Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transit Solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Spinning the fuzzy sphere

Here, we construct various exact analytical solutions of the SO(3) BMN matrix model that correspond to rotating fuzzy spheres and rotating fuzzy tori. These are also solutions of Yang Mills theory compactified on a sphere times time and they are also translationally invariant solutions of the N = 1* field theory with a non-trivial chargedensity. The solutions we construct have a Ζ N symmetry, where N is the rank of the matrices. After an appropriate ansatz, we reduce the problem to solving a set of polynomial equations in 2N real variables. These equations have a discrete set of solutions for each value of the angular momentum. We study the phase structure of the solutions for various values of N . Also the continuum limit where N → ∞, where the problem reduces to finding periodic solutions of a set of coupled differential equations. We also study the topology change transition from the sphere to the torus.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Stationary phase method and delay times for relativistic and non-relativistic tunneling particles

The stationary phase method is frequently adopted for calculating tunneling phase times of analytically-continuous Gaussian or infinite-bandwidth step pulses which collide with a potential barrier. This report deals with the basic concepts on deducing transit times for quantum scattering: the stationary phase method and its relation with delay times for relativistic and non-relativistic tunneling particles. After reexamining the above-barrier diffusion problem, we notice that the applicability of this method is constrained by several subtleties in deriving the phase time that describes the localization of scattered wave packets. Using a recently developed procedure - multiple wave packet decomposition - for some specifical colliding configurations, we demonstrate that the analytical difficulties arising when the stationary phase method is applied for obtaining phase (traversal) times are all overcome. In this case, we also investigate the general relation between phase times and dwell times for quantum tunneling/scattering. Considering a symmetrical collision of two identical wave packets with an one-dimensional barrier, we demonstrate that these two distinct transit time definitions are explicitly connected. The traversal times are obtained for a symmetrized (two identical bosons) and an antisymmetrized (two identical fermions) quantum colliding configuration. Multiple wave packet decomposition shows us that the phase time (group delay) describes the exact position of the scattered particles and, in addition to the exact relation with the dwell time, leads to correct conceptual understanding of both transit time definitions. At last, we extend the non-relativistic formalism to the solutions for the tunneling zone of a one-dimensional electrostatic potential in the relativistic (Dirac to Klein-Gordon) wave equation where the incoming wave packet exhibits the possibility of being almost totally transmitted through the potential barrier. The conditions for the occurrence of accelerated and, eventually, superluminal tunneling transmission probabilities are all quantified and the problematic superluminal interpretation based on the non-relativistic tunneling dynamics is revisited. Lessons concerning the dynamics of relativistic tunneling and the mathematical structure of its solutions suggest revealing insights into mathematically analogous condensed-matter experiments using electrostatic barriers in single- and bi-layer graphene, for which the accelerated tunneling effect deserves a more careful investigation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Design of an advanced energy management system for microgrid control using a state machine

A state machine is proposed as the solution for an automated microgrid energy management system (EMS) to improve transient performance during transition operations. It characterizes microgrid operation by seven states that cover all the operating modes: two for steady-state operation (grid-connected and islanded), four for transition operation (preparing for disconnection, transitioning to islanding, preparing for reconnection, and transitioning to grid-connected), and one for emergency operation (black-start operation). A unique dispatch algorithm is developed for each state to achieve the control objective, and the transition function is implemented in the state machine as control logics to transition the system from one state to the next. The feasibility and effectiveness of the developed state machine is validated by simulation in MATLAB with an example microgrid, and the test results show excellent performance of the state machine to achieve the target control objective in each state and to improve the system's transient performance during transition operation.

36 MATERIALS SCIENCE↗

Machine-learning and first-principles investigation of lightweight medium-entropy alloys for hydrogen-storage applications

The transition to a low-carbon economy demands efficient and sustainable energy-storage solutions, with hydrogen emerging as a promising clean-energy carrier and with metal hydrides recognized for their hydrogen-storage capacity. Here, we leverage machine learning (ML) to predict hydrogen-to-metal (H/M) ratios and solution energy by incorporating thermodynamic parameters and local lattice distortion (LLD) as key features. Our best-performing ML model provides improvements to H/M ratios and solution energies over a broad class of medium-entripy alloys (easily extendable to multi-principal-element alloys), such as Ti–Nb-X (X = Mo, Cr, Hf, Ta, V, Zr) and Co–Ni-X (X = Al, Mg, V). Ti–Nb–Mo alloys reveal compositional effects in H-storage behavior, in particular Ti, Nb, and V enhance H-storage capacity, while Mo reduces H/M and hydrogen weight percent by 40–50 %. We attributed results in molybdenum-rich alloys to slow hydrogen kinetics, as validated by our pressure-composition-temperature (PCT) isotherm experiments on pure Ti and Ti 5 Mo 95 alloys. Density functional theory (DFT) and molecular dynamics (MD) simulations also confirm that Ti and Nb promote H diffusion, whereas Mo hinders it, highlighting the interplay between electronic structure, lattice distortions, and hydrogen uptake. Notably, our Gradient Boosting Regression model identifies LLD as a critical factor in H/M predictions. Here, to aid material selection, we present two periodic tables illustrating elemental effects on (a) H 2 wt% and (b) solution energy, derived from ML, and provide a reference for identifying alloying elements that enhance hydrogen solubility and storage.

08 HYDROGEN↗

Navigating the Use of Direct Current in Residential Settings: Merits and Obstacles

This review paper provides an in-depth analysis of the role of Direct Current (DC) power systems in residential settings, focusing on their safety, efficiency, and environmental advantages. It recognizes the significant contribution of the residential sector to global carbon dioxide emissions and explores how DC power systems can help mitigate these effects. The paper traces the historical evolution of DC power, its resurgence with renewable energy technologies, and the advancements in power electronics that facilitate its integration. Emphasizing the efficiency and safety benefits, especially in low-voltage applications, the paper highlights the seamless integration of DC systems with inherently DC-generating renewable sources like solar PV and wind. The review discusses the critical role of converter technologies in the transition to DC power and examines the compatibility of DC systems with energy storage solutions, underscoring their potential for enhanced energy management. It also addresses the environmental impacts of adopting DC power, aligning with global carbon reduction efforts. The paper analyzes regional case studies, exploring practical applications and outcomes, and addresses challenges such as the need for standardization. It concludes with recommendations for stakeholders and future research directions, emphasizing the economic, technological, and environmental aspects of DC power systems. Overall, the paper presents DC power as a viable and sustainable option for residential energy conservation, contingent upon ongoing technological progress, supportive policies, and standardization.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Structural and electrical properties evolution in Ba{sub 1-x}Sr{sub x}RuO{sub 3} synthesized under high pressure

The 6H and 6M Ba{sub 1-x}Sr{sub x}RuO{sub 3} at x<=0.6 with the normal and distorted hexagonal BaTiO{sub 3} structures were synthesized by using high-pressure and high-temperature method. It is found that the unit cell volume deviates from Vegard's law between 0.3 and 0.4 for the solid solutions due to the increasing distortion degree of crystal structure. With the increasing x, the electrical resistivity at the same temperature is increasing. With the substitution of Sr for Ba ion, the 6H BaRuO{sub 3} transforms to a Fermi-liquid metal at x=0.25 from the primal non-Fermi-liquid metal, and then becomes a semiconductor at low temperature when x is larger than 0.4. - Graphical abstract: The 6H (x<=0.3) and 6M (0.4<=x<=0.6) Ba{sub 1-x}Sr{sub x}RuO{sub 3} solutions synthesized under high pressure adopt the normal and distorted hexagonal BaTiO{sub 3} structures, respectively.

36 MATERIALS SCIENCE↗

Synthesis and characterization of CuO nanofibers, and investigation for its suitability as blocking layer in ZnO NPs based dye sensitized solar cell and as photocatalyst in organic dye degradation

Electrospun copper based composite nanofibers were synthesized using the copper acetate/polyvinyl alcohol/water solution as starting material. Synthesized composite nanofibers were sintered at 500 Degree-Sign C to obtain CuO nanofibers. XRD, FTIR and XPS techniques were used to confirm the presence of pure CuO nanostructures. The effect of annealing cycle on the crystalline structure of the CuO nanofibers was analyzed and observed that the decrease in crystallite size with an increase in the dwelling time improved the orientation of the CuO crystallite. The blue-shift in the band-gap energies of CuO nanofibers was observed as a result of quantum confinement from bulk CuO (1.2 eV) to one dimensional (1D) nanostructures ({approx}1.746 eV). The catalytic activity of the CuO fibers for the degradation of methyl orange was carried out and as a blocking layer in ZnO based DSSC was fabricated and observed a {approx}25% increase in the current density. - Graphical abstract: The study on the suitability of highly crystalline CuO nanofibers as the blocking layer in ZnO based DSSC was demonstrated and fabricated with possible energy applications. Highlights: Black-Right-Pointing-Pointer CuO nanofibers were successfully synthesized by using electrospinning technique. Black-Right-Pointing-Pointer The effect of the dwelling time of the annealing cycle for the formation of the crystallite CuO nanofibers was analyzed. Black-Right-Pointing-Pointer A 25% increase in the current density was observed with the application of CuO as blocking layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation of nanosheet by exfoliation of layered iron phenyl phosphate under ultrasonic irradiation

Synthetic layered iron phenyl phosphate (Fe(OH)(C{sub 6}H{sub 5}PO{sub 4}H){sub 1.6}(H{sub 2}PO{sub 4}){sub 0.4}.5.1H{sub 2}O: FePP), which is composed of a multilayer alternating bilayer of phenyl groups of the phosphates and amorphous iron phosphate phase, was exfoliated in ethanol under ultrasonic irradiation. The exfoliation of FePP was recognized at 10-10,000 ppm of FePP concentration. No reaggregation and reprecipitation of the nanosheets took place for at least 6 months of standing at room temperature. The UV-vis measurements indicated that the nanosheet dispersing solution possessed a UV absorption property which would be due to the charge transfer transition of Fe-O. The FePP nanosheet-doped silica gel with UV absorption property could be prepared by sol-gel process. The Beer's plot and EDX elemental mapping analysis for Fe and P revealed that the nanosheets are homogeneously dispersed in the silica gels.

36 MATERIALS SCIENCE↗

Mechanical properties and leaching modeling of activated incinerator bottom ash in Portland cement blends

In the present study the evolution of mechanical strength and the leaching behavior of major and trace elements from activated incinerator bottom ash/Portland cement mixtures were investigated. Chemical and mechanical activation were applied with the purpose of improving the reactivity of bottom ash in cement blends. Chemical activation made use of NaOH, KOH, CaCl{sub 2} or CaSO{sub 4}, which were selected for the experimental campaign on the basis of the results from previous studies. The results indicated that CaCl{sub 2} exhibited by far the best effects on the evolution of the hydration process in the mixtures; a positive effect on mechanical strength was also observed when CaSO{sub 4} was used as the activator, while the gain in strength produced by KOH and NaOH was irrelevant. Geochemical modeling of the leaching solutions provided information on the mineral phases responsible for the release of major elements from the hardened materials and also indicated the important role played by surface sorption onto amorphous Fe and Al minerals in dictating the leaching of Pb. The leaching of the other trace metal cations investigated (Cu, Ni and Zn) could not be explained by any pure mineral included in the thermodynamic database used, suggesting they were present in the materials in the form of complex minerals or phase assemblages for which no consistent thermodynamic data are presently available in the literature.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Stability of a tokamak plasma with diffuse toroidal rotation

The present work considers the stability of a high- $\beta$ , large aspect ratio, circular plasma with diffuse profiles for the safety factor and the angular toroidal frequency (López & Guazzotto, Phys. Plasmas , vol. 24, 032501). An application of the Frieman–Rotenberg formalism results in a system of scalar eigenmode equations whose coupling is retained at the plasma–vacuum transition but is disregarded across the plasma column, which is a standard practice. The solution technique consists of a multidimensional shooting method for the poloidal harmonics; robust initial guesses are constructed by solving the dispersion relation in the static scenario with vanishing magnetic shear. Flow shear appears as a high- $\beta$ toroidal contribution, and we illustrate its destabilizing influence on $n=1$ external kink modes in the presence of ideal and resistive walls. Internal resonances are avoided by means of the selection of appropriate equilibrium parameters. The stabilizing influence of a finite positive average magnetic shear is also exemplified.

Physics↗

Gate-All-Around Nanowire Field-Effect Transistors: A Historical Perspective

The development of transistor architectures, evolving from 2D planar metal-oxide-semiconductor field-effect transistors (MOSFETs) to FinFETs and then to gate-all-around nanowire (GAANW) FETs, plays a crucial role in downscaling technology nodes in the semiconductor industry. This perspective reviews the concept of MOSFETs and summarizes this historical development with particular emphasis on GAANW transistors due to their importance in next-generation technology for nodes below 3 nm. Specifically, the concept of GAANW transistors and their advantages over planar and FinFET devices for further scaling are presented, along with a discussion of their transition from early conceptual ideas to laboratory demonstrations and, ultimately, industrial adoption. Furthermore, potential solutions, such as complementary FETs (CFETs) and 2D semiconductor-based FETs, and their associated challenges for the future generation, known as the Angstrom Era, are discussed in a technological roadmap. In conclusion, this perspective may inspire both industry and academia in future research directions for realizing the Angstrom Era.

gate-all-around transistors↗

A Self-Limiting Electro-Ablation Technique for the Top-Down Synthesis of Large-Area Monolayer Flakes of 2D Materials

We report the discovery of an electrochemical process that converts two dimensional layered materials of arbitrary thicknesses into monolayers. The lateral dimensions of the monolayers obtained by the process within a few seconds time at room temperature were as large as 0.5 mm. The temporal and spatial dynamics of this physical phenomenon, studied on MoS2 flakes using ex-situ AFM imaging, Raman mapping, and photoluminescence measurements trace the origin of monolayer formation to a substrate-assisted self-limiting electrochemical ablation process. Electronic structure and atomistic calculations point to the interplay between three essential factors in the process: (1) strong covalent interaction of monolayer MoS2 with the substrate; (2) electric-field induced differences in Gibbs free energy of exfoliation; (3) dispersion of MoS2 in aqueous solution of hydrogen peroxide. This process was successful in obtaining monolayers of other 2D transition metal dichalcogenides, like WS2 and MoTe2 as well.

36 MATERIALS SCIENCE↗

COMPARATIVE ANALYSIS OF SELECTED EDDY CURRENT TRANSDUCERS FOR TITANIUM ALLOY EVALUATION

Titanium alloy based details due to their mechanical properties continue to be in extensive use in various structures (mainly aerospace, automotive and petro-chemical industrial applications). In this paper comparative study of various types of eddy current NDT transducers for testing titanium elements was done. Probes of absolute, differential and array configurations were constructed and analyzed. Two and three dimensional numerical analysis (FEM) were done in order to find the best type and configuration of the proposed transducers.

36 MATERIALS SCIENCE↗

Physical and chemical characterization of combinatorial metal gate electrode Ta-C-N library film

This paper reports comprehensive structural and chemical analyses for the combinatorial Ta-C-N/HfO{sub 2} system, crucial data for understanding the electrical properties of Ta-C-N/HfO{sub 2}. Combinatorial Ta-C-N 'library' (composition spread) films were deposited by magnetron sputtering. Electron probe wavelength dispersive spectroscopy and x-ray fluorescence-yield near-edge spectroscopy were used to quantitatively determine the composition across these films. Scanning x-ray microdiffractometry determined that a solid solution of Ta(C,N){sub x} forms and extends to compositions (0.3<=Ta<=0.5 and 0.57<=Ta<=0.67) that were previously unknown. The thermal stability of the Ta-C-N/HfO{sub 2} library was studied using high resolution transmission electron microscopy, which shows Ta-C-N/HfO{sub 2}/SiO{sub 2}/Si exhibiting good thermal stability up to 950 deg. C.

36 MATERIALS SCIENCE↗

A New FE Modeling Method for Isothermal Local Loading Process of Large-scale Complex Titanium Alloy Components Based on DEFORM-3D

Isothermal local loading process provides a new way to form large-scale complex titanium alloy components. The forming process is characterized by an extreme size (large scale in global and compared small size in regional), multi-parameter effects, and complicated loading path. To establish a reasonable finite element model is one of the key problems urgently to be solved in the research and development of isothermal local loading forming process of large-scale complex titanium alloy components. In this paper, a new finite element model of the isothermal local loading process is developed under the DEFORM-3D environment based on the solution of some key techniques. The modeling method has the following features: (1) different meshing techniques are used in different loading areas and the number of meshed elements is determined according to the deformation characteristic in different local loading steps in order to improve computational efficiency; (2) the accurate magnitude of the friction factor under titanium alloy hot forming (isothermal forming) condition is adopted instead of the typical value for lubricated hot forming processes; (3) different FEM solvers are chosen at different stages according to the loading characteristic and the contact state; (4) in contrast to the local component model, a full 3D component is modeled to simulate the process. The 3D-FE model is validated by experimental data of a large-scale bulkhead forming under isothermal local loading. The model can describe the quantitative relationships between the forming conditions and the forming results. The results of the present study may provide a basis for studying the local deformation mechanism, selecting the reasonable parameters, optimizing the die design and the process control in isothermal local loading process of large-scale complex titanium alloy components.

36 MATERIALS SCIENCE↗

Scalar and Pseudoscalar Glueballs Revisited

Using two simple and robust inputs to constrain the mixing matrix of the isosinglet scalar mesons f{sub 0}(1710), f{sub 0}(1500), f{sub 0}(1370), we have shown that in the SU(3) symmetry limit, f{sub 0}(1500) becomes apure SU(3) octet and is degenerate with a{sub 0}(1450), while f{sub 0}(1370) is mainly an SU(3) singlet with a slight mixing with the scalar glueball which is the primary component of f{sub 0}(1710). These features remain essentially unchanged even when SU(3) breaking is taken into account. We have deduced the mass of the pseudoscalar glueball G from an {eta}-{eta}{sup '}-G mixing formalism based on the anomalous Ward identity for transition matrix elements. With the inputs from the recent KLOE experiment, we found a solution for the pseudoscalar glueball mass around (1.4{+-}0.1) GeV. This affirms that 77 (1405), having a large production rate in the radiative J/{Psi} decay and not seen in {gamma}{gamma} reactions, is indeed a leading candidate for the pseudoscalar glueball. It is much lower than the results from quenched lattice QCD (> 2.0 GeV).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nonequilibrium alloy formation in the immiscible Cu-Mo system studied by thermodynamic calculation and ion beam mixing

For the equilibrium immiscible Cu-Mo system characterized by a positive heat of formation (+19 kJ mol{sup -1}), thermodynamic calculation showed that by adding an adequate interfacial free energy, the Gibbs free energy of the Cu-Mo multilayered films could be elevated up to a higher level than the convex-shaped free energy curve of the amorphous phase and supersaturated solid solutions. Accordingly, ion beam mixing of the Cu-Mo multilayered samples did result in forming a unique amorphous phase with an alloy composition around 80 at. % Mo and two supersaturated solid solutions of fcc and bcc structures at around 27 at. % and 90 at. % Mo, respectively, matching well with the thermodynamic calculation.

36 MATERIALS SCIENCE↗

Experimental and Numerical Investigation of Forming and Springback Behavior and the Resulting Effects on Industrial Application on a Structural Part in Mass Production

Springback prediction and compensation is nowadays a widely recommended discipline in finite element modeling. Many researches have shown an improvement of the accuracy in prediction of springback using advanced modeling techniques, e.g. by including the Bauschinger effect. In this work different models were investigated in the commercial simulation program AutoForm for a large series production part, manufactured from the dual phase steel HC340XD. The work shows the differences between numerical drawbead models and geometrically modeled drawbeads. Furthermore, a sensitivity analysis was made for a reduced kinematic hardening model, implemented in the finite element program AutoForm.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗