Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “boosting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

On the importance of minimizing “coast-time” in x-ray driven inertially confined fusion implosions

By the time an inertially confined fusion (ICF) implosion has converged a factor of 20, its surface area has shrunk 400×, making it an inefficient x-ray energy absorber. So, ICF implosions are traditionally designed to have the laser drive shut off at a time, toff, well before bang-time, tBT, for a coast-time of tcoast=tBT−toff>1 ns. High-foot implosions on NIF showed a strong dependence of many key ICF performance quantities on reduced coast-time (by extending the duration of laser power after the peak power is first reached), most notably stagnation pressure and fusion yield. Herein we show that the ablation pressure, pabl, which drives high-foot implosions, is essentially triangular in temporal shape, and that reducing tcoast boosts pabl by as much as ∼2× prior to stagnation thus increasing fuel and hot-spot compression and implosion speed. One-dimensional simulations are used to track hydrodynamic characteristics for implosions with various coast-times and various assumed rates of hohlraum cooling after toff to illustrate how the late-time conditions exterior to the implosion can impact the fusion performance. A simple rocket model-like analytic theory demonstrates that reducing coast-time can lead to a ∼15% higher implosion velocity because the reduction in x-ray absorption efficiency at late-time is somewhat compensated by small (∼5%−10%) ablator mass remaining. Together with the increased ablation pressure, the additional implosion speed for short coast-time implosions can boost the stagnation pressure by ∼2× as compared to a longer coast-time version of the same implosion. Four key dimensionless parameters are identified and we find that reducing coast-time to as little as 500 ps still provides some benefit. Finally, we show how the high-foot implosion data is consistent with the above mentioned picture.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Approaching a burning plasma on the NIF

The locus of National Ignition Facility (NIF) inertial confinement fusion (ICF) implosion data, in hot-spot burn-average areal density (ρR) and Brysk temperature (T) space, is shown here and illustrates that several implosions are nearing a burning plasma state, where α-heating is the dominant source of plasma heating. A formula for diagnosing a burning plasma using measured/inferred data from ICF implosion experiments is given with the underlying derivation. Plotting ICF implosion performance against inferred hot-spot energy illustrates the key need to maximize the delivery of energy to an implosion hot-spot. A very compact analytical equation for α-heating is given, which shows that fundamentally, α-heating provides a discrete “boost” to p V γ of an implosion hot-spot. It is then shown numerically that the analytical expression for the amplification of p V γ is simply related to yield amplification and to other more famous metrics used for inferring yield amplification in experiments. Interestingly, the argument of the p V γ boost equation appears to provide a fundamental ignition condition that implicitly includes the effects of asymmetry, and it also exposes the origin of why there is uncertainty in defining single ignition criteria. The resulting analysis of NIF implosion data indicates that an increase in burn-average hot-spot temperature will be needed in order to ignite, and the strategy being pursued to achieve this goal is outlined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Predictive understanding of the surface tension and velocity of sound in ionic liquids using machine learning

Knowledge of the physical properties of ionic liquids (ILs), such as the surface tension and speed of sound, is important for both industrial and research applications. Unfortunately, technical challenges and costs limit exhaustive experimental screening efforts of ILs for these critical properties. Previous work has demonstrated that the use of quantum-mechanics-based thermochemical property prediction tools, such as the conductor-like screening model for real solvents, when combined with machine learning (ML) approaches, may provide an alternative pathway to guide the rapid screening and design of ILs for desired physiochemical properties. However, the question of which machine-learning approaches are most appropriate remains. In the present study, we examine how different ML architectures, ranging from tree-based approaches to feed-forward artificial neural networks, perform in generating nonlinear multivariate quantitative structure–property relationship models for the prediction of the temperature- and pressure-dependent surface tension of and speed of sound in ILs over a wide range of surface tensions (16.9–76.2 mN/m) and speeds of sound (1009.7–1992 m/s). The ML models are further interrogated using the powerful interpretation method, shapley additive explanations. We find that several different ML models provide high accuracy, according to traditional statistical metrics. The decision tree-based approaches appear to be the most accurate and precise, with extreme gradient-boosting trees and gradient-boosting trees being the best performers. However, our results also indicate that the promise of using machine-learning to gain deep insights into the underlying physics driving structure–property relationships in ILs may still be somewhat premature.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Power scalable semiconductor disk lasers for frequency conversion and mode-locking

The semiconductor disk laser, a relatively novel type of light oscillators, is now under intensive development. These lasers produce an excellent beam quality in conjunction with a scalable output power. This paper presents recent achievements in power scalability, mode-locking and frequency conversion with optically-pumped semiconductor disk lasers. A novel concept for power scaling described here allows the thermal load of the gain material to be reduced, increasing the threshold of rollover and extending the capability for boosting the output power without degradation in the beam quality. The proposed technique is based on the multiple gain scheme. The total power of over 8 W was achieved in dual-gain configuration, while one-gain lasers could produce separately up to 4 W, limited by the thermal rollover of the output characteristics. The results show that the reduced thermal load to a gain element in a dual-gain cavity allows extending the range of usable pump powers boosting the laser output. Orange-red radiation required for a number of challenging applications can be produced through frequency-doubling using a GaInNAs/GaAs laser. Using such a disk laser operating at a fundamental wavelength of 1224 nm, we demonstrate an output power of 2.68 W in the visible region with an optical-to-optical conversion efficiency of 7.4%. The frequency-converted signal could be launched into a single-mode optical fibre with 70%-78% coupling efficiency, demonstrating good beam quality for the visible radiation. Using a Fabry-Perot glass etalon, the emission wavelength could be tuned over an 8-nm spectral range. We report on optically-pumped disk lasers passively mode-locked with a semiconductor saturable-absorber mirror. The potential of harmonic mode-locking in producing pulse trains at multigigahertz repetition rates has been explored. The mode-locked disk laser is investigated for different designs of the gain medium that allow bistable mode-locking to be controlled. An explanation for hysteresis of mode-locking is given based on a laser model including saturable absorption and unsaturated gain in a semiconductor oscillator operating in pulsed regime. (invited paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ultraefficient thermophotovoltaic power conversion by band-edge spectral filtering

Thermophotovoltaic power conversion utilizes thermal radiation from a local heat source to generate electricity in a photovoltaic cell. It was shown in recent years that the addition of a highly reflective rear mirror to a solar cell maximizes the extraction of luminescence. This, in turn, boosts the voltage, enabling the creation of record-breaking solar efficiency. Now we report that the rear mirror can be used to create thermophotovoltaic systems with unprecedented high thermophotovoltaic efficiency. This mirror reflects low-energy infrared photons back into the heat source, recovering their energy. Therefore, the rear mirror serves a dual function; boosting the voltage and reusing infrared thermal photons. This allows the possibility of a practical >50% efficient thermophotovoltaic system. Based on this reflective rear mirror concept, we report a thermophotovoltaic efficiency of 29.1 ± 0.4% at an emitter temperature of 1,207 °C.

14 SOLAR ENERGY↗

Climate-Driven Divergence in Biophysical and Economic Impacts of Agrivoltaics

Increasing global demands for food and energy necessitate innovative land-use solutions. Agrivoltaics, colocating solar photovoltaics with agriculture, shows promise, but its widespread adoption faces complex biophysical and economic trade-offs in a changing climate. Here, we develop an integrated biophysical-economic modeling framework to quantify how agrivoltaics affect biophysical and economic impacts across the Midwestern United States under both current and project climate conditions. We find strong regional divergences driven by climate gradients. In the humid eastern Midwest, solar panel shading limits photosynthesis, leading to reduced yields (maize -24%; soybean -16%) and lower farmers' profitability (maize -16%; soybean -2%) compared to conventional agriculture. Conversely, in the semiarid western region, shading alleviates heat and water stress, moderating yield reductions for maize (-12%) and even boosting soybean yields (+6%), resulting in improved economic returns (-6% for maize; +9% for soybean), for a scenario with 33% photovoltaic ground coverage ratio. Although agrivoltaics generate substantial electrical energy across all regions, high upfront installation costs challenge solar developers compared to standalone solar photovoltaics. However, our analysis identifies “win-win” opportunities where soybean-based agrivoltaics in the semiarid region produce economic benefits for both farmers and solar developers, highlighting the necessity for region-specific designs tailored to local climate conditions. Critically, future climate projections indicate eastward expansion of semiarid conditions, broadening areas where agrivoltaics can mitigate crop yield penalties (even boosting yield) and improve overall profitability, especially under high-emission scenarios. The results provide a mechanistic and economically integrated understanding essential for developing evidence-based and region-specific strategies to scale agrivoltaics in a changing climate.

14 SOLAR ENERGY↗

Modeling freight mode choice using machine learning classifiers: a comparative study using Commodity Flow Survey (CFS) data

This study explores the usefulness of machine learning classifiers for modeling freight mode choice. We investigate eight commonly used machine learning classifiers, namely Naïve Bayes, Support Vector Machine, Artificial Neural Network, K-Nearest Neighbors, Classification and Regression Tree, Random Forest, Boosting and Bagging, along with the classical Multinomial Logit model. US 2012 Commodity Flow Survey data are used as the primary data source; we augment it with spatial attributes from secondary data sources. The performance of the classifiers is compared based on prediction accuracy results. The current research also examines the role of sample size and training-testing data split ratios on the predictive ability of the various approaches. In addition, the importance of variables is estimated to determine how the variables influence freight mode choice. The results show that the tree-based ensemble classifiers perform the best. Specifically, Random Forest produces the most accurate predictions, closely followed by Boosting and Bagging. With regard to variable importance, shipment characteristics, such as shipment distance, industry classification of the shipper and shipment size, are the most significant factors for freight mode choice decisions.

42 ENGINEERING↗

A CONNECTION BETWEEN APPARENT VLBA JET SPEEDS AND INITIAL ACTIVE GALACTIC NUCLEUS DETECTIONS MADE BY THE FERMI GAMMA-RAY OBSERVATORY

In its first three months of operations, the Fermi Gamma-Ray Observatory has detected approximately one quarter of the radio-flux-limited MOJAVE sample of bright flat-spectrum active galactic nuclei (AGNs) at energies above 100 MeV. We have investigated the apparent parsec-scale jet speeds of 26 MOJAVE AGNs measured by the Very Long Baseline Array (VLBA) that are in the LAT bright AGN sample (LBAS). We find that the {gamma}-ray bright quasars have faster jets on average than the non-LBAS quasars, with a median of 15c, and values ranging up to 34c. The LBAS AGNs in which the LAT has detected significant {gamma}-ray flux variability generally have faster jets than the nonvariable ones. These findings are in overall agreement with earlier results based on nonuniform EGRET data which suggested that {gamma}-ray bright AGNs have preferentially higher Doppler boosting factors than other blazar jets. However, the relatively low LAT detection rates for the full MOJAVE sample (24%) and previously known MOJAVE EGRET-detected blazars (43%) imply that Doppler boosting is not the sole factor that determines whether a particular AGN is bright at {gamma}-ray energies. The slower apparent jet speeds of LBAS BL Lac objects and their higher overall LAT detection rate as compared to quasars suggest that the former are being detected by Fermi because of their higher intrinsic (unbeamed) {gamma}-ray to radio luminosity ratios.

79 ASTRONOMY AND ASTROPHYSICS↗

GLOBAL STAR FORMATION REVISITED

A general treatment of disk star formation is developed from a dissipative multiphase model, with the dominant dissipation due to cloud collisions. The Schmidt-Kennicutt (SK) law emerges naturally for star-forming disks and starbursts. We predict that there should be an inverse correlation between Tully-Fisher law and SK law residuals. The model is extended to include a multiphase treatment of supernova feedback that leads to a turbulent pressure-regulated generalization of the star formation law and is applicable to gas-rich starbursts. Enhanced pressure, as expected in merger-induced star formation, enhances star formation efficiency. An upper limit is derived for the disk star formation rate in starbursts that depends on the ratio of global ISM to cloud pressures. We extend these considerations to the case where the interstellar gas pressure in the inner galaxy is dominated by outflows from a central active galactic nucleus (AGN). During massive spheroid formation, AGN-driven winds trigger star formation, resulting in enhanced supernova feedback and outflows. The outflows are comparable to the AGN-boosted star formation rate and saturate in the super-Eddington limit. Downsizing of both SMBH and spheroids is a consequence of AGN-driven positive feedback. Bondi accretion feeds the central black hole with a specific accretion rate that is proportional to the black hole mass. AGN-enhanced star formation is mediated by turbulent pressure and relates spheroid star formation rate to black hole accretion rate. The relation between black hole mass and spheroid velocity dispersion has a coefficient (Salpeter time to gas consumption time ratio) that provides an arrow of time. Highly efficient, AGN-boosted star formation can occur at high redshift.

99 GENERAL AND MISCELLANEOUS↗

FERMI-LAT SENSITIVITY TO DARK MATTER ANNIHILATION IN VIA LACTEA II SUBSTRUCTURE

We present a study of the ability of the Fermi Gamma-ray Space Telescope to detect dark matter (DM) annihilation signals from the Galactic subhalos predicted by the Via Lactea II N-body simulation. We implement an improved formalism for estimating the boost factor needed to account for the effect of DM clumping on scales below the resolution of the simulation, and we incorporate a detailed Monte Carlo simulation of the response of the Fermi-LAT, including a simulation of its all-sky observing mode integrated over a 10 year mission. We find that for WIMP masses up to about 150 GeV c {sup -2} in standard supersymmetric models with ({sigma}v) = 3 x 10{sup -26} cm{sup 3} s{sup -1}, a few subhalos could be detectable with >5 standard deviation significance and would likely deviate significantly from the appearance of a point source.

79 ASTRONOMY AND ASTROPHYSICS↗

STRUCTURE AND MAGNETIC FIELDS IN THE PRECESSING JET SYSTEM SS 433. II. INTRINSIC BRIGHTNESS OF THE JETS

Deep Very Large Array imaging of the binary X-ray source SS 433, also classified as a microquasar, has been used to study the intrinsic brightness distribution and evolution of its radio jets. The intrinsic brightness of the jets as a function of age at emission of the jet material {tau} is recovered by removal of the Doppler boosting and projection effects. We find that, intrinsically, the two jets are remarkably similar when compared for equal {tau}, and that they are best described by Doppler boosting of the form D {sup 2+{alpha}}, as expected for continuous jets. The intrinsic brightnesses of the jets as functions of age behave in complex ways. In the age range 60 days < {tau} < 150 days, the jet decays are best represented by exponential functions of {tau}, but linear or power-law functions are not statistically excluded. This is followed by a region out to {tau} {approx_equal} 250 days during which the intrinsic brightness is essentially constant. At later times, the jet decay can be fit roughly as exponential or power-law functions of {tau}.

79 ASTRONOMY AND ASTROPHYSICS↗

FERMI GAMMA-RAY HAZE VIA DARK MATTER AND MILLISECOND PULSARS

We study possible astrophysical and dark matter (DM) explanations for the Fermi gamma-ray haze in the Milky Way halo. As representatives of various DM models, we consider DM particles annihilating into W {sup +} W {sup -}, b b-bar , and e {sup +} e {sup -}. In the first two cases, the prompt gamma-ray emission from DM annihilations is significant or even dominant at E > 10 GeV, while inverse Compton scattering (ICS) from annihilating DM products is insignificant. For the e {sup +} e {sup -} annihilation mode, we require a boost factor of order 100 to get significant contribution to the gamma-ray haze from ICS photons. Possible astrophysical sources of high-energy particles at high latitudes include type Ia supernovae (SNe) and millisecond pulsars (MSPs). Based on our current understanding of Ia SNe rates, they do not contribute significantly to gamma-ray flux in the halo of the Milky Way. As the MSP population in the stellar halo of the Milky Way is not well constrained, MSPs may be a viable source of gamma-rays at high latitudes provided that there are {approx}(2-6) x 10{sup 4} of MSPs in the Milky Way stellar halo. In this case, pulsed gamma-ray emission from MSPs can contribute to gamma rays around few GeV, while the ICS photons from MSP electrons and positrons may be significant at all energies in the gamma-ray haze. The plausibility of such a population of MSPs is discussed. Consistency with the Wilkinson Microwave Anisotropy Probe (WMAP) microwave haze requires that either a significant fraction of MSP spin-down energy is converted into e {sup +} e {sup -} flux or the DM annihilates predominantly into leptons with a boost factor of order 100.

79 ASTRONOMY AND ASTROPHYSICS↗

MID-INFRARED SPECTROSCOPY OF TWO LENSED STAR-FORMING GALAXIES

We present low-resolution, rest-frame {approx}5-12 {mu}m Spitzer/IRS spectra of two lensed z {approx} 2 UV-bright star-forming galaxies, SDSS J120602.09+514229.5 and SDSS J090122.37+181432.3. Using the magnification boost from lensing, we are able to study the physical properties of these objects in greater detail than is possible for unlensed systems. In both targets, we detect strong polycyclic aromatic hydrocarbon (PAH) emission at 6.2, 7.7, and 11.3 {mu}m, indicating the presence of vigorous star formation. For J1206, we find a steeply rising continuum and significant [S IV] emission, suggesting that a moderately hard radiation field is powering continuum emission from small dust grains. The strength of the [S IV] emission also implies a sub-solar metallicity of {approx}0.5 Z{sub sun}, confirming published rest-frame optical measurements. In J0901, the PAH lines have large rest-frame equivalent widths (>1 {mu}m) and the continuum rises slowly with wavelength, suggesting that any active galactic nucleus (AGN) contribution to L{sub IR} is insignificant, in contrast to the implications of optical emission-line diagnostics. Using [O III] line flux as a proxy for AGN strength, we estimate that the AGN in J0901 provides only a small fraction of its mid-infrared continuum flux. By combining the detection of [Ar II] with an upper limit on [Ar III] emission, we infer a metallicity of {approx}>1.3 Z{sub sun}. This work highlights the importance of combining rest-frame optical and mid-IR spectroscopy in order to understand the detailed properties of star-forming galaxies at high redshift.

79 ASTRONOMY AND ASTROPHYSICS↗

SEEN AND UNSEEN TIDAL CAUSTICS IN THE ANDROMEDA GALAXY

Indirect detection of high-energy particles from dark matter interactions is a promising avenue for learning more about dark matter, but is hampered by the frequent coincidence of high-energy astrophysical sources of such particles with putative high-density regions of dark matter. We calculate the boost factor and gamma-ray flux from dark matter associated with two shell-like caustics of luminous tidal debris recently discovered around the Andromeda galaxy, under the assumption that dark matter is its own supersymmetric antiparticle. These shell features could be a good candidate for indirect detection of dark matter via gamma rays because they are located far from the primary confusion sources at the galaxy's center, and because the shapes of the shells indicate that most of the mass has piled up near the apocenter. Using a numerical estimator specifically calibrated to estimate densities in N-body representations with sharp features and a previously determined N-body model of the shells, we find that the largest boost factors do occur in the shells but are only a few percent. We also find that the gamma-ray flux is an order of magnitude too low to be detected with Fermi for likely dark matter parameters, and about two orders of magnitude less than the signal that would have come from the dwarf galaxy that produces the shells in the N-body model. We further show that the radial density profiles and relative radial spacing of the shells, in either dark or luminous matter, is relatively insensitive to the details of the potential of the host galaxy but depends in a predictable way on the velocity dispersion of the progenitor galaxy.

79 ASTRONOMY AND ASTROPHYSICS↗

BROAD Ly{alpha} EMISSION FROM THREE NEARBY BL LACERTAE OBJECTS

We present far-UV HST/COS spectra of four nearby BL Lac objects. BL Lac spectra are dominated by a smooth, power-law continuum which arises in a relativistic jet. However, the spectra are not necessarily featureless; weak, broad- and/or narrow-line emission is sometimes seen in high-quality optical spectra. We present detections of Ly{alpha} emission in HST/COS spectra of Mrk 421 (z = 0.030) and PKS 2005-489 (z = 0.071) as well as an archival HST/GHRS observation of Mrk 501 (z = 0.0337). Archival HST/STIS observations of PKS 2155-304 (z = 0.116) show no Ly{alpha} emission to a very low upper limit. Using the assumption that the broad-line region (BLR) clouds are symmetrically placed around the active galactic nucleus (AGN), we use these measured Ly{alpha} emission features to constrain either the relativistic {Gamma} values for the ionizing continuum produced by the jet (in the ionization-bounded case) or the mass of warm gas (in the density-bounded case). While realistic {Gamma} values can be obtained for all four cases, the values for Mrk 421 and PKS 2155-304 are high enough to suggest that covering factors of BLR clouds of {approx}1%-2% might be required to provide consistency with earlier values of Doppler boosting and viewing angles suggested for this class of BL Lacs. This discrepancy also exists in the case of M 87, where the amount of Doppler boosting in our direction is expected to be minimal, again suggestive of a small covering factor of BLR clouds. If, as these small covering factors might suggest, the assumptions of a density-bounded model could be more correct, then the observed Ly{alpha} luminosities require that BL Lac/FR 1 nuclei possess very little warm gas (10{sup -4} to 10{sup -5} M{sub sun}) as suggested by Guilbert et al. If these clouds are in pressure balance with a hotter ({approx}10{sup 6} K) gas, the BLR contains too little mass to power the AGN by accretion alone.

79 ASTRONOMY AND ASTROPHYSICS↗

WEAK-LENSING PEAK FINDING: ESTIMATORS, FILTERS, AND BIASES

Large catalogs of shear-selected peaks have recently become a reality. In order to properly interpret the abundance and properties of these peaks, it is necessary to take into account the effects of the clustering of source galaxies, among themselves and with the lens. In addition, the preferred selection of magnified galaxies in a flux- and size-limited sample leads to fluctuations in the apparent source density that correlate with the lensing field. In this paper, we investigate these issues for two different choices of shear estimators that are commonly in use today: globally normalized and locally normalized estimators. While in principle equivalent, in practice these estimators respond differently to systematic effects such as magnification and cluster member dilution. Furthermore, we find that the answer to the question of which estimator is statistically superior depends on the specific shape of the filter employed for peak finding; suboptimal choices of the estimator+filter combination can result in a suppression of the number of high peaks by orders of magnitude. Magnification and size bias generally act to increase the signal-to-noise {nu} of shear peaks; for high peaks the boost can be as large as {Delta}{nu} {approx} 1-2. Due to the steepness of the peak abundance function, these boosts can result in a significant increase in the observed abundance of shear peaks. A companion paper investigates these same issues within the context of stacked weak-lensing mass estimates.

79 ASTRONOMY AND ASTROPHYSICS↗

KOI 1224: A FOURTH BLOATED HOT WHITE DWARF COMPANION FOUND WITH KEPLER

We present an analysis and interpretation of the Kepler binary system KOI 1224. This is the fourth binary found with Kepler that consists of a thermally bloated, hot white dwarf in a close orbit with a more or less normal star of spectral class A or F. As we show, KOI 1224 contains a white dwarf with T{sub eff} = 14, 700 {+-} 1000 K, mass = 0.22 {+-} 0.02 M{sub Sun }, and radius = 0.103 {+-} 0.002 R{sub Sun }, and an F-star companion of mass 1.59 {+-} 0.06 M{sub Sun} that is somewhat beyond its terminal-age main sequence. The orbital period is quite short at 2.69802 days. The ingredients that are used in the analysis are the Kepler binary light curve, including the detection of the Doppler boosting effect; the NUV and FUV fluxes from the GALEX images of this object; an estimate of the spectral type of the F-star companion; and evolutionary models of the companion designed to match its effective temperature and mean density. The light curve is modeled with a new code named Icarus which we describe in detail. Its features include the full treatment of orbital phase-resolved spectroscopy, Doppler boosting, irradiation effects, and transits/eclipses, which are particularly suited to irradiated eclipsing binaries. We interpret the KOI 1224 system in terms of its likely evolutionary history. We infer that this type of system, containing a bloated hot white dwarf, is the direct descendant of an Algol-type binary. In spite of this basic understanding of the origin of KOI 1224, we discuss a number of problems associated with producing a system with an orbital period this short.

79 ASTRONOMY AND ASTROPHYSICS↗

CHANDRA AND HST IMAGING OF THE QUASARS PKS B0106+013 AND 3C 345: INVERSE COMPTON X-RAYS AND MAGNETIZED JETS

We present results from deep ({approx}70 ks) Chandra/ACIS observations and Hubble Space Telescope (HST) Advanced Camera for Surveys F475W observations of two highly optically polarized quasars belonging to the MOJAVE blazar sample, viz., PKS B0106+013 and 1641+399 (3C 345). These observations reveal X-ray and optical emissions from the jets in both sources. X-ray emission is detected from the entire length of the 0106+013 radio jet, which shows clear bends or wiggles-the X-ray emission is brightest at the first prominent kiloparsec jet bend. A picture of a helical kiloparsec jet with the first kiloparsec-scale bend representing a jet segment moving close(r) to our line of sight, and getting Doppler boosted at both radio and X-ray frequencies, is consistent with these observations. The X-ray emission from the jet end, however, peaks at about 0.''4 ({approx}3.4 kpc) upstream of the radio hot spot. Optical emission is detected both at the X-ray jet termination peak and at the radio hot spot. The X-ray jet termination peak is found upstream of the radio hot spot by around 0.''2 ({approx}1.3 kpc) in the short projected jet of 3C 345. HST optical emission is seen in an arc-like structure coincident with the bright radio hot spot, which we propose is a sharp (apparent) jet bend instead of a terminal point, that crosses our line of sight and consequently has a higher Doppler beaming factor. A weak radio hot spot is indeed observed less than 1'' downstream of the bright radio hot spot, but has no optical or X-ray counterpart. By making use of the parsec-scale radio and the kiloparsec-scale radio/X-ray data, we derive constraints on the jet Lorentz factors ({Gamma}{sub jet}) and inclination angles ({theta}): for a constant jet speed from parsec to kiloparsec scales, we obtain a {Gamma}{sub jet} of {approx}70 for 0106+013 and {approx}40 for 3C 345. On relaxing this assumption, we derive a {Gamma}{sub jet} of {approx}2.5 for both the sources. Upper limits on {theta} of {approx}13 Degree-Sign are obtained for the two quasars. Broadband (radio-optical-X-ray) spectral energy distribution (SED) modeling of individual jet components in both quasars suggests that the optical emission is from the synchrotron mechanism, while the X-rays are produced via the inverse Compton mechanism from relativistically boosted cosmic microwave background seed photons. The locations of the upstream X-ray termination peaks strongly suggest that the sites of bulk jet deceleration lie upstream (by a few kiloparsecs) of the radio hot spots in these quasars. These regions are also the sites of shocks or magnetic field dissipation, which reaccelerate charged particles and produce high-energy optical and X-ray photons. This is consistent with the best-fit SED modeling parameters of magnetic field strength and electron power-law indices being higher in the jet termination regions compared to the cores. The shocked jet regions upstream of the radio hot spots, the kiloparsec-scale jet wiggles and a 'nose cone'-like jet structure in 0106+013, and the V-shaped radio structure in 3C 345, are all broadly consistent with instabilities associated with Poynting-flux-dominated jets. A greater theoretical understanding and more sensitive numerical simulations of jets spanning parsec to kiloparsec scales are needed, however, to make direct quantitative comparisons.

79 ASTRONOMY AND ASTROPHYSICS↗