Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ZIRCONIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Improved Thermal Stability of a Copper-containing Ceria-based Catalyst for Low Temperature CO Oxidation under Simulated Diesel Exhaust Conditions

Cerium-zirconium mixed oxides (CZ) containing Cu (CZCu) have very high CO oxidation performance at low temperatures under simulated diesel exhaust conditions; however, CZCu is prone to significant deactivation upon hydrothermal aging. In this work, we discovered that Cu supported on a commercial CZ (GMR6) is thermally stable, and after aging Cu/GMR6 shows comparable activity for CO oxidation to the fresh CZCu. GMR6 is more thermally stable than homemade CZ, and Cu/GMR6 shows a smaller decrease of BET surface area than Cu/CZ upon hydrothermal aging. The decrease of the BET surface area of the catalyst is accelerated by the presence of Cu. The presence of La and Pr in the GMR6 support provides high structural stability and enhanced oxygen mobility. The formation of both surface and bulk carbonates during CO oxidation results in activity decrease of Cu/GMR6. Thermal decomposition of these carbonates fully regenerates Cu/GMR6. The presence of low level of SO2 in the feed gas mixture poisons the CO oxidation activity of Cu/GMR6 forming highly stable sulfates on the CZ support.

CO oxidation, cerium zirconium copper oxide, therm↗

Computational screening, synthesis and testing of metal–organic frameworks with a bithiazole linker for carbon dioxide capture and its green conversion into cyclic carbonates

Computational crystal construction algorithms were used to create twelve metal–organic frameworks containing a newly synthesized [2,2'-bithiazole]-5,5'-dicarboxylic acid (H 2 TzTz) spacer and assorted transition metal nodes. Among the twelve structures, the zirconium-based MOF of general formula [Zr 6 O 4 (OH) 4 (TzTz) 6 ] (1) was found to be the best candidate for carbon dioxide uptake, as judged from the results of the grand canonical Monte Carlo (GCMC) simulations of CO 2 adsorption isotherms. Guided by the simulation results, 1 was synthesized in the laboratory and thoroughly characterized. 1 is isoreticular to its bithiophene and bis(benzene) (UiO-67) analogues; it crystallizes in the cubic Pn$\bar{3}$ with combining macron] space group with fcu topology, and it features octahedral [Zr 6 ] nodes connected by twelve carboxylate groups from six bridging TzTz 2- spacers. It is a predominantly microporous material (micropore volume = 84% of the total pore volume), with a BET area of 840 m 2 g -1 and a maximum CO 2 uptake at ambient pressure of 2.3 mmol g -1 (10.0 wt%) or 1.7 mmol g -1 (7.5 wt%) at 273 or 298 K, respectively. The CO 2 affinity (isosteric heat of adsorption Qst = 18.7 kJ mol -1 ; CO 2 /N 2 Henry selectivity = 10; CO 2 /N 2 IAST selectivity = 8.4) is similar to that of its bithiophene analogue. After partial removal of solvent (activation), 1 was tested as a heterogeneous catalyst in the reaction of CO 2 with epoxides bearing a –CH 2 X pendant arm (X = Cl: epichlorohydrin; X = Br: epibromohydrin) to give the corresponding cyclic carbonates at T = 393 K and p CO 2 = 1 bar under green (solvent- and co-catalyst-free) conditions. A good conversion of 74% and a turnover frequency of 12.3 mmol (cyclic carbonate) per mmol Zr per h have been recorded with epibromohydrin as a substrate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation of Silicon Nitride Multilayer Ceramic Radome Material and Optimal Design of the Wall Structure

A study of silicon nitride ceramic radomes, which includes preparation of the material and optimal design of the radome wall structure, is presented in this paper. Multilayer radome wall structure with high dielectric constant skins and a low dielectric constant core layer is used for broadband application. As a candidate material for both the skins and core layer, silicon nitride ceramics of controlled dielectric constant in the range 3.0{approx}7.5 were prepared by adding different content of sintering aids such as magnesia, alumina, silica and zirconium phosphate binder and choosing suitable sintering methods. A computer aided design (CAD) for the wall structure of silicon nitride multilayer ceramic radome based on microwave equivalent network method is carried out according to design requirements. By optimizing the thickness of skins and core layer, the power transmission efficiency of such a multilayer Si{sub 3}N{sub 4} ceramic radome is calculated. The calculated results suggest that when the dielectric constant of skins lies in the range 6{approx}7.5 and core layer in the range 3.5{approx}4, the power transmission efficiency is above 85% with frequency of 2{approx}18 GHz while the thickness of skins is less than 0.03{lambda} and the thickness ratio of skins to core layer is less than 1:15.

36 MATERIALS SCIENCE↗

Description of Exotic Nuclei with the Interacting Boson Model

Even--even nuclei in the A{approx}100 mass region are investigated within the framework of the interacting boson model-1 (IBM-1). The study includes energy spectra and electric quadrupole transition properties of zirconium, molybdenum, ruthenium and palladium isotopes with neutron number N{>=}54. A global parametrization of the IBM-1 hamiltonian is found leading to a description of 301 collective levels in 30 nuclei with a root-mean-square deviation from the observed level energies of 119 keV. The geometric character of the nuclei can be visualized by plotting the potential energy surface V({beta},{gamma}) obtained from the IBM-1 hamiltonian in the classical limit. The parametrization established on the basis of known elements is then used to predict properties of the unknown, neutron-rich isotopes {sup 106}Zr, {sup 112}Mo, {sup 116}Ru and {sup 120}Pd.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Radiation Effects in Binary and Multicomponent Solids

The report deals with damage kinetics, defect evolution and radiation response of binary and multicomponent solids irradiated with MeV electrons. Studies were made into such systems as metallic alloys, semiconductors, high-T{sub c} superconductors and bulk metallic glasses. The common features of the studies involve the efficient use of MeV dc electron beams as generators of point-like defects in solids, precise low-temperature (5-80 K) irradiation conditions, and, as a rule, in situ measurements of irradiated material parameters. To exemplify, successful investigations on the following topics are reported here: (1) Annealing of radiation defects in binary zirconium-base alloys. (2) Impact of defect density on electronic properties of nanocrystalline hydrogenated silicon. (3) Pinning process in high-T{sub c} YBa{sub 2}Cu{sub 3}O{sub 7-x} single crystals irradiated with MeV electrons. (4) Accumulation and recovery kinetics of radiation defects in bulk metallic glasses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Convection in molten pool created by a concentrated energy flux on a solid metal target

During surface evaporation of metals by use of a concentrated energy flux such as electron beam or lasers, a liquid metal pool having a very high temperature gradient is formed around the hot zone created by the beam. Due to temperature dependence of surface tension, density, and depression of the evaporating surface caused by back pressure of the emitted vapor in this molten pool, a strong convective current sets in the molten pool. A proposition is made that this convection may pass through three different stages during increase in the electron beam power depending upon dominance of the various driving forces. To confirm this, convective heat transfer is quantified in terms of dimensionless Nusselt number and its evolution with power is studied in an experiment using aluminum, copper, and zirconium as targets. These experimentally determined values are also compared to the theoretical values predicted by earlier researchers to test the validity of their assumptions and to know about the type of flow in the melt pool. Thus, conclusion about the physical characteristics of flow in the molten pool of metals could be drawn by considering the roles of surface tension and curvature of the evaporating surface on the evolution of convective heat transfer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Development of bubble microstructure in ErT2 films during aging

Helium bubbles form in metal tritide films as tritium decays into 3He, influencing mechanical properties and long-term film stability. The bubble nucleation and growth mechanisms comprise an active research area, but there has been only one previous systematic experimental study of helium bubble growth in metal tritides, on zirconium tritides. There have been no such studies on tritides such as ErT2 that form plate-like bubbles and lack a secondary bubble population on a network of line dislocations, and yet such a study is needed to inform the modeling of helium-bubble microstructure development in a broader range of metal tritides. Transmission electron microscopy (TEM) has been used to study the growth and evolution of helium bubbles in ErT2 films over a four-year period. The results have been used to test the present models of helium bubble nucleation and growth in metal tritides, particularly those forming plate-like bubbles. The results support the models of Trinkaus and Cowgill. The observations of non-uniform bubble thicknesses and the pattern of grain-boundary bubble formation, however, indicate that these models could be strengthened by closer attention to details of interfacial energy. It is strongly recommended that efforts be made (either experimentally or by calculation) to determine anisotropy of tritide/helium interfacial energy, both for clean, stoichiometric interfaces, and also allowing for such factors as non-stoichiometry and segregation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermodynamic Behaviour of Bulk Metallic Glasses

The thermodynamics and kinetics of glass forming melts are essential parameters for understanding the glass forming ability of materials. The Gibbs free energy difference ({Delta}G) between undercooled liquid and corresponding equilibrium solid plays an important role in nucleation and growth processes. Due to high thermal stability of undercooled melts of BMG glass formers the experimental data of thermodynamical parameters of bulk metallic melts are available over a wide range of undercooling and it is very interesting to study the thermodynamics of undercooled melts of BMGs. The aim of present work is to study {Delta}G of zirconium based BMG using an expression based on Taylor's series expansion. The enthalpy difference ({Delta}H) and entropy difference ({Delta}S) between the undercooled liquid and corresponding equilibrium solid phases is also studied. The importance of the Kauzmann temperature has also been discussed. The study is made for Zr{sub 58.5}{sup -} Cu{sub 15.6}Ni{sub 12.8}Al{sub 10.3}Nb{sub 2.8} in the temperature range T{sub m} to T{sub g}, where T{sub m} and T{sub g} are the melting and glass transition temperatures respectively. An attempt is also made to study the glass forming ability of BMGs.

36 MATERIALS SCIENCE↗

Absolute calibration method for laser megajoule neutron yield measurement by activation diagnostics

The laser megajoule (LMJ) and the National Ignition Facility (NIF) plan to demonstrate thermonuclear ignition using inertial confinement fusion (ICF). The neutron yield is one of the most important parameters to characterize ICF experiment performance. For decades, the activation diagnostic was chosen as a reference at ICF facilities and is now planned to be the first nuclear diagnostic on LMJ, measuring both 2.45 MeV and 14.1 MeV neutron yields. Challenges for the activation diagnostic development are absolute calibration, accuracy, range requirement, and harsh environment. At this time, copper and zirconium material are identified for 14.1 MeV neutron yield measurement and indium material for 2.45 MeV neutrons. A series of calibrations were performed at Commissariat a l'Energie Atomique (CEA) on a Van de Graff facility to determine activation diagnostics efficiencies and to compare them with results from calculations. The CEA copper activation diagnostic was tested on the OMEGA facility during DT implosion. Experiments showed that CEA and Laboratory for Laser Energetics (LLE) diagnostics agree to better than 1% on the neutron yield measurement, with an independent calibration for each system. Also, experimental sensitivities are in good agreement with simulations and allow us to scale activation diagnostics for the LMJ measurement range.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Point defect engineering strategies to suppress A-center formation in silicon

We investigate the impact of tin doping on the formation of vacancy-oxygen pairs (VO or A-centers) and their conversion to VO{sub 2} clusters in electron-irradiated silicon. The experimental results are consistent with previous reports that Sn doping suppresses the formation of the A-center. We introduce a model to account for the observed differences under both Sn-poor and Sn-rich doping conditions. Using density functional theory calculations, we propose point defect engineering strategies to reduce the concentration of the deleterious A-centers in silicon. We predict that doping with lead, zirconium, or hafnium will lead to the suppression of the A-centers.

36 MATERIALS SCIENCE↗

Energy levels of odd-even nuclei using broken pair model

A method to calculate energy levels and wave functions of odd-even nuclei, in the frame work of the broken pair model have been developed. The accuracy of the model has been tested by comparing the shell model results of limiting cases in which the broken pair model exactly coincides with the shell model, where there are two-proton/neutron + one-neutron/proton in the valence levels. The model is then applied to calculate the energy levels of some nuclei in the Zirconium region. The model results compare reasonably well with the shell model as well as with the experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Non-destructive evaluation of degradation in EB-PVD thermal barrier coatings by infrared reflectance spectroscopy

At room temperature and atmospheric conditions infrared reflectance spectroscopy and X-ray diffraction were employed for the detection of the phase transformation and residual stress within thermal barrier coatings (TBC). The TBC's samples initially consisted of the porous ceramic topcoat deposited by electron beam plasma vapor deposition, a bond coat and a superalloy substrate. Reflectance spectroscopy scans were performed from 7497 cm{sup -1} to 68 cm{sup -1} to analysis the fingerprint region as well as the chemical bonding region. These regions should indicate if a detectable change within the TBC response is a result of thermal degradation of the microstructure and the changes in yttrium dispersion throughout the yttrium stabilized zirconium. The thermal degradation was induced by thermal cycling the samples to 1100 Degree-Sign C and then cooling them in an atmospheric environment. X-ray diffraction was also used to detect the phase composition within the TBC samples and see if either would clearly identify failure prior to actual spallation. The eventual measurability and quantify-ability of the phase changes within the TBC's may be used as an effective non-destructive evaluation (NDE) technique that would allow personnel in the field to know when servicing of the turbine blade was necessary.

36 MATERIALS SCIENCE↗

'Water window' sources: Selection based on the interplay of spectral properties and multilayer reflection bandwidth

Development of laser-produced plasma 'water window' sources poses a major challenge in x-ray research and most effort has focused on line sources for use with zone plate optics. Here, a comparison of carbon and nitrogen line emission with that from both 3d - 4f and 4d - 4f unresolved transition arrays shows that, at power densities available from 'table-top' solid-state lasers, 3d - 4f emission from zirconium plasmas is most intense, and calculations show that in an imaging system based on multilayer mirrors, for reflectance bandwidths >1% has superior performance than either line or broader-band sources. For bandwidths <1%, line sources are preferable.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermal conductivity profile determination in proton-irradiated ZrC by spatial and frequency scanning thermal wave methods

Using complementary thermal wave methods, the irradiation damaged region of zirconium carbide (ZrC) is characterized by quantifiably profiling the thermophysical property degradation. The ZrC sample was irradiated by a 2.6 MeV proton beam at 600 °C to a dose of 1.75 displacements per atom. Spatial scanning techniques including scanning thermal microscopy (SThM), lock-in infrared thermography (lock-in IRT), and photothermal radiometry (PTR) were used to directly map the in-depth profile of thermal conductivity on a cross section of the ZrC sample. The advantages and limitations of each system are discussed and compared, finding consistent results from all techniques. SThM provides the best resolution finding a very uniform thermal conductivity envelope in the damaged region measuring ∼52 ± 2 μm deep. Frequency-based scanning PTR provides quantification of the thermal parameters of the sample using the SThM measured profile to provide validation of a heating model. Measured irradiated and virgin thermal conductivities are found to be 11.9 ± 0.5 W m{sup −1} K{sup −1} and 26.7 ±1 W m{sup −1} K{sup −1}, respectively. A thermal resistance evidenced in the frequency spectra of the PTR results was calculated to be (1.58 ± 0.1) × 10{sup −6} m{sup 2} K W{sup −1}. The measured thermal conductivity values compare well with the thermal conductivity extracted from the SThM calibrated signal and the spatially scanned PTR. Combined spatial and frequency scanning techniques are shown to provide a valuable, complementary combination for thermal property characterization of proton-irradiated ZrC. Such methodology could be useful for other studies of ion-irradiated materials.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Order parameter and scaling behavior in BaZr{sub x}Ti{sub 1−x}O{sub 3} (0.3 < x < 0.6) relaxor ferroelectrics

We report the relaxor behavior of the zirconium doped barium titanate BaZr{sub x}Ti{sub 1−x}O{sub 3} solid solutions and discuss the temperature, frequency, and concentration dependence in terms of correlations among the polar nanoregions. The relaxor behavior is analyzed within the mean field theory by estimating the Edward-Anderson order parameter q{sub EA}. Additionally, we find that q{sub EA} calculated for the different concentrations obeys a scaling behavior q{sub EA}=1−(T/T{sub m}){sup n}, where T{sub m} are the respective dielectric maxima temperatures and n = 2.0 ± 0.1. The frequency dependence of the q{sub EA} also shows results consistent with the above mentioned picture.

36 MATERIALS SCIENCE↗

Zr/oxidized diamond interface for high power Schottky diodes

High forward current density of 10{sup 3} A/cm{sup 2} (at 6 V) and a breakdown field larger than 7.7 MV/cm for diamond diodes with a pseudo-vertical architecture, are demonstrated. The power figure of merit is above 244 MW/cm{sup 2} and the relative standard deviation of the reverse current density over 83 diodes is 10% with a mean value of 10{sup −9} A/cm{sup 2}. These results are obtained with zirconium as Schottky contacts on the oxygenated (100) oriented surface of a stack comprising an optimized lightly boron doped diamond layer on a heavily boron doped one, epitaxially grown on a Ib substrate. The origin of such performances are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design of voice coil motor dynamic focusing unit for a laser scanner

Laser scanning systems have been used for material processing tasks such as welding, cutting, marking, and drilling. However, applications have been limited by the small range of motion and slow speed of the focusing unit, which carries the focusing optics. To overcome these limitations, a dynamic focusing system with a long travel range and high speed is needed. In this study, a dynamic focusing unit for a laser scanning system with a voice coil motor (VCM) mechanism is proposed to enable fast speed and a wide focusing range. The VCM has finer precision and higher speed than conventional step motors and a longer travel range than earlier lead zirconium titanate actuators. The system has a hollow configuration to provide a laser beam path. This also makes it compact and transmission-free and gives it low inertia. The VCM's magnetics are modeled using a permeance model. Its design parameters are determined by optimization using the Broyden–Fletcher–Goldfarb–Shanno method and a sequential quadratic programming algorithm. After the VCM is designed, the dynamic focusing unit is fabricated and assembled. The permeance model is verified by a magnetic finite element method simulation tool, Maxwell 2D and 3D, and by measurement data from a gauss meter. The performance is verified experimentally. The results show a resolution of 0.2 μm and travel range of 16 mm. These are better than those of conventional focusing systems; therefore, this focusing unit can be applied to laser scanning systems for good machining capability.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Continuous cross-over from ferroelectric to relaxor state and piezoelectric properties of BaTiO{sub 3}-BaZrO{sub 3}-CaTiO{sub 3} single crystals

Optimal properties like piezoelectricity can be found in polarizable materials for which the structure changes sharply under small composition variations in the vicinity of their morphotropic phase boundary or the triple point in their isobaric temperature-composition phase diagram. In the latter, lead-free (Ba{sub 0.850}Ca{sub 0.150})(Ti{sub 0.900}Zr{sub 0.100})O{sub 3} ceramics exhibit outstanding piezoelectric coefficients. For the first time, we report the growth of piezoelectric lead-free single crystals in the BaTiO{sub 3}-BaZrO{sub 3}-CaTiO{sub 3} pseudo-ternary system. The stoichiometry control in the CaO-BaO-TiO{sub 2}-ZrO{sub 2} solid solution led to single crystals with various compositions ranging from (Ba{sub 0.857}Ca{sub 0.143})(Ti{sub 0.928}Zr{sub 0.072})O{sub 3} to (Ba{sub 0.953}Ca{sub 0.047})(Ti{sub 0.427}Zr{sub 0.573})O{sub 3}. We evidenced a continuous cross-over from a ferroelectric state at high titanium content to a relaxor one on increasing the zirconium content. Such a property tuning is rather seldom observed in lead-free ferroelectrics and confirms what was already reported for ceramics. Single crystal with (Ba{sub 0.838}Ca{sub 0.162})(Ti{sub 0.854}Zr{sub 0.146})O{sub 3} composition, which has been grown and oriented along [001] crystallographic direction, displayed electromechanical coefficients d{sub 31} and k{sub 31} of 93 pC.N{sup −1} and 0.18, respectively, near the room temperature (T = 305 K)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗