Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “computer programming integrity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

A generalized computer code for developing dynamic gas turbine engine models (DIGTEM)

This paper describes DIGTEM (digital turbofan engine model), a computer program that simulates two spool, two stream (turbofan) engines. DIGTEM was developed to support the development of a real time multiprocessor based engine simulator being designed at the Lewis Research Center. The turbofan engine model in DIGTEM contains steady state performance maps for all the components and has control volumes where continuity and energy balances are maintained. Rotor dynamics and duct momentum dynamics are also included. DIGTEM features an implicit integration scheme for integrating stiff systems and trims the model equations to match a prescribed design point by calculating correction coefficients that balance out the dynamic equations. It uses the same coefficients at off design points and iterates to a balanced engine condition. Transients are generated by defining the engine inputs as functions of time in a user written subroutine (TMRSP). Closed loop controls can also be simulated. DIGTEM is generalized in the aerothermodynamic treatment of components. This feature, along with DIGTEM's trimming at a design point, make it a very useful tool for developing a model of a specific turbofan engine.

Daniele, C. J.↗

Highly integrated digital engine control system on an F-15 airplane

The Highly Integrated Digital Electronic Control (HIDEC) program will demonstrate and evaluate the improvements in performance and mission effectiveness that result from integrated engine/airframe control systems. This system is being used on the F-15 airplane. An integrated flightpath management mode and an integrated adaptive engine stall margin mode are implemented into the system. The adaptive stall margin mode is a highly integrated mode in which the airplane flight conditions, the resulting inlet distortion, and the engine stall margin are continuously computed; the excess stall margin is used to uptrim the engine for more thrust. The integrated flightpath management mode optimizes the flightpath and throttle setting to reach a desired flight condition. The increase in thrust and the improvement in airplane performance is discussed.

Burcham, F. W., Jr.↗

A generalized computer code for developing dynamic gas turbine engine models (DIGTEM)

This paper describes DIGTEM (digital turbofan engine model), a computer program that simulates two spool, two stream (turbofan) engines. DIGTEM was developed to support the development of a real time multiprocessor based engine simulator being designed at the Lewis Research Center. The turbofan engine model in DIGTEM contains steady state performance maps for all the components and has control volumes where continuity and energy balances are maintained. Rotor dynamics and duct momentum dynamics are also included. DIGTEM features an implicit integration scheme for integrating stiff systems and trims the model equations to match a prescribed design point by calculating correction coefficients that balance out the dynamic equations. It uses the same coefficients at off design points and iterates to a balanced engine condition. Transients are generated by defining the engine inputs as functions of time in a user written subroutine (TMRSP). Closed loop controls can also be simulated. DIGTEM is generalized in the aerothermodynamic treatment of components. This feature, along with DIGTEM's trimming at a design point, make it a very useful tool for developing a model of a specific turbofan engine.

Daniele, C. J.↗

Equations of motion of slung load systems with results for dual lift

General simulation equations are derived for the rigid body motion of slung load systems. These systems are viewed as consisting of several rigid bodies connected by straight-line cables or links. The suspension can be assumed to be elastic or inelastic, both cases being of interest in simulation and control studies. Equations for the general system are obtained via D'Alembert's principle and the introduction of generalized velocity coordinates. Three forms are obtained. Two of these generalize previous case-specific results for single helicopter systems with elastic or inelastic suspensions. The third is a new formulation for inelastic suspensions. It is derived from the elastic suspension equations by choosing the generalized coordinates so as to separate motion due to cable stretching from motion with invariant cable lengths. The result is computationally more efficient than the conventional formulation, and is readily integrated with the elastic suspension formulation and readily applied to the complex dual lift and multilift systems. Equations are derived for dual lift systems. Three proposed suspension arrangements can be integrated in a single equation set. The equations are given in terms of the natural vectors and matrices of three-dimensional rigid body mechanics and are tractable for both analysis and programming.

Cicolani, Luigi S.↗

System For Research On Multiple-Arm Robots

Kali system of computer programs and equipment provides environment for research on distributed programming and distributed control of coordinated-multiple-arm robots. Suitable for telerobotics research involving sensing and execution of low level tasks. Software and configuration of hardware designed flexible so system modified easily to test various concepts in control and programming of robots, including multiple-arm control, redundant-arm control, shared control, traded control, force control, force/position hybrid control, design and integration of sensors, teleoperation, task-space description and control, methods of adaptive control, control of flexible arms, and human factors.

Backes, Paul G.↗

Paving the way for space gardens

The Ecological Life Support System, a plant growth experiment now in its third year of closed chamber production at the NASA Kennedy Space Center, is discussed. Possible spin-off applications of hydrophonics experiments are noted. It is projected that long-term goals will include the integration of this garden system into the process of waste recycling for fertilization, air refreshment, and potable water recovery in a closed environment. The Biomass Production Chamber, a two-story bubble-shape steel biosphere modified from a Mercury/Gemini program attitude chamber provides a usable volume of 7.3 m x 3.6 m in diameter containing growing racks, piping for nutrient solutions, specialized lighting and sensors that provide information to the computers controlling the chamber and its functions. Computer programs provide highly sensitive monitoring and regulation of the system. Crops successfully harvested to date include dwarf wheat, lettuce, and soybeans.

Phillips, Patricia↗

Adaptation of a Control Center Development Environment for Industrial Process Control

In the control center, raw telemetry data is received for storage, display, and analysis. This raw data must be combined and manipulated in various ways by mathematical computations to facilitate analysis, provide diversified fault detection mechanisms, and enhance display readability. A development tool called the Graphical Computation Builder (GCB) has been implemented which provides flight controllers with the capability to implement computations for use in the control center. The GCB provides a language that contains both general programming constructs and language elements specifically tailored for the control center environment. The GCB concept allows staff who are not skilled in computer programming to author and maintain computer programs. The GCB user is isolated from the details of external subsystem interfaces and has access to high-level functions such as matrix operators, trigonometric functions, and unit conversion macros. The GCB provides a high level of feedback during computation development that improves upon the often cryptic errors produced by computer language compilers. An equivalent need can be identified in the industrial data acquisition and process control domain: that of an integrated graphical development tool tailored to the application to hide the operating system, computer language, and data acquisition interface details. The GCB features a modular design which makes it suitable for technology transfer without significant rework. Control center-specific language elements can be replaced by elements specific to industrial process control.

Killough, Ronnie L.↗

A Thermal Management Systems Model for the NASA GTX RBCC Concept

The Vehicle Integrated Thermal Management Analysis Code (VITMAC) was further developed to aid the analysis, design, and optimization of propellant and thermal management concepts for advanced propulsion systems. The computational tool is based on engineering level principles and models. A graphical user interface (GUI) provides a simple and straightforward method to assess and evaluate multiple concepts before undertaking more rigorous analysis of candidate systems. The tool incorporates the Chemical Equilibrium and Applications (CEA) program and the RJPA code to permit heat transfer analysis of both rocket and air breathing propulsion systems. Key parts of the code have been validated with experimental data. The tool was specifically tailored to analyze rocket-based combined-cycle (RBCC) propulsion systems being considered for space transportation applications. This report describes the computational tool and its development and verification for NASA GTX RBCC propulsion system applications.

Traci, Richard M.↗

NASA Tech Briefs, March 2005

Topics covered include: Scheme for Entering Binary Data Into a Quantum Computer; Encryption for Remote Control via Internet or Intranet; Coupled Receiver/Decoders for Low-Rate Turbo Codes; Processing GPS Occultation Data To Characterize Atmosphere; Displacing Unpredictable Nulls in Antenna Radiation Patterns; Integrated Pointing and Signal Detector for Optical Receiver; Adaptive Thresholding and Parameter Estimation for PPM; Data-Driven Software Framework for Web-Based ISS Telescience; Software for Secondary-School Learning About Robotics; Fuzzy Logic Engine; Telephone-Directory Program; Simulating a Direction-Finder Search for an ELT; Formulating Precursors for Coating Metals and Ceramics; Making Macroscopic Assemblies of Aligned Carbon Nanotubes; Ball Bearings Equipped for In Situ Lubrication on Demand; Synthetic Bursae for Robots; Robot Forearm and Dexterous Hand; Making a Metal-Lined Composite-Overwrapped Pressure Vessel; Ex Vivo Growth of Bioengineered Ligaments and Other Tissues; Stroboscopic Goggles for Reduction of Motion Sickness; Articulating Support for Horizontal Resistive Exercise; Modified Penning-Malmberg Trap for Storing Antiprotons; Tumbleweed Rovers; Two-Photon Fluorescence Microscope for Microgravity Research; Biased Randomized Algorithm for Fast Model-Based Diagnosis; Fast Algorithms for Model-Based Diagnosis; Simulations of Evaporating Multicomponent Fuel Drops; Formation Flying of Tethered and Nontethered Spacecraft; and Two Methods for Efficient Solution of the Hitting- Set Problem.

Source record↗

Comparing and Integrating Constraint Programming and Temporal Planning for Quantum Circuit Compilation

Recently, the makespan-minimization problem of compiling a general class of quantum algorithms into near-term quantum processors has been introduced to the AI community. The research demonstrated that temporal planning is a strong solution approach for the studied class of quantum circuit compilation (QCC) problems. In this paper, we explore the use of methods from operations research, specifically constraint programming (CP), as an alternative and complementary approach to temporal planning. We also extend previous work by introducing two new problem variations that incorporate important characteristics identified by the quantum computing community. We apply temporal planning and CP to the baseline and extended QCC problems as both stand-alone and hybrid approaches. The hybrid method uses solutions found by temporal planning to warm-start CP, leveraging the ability of temporal planning to find satisficing solutions to problems with a high degree of task optionality, an area that CP typically struggles with. These solutions are then used to seed the CP formulation which significantly benefits from inferred bounds on planning horizon and task counts provided by the warm-start. Our extensive empirical evaluation indicates that while stand-alone CP is not competitive with temporal planning, except for the smallest problems, CP in a hybrid setting is beneficial for all temporal planners in all problem classes.

quantum circuit compilation↗

An Integrated Recursive Framework for Arbitrarily Multiscale and Multi-fidelity Modeling

The NASA Multiscale Analysis Tool (NAMSAT) serves as a state-of-the-art, “plug and play,” massively multiscale modeling (M3) platform for hierarchical materials and structures. The development of NASMAT has focused on modularity, upgradability and maintainability, interoperability, and utility. Application Program Interfaces (APIs) have been developed to facilitate the integration NASMAT into other programs (commercial, research, and user-defined) as well as the integration of other codes into NASMAT. NASMAT is an integrated, recursive platform that seamlessly allows for an arbitrary number of scales, and a variety of modeling fidelity, in a single, non-linear analysis. Thus, the macroscopic response of a material can be directly linked to the behavior of the microstructure(s), including subscale defects, making it a suitable tool for integrated computational materials engineering (ICME) because . Examples using NASMAT for simulation of polycrystalline metals at elevated temperatures will be presented.

Multiscale Modeling↗

Integrating planning and reactive control

Artificial intelligence research on planning is concerned with designing control systems that choose actions by manipulating explicit descriptions of the world state, the goal to be achieved, and the effects of elementary operations available to the system. Because planning shifts much of the burden of reasoning to the machine, it holds great appeal as a high-level programming method. Experience shows, however, that it cannot be used indiscriminately because even moderately rich languages for describing goals, states, and the elementary operators lead to computational inefficiencies that render the approach unsuitable for realistic applications. This inadequacy has spawned a recent wave of research on reactive control or situated activity in which control systems are modeled as reacting directly to the current situation rather than as reasoning about the future effects of alternative action sequences. While this research has confronted the issue of run-time tractability head on, in many cases it has done so by sacrificing the advantages of declarative planning techniques. Ways in which the two approaches can be unified are discussed. The authors begin by modeling reactive control systems as state machines that map a stream of sensory inputs to a stream of control outputs. These machines can be decomposed into two continuously active subsystems: the planner and the execution module. The planner computes a plan, which can be seen as a set of bits that control the behavior of the execution module. An important element of this work is the formulation of a precise semantic interpretation for the inputs and outputs of the planning system. They show that the distinction between planned and reactive behavior is largely in the eye of the beholder: systems that seem to compute explicit plans can be redescribed in situation-action terms and vice versa. They also discuss practical programming techniques that allow the advantages of declarative programming and guaranteed reactive response to be achieved simultaneously.

Rosenschein, Stanley J.↗

NASA Briefing for Unidata

The NASA representative to the Unidata Strategic Committee presented a semiannual update on NASAs work with and use of Unidata technologies. The talk covered the program of cloud computing prototypes being undertaken for the Earth Observing System Data and Information System (EOSDIS). Also discussed were dataset interoperability recommendations ratified via the EOSDIS Standards Office and the HDF Product Designer tool with respect to its possible applicability to data in network Common Data Form (NetCDF) version 4.

data integration↗

NASA Update for Unidata Stratcomm

The NASA representative to the Unidata Strategic Committee presented a semiannual update on NASAs work with and use of Unidata technologies. The talk updated Unidata on the program of cloud computing prototypes underway for the Earth Observing System Data and Information System (EOSDIS). Also discussed was a trade study on the use of the Open source Project for a Network Data Access Protocol (OPeNDAP) with Web Object Storage in the cloud.

data systems↗

The development of a noncryogenic nitrogen/oxygen supply technique

A development program was conducted in two phases to define the characteristics and requirements of an electrochemical oxygen/nitrogen supply technique for space station application. In Phase 1, electrode formulations and structures suitable for use as anodes in an oxygen/nitrogen generator were experimentally investigated. A one-man model oxygen/nitrogen generator integrated with a space cabin atmosphere simulator was fabricated and successfully tested in Phase 2. Data from these tests were used to update a computer routine model of the cabin atmosphere control using the oxygen/nitrogen generator technique. A specification and preliminary design for a 12-man oxygen/ nitrogen generation system was prepared.

Greenough, B. M.↗

Controls and guidance: Space

The Space Controls and Guidance Research and Technology Program is directed toward enabling the next generation of space transportation systems, large future spacecraft, and space systems such as the Space Station to have large communication antennas and high precision segmented reflector astrophysical telescopes. The new generation of transportation vehicles has demanding requirements to provide for an order of magnitude reduction in cost as well as an increase in capability. The future orbital facilities have demanding control requirements for pointing and stabilization, momentum management, build-up and growth accomodation, and disturbance management. To address these advanced requirements, the research and development program is designed to provide the generic technology base to support the implementation of advanced guidance, navigation, and control. The area of computational controls will be stressed in order to develop cost effective, high speed, high fidelity control system simulation and analysis and synthesis tools. The trust of this work will be to develop methods and software to enable analysis and real-time hardware-in-the-loop simulation of complex spacecraft for control design certification. To address future orbital facilities requirements, an advanced technology program is underway in system identification, distributed control, integrated controls/structures design methods, and advanced sensors and actuators. Because the behavior of large, light weight per unit area deployable/assembled spacecraft is greatly influenced by the ground environment, the testing and verification activity is both ground- and space-based.

Dibattista, John D.↗

A methodology to emulate and evaluate a productive virtual workstation

The Advanced Display and Computer Augmented Control (ADCACS) Program at ACT is sponsored by NASA Ames to investigate the broad field of technologies which must be combined to design a 'virtual' workstation for the Space Station Freedom. This program is progressing in several areas and resulted in the definition of requirements for a workstation. A unique combination of technologies at the ACT Laboratory have been networked to effectively create an experimental environment. This experimental environment allows the integration of nonconventional input devices with a high power graphics engine within the framework of an expert system shell which coordinates the heterogeneous inputs with the 'virtual' presentation. The flexibility of the workstation is evolved as experiments are designed and conducted to evaluate the condition descriptions and rule sets of the expert system shell and its effectiveness in driving the graphics engine. Workstation productivity has been defined by the achievable performance in the emulator of the calibrated 'sensitivity' of input devices, the graphics presentation, the possible optical enhancements to achieve a wide field of view color image and the flexibility of conditional descriptions in the expert system shell in adapting to prototype problems.

Krubsack, David↗

PC-based Digital Acoustic Control System (DACS)

The PC-based Digital Acoustic Control System (DACS), which is a closed-loop system capable of precisely controlling the spectrum in real-time mode, is discussed. The system is based on integrated facility hardware including control microphones, signal conditioners, a real-time analyzer (RTA), a shaper, high capacity power amplifiers, and acoustic horns and generators. The DACS provides both an improved spectrum simulation and realtime information of pertinent test parameters that are stored in five separate files. These files can be hard copied and/or transferred to other programs to obtain a specific format of the test data. It is demonstrated that the computer interface with digital RTA and programmable filters are most effective and efficient. This facility runs independently under the control of a computer with an IEEE-488 interface to the facility hardware.

Shah, Kamlesh C.↗