Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reaction Time”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Hydrazine vapor detonations

The detonation velocity and cell widths for hydrazine decomposition were measured over a wide range of temperatures and pressures. The detonation velocity in pure hydrazine was within 5 percent of the calculated C-J velocity. The detonation cell width measurements were interpreted using the Zeldovich-Doering-von Neumann model with a detailed reaction mechanism for hydrazine decomposition. Excellent agreement with experimental data for pure hydrazine was obtained using the empirical relation that detonation cell width was equal to 29 times the kinetically calculated reaction zone length.

Pedley, M. D.↗
DOE OSTI2020

Real-time tracking of protein unfolding with time-resolved x-ray solution scattering

The correct folding of proteins is of paramount importance for their function, and protein misfolding is believed to be the primary cause of a wide range of diseases. Protein folding has been investigated with time-averaged methods and time-resolved spectroscopy, but observing the structural dynamics of the unfolding process in real-time is challenging. Here, we demonstrate an approach to directly reveal the structural changes in the unfolding reaction. We use nano- to millisecond time-resolved x-ray solution scattering to probe the unfolding of apomyoglobin. The unfolding reaction was triggered using a temperature jump, which was induced by a nanosecond laser pulse. We demonstrate a new strategy to interpret time-resolved x-ray solution scattering data, which evaluates ensembles of structures obtained from molecular dynamics simulations. We find that apomyoglobin passes three states when unfolding, which we characterize as native, molten globule, and unfolded. The molten globule dominates the population under the conditions investigated herein, whereas native and unfolded structures primarily contribute before the laser jump and 30 μs after it, respectively. The molten globule retains much of the native structure but shows a dynamic pattern of inter-residue contacts. Our study demonstrates a new strategy to directly observe structural changes over the cause of the unfolding reaction, providing time- and spatially resolved atomic details of the folding mechanism of globular proteins.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Bifunctional Metal‐Organic Nanoballs Featuring Lewis Acidic and Basic Sites as a New Platform for One‐Pot Tandem Catalysis

Abstract The design and synthesis of polyhedra using coordination‐driven self‐assembly has been an intriguing research area for synthetic chemists. Metal‐organic polyhedra are a class of intricate molecular architectures that have garnered significant attention in the literature due to their diverse structures and potential applications. Hereby, we reportCu‐MOP, a bifunctional metal‐organic cuboctahedra built using 2,6‐dimethylpyridine‐3,5‐dicarboxylic acid and copper acetate at room temperature. The presence of both Lewis basic pyridine groups and Lewis acidic copper sites imparts catalytic activity to Cu‐MOP for the tandem one‐pot deacetalization‐Knoevenagel/Henry reactions. The effect of solvent system and time duration on the yields of the reactions was studied, and the results illustrate the promising potential of these metal‐organic cuboctahedra, also known as nanoballs for applications in catalysis.

Chemistry↗
DOE OSTI2018

Fluorescein-sensitized Au/g-C3N4 nanocomposite for enhanced photocatalytic hydrogen evolution under visible light

Highlights: • Preparation of Au/g-C{sub 3}N{sub 4} composite through protonation, adsorption and reduction. • Au nanoparticles with average diameter of 4.1 nm are homogeneous deposited on g-C{sub 3}N{sub 4}. • The H{sub 2} evolution rate of Au/g-C{sub 3}N{sub 4} raises by 22 times after fluorescein sensitization. • Efficient transfer of photo-generated electrons among fluorescein, g-C{sub 3}N{sub 4} and Au. - Abstract: Au/g-C{sub 3}N{sub 4} composite is prepared through protonation of g-C{sub 3}N{sub 4}, followed by electrostatic adsorption of AuCl{sub 4{sup {sub −}}} and subsequent chemical reduction. The homogeneous deposition of Au nanoparticles with an average diameter of 4.1 nm on g-C{sub 3}N{sub 4} is confirmed by TEM measurement. Compared with pure g-C{sub 3}N{sub 4}, Au/g-C{sub 3}N{sub 4} composite exhibits a significant improvement in the photocatalytic activity for H{sub 2} production from water in the presence of triethanolamine as sacrificial electron donor under visible light irradiation (λ > 420 nm). Significantly, the rate of H{sub 2} production increases more than 22 times by adding fluorescein in the photocatalytic reaction system. It is more than 25 times higher than that of protonated g-C{sub 3}N{sub 4} in the presence of fluorescein. Based on our experimental results, the mechanism of photocatalytic activity for H{sub 2} evolution over fluorescein-sensitized Au/g-C{sub 3}N{sub 4} nanocomposite is accordingly proposed. The highly-improved performance is ascribed to the efficient transfer of photo-generated electrons among photo-excited fluorescein molecule, g-C{sub 3}N{sub 4} and Au, which is supported by photoluminescence spectra and transient photocurrent responses.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2017

The Reaction of Criegee Intermediate CH 2 OO with Water Dimer: Primary Products and Atmospheric Impact

The rapid reaction of the smallest Criegee intermediate, CH 2 OO, with water dimers is the dominant removal mechanism for CH 2 OO in the Earth's atmosphere, but its products are not well understood. This reaction was recently suggested as a significant source of the most abundant tropospheric organic acid, formic acid (HCOOH), which is consistently underpredicted by atmospheric models. Furthermore, using time-resolved measurements of reaction kinetics by UV absorption and product analysis by photoionization mass spectrometry, we show that the primary products of this reaction are formaldehyde and hydroxymethyl hydroperoxide (HMHP), with direct HCOOH yields of less than 10%. Incorporating our results into a global chemistry-transport model further reduces HCOOH levels by 10–90%, relative to previous modeling assumptions, which indicates that the reaction CH 2 OO + water dimer by itself cannot resolve the discrepancy between the measured and predicted HCOOH levels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

In situ study on the effect of thermomigration on intermetallic compounds growth in liquid-solid interfacial reaction

Synchrotron radiation real-time imaging technology was carried out in situ to observe and characterize the effect of thermomigration on the growth behavior of interfacial intermetallic compounds (IMCs) in Cu/Sn/Cu solder joint during soldering. The thermomigration resulted in asymmetrical formation and growth of the interfacial IMCs. Cu{sub 6}Sn{sub 5} and Cu{sub 3}Sn IMCs formed at the cold end and grew rapidly during the whole soldering process. However, only Cu{sub 6}Sn{sub 5} IMC formed at the hot end and remained relatively thin until solidification. The IMCs at the cold end were nearly seven times thicker than that at the hot end after solidification. The Cu dissolution at the cold end was significantly restrained, while that at the hot end was promoted, which supplied Cu atoms to diffuse toward the cold end under thermomigration to feed the rapid IMC growth. Moreover, the thermomigration also caused asymmetrical morphology of the interfacial IMCs at the cooling stage, i.e., the Cu{sub 6}Sn{sub 5} IMC at the cold end transformed into facet structure, while that at the hot end remained scallop-type. The asymmetrical growth behavior of the interfacial IMCs was analyzed from the view point of kinetics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Reconceptualizing the Ir III Role in Metallaphotoredox Catalysis: From Strong Photooxidant to Potent Energy Donor

Dual Ir III /L n Ni II metallaphotoredox catalyzed C(sp 3 )–C(sp 2 ) cross-coupling reactions are widely assumed to proceed by photoinduced single electron transfer steps due to the highly oxidizing Ir III * excited state (Ir III = [Ir(dF(CF 3 )ppy) 2 (dtbbpy)] + [PF 6 ] – ; dF(CF 3 )ppy = 2-(2,4-difluorophenyl)-5-(trifluoromethyl)pyridine; L n = dtbbpy = 4,4'-di-tert-butyl-2,2'-bipyridine). Using time-resolved absorption and emission spectroscopy, we reveal that energy transfer between Ir III * and various LnNi II precatalysts and intermediates with k q ≥ 10 8 M –1 s –1 also drives catalysis. Specifically, the excited states of L n Ni II dihalide precatalysts/organometallic intermediates accessible by energy transfer appear to drive bond homolysis, halogen radical elimination, and reductive elimination reactions that facilitate formation of cross-coupled products. Energy transfer dynamics consequently circumvent the need for photoinduced electron transfer, thereby extending substrate scopes to coupling partners that cannot be oxidized by Ir III *. Within a cross-electrophile coupling model reaction between 4-bromobenzotrifluoride and bromocyclohexane, energy transfer activates the L n Ni II precatalyst at early reaction times before nucleophilic reductants are present. In the absence of Ir III , direct excitation of L n Ni II (Br) 2 also activates the precatalyst to form a L n Ni II (Br)(Aryl) intermediate. To compare energy transfer and electron transfer kinetics, we determined rate constants for reductive quenching by Br – (k SET = 4.1 × 10 8 M –1 s –1 ) and for the subsequent electron transfer from reduced Ir III•– to L n Ni II (Br) 2 (k SET = 4.1 × 10 7 M –1 s –1 ) using Stern-Volmer analysis and pulse radiolysis, respectively. Energy transfer rate constants are competitive with the electron transfer rate constants and energy transfer is a parallel pathway within metallaphotoredox catalysis. Exploiting the energy transfer mechanism, we demonstrate highly selective cross-electrophile coupling between 4-chlorobenzotrifluoride and bromocyclohexane to form exclusively cross-coupled product. Here, with alkyl-trifluoroborate nucleophiles that do not reductively quench IrIII* emission, transmetalation with L n Ni II (Br/Cl)(Aryl) followed by energy transfer also drives excited state reductive elimination to form C(sp 3 )–C(sp 2 ) cross-coupled product. Similarly, energy transfer rather than Ni II oxidation drives C(sp 2 )–OR reductive elimination, despite the strongly oxidizing ability of Ir III *. In total, these reactions demonstrate energy transfer processes from Ir III * to L n Ni II in metallaphotoredox catalysis that can unlock alternative reactive pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Synthesis and electrochemical assessment of Ce{sub 0.5}Yb{sub 0.5}O{sub 1.75} ceramics and derived composite electrolytes

Highlights: • Ce{sub 0.5}Yb{sub 0.5}O{sub 1.75} prepared for the first time through solid state reaction. • High energy milling needed to assist the ceramic route. • Ce{sub 0.5}Yb{sub 0.5}O{sub 1.75} is oxide-ion conductor in air and n-type conductor at low pO{sub 2}. • Ce{sub 0.5}Yb{sub 0.5}O{sub 1.75} decomposes slightly when exposed to alkaline carbonates. • Composites based on Ce{sub 0.5}Yb{sub 0.5}O{sub 1.75} show standard electrical performance. - Abstract: Ce{sub 0.5}Yb{sub 0.5}O{sub 1.75} was prepared for the first time through high temperature (1600 °C for 5 h) solid state reaction, after high energy milling to enhance the mechano-chemical interaction of precursor oxides (CeO{sub 2} and Yb{sub 2}O{sub 3}). Single phase formation was confirmed by powder X-ray diffraction. Impedance spectroscopy data obtained under wide temperature (300–800 °C) and oxygen partial pressure (0.21 to about 10{sup −25} atm) ranges indicates that this material exhibits predominant oxide-ion conductivity under oxidizing conditions while n-type electronic conductivity prevails at low oxygen partial pressure. The mixed oxide shows modest ionic conductivity (1.1 × 10{sup −3} S cm{sup −1} at 800 °C) with activation energy of 1.3 eV in the 600–800 °C temperature range. When combined with molten carbonates (Li{sub 2}CO{sub 3} + Na{sub 2}CO{sub 3}, 1:1 molar ratio) to produce composite electrolytes, Ce{sub 0.5}Yb{sub 0.5}O{sub 1.75} slightly decomposed. However, the composite electrical performance is still acceptable and closely matches the conductivity of similar materials (>0.1 S cm{sup −1} immediately above 500 °C)

36 MATERIALS SCIENCE↗
DOE OSTI2016

Cluster assisted water dissociation mechanism in MOF-74 and controlling it using helium

We show that the water dissociation reaction H2O → OH + H in the confined environment of MOF-74 channels can be precisely controlled by the addition of noble gas He. Elucidating the entire reaction process using ab initio methods and infrared (IR) spectroscopy, we prove that the interaction between water molecules is critical to the formation of water clusters, which reduce the dissociation barrier by up to 37% and thus influence the reaction significantly. Our time-resolved IR measurements confirm that the formation of these clusters can be suppressed by introducing He gas, providing unprecedented control over water dissociation rates. Since the water dissociation reaction is the cause of the structural instability of MOF-74 in the presence of water, our finding of the reaction mechanism lays the groundwork for designing water stable versions of MOF-74 as well as understanding water related phenomena in MOFs in general.

Chemistry↗
DOE OSTI2023

Characterizing the multi-dimensional reaction dynamics of dihalomethanes using XUV-induced Coulomb explosion imaging

Site-selective probing of iodine 4d orbitals at 13.1 nm was used to characterize the photolysis of CH 2 I 2 and CH 2 BrI initiated at 202.5 nm. Time-dependent fragment ion momenta were recorded using Coulomb explosion imaging mass spectrometry and used to determine the structural dynamics of the dissociating molecules. Correlations between these fragment momenta, as well as the onset times of electron transfer reactions between them, indicate that each molecule can undergo neutral three-body photolysis. For CH 2 I 2 , the structural evolution of the neutral molecule was simultaneously characterized along the C–I and I–C–I coordinates, demonstrating the sensitivity of these measurements to nuclear motion along multiple degrees of freedom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1973

Kinetics of CO2 production on Venus.

Consideration of theoretical limits and experimental data for the kinetics of the reaction quartz plus calcite yields wollastonite plus CO2 supports the concept of a short-term quasi-equilibrium state for the atmosphere of Venus. These data indicate that the time scale of this reaction and of any competing CO2 producing reaction may be as short as several hundred years or less at the inferred Venus surface temperatures.

Mueller, R. F.↗
NASA NTRS1993

Rates of oxidative weathering on the surface of Mars

A model of acid weathering is proposed for the iron-rich basalts on Mars. Aqueous oxidation of iron sulfides released SO4(2-) and H(+) ions that initiated the dissolution of basaltic ferromagnesian silicates and released Fe(2+) ions. The Fe(2+) ions eventually underwent ferrolysis reactions and produced insoluble hydrous ferric oxide phases. Measurements of the time-dependence of acid weathering reactions show that pyrrhotite is rapidly converted to pyrite plus dissolved ferrous iron, the rate of pyrite formation decreasing with rising pH and lower temperatures. On Mars, oxidation rates of dissolved Fe(2+) ions in equatorial melt-waters in contact with the atmosphere are estimated to lie in the range 0.3-3.0 ppb Fe/yr over the pH range 2 to 6. Oxidation of Fe(2+) ions is estimated to be extremely slow in brine eutectic solutions that might be present on Mars and to be negligible in the frozen regolith.

Burns, Roger G.↗
NASA NTRS1993

Heterogeneous chemistry on Antarctic polar stratospheric clouds - A microphysical estimate of the extent of chemical processing

A detailed model of polar stratospheric clouds (PSCs), which includes nucleation, condensational growth. and sedimentation processes, has been applied to the study of heterogeneous chemical reactions. For the first time, the extent of chemical processing during a polar winter has been estimated for an idealized air parcel in the Antarctic vortex by calculating in detail the rates of heterogeneous reactions on PSC particles. The resulting active chlorine and NO(x) concentrations at first sunrise are analyzed with respect to their influence upon the Antarctic ozone hole using a photochemical model. It is found that the species present at sunrise are primarily influenced by the relative values of the heterogeneous reaction rate constants and the initial gas concentrations. However, the extent of chlorine activation is also influenced by whether N2O5 is removed by reaction with HCl or H2O. The reaction of N2O5 with HCl, which occurs rapidly on type 1 PSCs, activates the chlorine contained in the reservoir species HCl. Hence the presence and surface area of type 1 PSCs early in the winter are crucial in determining ozone depletion.

Drdla, K.↗
DOE OSTI2022

Prospects for Neutron Reactions on Excited States in High-Density Plasmas

With the reactions of high flux neutrons, such as in a DT plasma, there is a prospect of seeing new kinds of neutron-nucleus reactions for the first time. If neutrons excite a heavy nucleus, for example, there is possibility of a second neutron reacting on excited states of the residual nucleus before that nucleus has de-excited to its ground state. The possibility of such reactions on excited states has rarely been considered. The cross section for neutron induced fission on the isomeric state of 235 U has been measured (D’Eer et al., Phys. Rev. C, 1988, 38: 1270–1276) and calculated (Younes et al., 2003, Maslov, 2007), and reactions on rotationally excited nuclear states has been calculated (Kawano et al., Phys. Rev. C, 2009, 80: 024611). In high flux plasmas, however, a much wider range of reactions is possible. We therefore need to consider excited states at much higher-energies than previously modeled, and then estimate whether second neutrons are likely to rescatter on those excited states. To determine the likelihood of such rescattering events, we first need to know the probable time series of nuclear decays of those excited states. The lifetimes of many low-lying states have been measured experimentally, but now we need to know the lifetimes of the many higher excited states that could be produced from incident 14 MeV neutrons. These are too numerous to be measured and also too numerous to be calculated individually, so statistical Hauser-Feshbach decay models are used. I show some lifetime calculations for 89 Y, 169 Tm, and 197 Au targets, and predictions for the number of rescattering events in plausible plasma scenarios.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2012

Ultra-high speed photomultiplier tubes with nanosecond gating for fusion diagnostics

Fusion diagnostics can involve the measurement of ultra-fast optical pulses, often in close temporal proximity. We present a solution for the diagnostics of gamma reaction history and neutron time of flight by using microchannel plate based photomultiplier tubes (PMTs). The time response of the PMTs can be as fast as 100 ps FWHM and with a gain of up to 10{sup 7}. To observe small events in close temporal proximity to much larger signals such as the down-scattered fraction, the response of MCP-PMTs can be gated with an on/off ratio of up to 10{sup 13} in just 2 ns.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

Experimental collaboration for thick concrete structures with alkali-silica reaction

Alkali-Silica Reaction (ASR) is a reaction that occurs over time in concrete between alkaline cement paste and reactive, non-crystalline silica in aggregates. An expansive gel is formed within the aggregates which results in micro-cracks in aggregates and adjacent cement paste. The reaction requires the presence of water and has been predominantly detected in groundwater-impacted portions of below grade structures, with limited impact to exterior surfaces in above grade structures. ASR can potentially affect concrete properties and performance characteristics such as compressive strength, modulus of elasticity, shear strength, and tensile strength. Since ASR degradation often takes significant amounts of time, developing ASR detection techniques is important to the sustainability and extended operation lifetimes of nuclear power plants (NPPs). The University of Tennessee, Knoxville (UTK) in collaboration with Oak Ridge National Laboratory (ORNL) designed and built an experiment representative of typical NPP structures to study ASR in thick concrete structures.

Ezell, N Dianne Bull↗
DOE OSTI2018

How Hydrologic Connectivity Regulates Water Quality in River Corridors

Abstract Downstream flow in rivers is repeatedly delayed by hydrologic exchange with off‐channel storage zones where biogeochemical processing occurs. We present a dimensionless metric that quantifies river connectivity as the balance between downstream flow and the exchange of water with the bed, banks, and floodplains. The degree of connectivity directly influences downstream water quality — too little connectivity limits the amount of river water exchanged and leads to biogeochemically inactive water storage, while too much connectivity limits the contact time with sediments for reactions to proceed. Using a metric of reaction significance based on river connectivity, we provide evidence that intermediate levels of connectivity, rather than the highest or lowest levels, are the most efficient in removing nitrogen from Northeastern United States’ rivers. Intermediate connectivity balances the frequency, residence time, and contact volume with reactive sediments, which can maximize the reactive processing of dissolved contaminants and the protection of downstream water quality. Our simulations suggest denitrification dominantly occurs in riverbed hyporheic zones of streams and small rivers, whereas vertical turbulent mixing in contact with sediments dominates in mid‐size to large rivers. The metrics of connectivity and reaction significance presented here can facilitate scientifically based prioritizations of river management strategies to protect the values and functions of river corridors.

Harvey, Jud↗