Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “allocation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Ammonia and methane dairy emissions in the San Joaquin Valley of California from individual feedlot to regional scale

Agricultural ammonia (NH 3 ) emissions are highly uncertain, with high spatiotemporal variability and a lack of widespread in situ measurements. Regional NH 3 emission estimates using mass balance or emission ratio approaches are uncertain due to variable NH 3 sources and sinks as well as unknown plume correlations with other dairy source tracers. We characterize the spatial distributions of NH 3 and methane (CH 4 ) dairy plumes using in situ surface and airborne measurements in the Tulare dairy feedlot region of the San Joaquin Valley, California, during the NASA Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality 2013 field campaign. Surface NH 3 and CH 4 mixing ratios exhibit large variability with maxima localized downwind of individual dairy feedlots. The geometric mean NH 3 :CH 4 enhancement ratio derived from surface measurements is 0.15 ± 0.03 ppmv ppmv –1 . Individual dairy feedlots with spatially distinct NH 3 and CH 4 source pathways led to statistically significant correlations between NH 3 and CH 4 in 68% of the 69 downwind plumes sampled. At longer sampling distances, the NH 3 :CH 4 enhancement ratio decreases 20–30%, suggesting the potential for NH 3 deposition as a loss term for plumes within a few kilometers downwind of feedlots. Aircraft boundary layer transect measurements directly above surface mobile measurements in the dairy region show comparable gradients and geometric mean enhancement ratios within measurement uncertainties, even when including NH 3 partitioning to submicron particles. Individual NH 3 and CH 4 plumes sampled at close proximity where losses are minimal are not necessarily correlated due to lack of mixing and distinct source pathways. As a result, our analyses have important implications for constraining NH 3 sink and plume variability influences on regional NH 3 emission estimates and for improving NH 3 emission inventory spatial allocations.

54 ENVIRONMENTAL SCIENCES↗

Constrained partitioning of autotrophic and heterotrophic respiration reduces model uncertainties of forest ecosystem carbon fluxes but not stocks

Abstract We partitioned the soil carbon dioxide flux ( R s ) into its respective autotrophic and heterotrophic components in a mature temperate‐boreal forest (Howland Forest in Maine, USA). We combined automated chamber measurements of R s with two different partitioning methods: (1) a classic root trenching experiment and (2) a radiocarbon ( 14 C) mass balance approach. With a model‐data fusion approach, we used these data to constrain a parsimonious ecosystem model (FöBAAR), and we investigated differences in modeled C fluxes and pools under both current and future climate scenarios. The trenching experiment indicated that heterotrophic respiration accounted for 53 ± 11% of total R s . In comparison, using the 14 C method, the heterotrophic contribution was 42 ± 9%. For both current and future model runs, incorporating the partitioning data as constraints substantially reduced the uncertainties of autotrophic and heterotrophic respiration fluxes. Moreover, with best fit model parameters, the two partitioning methods yielded fundamentally different estimates of the relative contributions of autotrophic and heterotrophic respiration to total R s , especially at the annual time scale. Surprisingly, however, modeled soil C and biomass C pool size trajectories did not differ significantly between model runs based on the different methods. Instead, model differences in partitioning were compensated for by changes in C allocation, resulting in similar, but still highly uncertain, soil C pool trajectories. Our findings show that incorporating constraints on the partitioning of R s can reduce model uncertainties of fluxes but not pools, and the results are sensitive to the partitioning method used.

Carbone, Mariah S.↗

Significant inconsistency of vegetation carbon density in CMIP5 Earth system models against observational data

Abstract Earth system models (ESMs) have been widely used for projecting global vegetation carbon dynamics, yet how well ESMs performed for simulating vegetation carbon density remains untested. We compiled observational data of vegetation carbon density from literature and existing data sets to evaluate nine ESMs at site, biome, latitude, and global scales. Three variables—root (including fine and coarse roots), total vegetation carbon density, and the root:total vegetation carbon ratios (R/T ratios), were chosen for ESM evaluation. ESM models performed well in simulating the spatial distribution of carbon densities in root ( r = 0.71) and total vegetation ( r = 0.62). However, ESM models had significant biases in simulating absolute carbon densities in root and total vegetation biomass across the majority of land ecosystems, especially in tropical and arctic ecosystems. Particularly, ESMs significantly overestimated carbon density in root (183%) and total vegetation biomass (167%) in climate zones of 10°S–10°N. Substantial discrepancies between modeled and observed R/T ratios were found: the R/T ratios from ESMs were relatively constant, approximately 0.2 across all ecosystems, along latitudinal gradients, and in tropic, temperate, and arctic climatic zones, which was significantly different from the observed large variations in the R/T ratios (0.1–0.8). There were substantial inconsistencies between ESM‐derived carbon density in root and total vegetation biomass and the R/T ratio at multiple scales, indicating urgent needs for model improvements on carbon allocation algorithms and more intensive field campaigns targeting carbon density in all key vegetation components.

54 ENVIRONMENTAL SCIENCES↗

Transient Traceability Analysis of Land Carbon Storage Dynamics: Procedures and Its Application to Two Forest Ecosystems

Abstract Uptake of anthropogenically emitted carbon (C) dioxide by terrestrial ecosystem is critical for determining future climate. However, Earth system models project large uncertainties in future C storage. To help identify sources of uncertainties in model predictions, this study develops a transient traceability framework to trace components of C storage dynamics. Transient C storage ( X ) can be decomposed into two components, C storage capacity ( X c ) and C storage potential ( X p ). X c is the maximum C amount that an ecosystem can potentially store and X p represents the internal capacity of an ecosystem to equilibrate C input and output for a network of pools. X c is codetermined by net primary production (NPP) and residence time (τ N ), with the latter being determined by allocation coefficients, transfer coefficients, environmental scalar, and exit rate. X p is the product of redistribution matrix (τ ch ) and net ecosystem exchange. We applied this framework to two contrasting ecosystems, Duke Forest and Harvard Forest with an ecosystem model. This framework helps identify the mechanisms underlying the responses of carbon cycling in the two forests to climate change. The temporal trajectories of X are similar between the two ecosystems. Using this framework, we found that different mechanisms lead to a similar trajectory between the two ecosystems. This framework has potential to reveal mechanisms behind transient C storage in response to various global change factors. It can also identify sources of uncertainties in predicted transient C storage across models and can therefore be useful for model intercomparison.

58 GEOSCIENCES↗

Nanostructured materials for selective collection of trace-level metals from aqueous systems.

Nanostructured materials for selective collection of trace-level metals from aqueous systems A critical ability for responding to situations involving environmental contaminants is the ability to quickly identify the contaminant(s) involved and the scope of the contamination. Simple field-screening methods are needed to enable on-site, information allocation and decision making. Currently, analytical technology does not exist to allow quick, accurate, and efficient analysis. Existing field-screening methods lack the selectivity and sensitivity needed to provide key information. A large leap in performance is needed and is very unlikely to be achieved with incremental improvements in procedure, instrument design, or improved electronics. A new analytical approach is required. Deficiencies in selectivity and sensitivity can be addressed with high-performance sorbent materials capable of selectively concentrating the target analytes and removing them from the sample matrix. By concentrating and removing the target analyte, these sorbent materials provide a well-defined matrix for analysis. This chapter examines the use of nanostructured materials for the selective collection of trace-level metals from aqueous systems. The focus lies on thiol-functionalized materials. Focusing on thiol surface chemistry allows comparison of mesoporous silica, activated carbon, and superparamagnetic nanoparticles. The chapter also discusses zeolites, imprinted polymer materials, and activated carbon in general. The materials reviewed here are evaluated based on capacity, selectivity, and affinity for target analytes. Research presented here shows that correctly constructed nanostructured materials are superior to conventional sorbents.

nanomaterials, nanostructures, SAMMS, trace level ↗

Optimal economic operation of liquid petroleum products pipeline systems

The majority of overland transport needs for crude petroleum and refined petroleum products are met using pipelines. Numerous studies have developed optimization methods for design of these systems in order to minimize construction costs while meeting capacity requirements. Here, we formulate problems to optimize the operations of existing single liquid commodity pipeline systems subject to physical flow and pump engineering constraints. The objectives are to maximize the economic value created for users of the system and to minimize operating costs. We present a general computational method for this class of continuous, non-convex nonlinear programs, and examine the use of pump operating settings and flow allocations as decision variables. Furthermore, the approach is applied to compute optimal operating regimes and perform engineering economic sensitivity analyses for a case study of a crude oil pipeline developed using publicly available data.

02 PETROLEUM↗

Evaluating the combined effects of light and water availability on the early growth and physiology of Tamarindus indica : Implications for restoration

Abstract Premise The tamarind tree (Tamarindus indica) is a species of significant cultural, economic, and ecological value, with a pantropical distribution. However, the tamarind is experiencing a decline in wild populations in its native range, but the reasons for its decline remain unknown. Methods We examined the critical early life‐history stages for tamarind establishment to understand how varying levels of light and water availability and watering frequency affect its regeneration. Through three greenhouse experiments, we assessed the impact of these resources on the germination, survival, growth, and physiological responses of tamarind seedlings and saplings. Results Water availability was critical for seed germination, but not light levels or pre‐germination treatments. Light was the primary limiting factor for seedling growth. Tamarinds in high light availability grew taller, had more biomass and larger diameter, but the effect of light was modulated by water availability, indicating that there was an interaction between both resources. Water and light affected specific leaf area and leaf dry matter content but not biomass allocation, root‐to‐shoot ratio, or stomatal conductance. Water availability influenced sapling growth, but watering frequency did not, indicating a resilience of tamarind saplings to changes in rainfall periodicity but a sensitivity to total rainfall amounts. Conclusions Our study underscores the importance of considering both light and water availability in tamarind restoration efforts and contribute to understanding plant responses and trade‐offs under different levels of critical resources. Our findings will inform conservation strategies to support the regeneration and long‐term survival ofTamarindus indicain its native habitats.

Plant Sciences↗

Palladium/Ferrierite versus Palladium/SSZ‐13 Passive NOx Adsorbers: Adsorbate‐Controlled Location of Atomically Dispersed Palladium(II) in Ferrierite Determines High Activity and Stability**

Abstract Pd‐loaded FER and SSZ‐13 zeolites as low‐temperature passive NOx adsorbers (PNA) are compared under practical conditions. Vehicle cold start exposes the material to CO under a range of concentrations, necessitating a systematic exploration of the effect of CO on the performance of isolated Pd ions in PNA. The NO release temperature of both adsorbers decreases gradually with an increase in CO concentration from a few hundred to a few thousand ppm. This beneficial effect results from local nano‐“hot spot” formation during CO oxidation. Dissimilar to Pd/SSZ‐13, increasing the CO concentration above ≈1000 ppm improves the NOx storage significantly for Pd/FER, which was attributed to the presence of Pd ions in FER sites that are shielded from NOx. CO mobilizes this Pd atom to the NOx accessible position where it becomes active for PNA. This behavior explains the very high resistance of Pd/FER to hydrothermal aging: Pd/FER materials survive hydrothermal aging at 800 °C in 10 % H 2 O vapor for 16 hours with no deterioration in NOx uptake/release behavior. Thus, by allocating Pd ions to the specific microporous pockets in FER, we have produced (hydro)thermally stable and active PNA materials.

Khivantsev, Konstantin↗

Palladium/Ferrierite versus Palladium/SSZ-13 Passive NOx Adsorbers: Adsorbate-Controlled Location of Atomically Dispersed Palladium(II) in Ferrierite Determines High Activity and Stability**

Pd-loaded FER and SSZ-13 zeolites as low-temperature passive NOx adsorbers (PNA) are compared under practical conditions. Vehicle cold start exposes the material to CO under a range of concentrations, necessitating a systematic exploration of the effect of CO on the performance of isolated Pd ions in PNA. The NO release temperature of both adsorbers decreases gradually with an increase in CO concentration from a few hundred to a few thousand ppm. This beneficial effect results from local nano-“hot spot” formation during CO oxidation. Dissimilar to Pd/SSZ-13, increasing the CO concentration above ˜1000 ppm improves the NOx storage significantly for Pd/FER, which was attributed to the presence of Pd ions in FER sites that are shielded from NOx. CO mobilizes this Pd atom to the NOx accessible position where it becomes active for PNA. This behavior explains the very high resistance of Pd/FER to hydrothermal aging: Pd/FER materials survive hydrothermal aging at 800°C in 10% H 2 O vapor for 16 hours with no deterioration in NOx uptake/release behavior. Therefore, by allocating Pd ions to the specific microporous pockets in FER, we have produced (hydro)thermally stable and active PNA materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bayesian Design of Experiments for Logistic Regression to Evaluate Multiple Forensic Algorithms

When evaluating the performance of several forensic classification algorithms, it is desirable to construct a design that considers a variety of performance levels for each of the algorithms. We describe a strategy to use Bayesian design of experiments with multiple prior estimates to capture anticipated performance. Our goal is to characterize results from the different classification algorithms as a function of multiple explanatory variables and use this to choose a design about which units to test. Bayesian design of experiments has been successful for generalized linear models, including logistic regression models. Here, we develop methodology for the case where there are several potentially nonoverlapping priors for anticipated performance under consideration. The weighted priors method performs well for a broad range of true underlying model parameter choices and is more robust when compared to other candidate design choices. Additionally, we show how this can be applied in the multivariate input case and provide some useful summary measures. The shared information plot is used to evaluate design point allocation, and the D-value difference plot allows for the comparison of design performance across multiple potential parameter values in higher dimensions. Here, we illustrate the methods with several examples.

97 MATHEMATICS AND COMPUTING↗

Assessment of the feedstock supply for siting single- and multiple-feedstock biorefineries in the USA and identification of prevalent feedstocks

An integrated multi-feedstock bioenergy (i.e., biofuel, biopower, or bioproduct) supply system has potential to reduce biomass supply system uncertainties and costs. This study identifies optimal configurations of multi-feedstock biomass-to-biorefinery supply chains and pertinent feedstock combinations based on spatial distribution of feedstock and lowest delivered cost to the biorefinery. We used the Supply Characterization Model (SCM) to allocate feedstock supplies to candidate biorefinery facilities. Model runs were performed for herbaceous energy crops, agriculture residue, and woody biomass available in 2017, 2022, 2025, and 2030 as estimated by the Policy Analysis System (POLYSYS) and Forest Sustainable and Economic Analysis Model (ForSEAM) models. Three feedstock supply scenarios were compared: (a) an herbaceous scenario: switchgrass, miscanthus, biosorghum, and corn stover; (b) a woody scenario: coppice wood, noncoppice wood, whole trees, and forestry residues, and (c) a mixed scenario: a combination of all feedstocks in herbaceous and woody scenarios. By 2030 the analyses predicted that 323, 168, and 473 biorefineries were sited in the herbaceous, woody, and mixed scenario, respectively, in the conterminous USA. Feedstock mixes supplied to the biorefineries were mostly dominated by a single feedstock. The most prominent feedstock mixes identified were: (1) switchgrass and miscanthus; (2) coppice and noncoppice wood; and (3) coppice wood, noncoppice wood, switchgrass and miscanthus. Biorefineries using multi-feedstock would be beneficial for growth of bioeconomy, however flexible and cost-effective conversion platforms should be developed to efficiently utilize multiple feedstocks. This analysis identifies biorefinery locations and feedstock supply mixes while minimizing delivered feedstock costs based on spatial and temporal feedstock availability.

09 BIOMASS FUELS↗

Mobilizing mine lands for biobased decarbonization strategies

Over 163 000 ha of mine lands in Pennsylvania (PA) have the potential to produce willow as a feedstock for renewable energy generation. Each year these lands could produce between 454 000 and 907 000 dry Mg of willow, which can be a feedstock for bioenergy (i.e., biopower) with carbon capture and sequestration (BECCS) or sustainable aviation fuel (SAF) production. We used a spatially explicit model to explore cost-minimized allocation of willow biomass from abandoned mine lands (AML) to be used for BECCS or SAF production and to abate carbon dioxide. The results suggest that between 454 000 and 907 000 dry Mg of biomass can be produced on AML in PA at costs from $94 to $250 per dry Mg. This AML willow biomass could be combined with other available biomass and aggregated to ten facilities to produce 17.9 TWh of power; alternatively, it could produce 958 million liters of jet fuel, 638 million liters of renewable diesel, and 1.289 billion liters of naphtha, along with 0.735 TWh of electricity. From this analysis, in PA, under the BECCS pathway, up to 36 million Mg per year of CO2 could be abated at costs of up to $134 per Mg; under the SAF pathway, up to 17.5 million Mg per year of CO2 could be abated at costs up to $150 per Mg of CO2. The use of mine land willow as a supplemental feedstock for SAF and BECCS would need strong incentive programs if costs of production are to be comparable with production on agricultural land.

Wahlstrom, Mallory [Pennsylvania State University]↗

Simulating competition in the US bioeconomy to produce hard‐to‐electrify transportation fuels using limited biomass resources

This study presents a novel bioeconomy optimization framework, BiOpt, designed to address critical questions regarding the strategic use of limited US biomass resources for biofuel production. By integrating detailed techno-economic analyses, life cycle assessments, and resource assessment data, BiOpt optimizes resource distributions across competing technologies to maximize economic performance and/or minimize greenhouse gas emissions. Using feedstock scenarios from the 2023 Billion Ton Study, the analysis explores optimal biomass allocations across sustainable aviation fuel, diesel, and marine biofuel conversion pathways given varying production targets and policy incentives. Results demonstrate distinct feedstock preferences and pathway utilizations when prioritizing economic returns vs. emissions reductions. For instance, fats, oils, and greases were highly favored in cost-optimized scenarios, while low-carbon feedstocks such as wet waste dominated greenhouse gas-minimized strategies. The findings underscore the pivotal role of policy incentives and technological advances in shaping biofuel supply chains and provide actionable insights for scaling sustainable biofuel production to decarbonize hard-to-electrify sectors. This framework offers a robust tool for policymakers and stakeholders to evaluate biofuel strategies that balance energy output, economic viability, and environmental impact.

09 BIOMASS FUELS↗

Single‐Site, Single‐Metal‐Atom, Heterogeneous Electrocatalyst: Metal–Organic‐Framework Supported Molybdenum Sulfide for Redox Mediator‐Assisted Hydrogen Evolution Reaction

Abstract Synthesis of single‐site catalysts, whereby the local structure and surrounding chemical environments are identical, has been challenging, particularly in heterogeneous catalysis, as the support often presents spectrum of chemically distinct binding sites. Yet, the above criteria are crucial in attributing the apparent catalytic performance to the structural motif. The presented work augments on our previous work using monometallic molybdenum sulfide tethered within a zirconium‐based metal‐organic framework (MOF), NU‐1000; the monometallic nature enables all presented sites to be catalytically addressable. As the molybdenum sulfide species resided within two distinct pores (micro‐ and mesopores) of the MOF support, we have imparted uniformity in the local chemical environment by reducing the pore heterogeneity down to a single mesopore. Single‐site and single‐atom nature of the candidate catalyst was established via X‐ray diffraction measurements. Redox mediators were implemented, which, under reductive potentials, provide reduced species; they can effectively deliver the necessary reducing equivalences to the catalytic units that can otherwise not be addressed electrochemically due to the low electron mobility within the framework. Our results indicate the micropore‐allocated molybdenum sulfide is approximately four times more active as that in mesopores, whereas its catalytic mechanism is identical, underscoring the importance of controlling chemical environment beyond the active site.

Noh, Hyunho↗

Genetic algorithm based task reordering to improve the performance of batch scheduled massively parallel scientific applications

The growth in size of networked high performance computers along with novel accelerator-based node architectures has further emphasized the importance of communication efficiency in high performance computing. The world's largest high performance computers are usually operated as shared user facilities due to the costs of acquisition and operation. Applications are scheduled for execution in a shared environment and are placed on nodes that are not necessarily contiguous on the interconnect. Furthermore, the placement of tasks on the nodes allocated by the scheduler is sub-optimal, leading to performance loss and variability. Here, we investigate the impact of task placement on the performance of two massively parallel application codes on the Titan supercomputer, a turbulent combustion flow solver (S3D) and a molecular dynamics code (LAMMPS). Benchmark studies show a significant deviation from ideal weak scaling and variability in performance. The inter-task communication distance was determined to be one of the significant contributors to the performance degradation and variability. A genetic algorithm-based parallel optimization technique was used to optimize the task ordering. This technique provides an improved placement of the tasks on the nodes, taking into account the application's communication topology and the system interconnect topology. As a result, application benchmarks after task reordering through genetic algorithm show a significant improvement in performance and reduction in variability, therefore enabling the applications to achieve better time to solution and scalability on Titan during production.

97 MATHEMATICS AND COMPUTING↗

Evaluating the networking characteristics of the Cray XC-40 Intel Knights Landing-based Cori supercomputer at NERSC

There are many potential issues associated with deploying the Intel Xeon Phi™ (code named Knights Landing [KNL]) manycore processor in a large-scale supercomputer. One in particular is the ability to fully utilize the high-speed communications network, given that the serial performance of a Xeon Phi TM core is a fraction of a Xeon®core. In this paper, we take a look at the trade-offs associated with allocating enough cores to fully utilize the Aries high-speed network versus cores dedicated to computation, e.g., the trade-off between MPI and OpenMP. In addition, we evaluate new features of Cray MPI in support of KNL, such as internode optimizations. We also evaluate one-sided programming models such as Unified Parallel C. We quantify the impact of the above trade-offs and features using a suite of National Energy Research Scientific Computing Center applications.

97 MATHEMATICS AND COMPUTING↗

Performance assessment of ensembles of in situ workflows under resource constraints

Summary Scientific breakthroughs in biomolecular methods and improvements in hardware technology have shifted from a long‐running simulation to a large set of shorter simulations running simultaneously, called an ensemble. In an ensemble, simulations are usually coupled with analyses of data produced by the simulations. In situ methods can be used to analyze large volumes of data generated by scientific simulations at runtime (i.e., simulations and analyses are performed concurrently). In this work, we study the execution of ensemble‐based simulations paired with in situ analyses using in‐memory staging methods. Using an ensemble of molecular dynamics in situ workflows with multiple simulations and analyses, we first show that collecting traditional metrics such as makespan, instructions per cycle, memory usage, or cache miss ratio is not sufficient to characterize complex behaviors of ensembles. We propose a method to evaluate the performance of ensembles of workflows that captures multiple resource usage aspects: resource efficiency, resource allocation, and resource provisioning. Experimental results demonstrate that the proposed method can effectively distinguish the performance of different component placements in an ensemble with up to 32 ensemble members. By evaluating different co‐location scenarios, our proposed performance indicators demonstrate benefits of co‐locating simulation and coupled analyses within a compute node.

Do, Tu Mai Anh↗