Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VIBRATION EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Particle kinetic simulation of high altitude hypervelocity flight

Rarefied flows about hypersonic vehicles entering the upper atmosphere or through nozzles expanding into a near vacuum may only be simulated accurately with a direct simulation Monte Carlo (DSMC) method. Under this grant, researchers enhanced the models employed in the DSMC method and performed simulations in support of existing NASA projects or missions. DSMC models were developed and validated for simulating rotational, vibrational, and chemical relaxation in high-temperature flows, including effects of quantized anharmonic oscillators and temperature-dependent relaxation rates. State-of-the-art advancements were made in simulating coupled vibration - dissociation - recombination for post-shock flows. Models were also developed to compute vehicle surface temperatures directly in the code rather than requiring isothermal estimates. These codes were instrumental in simulating aerobraking of NASA's Magellan spacecraft during orbital maneuvers to assess heat transfer and aerodynamic properties of the delicate satellite. NASA also depended upon simulations of entry of the Galileo probe into the atmosphere of Jupiter to provide drag and flow field information essential for accurate interpretation of an onboard experiment. Finally, the codes have been used extensively to simulate expanding nozzle flows in low-power thrusters in support of propulsion activities at NASA-Lewis. Detailed comparisons between continuum calculations and DSMC results helped to quantify the limitations of continuum CFD codes in rarefied applications.

Boyd, Iain↗

Vibration reduction in helicopter rotors using an active control surface located on the blade

A feasibility study of vibration reduction in a four-bladed helicopter rotor using individual blade control (IBC), which is implemented by an individually controlled aerodynamic surface located on each blade, is presented. For this exploratory study, a simple offset-hinged spring restrained model of the blade is used with fully coupled flap-lag-torsional dynamics for each blade. Deterministic controllers based on local and global system models are implemented to reduce 4/rev hub loads using both an actively controlled aerodynamic surface on each blade as well as conventional IBC, where the complete blade undergoes cyclic pitch change. The effectiveness of the two approaches for simultaneous reduction of the 4/rev hub shears and hub moments is compared. Conventional IBC requires considerably more power to achieve approximately the same level of vibration reduction as that obtained by implementing IBC using an active control surface located on the outboard segment of the blade. The effect of blade torsional flexibility on the vibration reduction effectiveness of the actively controlled surface was also considered and it was found that this parameter has a very substantial influence.

Millott, T. A.↗

Simulations of the infrared, Raman, and 2D-IR photon echo spectra of water in nanoscale silica pores

Vibrational spectroscopy is frequently used to characterize nanoconfined liquids and probe the effect of the confining framework on the liquid structure and dynamics relative to the corresponding bulk fluid. However, it is still unclear what molecular-level information can be obtained from such measurements. In this paper, we address this question by using molecular dynamics (MD) simulations to reproduce the linear infrared (IR), Raman, and two-dimensional IR (2D-IR) photon echo spectra for water confined within hydrophilic (hydroxyl-terminated) silica mesopores. To simplify the spectra the OH stretching region of isotopically dilute HOD in D{sub 2}O is considered. An empirical mapping approach is used to obtain the OH vibrational frequencies, transition dipoles, and transition polarizabilities from the MD simulations. The simulated linear IR and Raman spectra are in good general agreement with measured spectra of water in mesoporous silica reported in the literature. The key effect of confinement on the water spectrum is a vibrational blueshift for OH groups that are closest to the pore interface. The blueshift can be attributed to the weaker hydrogen bonds (H-bonds) formed between the OH groups and silica oxygen acceptors. Non-Condon effects greatly diminish the contribution of these OH moieties to the linear IR spectrum, but these weaker H-bonds are readily apparent in the Raman spectrum. The 2D-IR spectra have not yet been measured and thus the present results represent a prediction. The simulated spectra indicates that it should be possible to probe the slower spectral diffusion of confined water compared to the bulk liquid by analysis of the 2D-IR spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vibronic coupling in asymmetric bichromophores: Theory and application to diphenylmethane-d{sub 5}

A theoretical model based on Fulton and Gouterman dimer Hamiltonian [J. Chem. Phys. 35, 1059 (1961)] is used to understand the jet cooled spectra of partly deuterated diphenylmethane (DPM-d{sub 5}), reported in adjoining paper by Zwier and co-workers [“Vibronic coupling in asymmetric bichromophores: Experimental investigation of diphenylmethane-d5,” J. Chem. Phys. 141, 064316 (2014)]. The model is extended to include multiple vibrational modes, vibrational asymmetries between the monomers, and inter-monomer modes. Time dependent density functional theory and equation of motion coupled cluster electronic structure calculations are used to obtain parameters for the model Hamiltonian. The monomer units for DPM-d{sub 5} are toluene and partially deuterated toluene-d{sub 5}. The comparisons of modeled and experimental spectra show that the model captures the vibronic effects on a multitude of observables, including anomalously intense vibrational states, transition dipole moment directions, and localization/delocalization phenomena of both the vibronic and electronic wavefunctions. Following the success of the model, a qualitative picture of vibronic coupling in DPM-d{sub 5} is built using only three active vibrations. This illustrates the ability of the model to not just qualitatively predict but also phenomenologically explain the vibronic effects observed in spectra of complex bichromophores.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phonon thermal transport outside of local equilibrium in nanowires via molecular dynamics

We study thermal transport through Pt nanowires that bridge planar contacts as a function of wire length and vibrational frequency of the contacts. When phonons in the contacts have lower average frequencies than those in the wires thermal transport occurs under conditions away from local equilibrium with low-frequency phonons experiencing a higher thermal gradient than high-frequency ones. This results in a size-dependent increase in the effective thermal conductivity of the wire with decreasing vibrational frequencies of the contacts. The interfacial resistivity when heat flows from the wire to the contact is also size-dependent and has the same physical origin in the lack of full equilibration in short nanowires. We develop a model based on a 1D atomic chain that captures the salient physics of the MD results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magneto-elastic coupling in bulk and nanoscale MnO

Phonons are exquisitely sensitive to finite length scale effects because they are intimately connected to charge, structure, and magnetism, and a quantitative analysis of their behavior can reveal microscopic aspects of spin-lattice interaction. To investigate these effects in a model correlated oxide, we measured the infrared vibrational properties of nanoscale MnO and compared the results to those of a single crystal. A charge and bonding analysis reveals that Born effective charge, local effective charge, total polarizability, and the force constant are overall lower in the nanoparticles compared to the bulk. Several of these quantities split through the Neel transition due to magnetoelastic interactions. We find that the spin-lattice coupling drops from {approx}7 cm{sup -1} in the single crystal to <1 cm{sup -1} in the nanoparticles. These results are important for understanding finite length scale effects in simple binary oxides and the more complicated functional oxides that emanate from this parent compound.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Particle kinetic simulation of high altitude hypervelocity flight

Rarefied flows about hypersonic vehicles entering the upper atmosphere or through nozzles expanding into a near vacuum may only be simulated accurately with a direct simulation Monte Carlo (DSMC) method. Under this grant, researchers enhanced the models employed in the DSMC method and performed simulations in support of existing NASA projects or missions. DSMC models were developed and validated for simulating rotational, vibrational, and chemical relaxation in high-temperature flows, including effects of quantized anharmonic oscillators and temperature-dependent relaxation rates. State-of-the-art advancements were made in simulating coupled vibration-dissociation recombination for post-shock flows. Models were also developed to compute vehicle surface temperatures directly in the code rather than requiring isothermal estimates. These codes were instrumental in simulating aerobraking of NASA's Magellan spacecraft during orbital maneuvers to assess heat transfer and aerodynamic properties of the delicate satellite. NASA also depended upon simulations of entry of the Galileo probe into the atmosphere of Jupiter to provide drag and flow field information essential for accurate interpretation of an onboard experiment. Finally, the codes have been used extensively to simulate expanding nozzle flows in low-power thrusters in support of propulsion activities at NASA-Lewis. Detailed comparisons between continuum calculations and DSMC results helped to quantify the limitations of continuum CFD codes in rarefied applications.

Boyd, Iain↗

Fault detection of helicopter gearboxes using the multi-valued influence matrix method

In this paper we investigate the effectiveness of a pattern classifying fault detection system that is designed to cope with the variability of fault signatures inherent in helicopter gearboxes. For detection, the measurements are monitored on-line and flagged upon the detection of abnormalities, so that they can be attributed to a faulty or normal case. As such, the detection system is composed of two components, a quantization matrix to flag the measurements, and a multi-valued influence matrix (MVIM) that represents the behavior of measurements during normal operation and at fault instances. Both the quantization matrix and influence matrix are tuned during a training session so as to minimize the error in detection. To demonstrate the effectiveness of this detection system, it was applied to vibration measurements collected from a helicopter gearbox during normal operation and at various fault instances. The results indicate that the MVIM method provides excellent results when the full range of faults effects on the measurements are included in the training set.

Chin, Hsinyung↗

Vibration and buckling analysis of composite plates and shells.

The magnitude of the previously observed effect associated with laminated composites - i.e., that a coupling exists between extension and bending if the plies are not balanced in number and fiber orientation - is investigated for buckling and vibration of doubly curved monocoque plates and shells of positive and negative Gaussian curvature. In addition, the effect of stacking sequence is examined. Solutions are presented which provide a means of simply and economically assessing the magnitude of the coupling and stacking effects for various composite materials and geometric configurations.

Mcelman, J. A.↗

Machine Learning for Optical Scanning Probe Nanoscopy

Abstract The ability to perform nanometer‐scale optical imaging and spectroscopy is key to deciphering the low‐energy effects in quantum materials, as well as vibrational fingerprints in planetary and extraterrestrial particles, catalytic substances, and aqueous biological samples. These tasks can be accomplished by the scattering‐type scanning near‐field optical microscopy (s‐SNOM) technique that has recently spread to many research fields and enabled notable discoveries. Herein, it is shown that the s‐SNOM, together with scanning probe research in general, can benefit in many ways from artificial‐intelligence (AI) and machine‐learning (ML) algorithms. Augmented with AI‐ and ML‐enhanced data acquisition and analysis, scanning probe optical nanoscopy is poised to become more efficient, accurate, and intelligent.

Chen, Xinzhong↗

Electromagnetic and Rotational Characteristics of a Superconducting Flywheel Energy Storage System Utilizing a Radial-Type High-Temperature Superconducting Bearing

A 2 kW/28.5 kJ superconducting flywheel energy storage system (SFESS) with a radial-type high-temperature superconducting (HTS) bearing was set up to study the electromagnetic and rotational characteristics. The structure of the SFESS as well as the design of its main parts was reported. A mathematical model based on the finite element method (FEM) was established to research the electromagnetic characteristics of the HTS bearing during the levitation process, which show that a part of the magnetic flux penetrates into the edge of the HTS bulks and then goes back to the opposite pole of the permanent magnet rotor (PMR). The induced current mainly distributes in the edge of the HTS bulks, indicating that larger force acts on the edge part of the HTS bulks and probably causes them to crack. The free rotations of the rotor at different steady-state speeds of 2500–5000 rpm and its radial vibration were displayed. The induced voltage of the stator winding of the motor in this process was analyzed. The rotational characteristics are related to the vibration of the rotor. Below the resonant frequency, the vibration increases significantly with the speed. Enhancing the radial stiffness to limit the vibration amplitude of the rotor is an effective approach to improve the speed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reagent-Triggered Isomerization of Fluxional Cluster Catalyst via Dynamic Coupling

Metallic cluster catalysts have many thermodynamically accessible isomers with diverse active sites and low reaction barriers, and lately a strong hypothesis emerged that the many catalyst states collectively drive the catalysis. Furthermore, it remained a hypothesis that catalyst isomerization is actually kinetically feasible under the current reaction conditions. Using high-temperature dynamics simulations and sampling, a range of orientations, and vibrational energy distributions, we probe how thermal effects and molecular events affect cluster catalyst dynamics. We show that even such a delicate affair as the dissociation or scattering of a methane molecule on the heavy and thus slow Pt 13 cluster triggers substantial isomerization of the catalyst, far beyond thermal at 700 K. A kinetic coupling between the methane activity and cluster catalyst dynamics is observed. In return, the thermal dynamics of the cluster affects the methane reaction and scattering probabilities. Hence, molecular events at the surfaces of fluxional cluster catalysts should facilitate the population of an ensemble of catalyst states under the current reaction conditions, with implications for available active sites, reaction mechanisms, and apparent rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Artificial Neural Networks as Mappings between Proton Potentials, Wave Functions, Densities, and Energy Levels

We report artificial neural networks (ANNs) have become important in quantum chemistry. Herein, applications to nuclear quantum effects, such as zero-point energy, vibrationally excited states, and hydrogen tunneling, are explored. ANNs are used to solve the time-independent Schrödinger equation for single- and double-well potentials representing hydrogen-bonded molecular systems capable of proton transfer. ANN mappings are trained to predict the lowest five proton vibrational energies, wave functions, and densities from the proton potentials and to predict the excited state proton vibrational energies and densities from the proton ground state density. For the inverse problem, ANN mappings are trained to predict the proton potential from the proton vibrational energy levels or the proton ground state density. This latter mapping is theoretically justified by the first Hohenberg-Kohn theorem establishing a one-to-one correspondence between the external potential and the ground state density. ANNs for two- and three-dimensional systems are also presented to illustrate the straightforward extension to higher dimensions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assessing the effect of regularization on the molecular properties predicted by SCAN and self-interaction corrected SCAN meta-GGA

Recent regularization of the SCAN meta-GGA functional (rSCAN) has simplified the numerical complexities of the SCAN functional, alleviating SCAN's stringent demand on the numerical integration grids to some extent. The regularization of rSCAN, however, results in the breaking of some constraints such as the uniform electron gas limit, the slowly varying density limit, and coordinate scaling of the iso-orbital indicator. Here, we assess the effects of regularization on the electronic, structural, vibrational, and magnetic properties of molecules by comparing the SCAN and rSCAN predictions. The properties studied include atomic energies, atomization energies, ionization potentials, electron affinities, barrier heights, infrared intensities, dissociation and reaction energies, spin moments of molecular magnets, and isomer ordering of water clusters. Our results show that rSCAN requires less dense numerical grids and gives very similar results to those of SCAN for all properties examined with the exception of atomization energies, which are worsened in rSCAN. We also examine the performance of self-interaction-corrected (SIC) rSCAN with respect to SIC-SCAN using the Perdew–Zunger (PZ) SIC method. The PZSIC method uses orbital densities to compute one-electron self-interaction errors and places an even more stringent demand on numerical grids. Our results show that SIC-rSCAN gives marginally better performance than SIC-SCAN for almost all properties studied in this work with numerical grids that are on average half or less as dense as that needed for SIC-SCAN.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Annealing effects on the optical properties of semiconducting boron carbide

Infrared vibrations of as-deposited and annealed semiconducting boron carbide thin films were investigated by midinfrared spectroscopic ellipsometry. The strong boron-hydrogen resonance at approx2560 cm{sup -1} in as-deposited films reveals considerable hydrogen incorporation during plasma-enhanced chemical vapor deposition. Extended annealing at 600 deg. C caused significant reduction in film thickness, substantial reduction of boron-hydrogen bond resonance absorption, and development of distinct blue-shifted boron-carbon and icosahedral vibration mode resonances. Our findings suggest that annealing results in substantial loss of hydrogen and in development of icosahedral structure, accompanied by strain relaxation and densification.

36 MATERIALS SCIENCE↗

Bandgaps and directional properties of two-dimensional square beam-like zigzag lattices

In this paper we propose four kinds of two-dimensional square beam-like zigzag lattice structures and study their bandgaps and directional propagation of elastic waves. The band structures are calculated by using the finite element method. Both the in-plane and out-of-plane waves are investigated simultaneously via the three-dimensional Euler beam elements. The mechanism of the bandgap generation is analyzed by studying the vibration modes at the bandgap edges. The effects of the geometry parameters of the xy- and z-zigzag lattices on the bandgaps are investigated and discussed. Multiple complete bandgaps are found owing to the separation of the degeneracy by introducing bending arms. The bandgaps are sensitive to the geometry parameters of the periodic systems. The deformed displacement fields of the harmonic responses of a finite lattice structure subjected to harmonic loads at different positions are illustrated to show the directional wave propagation. An extension of the proposed concept to the hexagonal lattices is also presented. The research work in this paper is relevant to the practical design of cellular structures with enhanced vibro-acoustics performance.

36 MATERIALS SCIENCE↗

On the study of threshold intensity dependence on the gain and loss processes in laser induced spark ignition of molecular hydrogen

In the present work, a numerical analysis is performed to investigate the comparative contribution of the mechanisms responsible for electron gain and losses in laser spark ignition and plasma formation of H{sub 2}. The analysis considered H{sub 2} over pressure range 150 -3000 torr irradiated by a Nd:YAG laser radiation at wavelengths 1064 and 532 nm with pulse length 5.5 ns. The study based on a modified electron cascade model by one of the authors which solves numerically the time dependent Boltzmann equation as well as a set of rate equations that describe the rate of change of the excited states population. The model includes most of the physical processes that might take place during the interaction. Computations of The threshold intensity are performed for the combined and separate contribution of each of the gain and loss processes. Reasonable agreement with the measured values over the tested pressure range is obtained only for the case of the combined contribution. Basing on the calculation of the electron energy distribution function, the determined relations of the time evolution of the electrons density for selected values of the tested gas pressure region revealed that photo-ionization of the excited states could determine the time of electron generation and hence spark ignition. Collisional ionization contributes to this phenomenon only at the high pressure regime. Loss processes due to electron diffusion, vibrational excitation are found to have significant effect over examined pressure values for the two applied laser wavelengths.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗