Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Strong interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Beam-beam effects in the Super Proton-Proton Collider

The Supper Proton-Proton Collider is a next-generation hadron collider that is now being designed. A baseline design aims for a peak luminosity of about 1*10^35 cm^-2 s^-1. The focus of this article is the effect of beam-beam interactions which are expected to strongly influence stability in the beams. We start with a discussion of a scheme to generate the crossing angles at the interaction points while also correcting the dispersion thus created. The optics constraints on the achievable \b{eta}* were studied. Weak-strong simulations were performed to study single particle dynamics via tune footprints, frequency map analysis and dynamic aperture calculations. The long-range interactions with the smallest separations are shown to determine the dynamic aperture. Empirical scaling laws for the dependence of the dynamic aperture on the transverse separations and on the number of long-range interactions are found. A tune scan shows several alternative working points with slightly better dynamic aperture than the baseline choice. Finally an option to significantly increase the dynamic aperture by increasing the crossing angle for different choices of \b{eta}* was studied.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Observing Chemical and Morphological Changes in a Cu@TiO x Core@Shell Catalyst: Impact of Reversible Metal-Oxide Interactions on CO 2 Activation and Hydrogenation

A combination of several in-situ techniques (XRD, XAS, AP-XPS, E-TEM) was used to explore links between the structural and chemical properties of a Cu@TiO x catalyst under CO 2 hydrogenation conditions. The active phase of the catalyst involved an inverse oxide/metal configuration, but the initial core@shell motif was disrupted during the pre-treatment in H 2 . As a consequence of strong metal-support interactions, the titania shell cracked and Cu particles migrated from the core to on top of the oxide with the simultaneous formation of a Cu-Ti-O x phase. The generated Cu particles had a diameter of 20-40 nm and were decorated by small clusters of TiO x (< 5 nm in size). Results of in-situ XAS and XRD and images of E-TEM showed a very dynamic system, where the inverse oxide/metal configuration promoted the reactivity of the system towards CO 2 and H 2 . At room temperature, CO 2 oxidized the Cu nanoparticles (CO 2,gas → CO gas + O oxide ) inducing a redistribution of the TiO x clusters and big modifications in catalyst surface morphology. The generated oxide overlayer disappeared at elevated temperatures (> 180 °C) upon exposure to H 2 , producing a transient surface that was very active for the reverse water-gas shift reaction (CO 2 + H 2 → CO + H 2 O) but was not stable at 250 °C. When oxidation and reduction occurred at the same time, under a mixture of CO 2 and H 2 , the surface structure evolved toward a dynamic equilibrium that strongly depended on the temperature. Neither CO 2 nor H 2 can be considered as passive reactants. In the Cu@TiO x system, morphological changes were linked to variations in the composition of metal-oxide interfaces which were reversible with temperature or chemical environment and affected the catalytic activity of the system. Finally, the present study illustrates the dynamic nature of phenomena associated with the trapping and conversion of CO 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2024

Prediction of ambient pressure superconductivity in cubic ternary hydrides with MH 6 octahedra

Exploring high-temperature superconducting (high-T c ) material at ambient pressure holds immense significance for physics, chemistry, and materials science. In this study, we perform a high-throughput screening of strong electron-phonon interactions in X 2 MH 6 compounds (X = Li, Na, Mg, Al, K, Ca, Ga, Rb, Sr, and In; M are 3d, 4d, and 5d transition metals). These compounds have a cubic structure featuring an MH 6 octahedron motif. Our screening calculations suggest that 26 compounds exhibit dynamic stability and strong electron-phonon coupling. Among them, Mg 2 RhH 6 , Mg 2 IrH 6 , Al 2 MnH 6 , and Li 2 CuH 6 show promising energetic stability and T c of more than 50 K at ambient pressure. This study underscores promising high-T c compounds at ambient pressure with distinctive MH 6 motifs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Kohn anomalies and phonon anharmonicity in iridium

Elemental iridium presents surprising challenges for both inelastic neutron scattering (INS) and theoretical thermal transport calculations due to its high neutron absorption cross-section and strong electron-phonon interactions, respectively. Here, in this study, we overcome these challenges to measure temperature-dependent phonon dispersion curves, compare these with calculations based on density functional theory (DFT), and ultimately examine the electron-phonon limited transport behaviors of this material. Our DFT calculations demonstrate Kohn anomalies, near the 𝐾 point of the iridium Brillouin zone, indicating coupling between electrons and phonons. Strong electron-phonon coupling can compete with anharmonic effects to determine electrical and thermal transport behaviors and make the Kohn anomalies challenging to observe. Nonetheless, our INS measurements map these anomalies and other dispersion features over the Brillouin zone from 100 to 700 K. These measurements also uncover unexpectedly large mode specific Grüneisen parameters obtained from the temperature-dependent phonon energies, highlighting strong anharmonicity in iridium. DFT-based Boltzmann transport calculations demonstrate how anharmonicity and electron-phonon couplings determine electronic and lattice transport behaviors. Furthermore, we correlate the Kohn anomalies with calculated electron-phonon nesting functions, Fermi surfaces, and DFT-derived coupling strengths. This study provides detailed insights into the temperature-dependent mode-resolved lattice dynamics and anharmonicity, transport behavior, and electron-phonon interactions.

DFT↗
DOE OSTI2026

Vapor-cavity-QED system for quantum computation and communication

In this work, we propose performing key operations in quantum computation and communication using room-temperature atoms moving across a grid of high-quality-factor, small-mode-volume cavities. These cavities enable high-cooperativity interactions with single atoms to be achieved with a characteristic timescale much shorter than the atomic transit time, allowing multiple coherent operations to take place. We study scenarios where we can drive a Raman transition to generate photons with specific temporal shapes and to absorb, and hence detect, single photons. The strong atom-cavity interaction can also be used to implement the atom-photon controlled-phase gate, which can then be used to construct photon-photon gates, create photonic cluster states, and perform nondemolition detection of single photons. We provide numerics validating our methods and discuss the implications of our results for several applications.

Austin, Sharoon [National Institute of Standards a↗
DOE OSTI2023

Excitonic Interactions and Mechanism for Ultrafast Interlayer Photoexcited Response in van der Waals Heterostructures

Optical dynamics in van der Waals heterobilayers is of fundamental scientific and practical interest. Based on a time-dependent adiabatic GW approach, we discover a new many-electron (excitonic) channel for converting photoexcited intralayer to interlayer excitations and the associated ultrafast optical responses in heterobilayers, which is conceptually different from the conventional single-particle picture. We find strong electron-hole interactions drive the dynamics and enhance the pump-probe optical responses by an order of magnitude with a rise time of ~3⁢0⁢0 fs in MoSe 2 /WSe 2 heterobilayers, in agreement with experiment.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Compositional phase stability of correlated electron materials within DFT+DMFT

Predicting the compositional phase stability of strongly correlated electron materials is an outstanding challenge in condensed matter physics, requiring precise computations of total energies. In this work, we employ the density functional theory plus dynamical mean-field theory (DFT+DMFT) formalism to address local correlations due to transition metal $\textit{d}$ electrons on compositional phase stability in the prototype rechargeable battery cathode material Li x CoO 2 , and detailed comparisons are made with the simpler DFT+$\textit{U}$ approach (i.e., the Hartree-Fock solution of the DMFT impurity problem). Local interactions are found to strongly impact the energetics of the band insulator LiCoO 2 , most significantly via the $E_g$ orbitals, which are partially occupied via hybridization with $\textit{O p}$ states. We find CoO 2 and Li 1/2 CoO 2 to be moderately correlated Fermi liquids with quasiparticle weights of 0.6–0.8 for the $T_{2g}$ states, which are most impacted by the interactions. Further, as compared to DFT+$\textit{U}$, DFT+DMFT considerably dampens the increase in total energy as $\textit{U}$ is increased, which indicates that dynamical correlations are important to describe this class of materials despite the relatively modest quasiparticle weights. Unlike DFT+$\textit{U}$, which can incorrectly drive Li x CoO 2 toward spurious phase separating or charge-ordered states, DFT+DMFT correctly captures the system's phase stability and does not exhibit a strong charge-ordering tendency. Most importantly, the error within DFT+$\textit{U}$ varies strongly as the composition changes, challenging the common practice of artificially tuning $\textit{U}$ within DFT+$\textit{U}$ to compensate the errors of Hartree-Fock. DFT+DMFT predicts the average intercalation voltage decreases relative to DFT, opposite to the result of DFT+$\textit{U}$, which would yield favorable agreement with experiment in conjunction with the overprediction of the voltage by the strongly constrained and appropriately normed DFT functional.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Anomalous interactions between mesons with nonzero spin and glueballs

Topologically nontrivial fluctuations control the anomalous interactions for the η and η ′ pseudoscalar mesons. We consider the anomalous interactions for mesons with higher spin, the heterochiral nonets with J P C = 1 + − and 2 − + . Under the approximation of a dilute gas of instantons, the mixing angle between nonstrange and strange mesons decreases strongly as J increases, and oscillates in sign. Anomalous interactions also open up new, rare decay channels. For glueballs, anomalous interactions indicate that the X ( 2600 ) state is primarily gluonic. Published by the American Physical Society 2024

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Structural Basis of Ligand Selectivity by a Bacterial Adhesin Lectin Involved in Multispecies Biofilm Formation

Carbohydrate recognition by lectins governs critical host-microbe interactions. MpPA14 (Marinomonas primoryensis PA14 domain) lectin is a domain of a 1.5-MDa adhesin responsible for a symbiotic bacterium-diatom interaction in Antarctica. Here, we show that MpPA14 binds various monosaccharides, with l-fucose and N-acetylglucosamine being the strongest ligands (dissociation constant [K d ], ~150 μM). High-resolution structures of MpPA14 with 15 different sugars bound elucidated the molecular basis for the lectin’s apparent binding promiscuity but underlying selectivity. MpPA14 mediates strong Ca 2+ -dependent interactions with the 3,4-diols of l-fucopyranose and glucopyranoses, and it binds other sugars via their specific minor isomers. Thus, MpPA14 only binds polysaccharides like branched glucans and fucoidans with these free end groups. Consistent with our findings, adhesion of MpPA14 to diatom cells was selectively blocked by l-fucose, but not by N-acetyl galactosamine. The MpPA14 lectin homolog present in a Vibrio cholerae adhesin was produced and was shown to have the same sugar binding preferences as MpPA14. The pathogen’s lectin was unable to effectively bind the diatom in the presence of fucose, thus demonstrating the antiadhesion strategy of blocking infection via ligand-based antagonists.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Tagging efficiency study of incoherent diffractive vector meson production at the second interaction region at the Electron-Ion Collider

The Electron-Ion Collider (EIC) is an upcoming accelerator facility aimed at exploring the properties of quarks and gluons in nucleons and nuclei, shedding light on their structure and dynamics. The inaugural experimental apparatus, ePIC (electron-Proton and Ion Collider), is designed as a general-purpose detector to address the National Academy of Sciences and the Nuclear Science Advisory Committee physics program at the EIC. The wider EIC community is strongly supporting a second interaction region and an associated second detector to enhance the full science program. In this study, we evaluate how this second interaction region and detector can be complementary to ePIC. The layout of an interaction region for the second detector offers a secondary focus that provides better forward detector acceptance at scattering angles near θ ~ 0 mrad, which can specifically enhance the exclusive, tagging, and diffractive physics program. Here, this article presents an analysis of a tagging program using the second interaction region layout with incoherent diffractive vector meson production. The current design of the second EIC interaction region is evaluated for its vetoing capabilities of incoherent events required for the study of coherent diffractive measurements. We find an increased vetoing performance compared to the ePIC interaction region, thus improving measurements which are important for the spatial imaging of nucleons and nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

A Causal Inference Model Based on Random Forests to Identify the Effect of Soil Moisture on Precipitation

Soil moisture influences precipitation mainly through its impact on land–atmosphere interactions. Understanding and correctly modeling soil moisture–precipitation (SM–P) coupling is crucial for improving weather forecasting and subseasonal to seasonal climate predictions, especially when predicting the persistence and magnitude of drought. However, the sign and spatial structure of SM–P feedback are still being debated in the climate research community, mainly due to the difficulty in establishing causal relationships and the high degree of nonlinearity in land–atmosphere processes. To this end, we developed a causal inference model based on the Granger causality analysis and a nonlinear machine learning model. This model includes three steps: nonlinear anomaly decomposition, nonlinear Granger causality analysis, and evaluation of the quality of SM–P feedback, which eliminates the nonlinear response of interannual and seasonal variability and the memory effects of climatic factors and isolates the causal relationship of local SM–P feedback. We applied this model by using National Climate Assessment–Land Data Assimilation System (NCA-LDAS) datasets over the United States. Here, the results highlight the importance of nonlinear atmosphere responses in land–atmosphere interactions. In addition, the strong feedback over the southwestern United States and the Great Plains both highlight the impacts of topographic factors rather than only the sensitivity of evapotranspiration to soil moisture. Furthermore, the SM–P index defined by our framework is used to benchmark Earth system models (ESMs), which provides a new metric for efficiently identifying potential model biases in modeling local land–atmosphere interactions and may help the development of ESMs in improving simulations of water cycle variability and extremes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Quantum algorithm for polaritonic chemistry based on an exact ansatz

Abstract Cavity-modified chemistry uses strong light-matter interactions to modify the electronic properties of molecules in order to enable new physical phenomena such as novel reaction pathways. As cavity chemistry often involves critical regions where configurations become nearly degenerate, the ability to treat multireference problems is crucial to understanding polaritonic systems. In this Letter, we show through the use of a unitary ansatz derived from the anti-Hermitian contracted Schrödinger equation that cavity-modified systems with strong correlation, such as the deformation of rectangular H 4 coupled to a cavity mode, can be solved efficiently and accurately on a quantum device. In contrast, while our quantum algorithm can be made formally exact, classical-computing methods as well as other quantum-computing algorithms often yield answers that are both quantitatively and qualitatively incorrect. Additionally, we demonstrate the current feasibility of the algorithm on near intermediate-scale quantum hardware by computing the dissociation curve of H 2 strongly coupled to a bosonic bath.

Warren, Samuel (ORCID:0000000157134454)↗
DOE OSTI2022

Photocrosslinking Probes Proximity of Thymine Modifiers Tethering Excitonically Coupled Dye Aggregates to DNA Holliday Junction

A DNA Holliday junction (HJ) has been used as a versatile scaffold to create a variety of covalently templated molecular dye aggregates exhibiting strong excitonic coupling. In these dye-DNA constructs, one way to attach dyes to DNA is to tether them via single long linkers to thymine modifiers incorporated in the core of the HJ. Here, using photoinduced [2 + 2] cycloaddition (photocrosslinking) between thymines, we investigated the relative positions of squaraine-labeled thymine modifiers in the core of the HJ, and whether the proximity of thymine modifiers correlated with the excitonic coupling strength in squaraine dimers. Photocrosslinking between squaraine-labeled thymine modifiers was carried out in two distinct types of configurations: adjacent dimer and transverse dimer. The outcomes of the reactions in terms of relative photocrosslinking yields were evaluated by denaturing polyacrylamide electrophoresis. We found that for photocrosslinking to occur at a high yield, a synergetic combination of three parameters was necessary: adjacent dimer configuration, strong attractive dye–dye interactions that led to excitonic coupling, and an A-T neighboring base pair. The insight into the proximity of dye-labeled thymines in adjacent and transverse configurations correlated with the strength of excitonic coupling in the corresponding dimers. To demonstrate a utility of photocrosslinking, we created a squaraine tetramer templated by a doubly crosslinked HJ with increased thermal stability. These findings provide guidance for the design of HJ-templated dye aggregates exhibiting strong excitonic coupling for exciton-based applications such as organic optoelectronics and quantum computing.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Unveiling the porosity effect of superbase ionic liquid-modified carbon sorbents in CO 2 capture from air

Direct air capture (DAC) of CO 2 represents one of the most promising technologies to achieve negative carbon emissions. In this work, the superbase ionic liquids (ILs)-modified carbon substrates were developed for DAC of CO 2 by harnessing the strong CO 2 binding capability of IL and the ordered porous channels of the carbon supports. Detailed porosity analysis revealed that the IL with an aromatic cation and an oxygenate anion preferred to fill the micropores, and a thin layer was created on the surface of the mesopores. Strong π-π interaction between the IL layer and the carbon surface was disclosed by wide-angle X-ray scattering (WAXS) analysis, leading to enhanced thermal stability of the IL phase. For the same lL coating amount, the DAC of CO 2 evaluation revealed that a larger mesopore size and pore volume in the carbon/IL composite materials led to higher CO 2 uptake capacity by exposing more active sites to integrate CO 2 from diluted sources. Further, the thermodynamic analysis confirmed the critical role of IL coating in providing strong chemisorption sites and significantly improved selectivity to enrich the diluted CO 2 from the air atmosphere. This work provides guidance on leveraging the scaffolds' surface properties and porosities of the scaffolds to optimize DAC of CO 2 behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Thickness-dependent spin bistable transitions in single-crystalline molecular 2D material

Abstract The advent of two-dimensional (2D) crystals has led to numerous scientific breakthroughs. Conventional 2D systems have in-plane covalent bonds and a weak out-of-plane van-der-Waals bond. Here we report a new type of 2D material composed of discrete magnetic molecules, where anisotropic van-der-Waals interactions bond the molecules into a 2D packing. Through mechanical exfoliation, we can obtain single-crystalline molecular monolayers, which can be readily integrated into other 2D systems. Optical spectroscopy suggests the few-layered molecules preserve the temperature-induced spin-crossover switching observed in the bulk form but show a drastic increase in thermal hysteresis unique to these thin 2D molecule assemblies. The trapping of spin bistability with decreasing layer number can arise from domain wall dynamics in reduced dimensions. Our results establish molecular solids with strong anisotropy of intermolecular interactions as precursors to a new class of 2D materials, affording possibilities to control molecular functionalities through substrate and interlayer interactions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Emergent interaction-induced topology in Bose-Hubbard ladders

We investigate the quantum many-body dynamics of bosonic atoms hopping in a two-leg ladder with strong on-site contact interactions. We observe that when the atoms are prepared in a staggered pattern with pairs of atoms on every other rung, singlon defects, i.e., rungs with only one atom, can localize due to an emergent topological model, even though the underlying model in the absence of interactions admits only topologically trivial states. This emergent topological localization results from the formation of a zero-energy edge mode in an effective lattice formed by two adjacent chains with alternating strong and weak hoping links (Su-Schrieffer-Heeger chains) and opposite staggering which interface at the defect position. Our findings open the opportunity to dynamically generate nontrivial topological behaviors without the need for complex Hamiltonian engineering. Published by the American Physical Society 2025

Wellnitz, David (ORCID:0000000349788938)↗
DOE OSTI2021

Heterobilayer moiré magnets: Moiré skyrmions and commensurate-incommensurate transitions

In this work, we study untwisted heterobilayers of ferromagnetic and antiferromagnetic van der Waals materials, with in particular a Dzyaloshinskii-Moriya interaction in the ferromagnetic layer. A continuum low-energy field theory is utilized to study such systems. We develop a phase diagram as a function of the strength of interlayer exchange and Dzyaloshinskii-Moriya interactions, combining perturbative and strong coupling analyses with numerical simulations using Landau-Lifshitz-Gilbert equations. Various moiré-periodic commensurate phases are found, and the commensurate-incommensurate transition is discussed. Among the commensurate phases, we observe an interesting skyrmion lattice phase wherein each moiré unit-cell hosts one skyrmion.

2-dimensional systems↗
DOE OSTI2024

Direct conversion of methane to aromatics and hydrogen via a heterogeneous trimetallic synergistic catalyst

Abstract Non-oxidative methane dehydro-aromatization reaction can co-produce hydrogen and benzene effectively on a molybdenum-zeolite based thermochemical catalyst, which is a very promising approach for natural-gas upgrading. However, the low methane conversion and aromatics selectivity and weak durability restrain the realistic application for industry. Here, a mechanism for enhancing catalysis activity on methane activation and carbon-carbon bond coupling has been found to promote conversion and selectivity simultaneously by adding platinum–bismuth alloy cluster to form a trimetallic catalyst on zeolite (Pt-Bi/Mo/ZSM-5). This bimetallic alloy cluster has synergistic interaction with molybdenum: the formed CH 3 * from Mo 2 C on the external surface of zeolite can efficiently move on for C-C coupling on the surface of Pt-Bi particle to produce C 2 compounds, which are the key intermediates of oligomerization. This pathway is parallel with the catalysis on Mo inside the cage. This catalyst demonstrated 18.7% methane conversion and 69.4% benzene selectivity at 710 °C. With 95% methane/5% nitrogen feedstock, it exhibited robust stability with slow deactivation rate of 9.3% after 2 h and instant recovery of 98.6% activity after regeneration in hydrogen. The enhanced catalytic activity is strongly associated with synergistic interaction with Mo and ligand effects of alloys by extensive mechanism studies and DFT calculation.

03 NATURAL GAS↗