Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Turbulent Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Reduced-order model based feedback control of the Modified Hasegawa-Wakatani model

In this work, the development of model-based feedback control that stabilizes an unstable equilibrium is obtained for the Modified Hasegawa-Wakatani (MHW) equations, a classic model in plasma turbulence. First, a balanced truncation (a model reduction technique that has proven successful in flow control design problems) is applied to obtain a low dimensional model of the linearized MHW equation. Then a model based feedback controller is designed for the reduced order model using linear quadratic regulators (LQR). Finally, a linear quadratic gaussian (LQG) controller, which is more resistant to disturbances is deduced. The controller is applied on the non-reduced, nonlinear MHW equations to stabilize the equilibrium and suppress the transition to drift-wave induced turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An explicit Runge-Kutta method for 3D turbulent incompressible flows

A computer code has been developed to solve for the steady-state solution of the 3D incompressible Reynolds-averaged Navier-Stokes equations. The approach is based on the cell-center, central-difference, finite-volume formulation and an explicit one-step, multistage Runge-Kutta time-stepping scheme. The Baldwin-Lomax turbulence model is used. Techniques to accelerate the rate of convergence to a steady-state solution include the preconditioned method, the local time stepping, and the implicit residual smoothing. Improvements in computational efficiency have been demonstrated in several areas. This numerical procedure has been used to simulate the turbulent horseshoe vortex flow around an airfoil/flat-plate juncture.

Sung, Chao-Ho↗

Laboratory and theoretical models of planetary-scale instabilities and waves

Research work is proceeding in theoretical, numerical, and experimental geophysical fluid dynamics leading up to a reflight of the GFFC (Geophysical Fluid Flow Cell Experiment) on USML-2. The work is intended not only to generate ideas for future space experiments, but to provide fundamental results concerned with nonlinear and chaotic properties of thermal convection and baroclinic waves in terrestrial and planetary atmospheres. The major efforts are focussed on thermal convection in a rapidly rotating annulus relevant to Jovian atmospheric dynamics, and on the chaotic behavior of baroclinic waves relevant to the Earth's atmosphere. The approach, in preparation for USML-2, is primarily theoretical and numerical. Mechanistic process models are solved numerically in order to identify physical mechanisms that may be observed in the GFFC, and which are important in real geophysical applications. The results from numerical simulations of geophysical fluid flow (subject to rotation and stratification) are compared with previous GFFC experiments on Spacelab-3 and with existing and proposed terrestrial laboratory experiments of various types. Pattern recognition algorithms have been employed to generate low-dimensional descriptions of the highly nonlinear and turbulent numerical simulations. Such empirically truncated descriptions provide for simplified but robust physical interpretations of the dynamics, as well as yielding highly efficient computations of these chaotic flows.

Hart, John E.↗

High-Order Simulation of Induced Disturbance in a Mach 6 Boundary Layer

Simulations of the early evolution of induced unstable disturbances in a Mach 6 hypersonic boundary layer are presented for the purposes of validating a high-order discontinuous Galerkin Navier-Stokes simulation code. The simulations are modeled after experiments performed in the Boeing/AFOSR Mach-6 Quiet Tunnel at Purdue University. In these experiments, a forcing mechanism was employed to induce reproducible disturbances in a hypersonic boundary layer providing for the controlled study of the growth and breakdown of these disturbances into turbulent spots. Simulations revealed that the form and strength of the excitation can greatly influence the growth of the disturbance. In particular, at large forcing amplitude, the simulated forcing produces large advecting transients that appear to enhance the growth of the wave packet, relative to that of low amplitude forcing. Simulation results with large amplitude forcing agree well with experimental results while results from low amplitude forcing agree with linear stability theory.

Atkins, Harold L.↗

Airplane wing vibrations due to atmospheric turbulence

The magnitude of error introduced due to wing vibration when measuring atmospheric turbulence with a wind probe mounted at the wing tip was studied. It was also determined whether accelerometers mounted on the wing tip are needed to correct this error. A spectrum analysis approach is used to determine the error. Estimates of the B-57 wing characteristics are used to simulate the airplane wing, and von Karman's cross spectrum function is used to simulate atmospheric turbulence. It was found that wing vibration introduces large error in measured spectra of turbulence in the frequency's range close to the natural frequencies of the wing.

Pastel, R. L.↗

Implicit Large-Eddy Simulation of Axisymmetric and Asymmetric Turbulent Shock Wave Boundary Layer Interaction at Mach 2.5

High-speed inlet flows feature turbulent shock wave boundary layer interactions at supersonic Mach numbers. A canonical Mach 2.5 shock wave boundary layer interaction experiment at the NASA Glenn Research Center was designed for axisymmetric and asymmetric interactions depending on the placement of the shock generator. Four different wall-resolved implicit large-eddy simulations of the experiment were carried out at one-tenth of the Reynolds number of the experiment: (1) Two axisymmetric interactions with shock generator radii of 9.2% and 14.7% of the test section diameter and (2) two asymmetric interactions with 14.7% shock generator radius and shock generator centerline offsets of one-third and one-fourth of the test section radius. For the two axisymmetric interactions, various sub-domains upstream of the interaction, within the interaction, and downstream of the interaction were analyzed with the proper orthogonal decomposition. For all three regions, the dominant modes are streamwise coherent structures with Strouhal numbers based on separation length of 0.15 and below. Fourier spectra of the wall-pressure coefficient for the interaction region have peaks at Strouhal numbers based on separation length of 0.15 and 0.04. For the two asymmetric interactions, the streamwise extent of the separation varies considerably in the azimuthal direction. For both shock generator offsets, the interaction is strongest for the azimuthal location that is closest to the shock generator. Compared to the axisymmetric interaction, the streamwise extent of the separated flow region is noticeably reduced and a substantial crossflow is observed. Fourier analyses of the unsteady flow indicate low-frequency content f or the upstream part of the interaction which is more two-dimensional. Away from the upstream region, with increasing sweep angle and crossflow, the low-frequency content is diminished.

Computational Fluid Dynamics↗

Turbulent Mixing of Multiphase Flow

Thus we conduct numerical simulations of multiphase fluids stirred by two-dimensional turbulence to assess the possibility of self-similar drop size distribution in turbulence. In our turbulence simulations, we also explore the non-diffusive limit, where molecular mobility for the interface is vanishing. Special care is needed to transport the non-diffusive interface. Numerically, we use the particle level set method to evolve the interface. Instead of using the usual methods to calculate the surface tension force from the level set function, we reconstruct the interface based on phase- field modeling, and calculate the continuum surface tension forcing from the reconstructed interface.

Young, Y.-N.↗

Idealized simulations of wind farm interactions with intermittent turbulence in stable boundary layer conditions

Stable atmospheric boundary layer conditions typically correspond to weak turbulence levels, but intermittent periods of elevated turbulence can occur during otherwise quiescent conditions. The interaction between intermittent turbulence and wind turbines is not well understood because of sparse observations, as well as the difficulty in realistically resolving small-scale turbulence during strongly stable conditions with numerical simulations. In this study, an explicit filtering and reconstruction approach for large-eddy simulation (LES) is used to simulate weakly and strongly stable conditions, with surface cooling rates of −0.2 and −2.0 K h −1 , respectively. This approach can sustain resolved background turbulence at relatively coarse grid spacing and stronger stratification compared to conventional closures, permitting more realistic intermittent stable boundary layer (SBL) turbulence. The idealized LES capability of the Weather Research and Forecasting model is employed with turbine rotors parameterized using generalized actuator disks to examine (1) how the presence of turbine wakes affects SBL evolution and (2) the effect of intermittent turbulence on power production and wake recovery. Wakes increase mixing and deepen the SBL, with a stronger effect under strongly stable conditions, primarily because the SBL is shallower and closer to the top of the wind turbine rotor layer. Intermittent turbulence does not have a significant impact on mean power generation and wake recovery because the relevant intermittent turbulent structures in this study only affect the bottom half of the rotor disk. Power production is, however, more variable during periods of elevated turbulence, demonstrating the impact of SBL intermittency. This study uses an idealized configuration, focusing on LES model performance and physical understanding, with the goal of informing future simulations of the conditions observed during the American Wake Experiment.

Energy - Wind↗

Toward a Fully Kinetic Theory of Turbulence in Magnetized Plasmas

This paper outlines the present status of the kinetic theory of turbulence in magnetized plasmas as being developed by the present author. The systematic program to formulate the theory of turbulence starting from the Vlasov-Klimontovich formalism began with the works by pioneers of modern plasma physics in the 1960s and 1970s. However, early efforts adopted the heuristic semi-classical method instead of the statistical mechanical formulation, which is necessary for a quantitative analysis. Recently, the present author picked up where the early pioneers left, and began to reformulate the kinetic turbulence theory of turbulence in magnetized plasmas from statistical mechanical formalism. This paper is a brief outline of the progress to date.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electrical studies and plasma characterization of an atmospheric pressure plasma jet operated at low frequency

Low-temperature, high-pressure plasma jets have an extensive use in medical and biological applications. Much work has been devoted to study these applications while comparatively fewer studies appear to be directed to the discharge itself. In this work, in order to better understand the kind of electrical discharge and the plasma states existing in those devices, a study of the electrical characteristics of a typical plasma jet, operated at atmospheric pressure, using either air or argon, is reported. It is found that the experimentally determined electrical characteristics are consistent with the model of a thermal arc discharge, with a highly collisional cathode sheet. The only exception is the case of argon at the smallest electrode separation studied, around 1 mm in which case the discharge is better modeled as either a non-thermal arc or a high-pressure glow. Also, variations of the electrical behavior at different gas flow rates are interpreted, consistently with the arc model, in terms of the development of fluid turbulence in the external jet.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Holocinematographic Velocimeter

Holographic movies used to study turbulent flows. High-speed movie composed of single-exposure holograms of tracer particles in each of two simultaneous orthogonal views of flow. Time resolution set by movie frame rate, and total time limited by length of movie. Data from system used to verify results of theoretical models and numerical simulations of turbulence, visualize and measure coherent structures in "non-simple" turbulent flows, to examine mechanisms operative in various turbulence-control/drag-reduction concepts.

Weinstein, Leonard M.↗

Framework Application for Core Edge Transport Simulation (FACETS)

The FACETS (Framework Application for Core-Edge Transport Simulations) project of Scientific Discovery through Advanced Computing (SciDAC) Program was aimed at providing a high-fidelity whole-tokamak modeling for the U.S. magnetic fusion energy program and ITER through coupling separate components for each of the core region, edge region, and wall, with realistic plasma particles and power sources and turbulent transport simulation. The project also aimed at developing advanced numerical algorithms, efficient implicit coupling methods, and software tools utilizing the leadership class computing facilities under Advanced Scientific Computing Research (ASCR). The FACETS project was conducted by a multi-discipline, multi-institutional teams, the Lead PI was J.R. Cary (Tech-X Corp.). In the FACETS project, the Applied Plasma Theory Group at the MAE Department of UCSD developed the Wall and Plasma-Surface Interaction (WALLPSI) module, performed its validation against experimental data, and integrated it into the developed framework. WALLPSI is a one-dimensional, coarse grained, reaction/advection/diffusion code applied to each material boundary cell in the common modeling domain for a tokamak. It incorporates an advanced model for plasma particle transport and retention in the solid matter of plasma facing components, simulation of plasma heat power load handling, calculation of erosion/deposition, and simulation of synergistic effects in strong plasma-wall coupling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Final Report for Grant DOE DE-FG02-08ER64573 (Relating to Turbulence Modeling)

Turbulence enhances transport and mixing. Turbulent ocean currents can increase the encounter rate between fish larvae and their prey. Without turbulence, the fuel and air injected into the cylinder of an internal combustion engine would mix too slowly to be effective. Birds extract energy from turbulent winds to soar for great distances without flapping their wings. Turbulence can be detrimental as well. The efficiencies of vehicles, pipelines, and industrial equipment are all hindered by turbulence. Turbulence can also cause structural fatigue, generate unwanted noise, and distort the propagation of electromagnetic signals. These observations highlight the importance of turbulence research. Our ability to predict and control turbulence and, thus, to intensify or suppress its effects as circumstances warrant is contingent on our understanding of the underlying mechanisms. Turbulence is also immensely interesting from a purely scientific perspective and is a great source of fundamentally important, challenging problems for physicists, engineers, and mathematicians. Moreover, various methods and tools developed in the field have found applications in other fields, including nonlinear optics, nonlinear acoustics, pattern formation, image processing, data compression, and econophysics. It is possible, at least away from walls, to derive LES models of very high-order accuracy. However, these models also lead to correspondingly intense computational complexity for their numerical solution. Some also introduce yet more questions on the already difficult problem of specifying needed and sometimes artificial local boundary conditions for the inherently nonlocal flow averages. For these two (and other) reasons, there has been a resurgence of interest in basing simulations of turbulent flows on much simpler regularizations of the Navier–Stokes equations rather than on full models of local averages--i.e., LES models. Initially these were developed as pure theoretical tools. The influx of ideas from LES and the added constraint that the regularization be amenable to numerical simulation have breathed new perspective and thus new life into this thread of ideas.Over the past year, a significant portion of our research activity has focused on numerical studies of the Navier–Stokes-$αβ$ model and extensions thereof. Our results regarding these and other approaches to turbulence modeling are described below.

97 MATHEMATICS AND COMPUTING↗

Analysis of equilibrium and turbulent fluxes across the separatrix in a gyrokinetic simulation

The SOL width is a parameter of paramount importance in modern tokamaks as it controls the power density deposited at the divertor plates, critical for plasma-facing material survivability. An understanding of the parameters controlling it has consequently long been sought. Prior to Chang et al. (2017 NF 57 11), studies of the tokamak edge have been mostly confined to reduced fluid models and simplified geometries, leaving out important pieces of physics. Here, we analyze the results of a DIII-D simulation performed with the full-f gyrokinetic code XGC1 which includes both turbulence and neoclassical effects in realistic divertor geometry. More specifically, we calculate the particle and heat E x B fluxes along the separatrix, discriminating between equilibrium and turbulent contributions. We find that the density SOL width is impacted almost exclusively by the turbulent electron flux. In this simulation, the level of edge turbulence is regulated by a mechanism we are only beginning to understand: grad-B-drifts and ion X-point losses at the top and bottom of the machine, along with ion banana orbits at the low field side (LFS), result in a complex poloidal potential structure at the separatrix which is the cause of the E x B drift pattern that we observe. Turbulence is being suppressed by the shear flows that this potential generates. At the same time, turbulence, along with increased edge collisionality and electron inertia, can influence the shape of the potential structure by making the electrons non-adiabatic. Furthermore, being the only means through which the electrons can lose confinement, it needs to be in a balance with the original direct ion orbit losses to maintain charge neutrality.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reduced-order model based feedback control of the modified Hasegawa-Wakatani model

In this work, the development of model-based feedback control that stabilizes an unstable equilibrium is obtained for the Modified Hasegawa-Wakatani (MHW) equations, a classic model in plasma turbulence. First, a balanced truncation (a model reduction technique that has proven successful in flow control design problems) is applied to obtain a low dimensional model of the linearized MHW equation. Then, a model-based feedback controller is designed for the reduced order model using linear quadratic regulators. Finally, a linear quadratic Gaussian controller which is more resistant to disturbances is deduced. The controller is applied on the non-reduced, nonlinear MHW equations to stabilize the equilibrium and suppress the transition to drift-wave induced turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

CFD flowfield simulation of Delta Launch Vehicles in a power-on configuration

This paper summarizes recent work at McDonnell Douglas Aerospace (MDA) to develop and validate computational fluid dynamic (CFD) simulations of under expanded rocket plume external flowfields for multibody expendable launch vehicles (ELVs). Multi engine reacting gas flowfield predictions of ELV base pressures are needed to define vehicle base drag and base heating rates for sizing external nozzle and base region insulation thicknesses. Previous ELV design programs used expensive multibody power-on wind tunnel tests that employed chamber/nozzle injected high pressure cold or hot-air. Base heating and pressure measurements were belatedly made during the first flights of past ELV's to correct estimates from semi-empirical engineering models or scale model tests. Presently, CFD methods for use in ELV design are being jointly developed at the Space Transportation Division (MDA-STD) and New Aircraft Missiles Division (MDA-NAMD). An explicit three dimensional, zonal, finite-volume, full Navier-Stokes (FNS) solver with finite rate hydrocarbon/air and aluminum combustion kinetics was developed to accurately compute ELV power-on flowfields. Mississippi State University's GENIE++ general purpose interactive grid generation code was chosen to create zonal, finite volume viscous grids. Axisymmetric, time dependent, turbulent CFD simulations of a Delta DSV-2A vehicle with a MB-3 liquid main engine burning RJ-1/LOX were first completed. Hydrocarbon chemical kinetics and a k-epsilon turbulence model were employed and predictions were validated with flight measurements of base pressure and temperature. Zonal internal/external grids were created for a Delta DSV-2C vehicle with a MB-3 and three Castor-1 solid motors burning and a Delta-2 with an RS-27 main engine (LOX/RP-1) and 9 GEM's attached/6 burning. Cold air, time dependent FNS calculations were performed for DSV-2C during 1992. Single phase simulations that employ finite rate hydrocarbon and aluminum (solid fuel) combustion chemistry are currently in progress. Reliable and efficient Eulerian algorithms are needed to model two phase (solid-gas) momentum and energy transfer mechanisms for solid motor fuel combustion products.

Pavish, D. L.↗

Overview of the relevant CFD work at Thiokol Corporation

An in-house developed proprietary advanced computational fluid dynamics code called SHARP (Trademark) is a primary tool for many flow simulations and design analyses. The SHARP code is a time dependent, two dimensional (2-D) axisymmetric numerical solution technique for the compressible Navier-Stokes equations. The solution technique in SHARP uses a vectorizable implicit, second order accurate in time and space, finite volume scheme based on an upwind flux-difference splitting of a Roe-type approximated Riemann solver, Van Leer's flux vector splitting, and a fourth order artificial dissipation scheme with a preconditioning to accelerate the flow solution. Turbulence is simulated by an algebraic model, and ultimately the kappa-epsilon model. Some other capabilities of the code are 2-D two-phase Lagrangian particle tracking and cell blockages. Extensive development and testing has been conducted on the 3-D version of the code with flow, combustion, and turbulence interactions. The emphasis here is on the specific applications of SHARP in Solid Rocket Motor design. Information is given in viewgraph form.

Chwalowski, Pawel↗