Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spatial Temporal Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Sampling Biases in MODIS and SeaWiFS Ocean Chlorophyll Data

Although modem ocean color sensors, such as MODIS and SeaWiFS are often considered global missions, in reality it takes many days, even months, to sample the ocean surface enough to provide complete global coverage. The irregular temporal sampling of ocean color sensors can produce biases in monthly and annual mean chlorophyll estimates. We quantified the biases due to sampling using data assimilation to create a "truth field", which we then sub-sampled using the observational patterns of MODIS and SeaWiFS. Monthly and annual mean chlorophyll estimates from these sub-sampled, incomplete daily fields were constructed and compared to monthly and annual means from the complete daily fields of the assimilation model, at a spatial resolution of 1.25deg longitude by 0.67deg latitude. The results showed that global annual mean biases were positive, reaching nearly 8% (MODIS) and >5% (SeaWiFS). For perspective the maximum interannual variability in the SeaWiFS chlorophyll record was about 3%. Annual mean sampling biases were low (<3%) in the midlatitudes (between -40deg and 40deg). Low interannual variability in the global annual mean sampling biases suggested that global scale trend analyses were valid. High latitude biases were much higher than the global annual means, up to 20% as a basin annual mean, and over 80% in some months. This was the result of the high solar zenith angle exclusion in the processing algorithms. Only data where the solar angle is <75deg are permitted, in contrast to the assimilation which samples regularly over the entire area and month. High solar zenith angles do not facilitate phytoplankton photosynthesis and consequently low chlorophyll concentrations occurring here are missed by the data sets. Ocean color sensors selectively sample in locations and times of favorable phytoplankton growth, producing overestimates of chlorophyll. The biases derived from lack of sampling in the high latitudes varied monthly, leading to artifacts in the apparent seasonal cycle from ocean color sensors. A false secondary peak in chlorophyll occurred in May-August, which resulted from lack of sampling in the Antarctic.

Gregg, Watson W.↗

The Structure of Coronal Loops

It is widely believed that the simple coronal loops observed by XUV imagers, such as EIT, TRACE, or XRT, actually have a complex internal structure consisting of many (perhaps hundreds) of unresolved, interwoven "strands". According to the nanoflare model, photospheric motions tangle the strands, causing them to reconnect and release the energy required to produce the observed loop plasma. Although the strands, themselves, are unresolved by present-generation imagers, there is compelling evidence for their existence and for the nanoflare model from analysis of loop intensities and temporal evolution. A problem with this scenario is that, although reconnection can eliminate some of the strand tangles, it cannot destroy helicity, which should eventually build up to observable scales. we consider, therefore, the injection and evolution of helicity by the nanoflare process and its implications for the observed structure of loops and the large-scale corona. we argue that helicity does survive and build up to observable levels, but on spatial and temporal scales larger than those of coronal loops. we discuss the implications of these results for coronal loops and the corona, in general .

Antiochos, Spiro K.↗

Probing the Sun with Imaging Spectrographs

EUV and X-ray images of the Sun have revolutionized our understanding of our closest star. With them, we can probe the morphology and temperature structure of the solar atmosphere and see how they evolve as a function of space and time. However, image data cannot be used to determine line-of-sight velocities, abundances, or densities. This information is required to calculate the energy budget of eruptive events, provide boundary conditions for global solar models, and explore fundamental processes occurring in the solar atmosphere. For those diagnostics, we require spectroscopy. Because the structures on the Sun are extended sources, most modern-day spectrometers observe the Sun through long narrow slits. Two-dimensional, spectrally pure solar images with velocity, abundance, and density information are built up by stepping the slit over regions of interest. This method implies that two-dimensional information is highly limited by cadence and the temporal evolution and spatial structure of these parameters can never be truly separated. Both spatial and spectral information can be obtained in a single snapshot with slitless spectrometers, which were often used in the 1950-1970s, but were abandoned due to the difficulty of unfolding the overlapping spatial and spectral information. Thanks to advances in computer processing speeds and machine learning algorithms, there have been several techniques developed to complete the spatial/spectral unfolding, unlocking the full capability of slitless spectrometers for solar observations. The goal of this talk is to give an overview of the capability of such instruments, including recent results from a sounding rocket flight, and demonstrate their usefulness in the next decade of solar observatories and beyond.

Amy Winebarger↗

Probing the Sun with Imaging Spectrographs

EUV and X-ray images of the Sun have revolutionized our understanding of our closest star. With them, we can probe the morphology and temperature structure of the solar atmosphere and see how they evolve as a function of space and time. However, image data cannot be used to determine line-of-sight velocities, abundances, or densities. This information is required to calculate the energy budget of eruptive events, provide boundary conditions for global solar models, and explore fundamental processes occurring in the solar atmosphere. For those diagnostics, we require spectroscopy. Because the structures on the Sun are extended sources, most modern-day spectrometers observe the Sun through long narrow slits. Two-dimensional, spectrally pure solar images with velocity, abundance, and density information are built up by stepping the slit over regions of interest. This method implies that two-dimensional information is highly limited by cadence and the temporal evolution and spatial structure of these parameters can never be truly separated. Both spatial and spectral information can be obtained in a single snapshot with slitless spectrometers, which were often used in the 1950-1970s, but were abandoned due to the difficulty of unfolding the overlapping spatial and spectral information. Thanks to advances in computer processing speeds and machine learning algorithms, there have been several techniques developed to complete the spatial/spectral unfolding, unlocking the full capability of slitless spectrometers for solar observations. The goal of this talk is to give an overview of the capability of such instruments, including recent results from a sounding rocket flight, and demonstrate their usefulness in the next decade of solar observatories and beyond.

Amy Winebarger↗

Probing the Sun with Imaging Spectrographs

EUV and X-ray images of the Sun have revolutionized our understanding of our closest star. With them, we can probe the structure of the solar atmosphere and see how they evolve as a function of space and time. However, image data cannot be used to determine line-of-sight velocities, abundances, or densities. This information is required to calculate the energy budget of eruptive events, provide boundary conditions for global solar models, and explore fundamental processes occurring in the solar atmosphere. For those diagnostics, we require spectroscopy. Because the structures on the Sun are extended sources, most modern-day spectrometers observe the Sun through long narrow slits. Two-dimensional, spectrally pure solar images with velocity, abundance, and density information are built up by stepping the slit over regions of interest. This method implies that two-dimensional information is highly limited by cadence and the temporal evolution and spatial structure of these parameters can never be truly separated. Both spatial and spectral information can be obtained in a single snapshot with slitless spectrometers, which were often used in the 1950-1970s, but were abandoned due to the difficulty of unfolding the overlapping spatial and spectral information. Thanks to advances in computer processing speeds and machine learning algorithms, there have been several techniques developed to complete the spatial/spectral unfolding, unlocking the full capability of slitless spectrometers for solar observations. The goal of this talk is to give an overview of the capability of such instruments and demonstrate their usefulness in the next decade of solar observatories and beyond.

Amy Winebarger↗

Separating Spatial and Temporal Variations of the Aurora Using Two Nearly Colocated Satellites

This final report describes the efforts accomplished during the grant's period of performance, covering the period of 1 May 1997 to 30 April 2001, of a NASA Supporting Research and Technology Program grant under the Ionospheric, Thermospheric, and Mesospheric Physics component of the Sun-Earth Connections program. We have met and exceeded the goals set forth in the proposed research objectives. Referred publications have appeared in the scientific literature and several others are in the review process. In addition, numerous invited and contributed presentations of these studies were presented at national and international meetings during the performance period. One graduate student completed his PhD and won two AGU Best Student Paper awards based on research funded by this grant. These studies are summarized below. The science goal delineated in the initial proposal was "to systematically explore the temporal and spatial characteristics of the aurora in a way heretofore impossible, using data from two coplanar DMSP spacecraft." We accomplished this goal through a series of related studies. One study used these unique data to establish the role of Ps6 waves in coupling between the magnetosphere and the auroral ionosphere (omega bands) during the recovery phase of a magnetic storm; the published paper demonstrated the causal relationships between geospace processes occurring in different regions and established a simple conceptual model based on the fortuitous constellation of observations. In the second string of papers, we used these data to explore velocity-dispersed ions (VDIS) in and near the cusp, to test region identification models, and to look at space/time structure of auroral precipitation. On the first topic, the unique DMSP data revealed a remarkable double VDIS with a latitudinal overlap. This could only be explained in terms of a unified reconnection geometry that builds on several earlier unrelated models. The paper outlining this discovery has drawn considerable attention from the community and is currently in press - it adds significantly to the debate over whether reconnection is study state versus bursty and patchy versus global. The second paper develops the model further by incorporating the electron signature - these ionospheric particle precipitation signatures reveal the presence of magnetospheric "fossilized" FTEs, demonstrating the power of ionospheric measurements as a remote diagnostic of magnetospheric processes. Finally, the general nature of aurora] stability and coherence and region identification by particle characteristics were fully explored in a final paper. We identify candidate mechanisms controlling coherence time scales and length scales and refine boundary region identification criteria. We also use the dual-DMSP observations to identify the open and closed LLBL region and related its significance to the generalized bursty, multiple x-line model developed in the first paper. All of these topics are chapters of Dr. Boudouridis' recently completed PhD thesis.

Spence, Harlan E.↗

Monthly Variability in Upper Ocean Biogeochemistry Due to Mesoscale Eddy Activity in the Sargasso Sea

A comparison of monthly biogeochemical measurements made from 1993 to 1995, combined with hydrography and satellite altimetry, was used to observe the impacts of nine eddy events on primary productivity and particle flux in the Sargasso Sea. Measurements of primary production, thorium-234 flux, nitrate+nitrite, and photosynthetic pigments made at the US JGOFS Bermuda Atlantic Time-Series Study (BATS) site were used. During the three years of this study, four out of six high thorium-234 flux events over 1000 dpm/sq m/d occurred during the passage of an eddy. Primary production nearly as high as the spring bloom maximum was observed in two mode-water eddies (May 1993 and July 1995). The 1994 spring bloom at BATS was suppressed by the passage of an anticyclone. Distinct phytoplankton community shifts were observed in mode-water eddies, which had an increased percentage diatoms and dinoflagelletes, and in cyclones, which had an increased percentage cyanobacteria (excluding Prochlorococcus). The difference in the observations of mode-water eddies and cyclones may result from the age of the eddy, which was very important to the biological response. In general, eddies that were one to two months old elicited a large biological response; eddies that were three months old may show a biological response and were accompanied by high thorium flux measurements; eddies that were four months old or older did not show a biological response or high thorium flux. Our conceptual model depicting the importance of temporal changes during eddy upwelling and decay fit the observations well in all seven upwelling eddies. Additional information is needed to determine the importance of deeper mixed layers and winter mixing to the magnitude of the eddy impacts. Also, sampling generally captured only the beginning, end, and/or edge of an eddy due to the monthly to semi-monthly frequency of the measurements made at BATS. Lagrangian studies, higher resolution time-series, and/or more spatial coverage is needed to provide additional information for improved C and N budgets in the Sargasso Sea and to complete our understanding of the temporal changes that occur in an eddy.

Sweeney, Erin N.↗

A Lightweight I/O Scheme to Facilitate Spatial and Temporal Queries of Scientific Data Analytics

In the era of petascale computing, more scientific applications are being deployed on leadership scale computing platforms to enhance the scientific productivity. Many I/O techniques have been designed to address the growing I/O bottleneck on large-scale systems by handling massive scientific data in a holistic manner. While such techniques have been leveraged in a wide range of applications, they have not been shown as adequate for many mission critical applications, particularly in data post-processing stage. One of the examples is that some scientific applications generate datasets composed of a vast amount of small data elements that are organized along many spatial and temporal dimensions but require sophisticated data analytics on one or more dimensions. Including such dimensional knowledge into data organization can be beneficial to the efficiency of data post-processing, which is often missing from exiting I/O techniques. In this study, we propose a novel I/O scheme named STAR (Spatial and Temporal AggRegation) to enable high performance data queries for scientific analytics. STAR is able to dive into the massive data, identify the spatial and temporal relationships among data variables, and accordingly organize them into an optimized multi-dimensional data structure before storing to the storage. This technique not only facilitates the common access patterns of data analytics, but also further reduces the application turnaround time. In particular, STAR is able to enable efficient data queries along the time dimension, a practice common in scientific analytics but not yet supported by existing I/O techniques. In our case study with a critical climate modeling application GEOS-5, the experimental results on Jaguar supercomputer demonstrate an improvement up to 73 times for the read performance compared to the original I/O method.

Temporal Queries↗

Global-scale distribution of ozone in the remote troposphere from ATom and HIPPO airborne field missions

Ozone is a key constituent of the troposphere, where it drives photochemical processes, impacts air quality, and acts as a climate forcer. Large-scale in situ observations of ozone commensurate with the grid resolution of current Earth system models are necessary to validate model outputs and satellite retrievals. In this paper, we examine measurements from the Atmospheric Tomography (ATom; four deployments in 2016–2018) and the HIAPER Pole-to-Pole Observations (HIPPO; five deployments in 2009–2011) experiments, two global-scale airborne campaigns covering the Pacific and Atlantic basins. ATom and HIPPO represent the first global-scale, vertically resolved measurements of O3 distributions throughout the troposphere, with HIPPO sampling the atmosphere over the Pacific and ATom sampling both the Pacific and Atlantic. Given the relatively limited temporal resolution of these two campaigns, we first compare ATom and HIPPO ozone data to longer-term observational records to establish the representativeness of our dataset. We show that these two airborne campaigns captured on average 53 %, 54 %, and 38 % of the ozone variability in the marine boundary layer, free troposphere, and upper troposphere–lower stratosphere (UTLS), respectively, at nine well-established ozonesonde sites. Additionally, ATom captured the most frequent ozone concentrations measured by regular commercial aircraft flights in the northern Atlantic UTLS. We then use the repeated vertical profiles from these two campaigns to confirm and extend the existing knowledge of tropospheric ozone spatial and vertical distributions throughout the remote troposphere. We highlight a clear hemispheric gradient, with greater ozone in the Northern Hemisphere, consistent with greater precursor emissions and consistent with previous modeling and satellite studies. We also show that the ozone distribution below 8 km was similar in the extra-tropics of the Atlantic and Pacific basins, likely due to zonal circulation patterns. However, twice as much ozone was found in the tropical Atlantic as in the tropical Pacific, due to well-documented dynamical patterns transporting continental air masses over the Atlantic. Finally, we show that the seasonal variability of tropospheric ozone over the Pacific and the Atlantic basins is driven year-round by transported continental plumes and photochemistry, and the vertical distribution is driven by photochemistry and mixing with stratospheric air. This new dataset provides additional constraints for global climate and chemistry models to improve our understanding of both ozone production and loss processes in remote regions, as well as the influence of anthropogenic emissions on baseline ozone.

ATom, aircraft profiles, Atlantic pollution, ozone↗

Monthly Variability in Upper Ocean Biogeochemistry due to Mesoscale Eddy Activity in the Sargasso Sea

A comparison of monthly biogeochemical measurements made from 1993 to 1995, combined with hydrography and satellite altimetry, was used to observe the impacts of nine eddy events on primary productivity and particle flux in the Sargasso Sea. Measurements of primary production, thorium-234 flux, nitrate+nitrite, and photosynthetic pigments made at the US JGOFS Bermuda Atlantic Time-series Study (BATS) site were used. During the three years of this study, four out of six high thorium-234 flux events over 1000 dpm/sq m/d occurred during the passage of an eddy. Primary production nearly as high as the spring bloom maximum was observed in two modewater eddies (May 1993 and July 1995). The 1994 spring bloom at BATS was suppressed by the passage of an anticyclone. Distinct phytoplankton community shifts were observed in mode-water eddies, which had an increased percentage diatoms and dinoflagelletes, and in cyclones, which had an increased percentage cyanobacteria (excluding Prochlorococcus). The difference in the observations of mode-water eddies and cyclones may result from the age of the eddy, which was very important to the biological response. In general, eddies that were one to two months old elicited a large biological response; eddies that were three months old may show a biological response and were accompanied by high thorium flux measurements, eddies that were four months old or older did not show a biological response or high thorium flux. Our conceptual model depicting the importance of temporal changes during eddy upwelling and decay fit the observations well in all 7 upwelling eddies. Additional information is needed to determine the importance of deeper mixed layers and winter mixing to the magnitude of the eddy impacts. Also, sampling generally captured only the beginning, end, and /or edge of an eddy due to the monthly to semi-monthly frequency of the measurements made at BATS. Lagrangian studies, higher resolution time-series, and/or more spatial coverage is needed to provide additional information for improved C and N budgets in the Sargasso Sea and to complete our understanding of the temporal changes that occur in an eddy.

Sweeney, Erin N.↗

Progress in Laser Based Carbon Nanotube Production and In-Situ Diagnostics at NASA/JSC

This paper focuses on the improvement of carbon nanotube production with the upgraded laser system operating at 60 Hz. The yield has increased by about five times with the new system, while the quality of the single wall nanotube (SWNT) is unchanged. Recent diagnostic data of spatial and temporal evolution of C2 in the laser ablation plume are obtained by imaging the plume area on a gated change coupled device. A three-laser setup is used to monitor nickel atoms in different parts of the plume by laser induced fluorescence (LIF). Measurements are made at different times after the ablating lasers. These results, along with the previous measurements of emission and LIF of C2 will be discussed. Our ultimate goal is to use these measurements to model the nanotube growth mechanism.

Arepalli, Sivaram↗

Probing the Sun with Imaging Spectrographs

EUV and X-ray images of the Sun have revolutionized our understanding of our closest star. With them, we can probe the morphology and temperature structure of the solar atmosphere and see how they evolve as a function of space and time. However, image data cannot be used to determine line-of-sight velocities, abundances, or densities. This information is required to calculate the energy budget of eruptive events, provide boundary conditions for global solar models, and explore fundamental processes occurring in the solar atmosphere. For those diagnostics, we require spectroscopy. Because the structures on the Sun are extended sources, most modern-day spectrographs observe the Sun through long narrow slits. Two-dimensional, spectrally pure solar images with velocity, abundance, and density information are built up by stepping the slit over regions of interest. This mode of operation implies that two-dimensional information is highly limited by cadence and the temporal evolution and spatial structure of these parameters can never be truly separated. Both spatial and spectral information can be obtained in a single snapshot with slitless spectrographs, which were often used in the 1950-1970s, but were abandoned due to the difficulty of unfolding the overlapping spatial and spectral information. Thanks to advances in computer processing speeds and machine learning algorithms, there have been several techniques developed to complete the spatial/spectral unfolding, unlocking the full capability of slitless spectrographs for solar observations. The goal of this talk is to give a broad overview of the capability of such instruments and demonstrate their usefulness in the next decade of solar observatories and beyond.

Amy Winebarger↗

The Time Series Technique for Aerosol Retrievals over Land from MODIS: Algorithm MAIAC

Atmospheric aerosols interact with sun light by scattering and absorbing radiation. By changing irradiance of the Earth surface, modifying cloud fractional cover and microphysical properties and a number of other mechanisms, they affect the energy balance, hydrological cycle, and planetary climate [IPCC, 2007]. In many world regions there is a growing impact of aerosols on air quality and human health. The Earth Observing System [NASA, 1999] initiated high quality global Earth observations and operational aerosol retrievals over land. With the wide swath (2300 km) of MODIS instrument, the MODIS Dark Target algorithm [Kaufman et al., 1997; Remer et al., 2005; Levy et al., 2007] currently complemented with the Deep Blue method [Hsu et al., 2004] provides daily global view of planetary atmospheric aerosol. The MISR algorithm [Martonchik et al., 1998; Diner et al., 2005] makes high quality aerosol retrievals in 300 km swaths covering the globe in 8 days. With MODIS aerosol program being very successful, there are still several unresolved issues in the retrieval algorithms. The current processing is pixel-based and relies on a single-orbit data. Such an approach produces a single measurement for every pixel characterized by two main unknowns, aerosol optical thickness (AOT) and surface reflectance (SR). This lack of information constitutes a fundamental problem of the remote sensing which cannot be resolved without a priori information. For example, MODIS Dark Target algorithm makes spectral assumptions about surface reflectance, whereas the Deep Blue method uses ancillary global database of surface reflectance composed from minimal monthly measurements with Rayleigh correction. Both algorithms use Lambertian surface model. The surface-related assumptions in the aerosol retrievals may affect subsequent atmospheric correction in unintended way. For example, the Dark Target algorithm uses an empirical relationship to predict SR in the Blue (B3) and Red (B1) bands from the 2.1 m channel (B7) for the purpose of aerosol retrieval. Obviously, the subsequent atmospheric correction will produce the same SR in the red and blue bands as predicted, i.e. an empirical function of 2.1. In other words, the spectral, spatial and temporal variability of surface reflectance in the Blue and Red bands appears borrowed from band B7. This may have certain implications for the vegetation and global carbon analysis because the chlorophyll-sensing bands B1, B3 are effectively substituted in terms of variability by band B7, which is sensitive to the plant liquid water. This chapter describes a new recently developed generic aerosol-surface retrieval algorithm for MODIS. The Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm simultaneously retrieves AOT and surface bi-directional reflection factor (BRF) using the time series of MODIS measurements.

Lyapustin, Alexei↗

Prominences: The Key to Understanding Solar Activity

Prominences are spectacular manifestations of both quiescent and eruptive solar activity. The largest examples can be seen with the naked eye during eclipses, making prominences among the first solar features to be described and catalogued. Steady improvements in temporal and spatial resolution from both ground- and space-based instruments have led us to recognize how complex and dynamic these majestic structures really are. Their distinguishing characteristics - cool knots and threads suspended in the hot corona, alignment along inversion lines in the photospheric magnetic field within highly sheared filament channels, and a tendency to disappear through eruption - offer vital clues as to their origin and dynamic evolution. Interpreting these clues has proven to be contentious, however, leading to fundamentally different models that address the basic questions: What is the magnetic structure supporting prominences, and how does so much cool, dense plasma appear in the corona? Despite centuries of increasingly detailed observations, the magnetic and plasma structures in prominences are poorly known. Routine measurements of the vector magnetic field in and around prominences have become possible only recently, while long-term monitoring of the underlying filament-channel formation process also remains scarce. The process responsible for prominence mass is equally difficult to establish, although we have long known that the chromosphere is the only plausible source. As I will discuss, however, the motions and locations of prominence material can be used to trace the coronal field, thus defining the magnetic origins of solar eruptions. A combination of observations, theory, and numerical modeling must be used to determine whether any of the competing theories accurately represents the physics of prominences. I will discuss the criteria for a successful prominence model, compare the leading models, and present in detail one promising, comprehensive scenario for prominence formation and evolution that could answer the two questions posed above.

Karpen, Judy T.↗

Cloud-to-Ground Lightning Estimates Derived from SSMI Microwave Remote Sensing and NLDN

Lightning observations are collected using ground-based and satellite-based sensors. The National Lightning Detection Network (NLDN) in the United States uses multiple ground sensors to triangulate the electromagnetic signals created when lightning strikes the Earth's surface. Satellite-based lightning observations have been made from 1998 to present using the Lightning Imaging Sensor (LIS) on the NASA Tropical Rainfall Measuring Mission (TRMM) satellite, and from 1995 to 2000 using the Optical Transient Detector (OTD) on the Microlab-1 satellite. Both LIS and OTD are staring imagers that detect lightning as momentary changes in an optical scene. Passive microwave remote sensing (85 and 37 GHz brightness temperatures) from the TRMM Microwave Imager (TMI) has also been used to quantify characteristics of thunderstorms related to lightning. Each lightning detection system has fundamental limitations. TRMM satellite coverage is limited to the tropics and subtropics between 38 deg N and 38 deg S, so lightning at the higher latitudes of the northern and southern hemispheres is not observed. The detection efficiency of NLDN sensors exceeds 95%, but the sensors are only located in the USA. Even if data from other ground-based lightning sensors (World Wide Lightning Location Network, the European Cooperation for Lightning Detection, and Canadian Lightning Detection Network) were combined with TRMM and NLDN, there would be enormous spatial gaps in present-day coverage of lightning. In addition, a globally-complete time history of observed lightning activity is currently not available either, with network coverage and detection efficiencies varying through the years. Previous research using the TRMM LIS and Microwave Imager (TMI) showed that there is a statistically significant correlation between lightning flash rates and passive microwave brightness temperatures. The physical basis for this correlation emerges because lightning in a thunderstorm occurs where ice is first present in the cloud and electric charge separation occurs. These ice particles efficiently scatter the microwave radiation at the 85 and 37 GHz frequencies, thus leading to large brightness temperature depressions. Lightning flash rate is related to the total amount of ice passing through the convective updraft regions of thunderstorms. Confirmation of this relationship using TRMM LIS and TMI data, however, remains constrained to TRMM observational limits of the tropics and subtropics. Satellites from the Defense Meteorology Satellite Program (DMSP) have global coverage and are equipped with passive microwave imagers that, like TMI, observe brightness temperatures at 85 and 37 GHz. Unlike the TRMM satellite, however, DMSP satellites do not have a lightning sensor, and the DMSP microwave data has never been used to derive global lightning. In this presentation, a relationship between DMSP Special Sensor Microwave Imager (SSMI) data and ground-based cloud-to-ground (CG) lightning data from NLDN is investigated to derive a spatially complete time history of CG lightning for the USA study area. This relationship is analogous to the established using TRMM LIS and TMI data. NLDN has the most spatially and temporally complete CG lightning data for the USA, and therefore provides the best opportunity to find geospatially coincident observations with SSMI sensors. The strongest thunderstorms generally have minimum 85 GHz Polarized Corrected brightness Temperatures (PCT) less than 150 K. Archived radar data was used to resolve the spatial extent of the individual storms. NLDN data for that storm spatial extent defined by radar data was used to calculate the CG flash rate for the storm. Similar to results using TRMM sensors, a linear model best explained the relationship between storm-specific CG flash rates and minimum 85 GHz PCT. However, the results in this study apply only to CG lightning. To extend the results to weaker storms, the probability of CG lightning (instead of the flash rate) was calculated for storms having 85 GHz PCT greater than 150 K. NLDN data was used to determine if a CG strike occurred for a storm. This probability of CG lightning was plotted as a function of minimum 85 GHz PCT and minimum 37 GHz PCT. These probabilities were used in conjunction with the linear model to estimate the CG flash rate for weaker storms with minimum 85 GHz PCTs greater than 150 K. Results from the investigation of CG lightning and passive microwave radiation signals agree with the previous research investigating total lightning and brightness temperature. Future work will take the established relationships and apply them to the decades of available DMSP data for the USA to derive a map of CG lightning flash rates. Validation of this method and uncertainty analysis will be done by comparing the derived maps of CG lightning flash rates against existing NLDN maps of CG lightning flash rates.

Winesett, Thomas↗

PBL Height from AIRS, GPS RO, and MERRA-2 Products in NASA GES DISC and Their 10 Year Seasonal Mean Intercomparison

Within the planetary boundary layer (PBL), surface forcing response, drag, turbulence, and vertical mixing are important processes and play a more critical role here than in the overlying “free atmosphere”. The PBL Height (PBLH) is an important parameter in climate models, weather forecasts, and air quality prediction. The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) provides data processing, archiving, and distribution services for numerous Earth science products. PBLH is a parameter in three products served by GES DISC, which are from the Atmospheric Infrared Sounder (AIRS), the Global Positioning System (GPS) radio occultation (RO) experiment, and the NASA reanalysis product Modern-Era Retrospective analysis for Research and Applications – 2 (MERRA-2). These products have different spatial and temporal resolutions and coverages, and their PBLH definitions are also different. To better serve the PBL research community, we have summarized the specifications of these products. A ten-year seasonal mean intercomparison is also conducted to provide further guidance to users. The intercomparison results show that MERRA-2 has a much shallower PBL than AIRS and GPS RO. An experimental study indicates the different PBLH definition in MERRA-2 caused smaller values of PBLH. The improvement of the water vapor retrieval in AIRS version 7 over version 6 results in the version 7 PBLH agreeing better with GPS RO and MERRA-2 than version 6, especially near the equator and low latitudes.

Feng Ding↗

Energy spectra of plasma sheet ions and electrons from about 50 eV/e to about 1 MeV during plamsa temperature transitions

ISEE-1 charged-particle measurements obtained during eight plasma temperature transitions (PTTs) in 1978-1979 are compiled in tables and graphs and analyzed in detail, comparing the ion and electron differential energy spectra with the predictions of theoretical models. PTTs are defined as approximately 1-h periods of low bulk plasma velocity and steadily increasing or decreasing thermal energy. A Maxwellian distribution is found to be inadequate in describing the PTT energy spectra, but velocity-exponential and kappa distributions are both successful, the latter especially at higher energies. The power-law index kappa varies from PTT to PTT, but the high-energy spectral index and overall shape of the distribution remain constant during a PTT; both spatial and temporal effects are observed.

Christon, S. P.↗

Estimating the Concentration of Large Raindrops from Polarimetric Radar and Disdrometer Observations

Estimation of rainfall integral parameters, including radar observables, and empirical relations between them are sensitive to the truncation of the drop size distribution (DSD), particularly at the large drop end. The sensitivity of rainfall integral parameters to the maximum drop diameter (D(sub max)) is exacerbated at C‐band since resonance effects are pronounced for large drops in excess of 5 mm diameter (D). Due to sampling limitations, it is often difficult to reliably estimate D(sub max) with disdrometers. The resulting uncertainties in D(sub max0 potentially increase errors in radar retrieval methods, particularly at C‐band, that rely on disdrometer observations for DSD input to radar models. In fact, D(sub max) is typically an assumed DSD parameter in the development of radar retrieval methods. Because of these very uncertainties, it is difficult to independently confirm disdrometer estimates of D(sub max) with polarimetric radar observations. A couple of approaches can be taken to reduce uncertainty in large drop measurement. Longer integration times can be used for the collection of larger disdrometer samples. However, integration periods must be consistent with a radar resolution volume (RRV) and the temporal and spatial scales of the physical processes affecting the DSD therein. Multiple co‐located disdrometers can be combined into a network to increase the sample size within a RRV. However, over a reasonable integration period, a single disdrometer sample volume is many orders of magnitudes less than a RRV so it is not practical to devise a network of disdrometers that has an equivalent volume to a typical RRV. Since knowledge of DSD heterogeneity and large drop occurrence in time and space is lacking, the specific accuracy or even general representativeness of disdrometer based D(sub max) and large drop concentration estimates within a RRV are currently unknown. To address this complex issue, we begin with a simpler question. Is the frequency of occurrence of large rain drops (D > 5 mm) in disdrometer observations, either stand alone or networked, generally representative and consistent with polarimetric radar observations? We first show from simulations that the concentration of large (D > 5 mm) rain drops (N(sub T5)) can be estimated from polarimetric observations of specific differential phase (K(sub dp)) and differential reflectivity (Z(sub dr)), N(sub T5)=F(K(sub dp),Z(sub dr)), or horizontal reflectivity (Z(sub h)) and Z(sub dr), N(sub T5)=(Z(sub h),Z(sub dr)). We assess the error associated with polarimetric retrieval of N(sub T5), including sensitivity to D(sub max) parameterization assumptions and measurement error in the radar simulations. Polarimetric measurements at S‐band and C‐band will then be used to retrieve estimates of N(sub T5) and compared to disdrometer estimates of N(sub T5). After careful consideration of retrieval error, we will check consistency between disdrometer and polarimetric radar estimates of N(sub T5) and the frequency of occurrence of large rain drops in a variety of precipitating regimes using data from NASA's Global Precipitation Measurement (GPM) Ground Validation (GV) program, including field campaigns such as MC3E (Oklahoma) and IFloodS (Iowa) and extended measurements over Huntsville, Alabama and NASA Wallops Flight Facility in coastal Virginia.

Carey, Lawrence D.↗