Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Variational approach”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

How old are lunar lobate scarps? 1. Seismic resetting of crater size-frequency distributions

Previous studies have estimated the ages of lunar lobate scarps, some of the youngest tectonic landforms on the Moon, based on the estimated life-times of their fresh morphologies and associated small graben, using crater degradation ages, or via buffered and traditional crater size-frequency distribution (CSFD) measurements. Here, we reexamine five scarps previously dated by Binder and Gunga (1985) with crater degradation ages to benchmark the evaluation of both the buffered and traditional CSFD approaches for determination of absolute model ages (AMAs) at scarps. Both CSFD methods yield similar ages for each individual scarp, indicating that fault activity not only can be measured on the scarp itself, but also in the surrounding terrain –an indication that tectonic activity causes surface renewal both adjacent to and even kilometers distant from scarps. Size-frequency variations in the regions surrounding the scarps are thus useful for studying the extent and severity of the ground motion caused by coseismic slip events during scarp formation. All age determination approaches continue to indicate that lunar lobate scarps were active in the late Copernican, with some scarps possibly experiencing activity within the last 100 Ma.

Carolyn H. van der Bogert↗
DOE OSTI2024

ABC -Auxetics: An Implicit Design Approach for Negative Poisson's Ratio Materials

A novel methodology is introduced for designing auxetic (negative Poisson's ratio) structures based on topological principles and is demonstrated by investigating a new class of auxetics based on two-dimensional (2D) textile weave patterns. Conventional methodology for designing auxetic materials typically involves determining a single deformable block (a unit cell) of material whose shape results in auxetic behavior. Consequently, patterning such a unit cell in a 2D (or 3D) domain results in a larger structure that exhibits overall auxetic behavior. Such an approach naturally relies on some prior intuition and experience regarding which unit cells may be auxetic. Second, tuning the properties of the resulting structures is typically limited to parametric variations of the geometry of a specific type of unit cell. Thus, most of the currently known auxetic structures belong to a selected few classes of unit cell geometries that are explicitly defined in accordance with a specified topological (i.e., grid structure). Herein, a new class of auxetic structures is demonstrated that, while periodic, can be generated implicitly, i.e., without reference to a specific unit cell design. The approach leverages weave-based parameters (A–B–C), resulting in a rich design space for auxetics that is previously unexplored.

36 MATERIALS SCIENCE↗
NASA NTRS1994

Coupling between middle atmosphere trend estimates and solar effects in ozone vertical structure

Studies are performed on both the Stratospheric Aerosol and Gas Experiment (SAGE) II (1985-1989) and Solar Backscatter Ultraviolet Spectrometer (SBUV)-Version 6 (1979-1986) global ozone vertical structure satellite data sets to determine the long-term trends in ozone as a function of altitude (pressure) and latitude. SAGE II data are only available during the period of increasing solar activity and show increases in ozone with time in the upper stratosphere which are attributed largely to rising solar activity. Looking at this data set independently, the solar effects and trends are highly coupled and cannot be clearly separated. However, a study of combined SBUV and SAGE II data over the 11-year solar cycle shows a clear response of ozone to 11-year solar variations and allows a decoupling of solar effects, quasibiennial oscillations (QBO), and trends. The detailed pattern of long-term ozone trends become clear using this approach. In the upper stratosphere, ozone depletion increases sharply with latitude. Global trends are fairly symmetric about the equator but are somewhat stronger in the Southern Hemisphere. Near the equator, some layers of ozone are decreasing with time while others appear to be increasing. Near 30 mb, there is evidence of intrusion to mid latitudes of high latitude negative trends. Near 15 mb, trends appear to be very weak. Near the tropopause there appears to be strong ozone depletion on a global scale. Two regions of unexpectedly strong ozone response to 11-year solar variations were detected: the first near 2 mb and the second near 30 mb at low latitudes and near 15 mb at mid latitudes.

Keating, G. M.↗
NASA NTRS1993

Microwave emission from a sunspot. II - The center-to-limb variation

The center-to-limb variation of both the spectral and spatial brightness distributions is investigated using a series of microwave observations of a sunspot in the active region NOAA 4741. Depending on the heliocentric position of the sunspot, the microwave emission appears in two typical profiles: either a ring structure near the center of the disk or a single-peak structure near the limb. Due to the increase of the gyroresonance opacity of the field lines near the spot center as the viewing angle increases, the brightness temperature at high, optically thin frequencies increases slightly as the spot approaches the limb. In addition, a change of effective harmonic, which accompanies a discontinuous change in the degree of polarization, characterizes the center-to-limb variation of the gyroresonance spectrum. Finally, the height of the gyroresonance layer, low in the corona of the active region, is determined from a change of spectrum from gyroresonance to free-free emission as the spot passes over the solar limb.

Lee, Jeongwoo W.↗
NASA NTRS1992

Identification of time-varying structural dynamic systems - An artificial intelligence approach

An application of the artificial intelligence-derived methodologies of heuristic search and object-oriented programming to the problem of identifying the form of the model and the associated parameters of a time-varying structural dynamic system is presented in this paper. Possible model variations due to changes in boundary conditions or configurations of a structure are organized into a taxonomy of models, and a variant of best-first search is used to identify the model whose simulated response best matches that of the current physical structure. Simulated model responses are verified experimentally. An output-error approach is used in a discontinuous model space, and an equation-error approach is used in the parameter space. The advantages of the AI methods used, compared with conventional programming techniques for implementing knowledge structuring and inheritance, are discussed. Convergence conditions and example problems have been discussed. In the example problem, both the time-varying model and its new parameters have been identified when changes occur.

Glass, B. J.↗
NASA NTRS2006

Porous Media Approach for Modeling Closed Cell Foam

In order to minimize boil off of the liquid oxygen and liquid hydrogen and to prevent the formation of ice on its exterior surface, the Space Shuttle External Tank (ET) is insulated using various low-density, closed-cell polymeric foams. Improved analysis methods for these foam materials are needed to predict the foam structural response and to help identify the foam fracture behavior in order to help minimize foam shedding occurrences. This presentation describes a continuum based approach to modeling the foam thermo-mechanical behavior that accounts for the cellular nature of the material and explicitly addresses the effect of the internal cell gas pressure. A porous media approach is implemented in a finite element frame work to model the mechanical behavior of the closed cell foam. The ABAQUS general purpose finite element program is used to simulate the continuum behavior of the foam. The soil mechanics element is implemented to account for the cell internal pressure and its effect on the stress and strain fields. The pressure variation inside the closed cells is calculated using the ideal gas laws. The soil mechanics element is compatible with an orthotropic materials model to capture the different behavior between the rise and in-plane directions of the foam. The porous media approach is applied to model the foam thermal strain and calculate the foam effective coefficient of thermal expansion. The calculated foam coefficients of thermal expansion were able to simulate the measured thermal strain during heat up from cryogenic temperature to room temperature in vacuum. The porous media approach was applied to an insulated substrate with one inch foam and compared to a simple elastic solution without pore pressure. The porous media approach is also applied to model the foam mechanical behavior during subscale laboratory experiments. In this test, a foam layer sprayed on a metal substrate is subjected to a temperature variation while the metal substrate is stretched to simulate the structural response of the tank during operation. The thermal expansion mismatch between the foam and the metal substrate and the thermal gradient in the foam layer causes high tensile stresses near the metal/foam interface that can lead to delamination.

Ghosn, Louis J.↗
NASA NTRS2014

On Parametric Sensitivity of Reynolds-Averaged Navier-Stokes SST Turbulence Model: 2D Hypersonic Shock-Wave Boundary Layer Interactions

Examined is sensitivity of separation extent, wall pressure and heating to variation of primary input flow parameters, such as Mach and Reynolds numbers and shock strength, for 2D and Axisymmetric Hypersonic Shock Wave Turbulent Boundary Layer interactions obtained by Navier-Stokes methods using the SST turbulence model. Baseline parametric sensitivity response is provided in part by comparison with vetted experiments, and in part through updated correlations based on free interaction theory concepts. A recent database compilation of hypersonic 2D shock-wave/turbulent boundary layer experiments extensively used in a prior related uncertainty analysis provides the foundation for this updated correlation approach, as well as for more conventional validation. The primary CFD method for this work is DPLR, one of NASA's real-gas aerothermodynamic production RANS codes. Comparisons are also made with CFL3D, one of NASA's mature perfect-gas RANS codes. Deficiencies in predicted separation response of RANS/SST solutions to parametric variations of test conditions are summarized, along with recommendations as to future turbulence approach.

Hypersonic↗
DOE OSTI2024

The multifaceted role of c-di-AMP signaling in the regulation of Porphyromonas gingivalis lipopolysaccharide structure and function

This study unveils the intricate functional association between cyclic di-3’,5’-adenylic acid (c-di-AMP) signaling, cellular bioenergetics, and the regulation of lipopolysaccharide (LPS) profile in Porphyromonas gingivalis, a Gram-negative obligate anaerobe considered as a keystone pathogen involved in the pathogenesis of chronic periodontitis. Previous research has identified variations in P. gingivalis LPS profile as a major virulence factor, yet the underlying mechanism of its modulation has remained elusive. We employed a comprehensive methodological approach, combining two mutants exhibiting varying levels of c-di-AMP compared to the wild type, alongside an optimized analytical methodology that combines conventional mass spectrometry techniques with a novel approach known as FLAT n . We demonstrate that c-di-AMP acts as a metabolic nexus, connecting bioenergetic status to nuanced shifts in fatty acid and glycosyl profiles within P. gingivalis LPS. Notably, the predicted regulator gene cdaR, serving as a potent regulator of c-di-AMP synthesis, was found essential for producing N-acetylgalactosamine and an unidentified glycolipid class associated with the LPS profile. The multifaceted roles of c-di-AMP in bacterial physiology are underscored, emphasizing its significance in orchestrating adaptive responses to stimuli. Furthermore, our findings illuminate the significance of LPS variations and c-di-AMP signaling in determining the biological activities and immunostimulatory potential of P. gingivalis LPS, promoting a pathoadaptive strategy. The study expands the understanding of c-di-AMP pathways in Gram-negative species, laying a foundation for future investigations into the mechanisms governing variations in LPS structure at the molecular level and their implications for host-pathogen interactions.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1979

Minimizing pattern effects in semiconductor lasers at high rate pulse modulation

This paper deals with analytical and experimental work related to modulation of a semiconductor laser used in high bit rate communication. The approach is based upon minimizing the charge storage effect by a proper choice of the area of the modulating pulses and the bias current. The concept of using additional current pulses to probe for variations in electron density between pulses is investigated. The primary limitation on bit rate is found to be the ability to generate laser drive pulses free of ringing or similar transients. This and the 300 ps pulsewidth, an experimental constraint, limit the bit rate to about 1 Gbit/s. However, by using this approach it appears that bit rates considerably higher than 2 Gbits/s could be reached with sufficiently accurate control of drive pulse shape. It is found that the laser bias and the current pulse area had to be controlled within 1 percent and 10 percent, respectively.

Torphammar, P.↗
DOE OSTI2024

High‐throughput combinatorial approach expedites the synthesis of a lead‐free relaxor ferroelectric system

Abstract Developing novel lead‐free ferroelectric materials is crucial for next‐generation microelectronic technologies that are energy efficient and environment friendly. However, materials discovery and property optimization are typically time‐consuming due to the limited throughput of traditional synthesis methods. In this work, we use a high‐throughput combinatorial synthesis approach to fabricate lead‐free ferroelectric superlattices and solid solutions of (Ba 0.7 Ca 0.3 )TiO 3 (BCT) and Ba(Zr 0.2 Ti 0.8 )O 3 (BZT) phases with continuous variation of composition and layer thickness. High‐resolution x‐ray diffraction (XRD) and analytical scanning transmission electron microscopy (STEM) demonstrate high film quality and well‐controlled compositional gradients. Ferroelectric and dielectric property measurements identify the “optimal property point” achieved at the composition of 48BZT–52BCT. Displacement vector maps reveal that ferroelectric domain sizes are tunable by varying {BCT–BZT} N superlattice geometry. This high‐throughput synthesis approach can be applied to many other material systems to expedite new materials discovery and properties optimization, allowing for the exploration of a large area of phase space within a single growth. image

36 MATERIALS SCIENCE↗
NASA NTRS2020

A Machine Learning Examination of Hydroxyl Radical Differences Among Model Simulations for CCMI-1

Hydroxyl radical (OH) plays critical roles within the troposphere, such as determining the lifetime of methane (CH4), yet is challenging to model due to its fast cycling and dependence on a multitude of sources and sinks. As a result, the reasons for variations in OH and the resulting CH4 lifetime (TCH4), both between models and in time, are difficult to diagnose. We apply a neural network (NN) approach to address this issue within a group of models that participated in the Chemistry-Climate Model Initiative (CCMI). Analysis of the historical specified dynamics simulations performed for CCMI indicates that the primary drivers of TCH4 differences among ten models are the flux of UV light to the troposphere (indicated by the photolysis frequency JO1D) due mostly to clouds, mixing ratio of tropospheric ozone (O3), the abundance of nitrogen oxides (NOx≡NO+NO2), and details of the various chemical mechanisms that drive OH. Water vapor, carbon monoxide (CO), the ratio of NO:NOx, and formaldehyde (HCHO) explain moderate differences in TCH4, while isoprene, CH4, the photolysis frequency of NO2 by visible light (JNO2), overhead O3 column, and temperature account for little-to-no model variation in CH4. We also apply the NNs to analysis of temporal trends in OH from 1980 to 2015. All models that participated in the specified dynamics historical simulation for CCMI demonstrate a decline in CH4 during the analysed timeframe. The significant contributors to this trend, in order of importance, are tropospheric O3, JO1D, NOx, and H2O, with CO also causing substantial interannual variability in OH burden. Finally, the identified trends in TCH4 are compared to calculated trends in the tropospheric mean OH concentration from previous work, based on analysis of observations. The comparison reveals a robust result for the effect of rising water vapor on OH and CH4, imparting an increasing and decreasing trend of about 0.5% decade(exp -1), respectively. The responses due to NOx, O3 column, and temperature are also in reasonably good agreement between the two studies, though a discrepancy in the CH4 response highlights a need for further examination of the CH4 feedback on the abundance of OH.

Julie M Nicely↗
DOE OSTI2023

Quantifying Site Effects and Their Influence on Earthquake Source Parameter Estimations Using a Dense Array in Oklahoma

We investigate the effects of site response on source parameter estimates using earthquakes recorded by the LArge-n Seismic Survey in Oklahoma (LASSO). While it is well known that near-surface unconsolidated sediments can cause an apparent breakdown of earthquake self-similarity, the influence of laterally varying site conditions remains unclear. We analyze site conditions across the 1825-station array on a river plain within an area of 40 km by 23 km using vertical ground motions from 14 regional earthquakes. While the source radiation pattern controls P-wave ground motions below 8 Hz, the surface geology correlates with P-wave ground motions above 8 Hz and S-wave ground motions at 2–21 Hz. Stations installed in alluvial sediments have vertical ground motions that can exceed three times the array median. We use the variation of ground motion of regional earthquakes across the array as a proxy for site effects. The corner frequencies and stress drops of local earthquakes ( M L = 0.01–3) estimated using a standard single-spectra approach show negative correlations with the site-effect proxy, while the seismic moments show positive correlations. In contrast, the spectral-ratio approach effectively shows no correlation. The overall bias is small as expected for this relatively homogeneous structure; accurate estimation of site-related biases requires at least 30 stations. Correcting for site-related biases reduces the standard deviations of the source parameters by less than 13% of the total variations. Remaining variations are partially associated with source directivity and model misfits— as small earthquakes can have complex ruptures.

58 GEOSCIENCES↗
NASA NTRS2016

A Neural Network Approach for Identifying Particle Pitch Angle Distributions in Van Allen Probes Data

Analysis of particle pitch angle distributions (PADs) has been used as a means to comprehend a multitude of different physical mechanisms that lead to flux variations in the Van Allen belts and also to particle precipitation into the upper atmosphere. In this work we developed a neural network-based data clustering methodology that automatically identifies distinct PAD types in an unsupervised way using particle flux data. One can promptly identify and locate three well-known PAD types in both time and radial distance, namely, 90deg peaked, butterfly, and flattop distributions. In order to illustrate the applicability of our methodology, we used relativistic electron flux data from the whole month of November 2014, acquired from the Relativistic Electron-Proton Telescope instrument on board the Van Allen Probes, but it is emphasized that our approach can also be used with multiplatform spacecraft data. Our PAD classification results are in reasonably good agreement with those obtained by standard statistical fitting algorithms. The proposed methodology has a potential use for Van Allen belt's monitoring.

Souza, V. M.↗
DOE OSTI2025

Robust Spectral Anomaly Detection in EELS Spectral Images via 3D Convolutional Variational Autoencoders

Abstract A 3D Convolutional Variational Autoencoder (3D‐CVAE) is introduced for automated anomaly detection in electron energy‐loss spectroscopy spectrum imaging (EELS‐SI) data. This approach leverages the full 3D structure of EELS‐SI data to detect subtle spectral anomalies while preserving both spatial and spectral correlations across the datacube. By employing cross‐entropy loss and training on bulk spectra, the model learns to reconstruct bulk features characteristic of the defect‐free material. In exploring methods for anomaly detection, both the 3D‐CVAE approach and principal component analysis (PCA) are evaluated, testing their performance using FeL‐edge ΔEpeak shifts designed to simulate material defects. These results show that 3D‐CVAE achieves superior anomaly detection and maintains consistent performance across various shift magnitudes. The method demonstrates clear bimodal separation between bulk and anomalous spectra, enabling reliable classification. Further analysis verifies that lower‐dimensional representations are robust to anomalies in the data. While performance advantages over PCA diminish with decreasing anomaly concentration, our method maintains high reconstruction quality even in challenging, noise‐dominated spectral regions. This approach provides a robust framework for unsupervised automated detection of spectral anomalies in EELS‐SI data, particularly valuable for analyzing complex material systems.

Chemistry↗
DOE OSTI2021

An extended polynomial chaos expansion for PDF characterization and variation with aleatory and epistemic uncertainties

This paper presents an extended polynomial chaos formalism for epistemic uncertainties and a new framework for evaluating sensitivities and variations of output probability density functions (PDF) to uncertainty in probabilistic models of input variables. An ”extended” polynomial chaos expansion (PCE) approach is developed that accounts for both aleatory and epistemic uncertainties, modeled as random variables, thus allowing a unified treatment of both types of uncertainty. We explore in particular epistemic uncertainty associated with the choice of prior probabilistic models for input parameters. A PCE-based Kernel Density (KDE) construction provides a composite map from the PCE coefficients and germ to the PDF of quantities of interest (QoI). Here, the sensitivities of these PDF with respect to the input parameters are then evaluated. Input parameters of the probabilistic models are considered. By sampling over the epistemic random variable, a family of PDFs is generated and the failure probability is itself estimated as a random variable with its own PCE. Integrating epistemic uncertainties within the PCE framework results in a computationally efficient paradigm for propagation and sensitivity evaluation. Two typical illustrative examples are used to demonstrate the proposed approach.

Aleatory uncertainty↗
DOE OSTI2023

Collisionless relativistic magnetic reconnection driven by electron vortices in laser-plasma interaction

Magnetic reconnection (MR) is a fundamental process in space and laboratory plasmas. The appearance of high power lasers opens a new way to investigate MR under the relativistic condition. In this paper, relativistic collisionless MR driven by two ultra-intense lasers and a pair of asymmetric targets is studied numerically via the kinetic simulations. The static magnetic fields produced by the electron vortex structures with opposite magnetic polarities approach each other driven by the magnetic pressure and the density gradient. The antiparallel magnetic fields annihilate accompanied with the topological variation and the corresponding magnetic field energy is being dissipated to the kinetic energy of the nonthermal charged particles. Besides the outflows along the current sheet, a fast particle bunch is accelerated perpendicularly contributed by the displacement current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Parallel quantum computing simulations via quantum accelerator platform virtualization

Quantum circuit execution is a central task in quantum computation. Due to inherent quantum-mechanical constraints, quantum computing workflows often involve a considerable number of independent measurements over a large set of slightly different quantum circuits. Here we discuss a simple model for parallelizing such quantum circuit executions that is based on introducing a large array of virtual quantum processing units (mapped to HPC nodes in our case) as a parallel quantum computing platform. Implemented within the XACC framework, the model can readily take advantage of its backend-agnostic features, enabling parallel quantum computing/simulation over any target backend supported by XACC. We illustrate the performance of this approach by demonstrating strong scaling in two pertinent domain science problems, namely in computing the gradients for the multi-contracted variational quantum eigensolver and in data-driven quantum circuit learning, where we vary the number of qubits and the number of circuit layers. Here, the latter simulation leverages the cuQuantum library to run efficiently on GPU-accelerated HPC platforms.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Nuclear explosion monitoring network design considerations

Design of an efficient monitoring network requires information on the type and size of releases to be detected, the accuracy and reliability of the measuring equipment, and the desired network performance. This work provides a scientific basis for optimizing or minimizing networks of 133 Xe samplers to achieve a desired performance level for different levels of release. The approach of this work varies the density of sampling locations to find optimal location subsets, and to explore the properties of variations of those subsets – how crucial is a specific subset; are substitutions problematic? The choice of possible station locations is arbitrary but constrained to some extent by the location of islands, land masses, difficult topography (mountains, etc.) and the places where infrastructure exists to run and support a sampler. Performance is evaluated using hypothetical releases and atmospheric transport models that cover an entire year.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗