Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VECTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Design development of the Apollo command and service module thrust vector attitude control systems

Development of the Apollo thrust vector control digital autopilot (TVC DAP) was summarized. This is the control system that provided pitch and yaw attitude control during velocity change maneuvers using the main rocket engine on the Apollo service module. A list of ten primary functional requirements for this control system are presented, each being subordinate to a more general requirement appearing earlier on the list. Development process functions were then identified and the essential information flow paths were explored. This provided some visibility into the particular NASA/contractor interface, as well as relationships between the many individual activities.

William H. Peters↗
NASA NTRS1978

Effects of spanwise nozzle geometry and location on the longitudinal aerodynamic characteristics of a vectored-engine-over-wing configuration at subsonic speeds

A V/STOL tunnel study was performed to determine the effects of spanwise blowing on longitudinal aerodynamic characteristics of a model using a vectored-over-wing powered lift concept. The effects of spanwise nozzle throat area, internal and external nozzle geometry, and vertical and axial location were investigated. These effects were studied at a Mach number of 0.186 over an angle-of-attack range from 14 deg to 40 deg. A high pressure air system was used to provide jet-exhaust simulation. Engine nozzle pressure ratio was varied from 1.0 (jet off) to approximately 3.75.

Leavitt, L. D.↗
NASA NTRS1978

Aerodynamic characteristics induced on a supercritical wing due to vectoring twin nozzles at Mach numbers from 0.40 to 0.95

The induced lift characteristics are studied for a vectored-thrust concept in which jet-exhaust nozzles were located in the fuselage at the wing trailing edge. The wing had a supercritical airfoil section. The investigation was conducted at Mach numbers from 0.4 to 0.95, angles of attack up to 14 deg, and thrust coefficients up to 0.35, and nozzle deflection angles of 0 deg and 30 deg. Separate force balances were used to determine both total aerodynamic and thrust forces alone which allowed for a direct measurement of jet turning angle at forward speeds. The Reynolds number per meter varied from 8.20 x 1 million to 12.80 x 1 million. The results show that the configuration with the supercritical wing generally had a better performance with respect to both lift augmentation and drag reduction than the same configuration with a 64 series airfoil.

Capone, F. J.↗
NASA NTRS1978

Measurements of the Poynting vector of standing hydromagnetic waves at geosynchronous orbit

The observation is discussed of a train of hydromagnetic waves with a period of about 150 sec seen at synchronous orbit by the ATS 6 spacecraft on June 27, 1974. The critical observation is a phase shift of 90 deg between east-west oscillations of the particle flow and the east-west component of magnetic field oscillations. This phase shift alone suggests a standing rather than a propagating hydromagnetic wave. Careful processing of the particle data makes it possible to determine the drift velocity and hence the electric field of the wave. The wave electric field together with the time-varying magnetic field reveals an oscillating Poynting vector with zero mean component aligned with the ambient magnetic field and nonzero azimuthal (westward) component.

Cummings, W. D.↗
NASA NTRS1978

Vector space methods of photometric analysis - Applications to O stars and interstellar reddening

A multivariate vector-space formulation of photometry is developed which accounts for error propagation. An analysis of uvby and H-beta photometry of O stars is presented, with attention given to observational errors, reddening, general uvby photometry, early stars, and models of O stars. The number of observable parameters in O-star continua is investigated, the way these quantities compare with model-atmosphere predictions is considered, and an interstellar reddening law is derived. It is suggested that photospheric expansion affects the formation of the continuum in at least some O stars.

Massa, D.↗
NASA NTRS1978

Minimal order observers for linear functions of the state vector

The problem of estimating linear functions of a state vector in a multi-input/output system is considered. A simple lower bound on the observer order with arbitrary eigenvalues is established. Algorithms to construct minimal-order stable (or arbitrary dynamics) observers are also outlined.

Srinathkumar, S.↗
NASA NTRS1978

Plasma flows and magnetic field vectors in the plasma sheet during substorms

A detailed study of the plasma flow and the magnetic field vector in the plasma sheet during magnetospheric substorms is made to determine whether plasma flows are field-aligned or crossfield. It is shown that there is generally a large magnetic field-aligned component in the rapid plasma flow observed in the plasma sheet during substorms. In particular, the larger the observed flow speed, the closer the observed flow direction is aligned with the magnetic field line. There is no clear association between the plasma flow direction and the sign of the Bz component of the magnetic field during plasma sheet thinnings at substorms. The rapid plasma flows observed in the magnetotail are predominantly magnetic field-aligned.

Lui, A. T. Y.↗
NASA NTRS1979

Improved split-film vector anomometer

Split-film vector anemometer accurately measures magnitude and direction of fluid flow velocity in three-dimensional space using only one of three split films in three-prong split-film system. With procedure, one sensor develops all data previously required by three.

Scheiman, J.↗
NASA NTRS1978

Vector diagram of the chemical compositions of tektites and earth lavas

The chemical compositions of tektites and various volcanic glasses, similar in composition to tektites are compared by a petrochemical method. The advantage of the method is that a large number of chemical analyses of igneous rocks can be graphically compared with the help of vectors, plotted in relation to six parameters. These parameters, calculated from ratios of the main oxides given by silicate analysis, reflect the chief characteristics of igneous rock. Material for the study was suppled by data from chemical analysis characterizing tektites of all known locations and data from chemical analyses of obsidians similar in chemical composition to tektites of various petrographical provinces.

Kvasha, L. G.↗
NASA NTRS1978

The MAGSAT vector magnetometer: A precision fluxgate magnetometer for the measurement of the geomagnetic field

A description of the precision triaxial fluxgate magnetometer to be flown aboard the MAGSAT spacecraft is presented. The instrument covers the range of + or - 64,000 nT with a resolution of + or - 0.5 nT, an intrinsic accuracy of + or - 0.001% of full scale and an angular alignment stability of the order of 2 seconds of arc. It was developed at NASA's Goddard Space Flight Center and represents the state-of-the-art in precision vector magnetometers developed for spaceflight use.

Acuna, M. H.↗
NASA NTRS1979

A vector-continuous loading concept for aerodynamic panel methods

An approach to the reduction of discretization errors in aerodynamic panel methods is presented. The approach is based on preventing the occurence of induced velocity singularities at panel slope discontinuities by maintaining continuity of the velocity jump vector across the panels. The approach was implemented in a two-dimensional incompressible panel method formulation and evaluated by application to several external and internal flow problems. The method is shown to exhibit a second order accuracy trend and to produce smaller errors with velocity component boundary conditions imposed on the real flow than with equipotential boundary conditions imposed on the imaginary flow behind the panels. For flows around airfoil sections with either sharp or blunt trailing edges, the method gives excellent agreement with results from a well developed finite difference method. The method is well behaved and is insensitive to irregularities in panel size distribution.

Kemp, W. B., Jr.↗
NASA NTRS1979

An efficient technique for the computation of vector secondary patterns of offset paraboloid reflectors

A series approach for the rapid computation of the vector secondary pattern of offset paraboloid reflectors wherein the feed is displaced is presented. We show that the Jacobi polynomial series method, which has been demonstrated to provide an efficient means for evaluating the radiation integral of symmetric paraboloid reflectors, can be extended to the case of an offset paraboloid without compromising the ease or speed of computation. The analysis leading to the series formula is also useful for deriving an analytic expression for the optimum scan plane for the displacement of the feed. Representative numerical results illustrating the application of the method and the properties of the offset paraboloid are presented.

Mittra, R.↗
NASA NTRS1979

Space transportation system solid rocket booster thrust vector control system

The Solid Rocket Booster, Thrust Vector Control (TVC) system was designed in accordance with the following requirements: self-contained power supply, fail-safe operation, 20 flight uses after exposure to seawater landings, optimized cost, and component interchangeability. Trade studies were performed which led to the selection of a recirculating hydraulic system powered by Auxiliary Power Units (APU) which drive the hydraulic actuators and gimbal the solid rocket motor nozzle. Other approaches for the system design were studied in arriving at the recirculating hydraulic system powered by an APU. These systems must withstand the imposed environment and be usable for a minimum of 20 Space Transportation System flights with a minimum of refurbishment. The TVC system has completed the major portion of qualification and verification tests and is prepared to be cleared for the first Shuttle flight (STS-1). Substantiation data will include analytical and test data.

Verble, A. J., Jr.↗
NASA NTRS1979

Solid rocket booster thrust vector control subsystem verification test (V-2) report

The results of the verification testing sequence V-2 performed on the space shuttle solid rocket booster thrust vector control subsystem are presented. A detailed history of the hot firings plus additional discussion of the auxiliary power unit and the hydraulic component performance is presented. The test objectives, data, and conclusions are included.

Pagan, B.↗
NASA NTRS1980

User's guide for vectorized code EQUIL for calculating equilibrium chemistry on Control Data STAR-100 computer

A vectorized code, EQUIL, was developed for calculating the equilibrium chemistry of a reacting gas mixture on the Control Data STAR-100 computer. The code provides species mole fractions, mass fractions, and thermodynamic and transport properties of the mixture for given temperature, pressure, and elemental mass fractions. The code is set up for the electrons H, He, C, O, N system of elements. In all, 24 chemical species are included.

Kumar, A.↗
NASA NTRS1980

Design and development of the quad redundant servoactuator for the space shuttle solid rocket booster thrust vector control

The design and theory of operation of the servoactuator used for thrust vector control of the space shuttle solid rocket booster is described accompanied by highlights from the development and qualification test programs. Specific details are presented concerning major anomalies that occurred during the test programs and the corrective courses of action pursued.

Lominick, J. M.↗