Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STARTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Microstructures and phase transformations of Ti-30Zr-xNb (x = 5, 7, 9, 13 at.%) shape memory alloys

The microstructures, phase transformations and shape memory properties of Ti-30Zr-xNb (x = 5, 7, 9, 13 at.%) alloys were investigated. The X-ray diffraction and transmission electron microscopy observations showed that the Ti-30Zr-5Nb, Ti-30Zr-7/9Nb and Ti-30Zr-13Nb alloys were composed of the hcp α′-martensite, orthorhombic α″-martensite and β phases, respectively. The results indicated the enhanced β-stabilizing effect of Nb in Ti-30Zr-xNb alloys than that in Ti-Nb alloys due to the high content of Zr. The differential scanning calorimetry test indicated that the Ti-30Zr-5Nb alloy displayed a reversible transformation with a high martensitic transformation start temperature of 776 K and a reverse martensitic transformation start temperature (A{sub s}) of 790 K. For the Ti-30Zr-7Nb and Ti-30Zr-9Nb alloys, the martensitic transformation temperatures decreased with the increasing Nb content. Moreover, an ω phase transformation occurred in the both alloys upon heating at a temperature lower than the corresponding A{sub s}, which is prompted by more addition of Nb. Although the critical stress in tension of the three martensitic alloys decreased with increasing Nb content, the Ti-30Zr-9Nb alloy showed a critical stress of as high as 300 MPa. Among all the alloys, the Ti-30Zr-9Nb alloy exhibited the maximum shape memory effect of 1.61%, due to the lowest critical stress for the martensite reorientation. - Highlights: •Ti-30Zr-5Nb alloy is composed of hcp α′-martensite with the M{sub s} of 776 K. •Ti-30Zr-7Nb and Ti-30Zr-9Nb alloys are predominated by orthorhombic α″-martensite. •Ti-30Zr-13Nb alloy consists of a single β phase due to the β-stabilizing effect of Nb. •The martensitic transformation temperatures decrease with increasing Nb content. •Ti-30Zr-9Nb alloy shows the maximum shape memory effect of 1.61%.

36 MATERIALS SCIENCE↗

Chitosan as template for the synthesis of ceria nanoparticles

Graphical abstract: Cerium oxide nanoparticles with cubic fluorite structure were prepared using chitosan as template, cerium nitrate as a starting material and sodium hydroxide as a precipitating agent. Calcinated powders at 350 {sup o}C contain agglomerated particles with average particle size of {approx}4 nm, very high porosity and foam-like morphology formed by open and close pores. Highlights: {yields} Pure CeO{sub 2} nanoparticles can take place using chitosan as template. {yields} A porous material was obtained. {yields} Blueshifts in the ultraviolet absorption spectra have been observed in cerium oxide nanocrystallites. -- Abstract: Cerium oxide (CeO{sub 2}), nanoparticles were prepared using chitosan as template, cerium nitrate as a starting material and sodium hydroxide as a precipitating agent. The resultant ceria-chitosan spheres were calcined at 350 {sup o}C. The synthesized powders were characterized by, XRD, HRTEM, UV-vis, FTIR, and TG-DTA. The average size of the nanoparticles obtained was {approx}4 nm and BET specific surface area {approx}105 m{sup 2} g{sup -1}. Blueshifts in the ultraviolet absorption spectra have been observed in cerium oxide nanocrystallites. The band-gap was found to be 4.5 eV. The blueshifts are well explained for diameters down to less than a few nanometers by the change in the electronic band structure.

60 APPLIED LIFE SCIENCES↗

Preparation of graphene/TiO{sub 2} anode materials for lithium-ion batteries by a novel precipitation method

Graphical abstract: Large-scale preparation of graphene/TiO{sub 2} composites was carried out by precipitation method using graphene oxide nanosheet, Ti(SO{sub 4}){sub 2} and NH{sub 3}H{sub 2}O as starting materials. Highlights: Black-Right-Pointing-Pointer We use cheap graphene oxides, Ti(SO{sub 4}){sub 2} and NH{sub 3}H{sub 2}O as starting materials for preparation of graphene/TiO{sub 2} composites. Black-Right-Pointing-Pointer The reversible capacity and the cycling stability of the TiO{sub 2} are improved by graphene additive. Black-Right-Pointing-Pointer Shorter diffusion length and a larger contact area of graphene/TiO{sub 2} result in excellent electrochemical performance. -- Abstract: This paper reports a large-scale production route for graphene/TiO{sub 2} nanocomposites using water-based in situ precipitation method. In this method, freshly prepared graphene oxides/TiO{sub 2} obtained by precipitating Ti(SO{sub 4}){sub 2} with NH{sub 3}H{sub 2}O was subjected to heat treatment in the presence of N{sub 2}, which resulted in the formation of graphene/TiO{sub 2} nanocomposites. Graphene/TiO{sub 2} composites prepared by our method were found to be suitable as anode materials for lithium ion batteries because of its stable cycling performance and high capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ formation of sintered cordierite–mullite nano–micro composites by utilizing of waste silica fume

Highlights: ► We succeeded to obtain in situ formed sintered cordierite–mullite nano–macro composites from waste and pure materials at 1400 °C. ► Their sinterability was greatly dependent on both firing temperature and composition. ► XRD patterns showed that the optimum temperature required for formation of sintered cordierite–mullite nano–macro composites was achieved at 1400 °C. ► The batch containing 70 wt.% cordierite and 30 wt.% mullite exhibited the best properties. ► Microstructures of the densified composites were composed of nano–macro cordierite–mullite structures. -- Abstract: This study aims at in situ formation of sintered cordierite–mullite nano–macro composites having high technological properties using waste silica fume, calcined ball clay, calcined alumina, and magnesia as starting materials. The starting materials were mixed in different ratios to obtain different cordierite–mullite composite batches in which the cordierite contents ranged from 50 to 100 wt.%. The batches were uni-axially pressed at 100 MPa and sintered at 1350, 1400 and 1450 °C to select the optimum temperature required for cordierite–mullite nano–macro composites formation. The formed phases were identified by X-ray diffraction (XRD) pattern. The sintering parameters in terms of bulk density (BD) and apparent porosity (AP) were determined. The microstructure of composites has been investigated by scanning electron microscope (SEM). Cold crushing strength (CCS) of the sintered batches was evaluated. The result revealed that the cordierite–mullite nano–macro composites were in-situ formed at 1400 °C. The batch containing 70 wt.% cordierite showed good physical and mechanical properties.

36 MATERIALS SCIENCE↗

Crystallization control of SrCO{sub 3} nanostructure in imidazolium-based temperature ionic liquids

Highlights: ► Nanowhisker, nanospindle, nanosphere, sphere, spindle, rodlike SrCO{sub 3} were obtained. ► Nanowhisker, nanospindle SrCO{sub 3} were auto-assembled in [C{sub 8}mim]BF{sub 4} and [HOEtMIm]NT{sub f2}. ► Small size and rough surface particle show low starting decomposition temperature. ► This method is simple, easy to control in large-scale producing SrCO{sub 3} nanostructure. -- Abstract: Strontium carbonate nanostructures, with unique nanowhisker, nanospindle, nanosphere, sphere, spindle, and rodlike hierarchical structure, were synthesized in imidazolium-based room temperature ionic liquids [C{sub 4}mim]PF{sub 6}, [C{sub 4}mim]Cl, [C{sub 8}mim]Br, [C{sub 8}mim]BF{sub 4}, and [HOEtMIm]NT{sub f2}. The nanostructures were characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis. The results show that the morphologies of SrCO{sub 3} were strongly dependent on the nature of the corresponding RILs, its content, and the reaction temperature. RILs can act as structure-directing agent, leading the auto-assembly of SrCO{sub 3} crystal. [C{sub 8}mim]BF{sub 4} and [HOEtMIm]NT{sub f2} favored the production of nanowhisker and nanospindle SrCO{sub 3}, respectively, whereas [C{sub 4}mim]PF{sub 6} favored the production of nanosphere. Small particles were obtained at high reaction temperature. Low starting decomposition temperature was observed. Finally, the formation mechanism of the SrCO{sub 3} crystal was preliminary presented.

36 MATERIALS SCIENCE↗

Controllable synthesis and characterization of cadmium molybdate octahedral nanocrystals by coprecipitation method

Graphical abstract: CdMoO{sub 4} nanocrystals have been synthesized via coprecipitation method by using Cd(Sal){sub 2} and (NH{sub 4}){sub 6}Mo{sub 7}O{sub 24}·4H{sub 2}O as starting materials in water. Effects of temperature, reaction time, solvent, surfactant, cadmium and molybdate sources were investigated to reach optimum condition. It was found that particle size, morphology and phase of the final products could be greatly influenced via these parameters. - Highlights: • A facile coprecipitation method was successfully employed to prepare CdMoO{sub 4}. • The effects of some parameters were investigated. • PEG600, PVP, SDS and CTAB were used as surfactant. • Optimum condition for preparation CdMoO{sub 4} nanocrystals was investigated. - Abstract: Cadmium molybdate (CdMoO{sub 4}) nanocrystals have been successfully synthesized via coprecipitation method by using Cd(Sal){sub 2} (Sal = salicylidene) and (NH{sub 4}){sub 6}Mo{sub 7}O{sub 24}·4H{sub 2}O as starting materials in water as solvent. Effects of temperature, reaction time, solvent, surfactant and cadmium source were investigated to reach optimum condition. It was found that particle size, morphology and phase of the final products could be greatly influenced via these parameters. The products were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectra, photoluminescence (PL) spectroscopy, energy dispersive X-ray microanalysis (EDX), scanning electron microscopy (SEM) and transmission electron microscopy (TEM)

36 MATERIALS SCIENCE↗

Structure-dielectric properties relationships in copper-substituted magnesium ferrites

Graphical abstract: - Highlights: • Synthesis of copper substituted magnesium ferrites materials is reported. • A shift from cubic to tetragonal structure starting with x = 0.84 was observed. • The dielectric properties are influenced by Cu-substitution. - Abstract: Nanocrystalline powders of copper-substituted magnesium ferrites with general formula Mg{sub 1−x}Cu{sub x}Fe{sub 2}O{sub 4} (x = 0.00, 0.17, 0.34, 0.50, 0.67, 0.84, 1.00) were prepared for the first time by sol–gel auto-combustion method, using glycine as fuel agent. Solid phase chemical reactions and the occurrence of spinel structure were monitored by using infrared spectroscopy. X-ray diffraction analysis confirmed the spinel single-phase formation. A shift from cubic structure to tetragonal structure starting with x = 0.84 was also observed. Microstructure of the samples was analyzed by scanning electron microscopy and particle size was estimated from the micrographs. Analysis of dielectric properties revealed very low values of dielectric loss at frequencies over 10 MHz.

36 MATERIALS SCIENCE↗

Indium (In)- and tin (Sn)-based metal induced crystallization (MIC) on amorphous germanium (α-Ge)

Highlights: • In- and Sn-based MIC phenomenon on amorphous (α)-Ge is newly reported. • The In- and Sn-MIC phenomenon respectively started at 250 °C and 400 °C. • The Sn-MIC process presents higher sheet resistance and bigger crystal grains. - Abstract: In this paper, metal-induced crystallization (MIC) phenomenon on α-Ge by indium (In) and tin (Sn) are thoroughly investigated. In- and Sn-MIC process respectively started at 250 °C and 400 °C. Compared to the previously reported MIC samples including In-MIC, Sn-MIC process presented higher sheet resistance (similar to that of SPC) and bigger crystal grains above 50 nm (slightly smaller than that of SPC). According to SIMS analysis, Sn atoms diffused more slowly into Ge than In at 400 °C, providing lower density of heterogeneous nuclei induced by metals and consequently larger crystal grains.

36 MATERIALS SCIENCE↗

Matrix structure evolution and thermo-mechanical properties of carbon fiber-reinforced Al{sub 2}O{sub 3}-SiC-C castable composites

Highlights: • Carbon fibers are formed in Al{sub 2}O{sub 3}-SiC-C castable composites under the action of nano Ni. • Starting growth temperature is 900 °C and growth mechanism agrees with V–S model. • The high temperature strength of composites can be increased by above 40%. • The thermal shock resistance can be enhanced by above 20%. - Abstract: The spalling and corrosion during the thermal cycles are the main causes of the damages observed in Al{sub 2}O{sub 3}-SiC-C castable composites that are used in molten-iron system. Using the catalyst of nano Ni and ball pitch in the matrix, Al{sub 2}O{sub 3}-SiC-C castable composites were prepared with the anti-oxidant addition of silicon. The results indicate that the high temperature of the Al{sub 2}O{sub 3}-SiC-C castable composites can be increased by above 42%, and the thermal shock resistance can be enhanced by above 20% because the ball pitch is carbonized and releases C{sub x}H{sub y} vapor, which can be pyrolized to carbon atoms and subsequently deposited into carbon fibers under the catalyst action. The starting temperature of carbon fiber growth is approximately 900 °C, and their diameter and aspect ratio can increase with the rising temperature. The in-situ generation of carbon fibers in Al{sub 2}O{sub 3}-SiC-C castable composites can significantly improve the fibers’ thermo-mechanical properties.

36 MATERIALS SCIENCE↗

Functionalized silica aerogels for gas-phase purification, sensing, and catalysis: A review

Silica aerogels have a rich history and a unique, fascinating gas-phase chemistry that has lent them to many diverse applications. This review starts with a brief discussion of the fundamental issues driving the movement of gases in silica aerogels and then proceeds to provide an overview of the work that has been done with respect to the purification of gases, sensing of individual gases, and uses of silica aerogels as catalysts for gas-phase reactions. Salient features of the research behind these different applications are presented, and, where appropriate, critical aspects that affect the practical use of the aerogels are noted. Specific sections under the gas-purification category focus on the removal of airborne nanoparticles, carbon dioxide, volatile organic compounds, sulfur gases and radioactive iodine from gas streams. The use of silica aerogels as sensors for humidity, oxygen, hydrocarbons, volatile acids and bases, various non-ammoniacal nitrogen gases, and viral particles is discussed. With respect to catalysis, the demonstrated use of silica aerogels as supports for oxidation, Fischer-Tropsch, alkane isomerization, and hydrogenation reactions is reviewed, along with a section on untested catalytic formulations involving silica aerogels. A short section focuses on recent developments in thermomolecular Knudsen compressor pumps using silica aerogel membranes. The review continues with an overview of the production methods, locations of manufacturing facilities globally, and a brief discussion of the economics before concluding with a few remarks about the present and future trends revealed by the work presented.

gas catalysis↗

Digital pulse processing for NaI(Tl) detectors

We apply two different post-processing techniques to digital pulses induced by photons in a NaI(Tl) detector and compare the obtained energy resolution to the standard analog approach. Our digital acquisition approach is performed using a single-stage acquisition with a fast digitizer. Both the post-processing techniques we propose rely on signal integration. In the first, the pulse integral is calculated by directly numerically integrating the pulse digital samples, while in the second the pulse integral is estimated by a model-based fitting of the pulse. Our study used a 7.62 cm×7.62 cm cylindrical NaI(Tl) detector that gave a 7.60% energy resolution (at 662 keV), using the standard analog acquisition approach, based on a pulse shaping amplifier. The new direct numerical integration yielded a 6.52% energy resolution. The fitting approach yielded a 6.55% energy resolution, and, although computationally heavier than numerical integration, is preferable when only the early samples of the pulse are available. We also evaluated the timing performance of a fast–slow detection system, encompassing an EJ-309 and a NaI(Tl) scintillator. Here, we use two techniques to determine the pulse start time: constant fraction discrimination (CFD) and adaptive noise threshold timing (ANT), for both the analog and digital acquisition approach. With the analog acquisition approach, we found a system time resolution of 5.8 ns and 7.3 ns, using the constant fraction discrimination and adaptive noise threshold timing, respectively. With the digital acquisition approach, a time resolution of 1.2 ns was achieved using the ANT method and 3.3 ns using CFD at 50% of the maximum, to select the pulse start time. Finally, the proposed direct digital readout and post-processing techniques can improve the application of NaI(Tl) detectors, traditionally considered ‘slow’, for fast counting and correlation measurements, while maintaining a good measurement of the energy resolution.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Evaluation of HPK n + - p planar pixel sensors for the CMS Phase-2 upgrade

To cope with the challenging environment of the planned high luminosity upgrade of the Large Hadron Collider (HL-LHC), scheduled to start operation in 2029, CMS will replace its entire tracking system. The requirements for the tracker are largely determined by the long operation time of 10 years with an instantaneous peak luminosity of up to 7.5 × 10 34 cm –2 s –1 in the ultimate performance scenario. Depending on the radial distance from the interaction point, the silicon sensors will receive a particle fluence corresponding to a non-ionizing energy loss of up to $\Phi_{\text {eq}}$ = 3.5 × 10 16 cm –2 . Here this paper focuses on planar pixel sensor design and qualification up to a fluence of $\Phi_{\text {eq}}$ = 1.4 × 10 16 cm –2 . For the development of appropriate planar pixel sensors an R&D program was initiated, which includes $n^+ -p$ sensors on 150 mm (6”) wafers with an active thickness of 150 μm with pixel sizes of 100 × 25 μm 2 and 50 × 50 μm 2 manufactured by Hamamatsu. Single chip modules with ROC4Sens and RD53A readout chips were made. Irradiation with protons and neutrons, as well was an extensive test beam campaign at DESY were carried out. This paper presents the investigation of various assemblies mainly with ROC4Sens readout chips. It demonstrates that multiple designs fulfill the requirements in terms of breakdown voltage, leakage current and efficiency. The single point resolution for 50 × 50 μm 2 pixels is measured as 4.0 μm for non-irradiated samples, and 6.3 μm after irradiation to $\Phi_{\text {eq}}$ = 7.2 × 10 15 cm –2 .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Status of the NGNP fuel experiment AGR-2 irradiated in the advanced test reactor

The United States Department of Energy's Next Generation Nuclear Plant (NGNP) Advanced Gas Reactor (AGR) Fuel Development and Qualification Program will be irradiating up to seven separate low enriched uranium (LEU) tri-isotopic (TRISO) particle fuel (in compact form) experiments in the Advanced Test Reactor (ATR) located at the Idaho National Laboratory (INL). These irradiations and fuel development are being accomplished to support development of the next generation reactors in the United States, and will be irradiated over the next several years to demonstrate and qualify new TRISO coated particle fuel for use in high temperature gas reactors. The goals of the irradiation experiments are to provide irradiation performance data to support fuel process development, to qualify fuel for normal operating conditions, to support development and validation of fuel performance and fission product transport models and codes, and to provide irradiated fuel and materials for post irradiation examination (PIE) and safety testing. The experiments, which will each consist of at least six separate capsules, will be irradiated in an inert sweep gas atmosphere with individual on-line temperature monitoring and control of each capsule. The sweep gas will also undergo on-line fission product monitoring to track performance of the fuel in each individual capsule during irradiation. The first experiment (designated AGR-1) started irradiation in December 2006 and was completed in November 2009. The second experiment (AGR-2), which utilized the same experiment design as well as control and monitoring systems as AGR-1, started irradiation in June 2010 and is currently scheduled to be completed in April 2013. The design of this experiment and sup

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Recoil-α-fission and recoil-α–α-fission events observed in the reaction 48 Ca + 243 Am

Here, products of the fusion-evaporation reaction 48 Ca+ 243 Am were studied at the GSI Helmholtzzentrum für Schwerionenforschung, Darmstadt, Germany. Amongst the detected thirty correlated α-decay chains associated with the production of element Z=115, two recoil-α-fission and five recoil-α–α-fission events were observed. The latter five chains are similar to four such events reported from experiments performed at the Dubna gas-filled separator, and three such events reported from an experiment at the Berkeley gas-filled separator. The four chains observed at the Dubna gas-filled separator were assigned to start from the 2 n -evaporation channel 289 115 due to the fact that these recoil-α–α-fission events were observed only at low excitation energies. Contrary to this interpretation, we suggest that some of these recoil-α–α-fission decay chains, as well as some of the recoil-α–α-fission and recoil-α-fission decay chains reported from Berkeley and in this article, start from the 3 n -evaporation channel 288 115.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Status of the CUORE and results from the CUORE-0 neutrinoless double beta decay experiments

CUORE is a 741 kg array of TeO 2 bolometers for the search of neutrinoless double beta decay of 130 Te. The detector is being constructed at the Laboratori Nazionali del Gran Sasso, Italy, where it will start taking data in 2015. If the target background of 0.01 counts/(keV·kg·y) will be reached, in five years of data taking CUORE will have a 1σ half life sensitivity of 10 26 y. CUORE-0 is a smaller experiment constructed to test and demonstrate the performances expected for CUORE. The detector is a single tower of 52 CUORE-like bolometers that started taking data in spring 2013. The status and perspectives of CUORE will be discussed, and the first CUORE-0 data will be presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Novel deformation function creating or destroying any number of even kink solutions

Here, we present a one-parameter family of deformation functions f(Φ) which have novel properties. Firstly, the deformation function is its own inverse. We show that a class of potentials remains invariant under this deformation. Further, when applied to a certain class of kink bearing potentials, one obtains potentials which are not bounded from below. Besides, we show that there is a wide class of potentials having power law kink tails which are connected by this deformation but the corresponding kink tails of the two potentials have different asymptotic behavior. Finally, we show that when this deformation function is applied to an appropriate one-parameter family of potentials having two kink solutions, it creates new potentials with an arbitrary even number (2n) of kink solutions. Conversely, by starting from this potential with 2n kink solutions the deformation function annihilates 2n-2 kinks and we get back the potential which we started with having only two kink solutions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Tracking of Marangoni driven motion during laser powder bed fusion

Laser Powder Bed Fusion (LPBF) can be used to create Functionally Graded Materials (FGMs) by selectively distributing property augmenting particles throughout the build matrix. With this method parts can be created with nonhomogeneous properties tuned to spatially varied, pre-determined design constraints. To unlock this capability, the fluid motion that occurs in the molten liquid phase must be thoroughly understood. More importantly, the actual tracking of motion during the LPBF process is needed. Further, a numerical model of heat transfer and fluid flow in LPBF process was created. Using results from the model the motion of particles starting at many different locations was tracked. The average change in position for these particles based on starting location was calculated. The effects of non-dimensional parameters on melt pool size were examined. These results were validated experimentally and compared to what is available in the literature.

42 ENGINEERING↗