SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The uses of virtual environment technology in the space program are examined with emphasis on training for the Hubble Space Telescope Repair and Maintenance Mission in 1993. Project ScienceSpace at the Virtual Environment Technology Lab is discussed.
Earth based networking in support of various space agency projects has been based on leased service/circuits which has a high associated cost. This cost is almost always taken from the science side resulting in less science. This is a proposal to use Research and Education Networks (RENs) worldwide to support space flight operations in general and space-based science operations in particular. The RENs were developed to support scientific and educational endeavors. They do not provide support for general Internet traffic. The connectivity and performance of the research and education networks is superb. The connectivity at Layer 3 (IP) virtually encompasses the globe. Most third world countries and all developed countries have their own research and education networks, which are connected globally. Performance of the RENs especially in the developed countries is exceptional. Bandwidth capacity currently exists and future expansion promises that this capacity will continue. REN performance statistics has always exceeded minimum requirements for spaceflight support. Research and Education networks are more loosely managed than a corporate network but are highly managed when compared to the commodity Internet. Management of RENs on an international level is accomplished by the International Network Operations Center at Indiana University at Indianapolis. With few exceptions, each regional and national REN has its own network ops center. The acceptable use policies (AUP), although differing by country, allows any scientific program or project the use of their networks. Once in compliance with the first RENs AUP, all others will accept that specific traffic including regional and transoceanic networks. RENs can support spaceflight related scientific programs and projects. Getting the science to the researcher is obviously key to any scientific project. RENs provide a pathway to virtually any college or university in the world, as well as many governmental institutes and science centers. RENs are not to be used for mission critical types of network traffic, even though RENs performance characteristics would support it.
Implementing guidance, navigation, and control (GN&C) theory principles and applying them to the human element of project management and control is not a new concept. As both the literature on the subject and the real-world applications are neither readily available nor comprehensive with regard to how such principles might be applied, this paper has been written to educate the project manager on the "laws of physics" of his or her project (not to teach a GN&C engineer how to become a project manager) and to provide an intuitive, mathematical explanation as to the control and behavior of projects. This paper will also address how the fundamental principles of modern GN&C were applied to the National Aeronautics and Space Administration's (NASA) Constellation Program (CxP) space suit project, ensuring the project was managed within cost, schedule, and budget. A project that is akin to a physical system can be modeled and managed using the same over arching principles of GN&C that would be used if that project were a complex vehicle, a complex system(s), or complex software with time-varying processes (at times nonlinear) containing multiple data inputs of varying accuracy and a range of operating points. The classic GN&C theory approach could thus be applied to small, well-defined projects; yet when working with larger, multiyear projects necessitating multiple organizational structures, numerous external influences, and a multitude of diverse resources, modern GN&C principles are required to model and manage the project. The fundamental principles of a GN&C system incorporate these basic concepts: State, Behavior, Feedback Control, Navigation, Guidance and Planning Logic systems. The State of a system defines the aspects of the system that can change over time; e.g., position, velocity, acceleration, coordinate-based attitude, and temperature, etc. The Behavior of the system focuses more on what changes are possible within the system; this is denoted in the state of the system. The behavior of a system, as captured in the system modeling, when properly done will aid in accurately predicting future system performance. The Feedback Control system understands the state and behavior of the system and uses feedback to adjust control inputs into the system. The feedback, which is the right arm of the Control system, allows change to be affected in the overall system; it therefore is important to not only correctly identify the system feedback inputs, but also the system response to the feedback inputs. The Navigation system takes multiple data inputs and based on a priori knowledge of the inputs, develops a statistically based weighting of the inputs and measurements to determine the system's state. Guidance and Planning Logic of the system, complete with an understanding of where the system is (provided by the Navigation system), will in turn determine where the system needs to be and how to get it there. With any system/project, it is critical that the objective of the system/project be clearly defined -- not only to plan but to measure performance and to aid in guiding the system or the project. The system principles discussed above, which can be and have been applied to the current CxP space suit development project, can also be mapped to real-world constituents, thus allowing project managers to apply systems theories that are well defined in engineering and mathematics to a discipline (i.e., Project Management) that historically has been based in personal experience and intuition. This mapping of GN&C theory to Project Management will, in turn, permit a direct, methodical approach to Project Management, planning and control providing a tool to help predict (and guide) performance and an understanding of the project constraints, how the project can be controlled, and the impacts to external influences and inputs. This approach, to a project manager, flows down to the three bottom-line variables of cost, schedule, and scope ando the needed control of these three variables to successfully perform and complete a project.
For this internship, I was a part of the multi-center NextGen STEM (Science, Technology, Engineering, and Mathematics) pilot. Specifically, I worked with the Developing Commercial Crew Program (CCP) Capabilities team that focuses on human spaceflight to the space station with NASA’s commercial partners. Composed of NASA employees and contractors (who are connected to KSC, JSC, and LaRC), they work to ensure that students will experience traditional classroom content and be immersed in emerging technologies in order to explore Commercial Crew missions and launch facilities. This group is in the process of creating educational products and resources to inspire the next generation to pursue STEM and to allow educators to have access to unique and enticing STEM activities. These products include: age-appropriate classroom lessons (including activity sheets and challenges) for kindergarten through twelfth grade; a CCP app and corresponding guide; learning experiences for students as well as educators; and virtual field trips and tours using NASA-created Virtual Reality (VR) videos and a custom VR app. My particular assignment was managing the VR equipment, developing an understanding of how to maximize the use of the equipment, creating documents that explain and convey the operations and procedures concerning the equipment (including lessons learned from equipment use), and training others to utilize the equipment effectively and correctly for conference events and group demonstrations. Over the course of this internship, I helped my team outline and learn essential procedures of operation for the VR equipment, solved technology problems that arose (due to the nature of creating unique products), and encouraged audiences at KSC and various conferences to consider using the CCP VR videos in their classrooms as an opportunity to engage and challenge the next generation to pursue STEM careers.
When discussing diversity, it is important to consider the many of the types of diversity: gender diversity, racial diversity, religious diversity, cultural diversity, and diversity in abilities. The nuclear field has recently seen a surge in the diversity within the entire industry, but there is still room for the industry to grow in those areas. Where does that begin? How does that develop? When is the right time to engage the next generation of nuclear professionals? What topics should be introduced to encourage and foster excitement in the nuclear field? These questions are all certainly important but narrowing in on the topics that should be introduced might prove to be a very effective way to grow excitement in and, then, diversity in the nuclear field. Students at all socioeconomic levels should be introduced to various technical concepts that correspond to the stage and level of education that is appropriate for those students. Oftentimes there may be a speaker at a school for certain ages that will provide an overview of the nuclear industry as a whole, or perhaps even specifics on what that person does, but rarely is the interaction carried on over a long period of time and rarely do presentations for these students introduce technical concepts. Creating new, effective volunteer programs in a wide range of schools in local areas where nuclear sciences are supported would allow professionals in the nuclear field to identify and focus on students whose aptitude might lean them towards future careers in the nuclear field. This paper will focus on potential, effective ways to start these programs, and it will identify a range of technical concepts that might be considered as age-appropriate or that can be molded to fit individual schools and would, in turn, begin to develop a diverse base of students to grow and enter the nuclear field.
This project included both research and education objectives. The goal of this project was to advance innovative research and education objectives in theoretical and computational probabilistic structural analysis, reliability, and life prediction for improved reliability and safety of structural components of aerospace and aircraft propulsion systems. Research and education partners included Glenn Research Center (GRC) and Southwest Research Institute (SwRI) along with the University of Texas at San Antonio (UTSA). SwRI enhanced the NESSUS (Numerical Evaluation of Stochastic Structures Under Stress) code and provided consulting support for NESSUS-related activities at UTSA. NASA funding supported three undergraduate students, two graduate students, a summer course instructor and the Principal Investigator. Matching funds from UTSA provided for the purchase of additional equipment for the enhancement of the Advanced Interactive Computational SGI Lab established during the first year of this Partnership Award to conduct the probabilistic finite element summer courses. The research portion of this report presents the cumulation of work performed through the use of the probabilistic finite element program, NESSUS, Numerical Evaluation and Structures Under Stress, and an embedded Material Strength Degradation (MSD) model. Probabilistic structural analysis provided for quantification of uncertainties associated with the design, thus enabling increased system performance and reliability. The structure examined was a Space Shuttle Main Engine (SSME) fuel turbopump blade. The blade material analyzed was Inconel 718, since the MSD model was previously calibrated for this material. Reliability analysis encompassing the effects of high temperature and high cycle fatigue, yielded a reliability value of 0.99978 using a fully correlated random field for the blade thickness. The reliability did not change significantly for a change in distribution type except for a change in distribution from Gaussian to Weibull for the centrifugal load. The sensitivity factors determined to be most dominant were the centrifugal loading and the initial strength of the material. These two sensitivity factors were influenced most by a change in distribution type from Gaussian to Weibull. The education portion of this report describes short-term and long-term educational objectives. Such objectives serve to integrate research and education components of this project resulting in opportunities for ethnic minority students, principally Hispanic. The primary vehicle to facilitate such integration was the teaching of two probabilistic finite element method courses to undergraduate engineering students in the summers of 1998 and 1999.
The Optical Network Testbeds Workshop 2 (ONT2), held on September 12-14, 2005, was cosponsored by the Department of Energy Office of Science (DOE/SC) and the National Aeronautics and Space Administration (NASA), in cooperation with the Joint Engineering Team (JET) of the Federal Networking and Information Technology Research and Development (NITRD) Program's Large Scale Networking (LSN) Coordinating Group. The ONT2 workshop was a follow-on to an August 2004 Workshop on Optical Network Testbeds (ONT1). ONT1 recommended actions by the Federal agencies to assure timely development and implementation of optical networking technologies and infrastructure. Hosted by the NASA Ames Research Center in Mountain View, California, the ONT2 workshop brought together representatives of the U.S. advanced research and education (R&E) networks, regional optical networks (RONs), service providers, international networking organizations, and senior engineering and R&D managers from Federal agencies and national research laboratories. Its purpose was to develop a common vision of the optical network technologies, services, infrastructure, and organizations needed to enable widespread use of optical networks; recommend activities for transitioning the optical networking research community and its current infrastructure to leading-edge optical networks over the next three to five years; and present information enabling commercial network infrastructure providers to plan for and use leading-edge optical network services in that time frame.
Childhood obesity is a serious global public health concern (WHO, 2015; Wang Y & Lobstein T, 2006). Low self-esteem and related mental health problems are common in obese children (Strauss RS, 2000) as well as poor academic performance and career development (Gurley-Calvez T, 2010).Westernized dietary habits and sedentary lifestyles are identified as the major risk factors of current alarming rate of obesity along with genetic susceptibility (Popkin BM, 1999). Children in many countries, including South Korea, have become increasingly sedentary due to urbanization changes in their respective societies (Ng SW, et al. 2009, Salmon J et al. 2011). In particular, South Korea had abundant dissemination of mobile technology, such as tablet and smart phone devices. Children have become reliant on mobile devices and are less likely to perform physical activities (Do, et al, 2013). Effective and sustainable intervention programs are needed to fight the global obesity epidemic (IOM, 2012; Wang Y et al, 2013; Wang Y et al, 2015). Previous studies suggested focus on prevention strategies that begin in early childhood, a period when children establish their life habits. (Salmon J et al. 2011). Recent systematic reviews and meta-analysis including ours found that obesity prevention programs for young children have a greater intervention effect (Waters E, et al, 2011; Wang Y et al, 2013; Wang Y et al, 2015). The NASA Mission X: Train Like an Astronaut (MX) program was developed to promote children's exercise and healthy eating with excitement for training like an astronaut (Lloyd C, 2012).At present, the NASA MX Program covered 28 countries, enrolled children through their teachers in school setting (MX report 2014, 2015). This pilot study adapted the NASA MX intervention program for young children in South Korea. We assessed its feasibility and effectiveness in promoting physical activity (PA) in children and in improving parents' perspectives. We also examined the status of PA in young children. More than 80% of five-year-old children go to a Kindergarten or day care center in South Korea (MH Suh et al, 2013).Thus, reaching young children through child care and education settings could be a good approach for early childhood obesity prevention.
One of the major barriers to Concentrating Solar Power (CSP) industry growth in the U.S. is the lack of accessibility of expert knowledge, a lack of a stable workforce pipeline, and little public awareness of the technology area. Improved Resource, Training, and Education (RTE) is needed to address these gaps, to draw workers into the field from diverse technology areas and backgrounds, and to reduce the learning curves of newcomers into the industry. As part of the RTE topic under the NREL-led Heliostat Consortium (HelioCon), a public online resource database has been created to support information sharing across the heliostat and CSP community. Here, information will be presented on the existing and planned database resources, including introductory information about CSP and heliostats, a reference library of texts and publications, educational videos, a CSP power tower plant database and case studies, a contact list of component suppliers and developers, and a list of available software/metrology tools. Women+ in Concentrating Solar is a newly created organization to promote the education, professional development, and advancement of underrepresented genders in the Concentrating Solar Power (CSP) community in a way that includes diverse backgrounds, attitudes, and perspectives. The main objectives of the groups are to provide the following opportunities for underrepresented genders: 1) organize events to provide networking opportunities and community building, 2) boost partnerships and scientific collaboration, 3) create resources to facilitate knowledge and experience sharing, 4) provide mentorship programs to support those new to the industry, 5) bring visibility to underrepresented genders and attract more to the field, and 6) promote Diversity, Equity, and Inclusion (DEI) and engage minorities and underrepresented groups. Initial activities being pursued by the group include creating an expert database to support event organizers in recruiting speakers with representation of all gender identities, hosting online networking and webinar events, organizing conference events including seminars and networking/social events, and establishing a mentorship program to connect members in the CSP community across the globe. The group is open to all genders and has grown to over 60 members in its first few months.
The trends in aeronautics and aeronautical education are discussed with respect to the roles of industry, government, and the universities. The importance of the aviation industry to the economy of the country is examined. The impact of reduced enrollment of aeronautical engineering students in the universities on the future of the aeronautical industry is stressed. It is stated that the role of the government should be to sponsor and conduct basic research and advanced technology programs for civil and military aviation, and the specification, development, procurement, and operation of military aircraft. Recommendations are made for approaches which may be taken to influence more qualified students to enter the field of aeronautics.
The general objective of the Light Aerospace Alloy and Structures Technology (LA2ST) Program is to conduct interdisciplinary graduate student research on the performance of next generation, light weight aerospace alloys, composites, and associated thermal gradient structures in close collaboration with Langley researchers. Specific technical objectives are established for each research project. Relevant data and basic understanding of material behavior and microstructure, new monolithic and composite alloys, advanced processing methods, new solid and fluid mechanic analyses, measurement advances, and a pool of educated graduate students are sought.
In 1994, the Clinton Administration issued a report, 'Science in the National Interest', which identified new national science goals. Two of the five goals are related to science communications: produce the finest scientists and engineers for the 21st century, and raise scientific and technological literacy of all Americans. In addition to the guidance and goals set forth by the Administration, NASA has been mandated by Congress under the 1958 Space Act to 'provide for the widest practicable and appropriate dissemination concerning its activities and the results thereof'. In addition to addressing eight Goals and Plans which resulted from a January 1994 meeting between NASA and members of the broader scientific, education, and communications community on the Public Communication of NASA's Science, the Science Communications Working Group (SCWG) took a comprehensive look at the way the Agency communicates its science to ensure that any changes the Agency made were long-term improvements. The SCWG developed a Science Communications Strategy for NASA and a plan to implement the Strategy. This report outlines a strategy from which effective science communications programs can be developed and implemented across the agency. Guiding principles and strategic themes for the strategy are provided, with numerous recommendations for improvement discussed within the respective themes of leadership, coordination, integration, participation, leveraging, and evaluation.
This presentation will be shared at the "Securing Solar for the Grid (S2G)" workshop at RE+ 2023. It provides an overview of the work INL and Sandia have done to develop CyberStrike STORMCLOUD, a training program was designed to enhance the ability of renewable energy and operators to prepare for a cyber incident impacting industrial control systems with specific considerations of the architectures and limitations of renewable energy.
With the launch of several Earth observing satellites over the last decade, we are now in a data rich environment. From NASA's Earth Observing System (EOS) satellites alone, we are accumulating more than 3 TB per day of raw data and derived geophysical parameters. The data products are being distributed to a large user community comprising scientific researchers, educators and operational government agencies. Notable progress has been made in the last decade in facilitating access to data. However, to realize the full potential of the growing archives of valuable scientific data, further progress is necessary in the transformation of data into information, and information into knowledge that can be used in particular applications. Sponsored by NASA s Intelligent Systems Project within the Computing, Information and Communication Technology (CICT) Program, a conceptual architecture study has been conducted to examine ideas to improve data utilization through the addition of intelligence into the archives in the context of an overall knowledge building system. Potential Intelligent Archive concepts include: 1) Mining archived data holdings using Intelligent Data Understanding algorithms to improve metadata to facilitate data access and usability; 2) Building intelligence about transformations on data, information, knowledge, and accompanying services involved in a scientific enterprise; 3) Recognizing the value of results, indexing and formatting them for easy access, and delivering them to concerned individuals; 4) Interacting as a cooperative node in a web of distributed systems to perform knowledge building (i.e., the transformations from data to information to knowledge) instead of just data pipelining; and 5) Being aware of other nodes in the knowledge building system, participating in open systems interfaces and protocols for virtualization, and collaborative interoperability. This paper presents some of these concepts and identifies issues to be addressed by research in future intelligent systems technology.
The TOPEX/Poseidon program will observe ocean circulation for 3 to 5 years and monitor the effects of currents on global climate change. To communicate the results of this study to the public, this project will use printed materials, CD-ROM tutorials, a computer network, and lecturers.
This webinar is intended to educate prospective applicants on the Energy Transitions Initiative Partnership Project (ETIPP). It includes a general description of what ETIPP does, who the ETIPP partners are, the types of technical assistance ETIPP might provide communities, and what the technical assistance application process involves.
The fusion energy research and development landscape has seen significant advances in recent years, with important scientific and technological breakthroughs and a rapid rise of investment in the private sector. The workforce needs of the nascent fusion industry are growing at a rate that academic workforce development programs are not currently able to match. This paper presents the findings of the Workforce Accelerator for Fusion Energy Development Conference held in Hampton, Virginia, United States of America (USA), on 29–30 May 2024, which was funded by the National Science Foundation of the USA. A major goal of the conference was to focus on bringing public and private stakeholders together to identify opportunities for partnership in fusion research and education with the goal of meeting the needs for a talented and diverse workforce. Representatives from industry, academia, and national laboratories participated in the conference through the preparation of white papers, presentations, and group discussions, and the production of recommendations to address the challenges facing the fusion workforce in the USA.
The International Space University (ISU) 2002 Summer Session was conducted in Pomona, California, June 29-August 30, 2002. Ninety-nine professionals and students from thirty-one countries attended the Summer Session. More than half of these students participated in the Student Research Design Project entitled, "HI-STAR: Health Improvements through Space Technologies and Resources." ISU's interdisciplinary Student Research Design Projects are intended to have great educational value for the participants and, at the same time, to result in a product that will be useful to the field. The HI-STAR project was a success on both counts. The mission of the ISU students' effort on HI-STAR was to develop and promote a global strategy to help combat malaria using space technology. Like the tiny yet powerful mosquito, HI-STAR is a small program that aspires to make a difference. Timely detection of malaria danger zones is essential to help health authorities and policy makers make decisions about how to manage limited resources for combating malaria. In 2001, the technical support network for prevention and control of malaria epidemics published a study called "Malaria Early Warning Systems: Concepts, Indicators and Partners." This study, funded by Roll Back Malaria, a World Health Organization initiative, offered a framework for a monitoring and early warning system. HI-STAR seeks to build on this proposal and enhance the space elements of the suggested framework. Malaria disease dynamics and distributions are related to environmental variables. From space, environmental conditions that support the growth of mosquito populations can be monitored, Malaria-specific information can be gathered from satellite-borne remote sensing instruments and ground-based sensors. This information can be integrated via geographic information systems (GIS) into a Malaria Information System (MIS) that can provide assessment analyses and risk maps as output. HI-STAR defines and suggests the development of an active MIS as a low-cost tool to help organizations plan their efforts to fight malaria.