad ArO) 3 )U V (O ax )(THF)] (A), where the oxo ligand occupies the typically observed axial coordination site. Complexes 1 and 2 are characterized by single-crystal X-ray diffraction analyses and spectroscopic and magnetochemical methods, including 1 H NMR, UV/vis/NIR electronic absorption, as well as EPR spectroscopy and SQUID magnetometry, thus confirming the C S symmetry and the pentavalent oxidation state of 2. Encompassing quantum chemical calculations (DFT and CASPT2) on 2 and its tris-phenolate analog A, support and rationalize the structural and electronic differences. The molecular orbital pictures show that a stabilizing σ-bonding interaction arising from the U–O eq inverse trans influence (ITI) is present in 2 but missing in A. In 2, the sulfur 3p orbitals are closer in energy to the uranium 5f manifold than the arene π-system, leading to an ITI, while U–arene σ- or δ-bonding is not observed. Although the arene orbitals remain separated from the uranium 5f orbitals in A, the absence of an ITI allows the arene a 2u orbital to engage in a σ-type interaction with the metal. Thus, incorporating a tris-thiophenolate to an arene anchor introduces a new design concept in molecular f-element chemistry. This approach stabilizes an equatorially bound U(V) oxo center, contrasting with its tris-phenolate counterpart, where oxo coordination is axial. The observed geometric divergence, driven by competing ITI and U–arene interactions, not only tunes electronic structure but also leads to differentiated reactivity: only the phenolate analogs activate H 2 O, while the thiolates do not.

Hydrocarbons↗
DOE OSTI2026

Visualizing Millisecond Atomic Dynamics of Nanocrystals in Liquid

Atomic structures of nanomaterials are inherently dynamic and continuously reshaped through interactions with chemical species and external stimuli. Such dynamics are further amplified as the size and dimensionality of nanomaterials decrease. Despite advances in analytical methods, it remains challenging to capture the structural dynamics of nanomaterials in reactive environments with both atomic spatial resolution and commensurate temporal resolution. Here, in this study, we directly visualize atomic-scale dynamics of gold (Au) nanocrystals in reactive liquid environments with millisecond-speed liquid-cell electron microscopy (EM) and deep-learning denoising. We uncover reversible fluctuations in the local crystallinity of Au nanocrystals dependent on the surrounding chemical environment. These transient fluctuations, driven by interactions at nanocrystal–liquid interfaces, critically influence the dissolution kinetics and grain boundary relaxation. By overcoming the spatiotemporal limitations in conventional liquid-cell EM, our findings provide insights into how transient nanoscale structures dictate the stability and reactivity of nanomaterials.

Kang, Sungsu [University of Chicago, IL (United St↗
DOE OSTI2023

Emergence of competing electronic states from non-integer nuclear charges

Understanding many-electron phenomena with competing near-degenerate electronic states is of fundamental importance to chemistry and condensed matter physics. One of the most significant challenges for exploring such many-electron phenomena is the necessity for large system sizes in order to realize competing states, far beyond those practical for first-principles methods. Here, we show how allowing non-integer nuclear charges expands the space of computationally tractable electron systems that host competing electronic states. The emergence of competing electronic states from non-integer nuclear charges is exemplified in the simple 2-electron H 2 molecule and used to examine the microscopic structure of doped quasi-1D cuprate chains, showing how non-integer nuclear charges can open a window for first-principles calculations of difficult many-electron phenomena.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Nanoscale depth and lithiation dependence of V 2 O 5 band structure by cathodoluminescence spectroscopy

Vanadium pentoxide (V 2 O 5 ) is a very well-known cathode material that has attracted considerable interest for its potential use in solid-state lithium-ion batteries. We pioneer the use of depth-resolved cathodoluminescence spectroscopy (DRCLS) to monitor the changes in the electronic structure of lithiated V 2 O 5 from the free surface to the thin film bulk several hundred nm below as a function of lithiation. DRCLS measurements of V 2 O 5 interband transitions are in excellent agreement with density functional theory (DFT) calculations. The direct measure of V 2 O 5 's electronic band structure as a function of lithiation level provided by DRCLS can help inform solid-state battery designs to further withstand degradation and increase efficiency. In particular, these unique electrode measurements may reveal physical mechanisms of lithiation that change V 2 O 5 irreversibly, as well as methods to mitigate them in solid-state batteries.

25 ENERGY STORAGE↗
DOE OSTI2024

Accelerating defect predictions in semiconductors using graph neural networks

First-principles computations reliably predict the energetics of point defects in semiconductors but are constrained by the expense of using large supercells and advanced levels of theory. Machine learning models trained on computational data, especially ones that sufficiently encode defect coordination environments, can be used to accelerate defect predictions. Here, we develop a framework for the prediction and screening of native defects and functional impurities in a chemical space of group IV, III–V, and II–VI zinc blende semiconductors, powered by crystal Graph-based Neural Networks (GNNs) trained on high-throughput density functional theory (DFT) data. Using an innovative approach of sampling partially optimized defect configurations from DFT calculations, we generate one of the largest computational defect datasets to date, containing many types of vacancies, self-interstitials, anti-site substitutions, impurity interstitials and substitutions, as well as some defect complexes. We applied three types of established GNN techniques, namely crystal graph convolutional neural network, materials graph network, and Atomistic Line Graph Neural Network (ALIGNN), to rigorously train models for predicting defect formation energy (DFE) in multiple charge states and chemical potential conditions. We find that ALIGNN yields the best DFE predictions with root mean square errors around 0.3 eV, which represents a prediction accuracy of 98% given the range of values within the dataset, improving significantly on the state-of-the-art. We further show that GNN-based defective structure optimization can take us close to DFT-optimized geometries at a fraction of the cost of full DFT. The current models are based on the semi-local generalized gradient approximation-Perdew–Burke–Ernzerhof (PBE) functional but are highly promising because of the correlation of computed energetics and defect levels with higher levels of theory and experimental data, the accuracy and necessity of discovering novel metastable and low energy defect structures at the PBE level of theory before advanced methods could be applied, and the ability to train multi-fidelity models in the future with new data from non-local functionals. The DFT-GNN models enable prediction and screening across thousands of hypothetical defects based on both unoptimized and partially optimized defective structures, helping identify electronically active defects in technologically important semiconductors.

Rahman, Md Habibur (ORCID:000000027705984X)↗
DOE OSTI2024

Physical discovery in representation learning via conditioning on prior knowledge

Recent advances in electron, scanning probe, optical, and chemical imaging and spectroscopy yield bespoke data sets containing the information of structure and functionality of complex systems. In many cases, the resulting data sets are underpinned by low-dimensional simple representations encoding the factors of variability within the data. The representation learning methods seek to discover these factors of variability, ideally further connecting them with relevant physical mechanisms. However, generally, the task of identifying the latent variables corresponding to actual physical mechanisms is extremely complex. Here, we present an empirical study of an approach based on conditioning the data on the known (continuous) physical parameters and systematically compare it with the previously introduced approach based on the invariant variational autoencoders. The conditional variational autoencoder (cVAE) approach does not rely on the existence of the invariant transforms and hence allows for much greater flexibility and applicability. Interestingly, cVAE allows for limited extrapolation outside of the original domain of the conditional variable. However, this extrapolation is limited compared to the cases when true physical mechanisms are known, and the physical factor of variability can be disentangled in full. We further show that introducing the known conditioning results in the simplification of the latent distribution if the conditioning vector is correlated with the factor of variability in the data, thus allowing us to separate relevant physical factors. We initially demonstrate this approach using 1D and 2D examples on a synthetic data set and then extend it to the analysis of experimental data on ferroelectric domain dynamics visualized via piezoresponse force microscopy.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Inversion of Many-Beam Bragg Intensities for Phasing by Iterated Projections: Removal of Multiple Scattering Artifacts from Diffraction Data

An iterated projection algorithm (N-Phaser) is developed that reconstructs a scattering potential from N-beam multiple Bragg scattered intensities. The method may be used to eliminate multiple scattering artifacts from electron diffraction data, solving the phase problem and increasing the thicknesses of samples used in materials science, solid-state chemistry, and small molecule crystallography. For high-energy transmission electron diffraction, we show that the algorithm recovers accurate complex structure factors from a wide range of thicknesses, orientations, and relativistic beam energies, and does not require known thickness or atomic-resolution data if sufficient multiple scattering occurs. Furthermore, extensions to Cryo-electron microscopy and Micro-electron diffraction are suggested.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Extreme confinement of hydrogen gas within fullerenelike nanoporous carbon

Nanoporous carbons and carbon nanostructures can store hydrogen at cryogenic temperatures but lack the volumetric and gravimetric capacity to be industrially significant. Recent inelastic neutron scattering experiments suggest a highly dense phase of hydrogen at temperatures well above the melting point of solid hydrogen. However, it remains unclear how pore geometry and intermolecular interactions enable these dense phases to exist, with dispersion (van der Waals) or electrostatic/induction suggested to be the key effects in slit and curved pores but their relative contributions have yet to be quantified. In this paper, we perform benchmark electronic structure calculations allowing the interactions between planar and curved aromatic molecules with hydrogen to be accurately determined. Dispersion was found to dominate over electrostatic and inductive effects with some many-body charge transfer (Dobson type-A) effects needed to capture the most highly curved structures. Density functional methods that include type-A many-body effects were found to accurately describe the intermolecular interactions at a fraction of the cost of coupled-cluster simulations and these approaches were used to calculate the energies inside large carbon bowl and slit pores. The interaction energies inside the bowl pores were found to depend on the orientation of the hydrogen molecule. This rotational barrier, modeled as a quantum hindered rotor, could reproduce the peak splitting observed in inelastic neutron scattering experiments, with weak splitting arising from bowl-like fullerene pores and strong splitting from highly confining nanotubelike pores. Increasing the fraction of such curved pores in nanoporous carbons may therefore offer a pathway to enhance their hydrogen-storage capacity. Moreover, the preferential adsorption of ortho hydrogen on nanotubelike pores could enable the storage of high-density hydrogen without the need to remove heat produced during the ortho-para hydrogen conversion.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Method of creating structure for particle detection in time projection chambers and photodetectors

Time projection chambers are useful for high energy particle physics, nuclear physics, and astronomy. To enhance the particle detection efficiency and performance of the projection chambers functional bilayer thin film coatings based on the atomic layer deposition method are utilized. Coating material selection is based on Auger neutralization process ion induced electron emission from metallic surfaces (e.g., Mo or W) combined with a high secondary electron emission coefficient. Application of high secondary electron emission materials (e.g., MgO and CaF2) enhances the multiplication of these emitted electrons from ion induction processes. Therefore, using suitable bilayer coatings the overall TPC signal detection efficiency can be increased.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

A Dirac R-matrix calculation for the electron-impact excitation of W +

Abstract Aims : tungsten has been chosen for use as a plasma facing component in the divertor for the ITER experiment, and is currently being used on existing tokamaks such as JET. W + plays an integral role in assessing the impurity influx from plasma facing component of tokamaks and subsequent redeposition. Together with previously calculated a neutral tungsten electron-impact dataset this study allows us to determine neighbouring spectral lines in the same wavelength window of the spectrometer, and detect if there is strong blending of overlapping lines between these two ion stages as well as providing ionisation per photon ratios for both species. The new data is to be used for tungsten erosion/redeposition diagnostics. Methods : a significantly modified version of the GRASP0 atomic structure code in conjunction with DARC (Dirac Atomic R -matrix Code) are used to calculate the Einstein A coefficients and collisional rates used to generate a synthetic W II spectrum. The W II spectrum is compared against tungsten spectral emission experiments. Results : this study is used to model the spectrum of W ii , providing the predictive capability of identifying spectral lines from recent experiments. These results provide an integral part of impurity influx and redeposition determination, as the ionisation rates may be used to calculate S/XB ratios.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Inorganic Halide Perovskitoid TlPbI 3 for Ionizing Radiation Detection

Room temperature semiconductor detector (RTSD) materials for γ-ray and X-ray radiation are in great demand for the nonproliferation of nuclear materials as well as for biomedical imaging applications. Halide perovskites have attracted great attention as emerging and promising RTSD materials. In this contribution, the material synthesis, purification, crystal growth, crystal structure, photoluminescence properties, ionizing radiation detection performance, and electronic structure of the inorganic halide perovskitoid compound TlPbI 3 are reported on. This compound crystallizes in the ABX 3 non-perovskite crystal structure with a high density of d = 6.488 g·cm –3 , has a wide bandgap of 2.25 eV, and melts congruently at a low temperature of 360 °C without phase transitions, which allows for facile growth of high quality crystals with few thermally-activated defects. High-quality TlPbI 3 single crystals of centimeter-size are grown using the vertical Bridgman method using purified raw materials. A high electrical resistivity of ≈10 12 Ω·cm is readily obtainable, and detectors made of TlPbI 3 single crystals are highly photoresponsive to Ag K α X-rays (22.4 keV), and detects 122 keV γ-rays from 57 Co radiation source. The electron mobility-lifetime product µ e τ e was estimated at 1.8 × 10 –5 cm 2 ·V –1 . A high relative static dielectric constant of 35.0 indicates strong capability in screening carrier scattering and charged defects in TlPbI 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2023

Shadow energy functionals and potentials in Born–Oppenheimer molecular dynamics

In Born–Oppenheimer molecular dynamics (BOMD) simulations based on the density functional theory (DFT), the potential energy and the interatomic forces are calculated from an electronic ground state density that is determined by an iterative self-consistent field optimization procedure, which, in practice, never is fully converged. The calculated energies and forces are, therefore, only approximate, which may lead to an unphysical energy drift and instabilities. Here, we discuss an alternative shadow BOMD approach that is based on backward error analysis. Instead of calculating approximate solutions for an underlying exact regular Born–Oppenheimer potential, we do the opposite. Instead, we calculate the exact electron density, energies, and forces, but for an underlying approximate shadow Born–Oppenheimer potential energy surface. In this way, the calculated forces are conservative with respect to the approximate shadow potential and generate accurate molecular trajectories with long-term energy stabilities. We show how such shadow Born–Oppenheimer potentials can be constructed at different levels of accuracy as a function of the integration time step, δt, from the constrained minimization of a sequence of systematically improvable, but approximate, shadow energy density functionals. For each energy functional, there is a corresponding ground state Born–Oppenheimer potential. These pairs of shadow energy functionals and potentials are higher-level generalizations of the original “zeroth-level” shadow energy functionals and potentials used in extended Lagrangian BOMD. The proposed shadow energy functionals and potentials are useful only within this extended dynamical framework, where also the electronic degrees of freedom are propagated as dynamical field variables together with the atomic positions and velocities. The theory is quite general and can be applied to MD simulations using approximate DFT, Hartree–Fock, or semi-empirical methods, as well as to coarse-grained flexible charge models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Exotic bonding interactions and coexistence of chemically distinct periodic lattice distortions in the charge density wave compound TaTe2

The superstructure of TaTe 2 is examined by total high-energy x-ray scattering and large-scale structure modeling over a broad temperature range. At room temperature, it features double zigzag chains of Ta atoms exhibiting metallic bonding. The chains are sandwiched between planes of weakly interacting Te atoms. Below 170 K, the chains appear broken to “butterflylike” clusters and single zigzag chains of covalently bonded Te atoms emerge while Ta-Te interactions remain largely ionic. This is a rare example of a charge density wave compound stabilized by bonding that is a mix of covalent, ionic, and metallic character giving rise to chemically distinct periodic lattice distortions. We argue that the formation of periodic lattice distortions in the Te sublattice in addition to those in the Ta sublattice favors charge delocalization, which may explain the unusually diminished resistivity and increased magnetic susceptibility exhibited by the low-temperature charge density wave phase of TaTe 2 . The effect may be common for 5d transition metal chalcogenides containing Te because of the extended electronic orbitals of the constituent atoms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗