Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reconfiguration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

An initial investigation into methods of computing transonic aerodynamic sensitivity coefficients

Continuing studies associated with the development of the quasi-analytical (QA) sensitivity method for three dimensional transonic flow about wings are presented. Furthermore, initial results using the quasi-analytical approach were obtained and compared to those computed using the finite difference (FD) approach. The basic goals achieved were: (1) carrying out various debugging operations pertaining to the quasi-analytical method; (2) addition of section design variables to the sensitivity equation in the form of multiple right hand sides; (3) reconfiguring the analysis/sensitivity package in order to facilitate the execution of analysis/FD/QA test cases; and (4) enhancing the display of output data to allow careful examination of the results and to permit various comparisons of sensitivity derivatives obtained using the FC/QA methods to be conducted easily and quickly. In addition to discussing the above goals, the results of executing subcritical and supercritical test cases are presented.

Carlson, Leland A.↗
NASA NTRS1991

A general graphical user interface for automatic reliability modeling

Reported here is a general Graphical User Interface (GUI) for automatic reliability modeling of Processor Memory Switch (PMS) structures using a Markov model. This GUI is based on a hierarchy of windows. One window has graphical editing capabilities for specifying the system's communication structure, hierarchy, reconfiguration capabilities, and requirements. Other windows have field texts, popup menus, and buttons for specifying parameters and selecting actions. An example application of the GUI is given.

Liceaga, Carlos A.↗
NASA NTRS1991

The role of the Remotely Augmented Vehicle (RAV) laboratory in flight research

An overview is presented of the unique capabilities and historical significance of the Remotely Augmented Vehicle (RAV) Lab at NASA-Dryden. The role is reviewed of the RAV Lab in enhancing flight test programs and efficient testing of new aircraft control laws. The history of the RAV Lab is discussed with a sample of its application using the X-29 aircraft. The RAV Lab allows for closed or open loop augmentation of the research aircraft while in flight using ground based, high performance real time computers. Telemetry systems transfer sensor and control data between the ground and the aircraft. The RAV capability provides for enhanced computational power, improved flight data quality, and alternate methods for the testing of control system concepts. The Lab is easily reconfigured to reflect changes within a flight program and can be adapted to new flight programs.

Cohen, Dorothea↗
NASA NTRS1991

The NASA Lewis Research Center Internal Fluid Mechanics Facility

An experimental facility specifically designed to investigate internal fluid duct flows is described. It is built in a modular fashion so that a variety of internal flow test hardware can be installed in the facility with minimal facility reconfiguration. The facility and test hardware interfaces are discussed along with design constraints of future test hardware. The plenum flow conditioning approach is also detailed. Available instrumentation and data acquisition capabilities are discussed. The incoming flow quality was documented over the current facility operating range. The incoming flow produces well behaved turbulent boundary layers with a uniform core. For the calibration duct used, the boundary layers approached 10 percent of the duct radius. Freestream turbulence levels at the various operating conditions varied from 0.64 to 0.69 percent of the average freestream velocity.

Porro, A. R.↗
NASA NTRS1991

Stochastic availability analysis of operational data systems in the Deep Space Network

Existing availability models of standby redundant systems consider only an operator's performance and its interaction with the hardware performance. In the case of operational data systems in the Deep Space Network (DSN), in addition to an operator system interface, a controller reconfigures the system and links a standby unit into the network data path upon failure of the operating unit. A stochastic (Markovian) process technique is used to model and analyze the availability performance and occurrence of degradation due to partial failures are quantitatively incorporated into the model. Exact expressions of the steady state availability and proportion degraded performance measures are derived for the systems under study. The interaction among the hardware, operator, and controller performance parameters and that interaction's effect on data availability are evaluated and illustrated for an operational data processing system.

Issa, T. N.↗
NASA NTRS1991

Fluid handling 2: Surgical applications

The methods proposed for managing fluids and particulate debris during minor surgery on Space Station Freedom (SSF) were investigated and demonstrated. A KC-135 parabolic flight test was performed, in which the flight followed the standard 40 parabola profile with 20 to 25 seconds in near-zero gravity in each parabola. The equipment (suction and laminar flow device) was evaluated. While this equipment performed satisfactorily previously in the dental simulation, the purpose of the current flight was to reconfigure the equipment in support of a minor surgical situation in order to evaluate its efficacy and establish clear requirements for the actual flight hardware. To accomplish the study the Health Maintenance Facility medical restraint system was deployed as for surgical use and mannequin suture arm was restrained to its surface. The surgical area was established as for performing minor surgery with standard tray and suture instruments employed.

Billica, Roger↗
NASA NTRS1990

Optical computing and image processing using photorefractive gallium arsenide

Recent experimental results on matrix-vector multiplication and multiple four-wave mixing using GaAs are presented. Attention is given to a simple concept of using two overlapping holograms in GaAs to do two matrix-vector multiplication processes operating in parallel with a common input vector. This concept can be used to construct high-speed, high-capacity, reconfigurable interconnection and multiplexing modules, important for optical computing and neural-network applications.

Cheng, Li-Jen↗
NASA NTRS1990

Vibration environment - Acceleration mapping strategy and microgravity requirements for Spacelab and Space Station

In order to define the acceleration requirements for future Shuttle and Space Station Freedom payloads, methods and hardware characterizing accelerations on microgravity experiment carriers are discussed. The different aspects of the acceleration environment and the acceptable disturbance levels are identified. The space acceleration measurement system features an adjustable bandwidth, wide dynamic range, data storage, and ability to be easily reconfigured and is expected to fly on the Spacelab Life Sciences-1. The acceleration characterization and analysis project describes the Shuttle acceleration environment and disturbance mechanisms, and facilitates the implementation of the microgravity research program.

Martin, Gary L.↗
NASA NTRS1990

Cleft contribution to ring current formation

The storm time transport of ionospheric plasma from the 'cleft fountain' to the plasma sheet and ring current is investigated by means of three-dimensional trajectory codes. Using observations to define the source location and flow rate, test particles are traced during a 'taillike' to 'dipolelike' reconfiguration of the geomagnetic field. Emphasis is placed on the behavior of heavy ions of low charge state, O(+). As a result of their long periods of gyration, these ions are highly sensitive to rapid field variations and possibly display transient nonadiabatic motions. It is demonstrated that O(+) which have originated in the high-latitude ionosphere but which find themselves in the vicinity of the equator at substorm onset can experience considerable energization (from several keV up to several hundred keV) and pitch angle increase leading to trapping, as an effect of the induced electric field.

Delcourt, D. C.↗
NASA NTRS1990

Redundant single gimbal control moment gyroscope singularity analysis

The robotic manipulator is proposed as the mechanical analog to single gimbal control moment gyroscope systems, and it is shown that both systems share similar difficulties with singular configurations. This analogy is used to group gimbal angles corresponding to any momentum state into different families. The singularity problem associated with these systems is examined in detail. In particular, a method is presented to test for the possibility of nontorque-producing gimbal motion at a singular configuration, as well as to determine the admissible motions in the case when this is possible. Sufficient conditions are derived for instances where the singular system can be reconfigured into a nonsingular state by these nontorque-producing motions.

Bedrossian, Nazareth S.↗
NASA NTRS1990

Design of an optically controlled Ka-band GaAs MMIC phased-array antenna

Phased array antennas long were investigated to support the agile, multibeam radiating apertures with rapid reconfigurability needs of radar and communications. With the development of the Monolithic Microwave Integrated Circuit (MMIC), phased array antennas having the stated characteristics are becoming realizable. However, at K-band frequencies (20 to 40 GHz) and higher, the problem of controlling the MMICs using conventional techniques either severely limits the array size or becomes insurmountable due to the close spacing of the radiating elements necessary to achieve the desired antenna performance. Investigations were made that indicate using fiber optics as a transmission line for control information for the MMICs provides a potential solution. By adding an optical interface circuit to pre-existing MMIC designs, it is possible to take advantage of the small size, lightweight, mechanical flexibility and RFI/EMI resistant characteristics of fiber optics to distribute MMIC control signals. The architecture, circuit development, testing and integration of optically controlled K-band MMIC phased array antennas are described.

Kunath, Richard R.↗
NASA NTRS1990

A robotic return to the moon

The autonomous lunar precursor mission presently proposed for low cost manned revisits to the lunar surface, designated 'Lunar Oasis by Automation and Robotics', employs two self-similar robotic vehicles, and three experimental 'biovolumes' which are directly derived from the lunar landers that are initially entrusted with fulfilling mission hardware-delivery requirements. The two vehicles would support the experimental biovolumes by returning resources for use in physicochemical or biological processing. Delivered resources would be combined with those in situ to furnish reconfigured biovolumes with the capabilities for autonomous biological growth and wastes-reprocessing demonstrations.

Luttges, Marvin W.↗
NASA NTRS1990

An expert system to perform on-line controller restructuring for abrupt model changes

This paper presents the work in progress on an expert system utilized to tune and reconfigure airframe/engine control systems on-line in real time in response to structural or battle damage failures. The closed loop system is monitored constantly for changes in performance and structure, which detection prompts the expert system to select and apply a particular control restructuring algorithm based on the severity and type of damage. Control restructuring algorithms that have been implemented handle most failure cases involving actuator damage (control mixer) and many instances where the system dynamics are altered as well (modified control mixer).

Litt, Jonathan↗
NASA NTRS1990

State reduction for semi-Markov reliability models

Semi-Markov processes have proved to be an effective and convenient tool to construct models of systems that achieve reliability by redundancy and reconfiguration. These models are able to depict complex system architectures and to capture the dynamics of fault arrival and system recovery. A disadvantage of this approach is that the models can be extremely large, which poses both a model construction and a computational problem. Techniques are needed to reduce the model size. Because these systems are used in critical applications where failure can be expensive, there must be an analytically derived bound for the error produced by the model reduction technique. Automatic model generation programs have been written to help the reliability analyst produce models of complex systems. Because of the importance of these programs, the model reduction technique needs to be precise and easily implemented. This paper presents a model reduction technique called trimming that can be applied to a popular class of systems. An error bound for the trimming procedure is derived that uses readily available system parameters. The trimming procedure is precisely described and appears easy to implement in a model generation program.

Reduced order systems↗
NASA NTRS1991

Ionospheric convection response to changing IMF direction

By combining ground-based and satellite-based measurements of ionospheric electric fields, conductivities and magnetic perturbations, it was possible to examine the characteristics of instantaneous, ionospheric convection patterns associated with changing directions of the interplanetary magnetic field (IMF). In response to a rapid southward-to-northward turning of the IMF on July 23, 1983, the ionospheric convection reconfigured over a period of 40 minutes. The configuration changed from a conventional two-cell pattern to a contracted four-cell pattern, with reversed convection cells in the high-latitude dayside, associated with a strong potential drop of about 75 kV. Later, in response to a gradual rotation of the IMF from the +Z through the -Y toward the -Z direction, the nightside cells disappeared and the dawn cell in the reversed pair wrapped around and displaced the dusk cell until a conventional two-cell pattern was reestablished, largely in accord with the qualitative model of Crooker (1988). The results suggest that multiple cells can arise as a result of strong southward to northward transitions in the IMF. They appear to persist for sometime thereafter.

Knipp, D. J.↗
NASA NTRS1990

Functional requirements for an intelligent RPC

An intelligent remote power controller (RPC) based on microcomputer technology can implement advanced functions for the accurate and secure detection of all types of faults on a spaceborne electrical distribution system. The intelligent RPC will implement conventional protection functions such as overcurrent, under-voltage, and ground fault protection. Advanced functions for the detection of soft faults, which cannot presently be detected, can also be implemented. Adaptive overcurrent protection changes overcurrent settings based on connected load. Incipient and high-impedance fault detection provides early detection of arcing conditions to prevent fires, and to clear and reconfigure circuits before soft faults progress to a hard-fault condition. Power electronics techniques can be used to implement fault current limiting to prevent voltage dips during hard faults. It is concluded that these techniques will enhance the overall safety and reliability of the distribution system.

Aucoin, B. M.↗
NASA NTRS1990

High-performance optical disk mass storage for aerospace imaging systems

The specifications and techniques related to the development of the NASA Spaceflight Optical Disk Recorder (SODR) are presented. The system is being developed for the temporary storage of high-resolution sensor data that will be collected at high data rates by future space programs. Typical spaceflight recording requirements are given for the Space Station Freedom, the Earth Observing System, and some planetary missions. SODR module characteristics are listed, emphasizing the two independent optical disk recorders and the random access to 5 gigabytes of data on each side of the disks. The modular design includes two I/O ports providing 150 Mbits/sec user data rate each, and multimodule reconfigurable architecture permitting the synchronization of up to 16 modules with a maximum data rate of 4.8 gigabits/sec.

Ravner, Stephen M.↗