Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RANS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Validation of a CFD Model Predicting the Effect of High Level Lateral Acceleration Sloshing on the Heat Transfer and Pressure Drop in a Small-Scale Tank in Normal Gravity

A two-phase CFD model is developed to study the effects of sloshing with high level lateral acceleration on the heat transfer and pressure drop in a small scale tank. Computational results are compared to the data provided by a non-isothermal sloshing experiment without phase change conducted by T. Himeno et al. at the University of Tokyo and JAXA in 2011. The results of the current model are, also, compared to CFD predictions reported by Himeno et al. A step change in lateral acceleration was applied in the experiment. Different levels of lateral acceleration amplitude, varying between 0G and 0.5G, were considered. CFD results for interface movement and tank pressure are presented and compared in this paper to the experimental data for the case in which the value of lateral acceleration was set to 0.5G. The effects of initial and boundary conditions and turbulence modeling approach on the tank pressure change during sloshing are discussed in detail. The effect of conjugate heat transfer in the tank wall is also studied to show its important role in determining the tank pressure evolution. The results of the Reynolds Averaged Navier Stokes (RANS) models are compared to the results of the Large Eddy Simulation model (LES) to underscore the importance of correctly capturing the effects of turbulence for high fidelity predictions.

multiphase flow↗

Development of the Electrostatic Precipitator (ESP) for Mars and Electrodynamic Dust Shield (EDS)

Kennedy Space Center's Swamp Works is a fast-paced and diverse technology development laboratory that aims to advance commercial and government capabilities to colonize extraterrestrial environments. As a part of Swamp Works, the Electrostatic and Surface Physics Laboratory (ESPL) is currently developing new technologies that will further NASA's capabilities to colonize lunar and Martian environments. At the ESPL, the objective of the overall project is to aid in the dust mitigation of robotic and human exploration missions to the moon and Mars. The moon and Mars are covered with layers of dust, which can make long-term exploration missions very difficult. The team at the ESPL is developing an electrostatic precipitator (ESP) to aid in the reduction of interference from airborne Martian dust on equipment. The ESP is designed to mitigate the dust in an intake of CO2-rich dusty gas (i.e., the Martian atmosphere). The ESP is essentially a cylindrical tube with a coaxial wire electrode. Applying a high voltage through this electrode induces a corona discharge (a glowing plasma that envelops the electrode), which is used to charge the inflowing dust. The electric field caused by the corona pushes the charged dust to the walls of the precipitator, preventing the dust to flow out of the tube. Environmental dust can make long-term exploration missions very difficult, and settled dust is no exception. Settled lunar or Martian dust can hinder the performance and lifetime of equipment. For example, dust can settle on the solar panels of a lunar or Martian rover, decreasing its performance while increasing its charging time. To address this, the team at the ESPL is also developing an electrodynamic dust shield (EDS), which is designed to remove lunar or Martian dust from the surfaces of equipment. The EDS uses a non-uniform electric field to generate a dielectrophoretic force, which pushes the particles away from the surface of the shield. A number of dust shields will be tested on the exterior of the International Space Station (ISS) via MISSE-11, a flight payload to the ISS that will test the effects of long-term exposure to space on materials. During my internship at the ESPL, I aided in the development of these technologies. For the ESP, I helped characterize the electrical properties of various geometries and helped redesign the hardware of the testbed (the precipitator used to test this technology in the lab). To characterize the electrical properties of the ESP, I ran various tests of the precipitator, which consisted of varying the environmental conditions and geometry of the testbed. Analyzing the electrical properties of the ESP in various environmental conditions is necessary to characterize its collection efficiency, since it will be used in the dusty Martian environment. For the EDS, I helped analyze the dielectric strength of the surface of the shield via high-voltage testing. A dielectrically strong surface will help the shield survive the harsh environment of space, which will enable it to have both lunar and Martian applications.

Corona Discharge↗

Using Numerical Simulations to Explore Top-Mounted Propulsion on a Conceptual Commercial Supersonic Transport Aircraft

Reynolds Averaged Navier-Stokes (RANS) simulations were performed on an N+2 conceptual commercial supersonic transport aircraft to explore the possibility of relocating the engines from below the wings to above the wings in order to capitalize upon potential noise shielding benefits. The simulations focused on the feasibility of the top-mounted propulsion configuration in terms of inlet performance and flow separation around the nacelles at climbout conditions for both 0deg and 8deg angle of attack. The results showed overall good inlet performance and little separation around the nacelles. The results were comparable to the engines in their original underwing configuration.

Top-Mounted Propulsion↗

Numerical Simulations of a Quiet SuperSonic Technology (QueSST) Aircraft Preliminary Design

Reynolds Averaged Navier-Stokes (RANS) simulations were performed on a Lockheed Martin Quiet SuperSonic Technology (QueSST) aircraft preliminary design to assess inlet performance. The FUN3D flow solver and its adjoint-based grid refinement capability were used for the simulations in hopes of determining internal "best practices" for predicting inlet performance on top-aft-mounted inlets. Several parameters were explored including tetrahedral vs. pentahedral cells in/around the boundary-layer regions, an engine axis-aligned linear pressure sensor vs. a pressure box objective as the grid adaptation metric, and the number of grid adaptation cycles performed. Additional simulations were performed on manually refined grids for comparison with the adjoint-based adapted grids. Results showed poor agreement in predicted inlet performance on the refined grids compared to experimental data. This was true regardless of whether the refinement was adjoint-based or manual, the cell type in/near the boundary-layer regions, or the grid adaptation metric used. In addition, the 40-probe total pressure recovery was shown to decrease asymptotically as the number of adaptation cycles is increased. Solutions on the unadapted grids generally had better agreement with experimental data than their refined grid counterparts.

Inlet Performance↗

Aerodynamic Design and Optimization of Fan Stage for Boundary Layer Ingestion Propulsion System

The present paper addresses the process of preliminary design of a low-pressure fan and outlet guide vane (OGV) of a boundary layer ingestion (BLI) propulsion system. The tail-cone thruster systems of NASA's STARC_ABL (Single-aisle Turboelectric Aircraft with an Aft Boundary-Layer propulsor) adopts an axi-symmetric BLI type inlet as opposed to other embedded engine systems. Thus, the focus of the present work is placed on maximizing the efficiency of the fan and OGV stages under a significant radial distortion. A parameterization with B-spline function for camber line angles, metal chord, thickness distribution and stacking axis of blades is presented. The flowpath lines are also parameterized by B-spline function and aggregated in the design system of blades. The design optimization with evolutionary algorithm is performed with constraints of fan pressure ratio, OGV exit swirl angle and nozzle exit properties. The inlet conditions for the turbo-machinery CFD (Computational Fluid Dynamics) domain and the design goal of the fan stage are driven by a propulsion airframe integration (PAI) model that uses a 3-D unstructured RANS (Reynolds Average Navier Stokes) solver and actuator disk model. The expected power saving of the BLI propulsor is quantified via PAI analysis and the resulting preliminary design of the fan stages is compared with a clean-inlet flow propulsor.

Turbo-machinery↗

Silicon Carbide Pressure Sensors for Venus Environment

We report on the evaluation of 4H-SiC piezoresistive pressure sensors in the simulated Venus environment of the NASA Glenn Extreme Environments Rig (GEER). The purpose of the evaluation was to determine the survivability of the pressure and temperature sensors and ancillary packaging components when subjected to the high pressure and aggressive chemical media that are characteristic of the Venus environment. Interest in Venus has been stimulated by the ongoing debate about Earth's planetary evolution, particularly in regards to its climate, and NASA has proposed a flagship mission to Venus to be launched in the near future. Quantifying how the Venus evo-lution ran its course will greatly aid researchers trying to model Earth's climate dynamics.

high temperature↗

Numerical Simulations of a Quiet SuperSonic Technology (QueSST) Aircraft Preliminary Design

Reynolds Averaged Navier-Stokes (RANS) simulations were performed on the Lockheed Martin Quiet SuperSonic Technology (QueSST) aircraft preliminary design to assess inlet performance. The FUN3D flow solver and its adjoint-based grid refinement capability was used for the simulations in hopes of determining internal "best practices" for predicting inlet performance on top-aft-mounted inlets. Several parameters were explored including tetrahedral vs. pentahedral cells in/around the boundary-layer regions, an engine axis-aligned linear pressure sensor vs. a pressure box objective as the grid adaptation metric, and the number of grid adaptation cycles performed. Additional simulations were performed on manually refined grids for comparison with the adjoint-based adapted grids

Adjoint-based Grid Adaptation↗

Validation of A CFD Model Predicting the Effect of High Level Lateral Acceleration Sloshing on the Heat Transfer and Pressure Drop in A Small-Scale Tank in Normal Gravity

A two-phase CFD model is developed to study the effects of sloshing with high level lateral acceleration on the heat transfer and pressure drop in a small scale tank. Computational results are compared to the data provided by a non-isothermal sloshing experiment without phase change conducted by T. Himeno et al. at the University of Tokyo and JAXA in 2011 [1]. The results of the current model are, also, compared to CFD predictions reported by Himeno et al. [2]. A step change in lateral acceleration was applied in the experiment. Different levels of lateral acceleration amplitude, varying between 0G and 0.5G, were considered. CFD results for interface movement and tank pressure are presented and compared in this paper to the experimental data for the case in which the value of lateral acceleration was set to 0.5G. The effects of initial and boundary conditions and turbulence modeling approach on the tank pressure change during sloshing are discussed in detail. The effect of conjugate heat transfer in the tank wall is also studied to show its important role in determining the tank pressure evolution. The results of the Reynolds Averaged Navier Stokes (RANS) models are compared to the results of the Large Eddy Simulation model (LES) to underscore the importance of correctly capturing the effects of turbulence for high fidelity predictions.

multiphase flow↗

Inductive Pulsed Plasma Thruster Development Testing at NASA-MSFC

The inductive pulsed plasma thruster (IPPT) is an electromagnetic plasma accelerator that has been identified in NASA roadmaps as an enabling propulsion technology for some niche low-power missions and for high-power in-space propulsion needs. The IPPT is an electrodeless space propulsion device where a capacitor is charged to an initial voltage and then discharged producing a high current pulse through a coil. The field produced by this pulse ionizes propellant, inductively driving current in a plasma located near the face of the coil. Once the plasma is formed it can be accelerated and expelled at a high exhaust velocity by the electromagnetic Lorentz body force arising from the interaction of the induced plasma current and the magnetic field produced by the current in the coil. Thrusters of this type possess many demonstrated and potential benefits that make them worthy of continued investigation. The electrodeless nature of these thrusters eliminates the lifetime and contamination issues associated with electrode erosion in conventional electric thrusters. Also, a wider variety of propellants are accessible when compatibility with metallic electrodes in no longer an issue. IPPTs have been successfully operated using propellants like ammonia, hydrazine, and CO2, and there is no fundamental reason why they would not operate on other in situ propellants like H2O. It is well-known that pulsed accelerators can maintain constant specific impulse (I(sub sp)) and thrust efficiency (η(sub t)) over a wide range of input power levels by adjusting the pulse rate to hold the discharge energy per pulse constant. It has also been demonstrated that an inductive pulsed plasma thruster can operate in a regime where η(sub t) is relatively constant over a wide range of I(sub sp) values (3000-8000 s). Finally, thrusters in this class have operated in single-pulse mode at high energy per pulse, and by increasing the pulse rate they offer the potential to process very high levels of power using a single thruster. There has been significant previous research on IPPTs designed around a planar-coil (flat-plate) geometry. The most notable of these was the Pulsed Inductive Thruster (PIT), with the PIT MkV presently representing the state of- the-art in pulsed high-power IPPT technological development. In this paper, we focus on two planar-geometry devices that operate at significantly different power levels. Most work performed at NASA-Marshall Space Flight Center (MSFC) has, to date, focused on lower power thruster operation (≈ 10s to 100s of J/pulse, up to 2-2.5 kW average power throughput) and previously described in Refs. [5,6]. The most recent work aimed to assemble a device that could be tested in cyclic mode on a thrust-stand, and which could augment the existing data set for IPPTs. In addition, the thruster was designed to serve as a test-bed for solid state switching circuitry and pulsed gas valves, with the modular design of the device allowing for variation in or upgrades to test configuration. Recently, MSFC obtained on loan from the Georgia Institute of Technology (Atlanta, GA) the PIT MkVI, successor to the PIT MkV. The MkV and MkVI are similar in design with much of the hardware from the former, specifically the capacitors and spark-gap switches, being reused in the latter. The coil is simliar in geometry but has bent copper rods used in the latest iteration in place of the Litz wire windings found in the MkV. The MkVI master switch for the spark gaps is located in the vacuum chamber contained within a sealed, pressurized vessel fastened to the back of the thruster. This is different from the MkV where many capacitor charging lines and spark gap-triggering delay lines ran to the thruster from a master trigger located outside the vacuum chamber. The MkVI was damaged during testing soon after its fabrication was completed. The thruster arrived at MSFC still-damaged and mostly disassembled into many individual pieces. The device has been repaired, with a few additional design changes implemented after discussions with the late Prof. Lovberg regarding the initial testing results and issues encountered.

Polzin, Kurt A.↗

Computational Fluid Dynamics Analysis of the Stall Characteristics of a Wing Design Based on Prandtl's Minimum Induced Drag

Stall characteristics of a wing whose design was based on Prandtl’s minimum induced drag analysis is presented. Flow field is resolved using RANS CFD (Computational Fluid Dynamics) solver OVERFLOW-2. Both in freestream and in ground effect are analyzed. In addition, effect of low-Mach preconditioner on the stall characteristic is presented. Results show that simulations that lack preconditioner predicts higher stall angle as well as much more benign behavior near the stall angle. Stall analysis in freestream show that flow begins to separate at the inboard region. The flow at the tip remains attached until approximately 19.0 degrees angle of attack.

PRANDTL↗

Numerical Simulations of a Quiet SuperSonic Technology (QueSST) Aircraft Preliminary Design

Reynolds Averaged Navier-Stokes (RANS) simulations were performed on the Lockheed Martin Quiet SuperSonic Technology (QueSST) aircraft preliminary design to assess inlet performance. The FUN3D flow solver and its adjoint-based grid refinement capability was used for the simulations in hopes of determining internal "best practices" for predicting inlet performance on top-aft-mounted inlets. Several parameters were explored including tetrahedral vs. pentahedral cells in/around the boundary-layer regions, an engine axis-aligned linear pressure sensor vs. a pressure box objective as the grid adaptation metric, and the number of grid adaptation cycles performed. Additional simulations were performed on manually refined grids for comparison with the adjoint-based adapted grids

Adjoint-based Grid Adaptation↗

Using Numerical Simulations to Explore Top-Mounted Propulsion on a Conceptual Commercial Supersonic Transport Aircraft

Reynolds Averaged Navier-Stokes (RANS) simulations were performed on an N+2 conceptual commercial supersonic transport aircraft to explore the possibility of relocating the engines from below the wings to above the wings in order to capitalize upon potential noise shielding benefits. The simulations focused on the feasibility of the top-mounted propulsion configuration in terms of inlet performance and flow separation around the nacelles at take-off conditions for both 0deg and 8deg angle of attack. The results showed overall good inlet performance and little separation around the nacelles. The results were comparable to the engines in their original underwing configuration.

Friedlander, David J.↗

Generation of Mars Helicopter Rotor Model for Comprehensive Analyses

The present research is aimed at providing a performance model for the Mars Helicopter (MH), to understand the complexity of the flow, and identify future regions of improvement. The low density of the Martian atmosphere and the relatively small MH rotor, result in very low chord-based Reynolds number flows. The low density and Reynolds numbers reduce the lifting force and lifting efficiency, respectively. The high drag coefficients in subcritical flow, especially for thicker sections, are attributed to laminar separation from the rear of the airfoil. In the absence of test data, efforts have been made to explore these effects using prior very low Reynolds number research efforts. The rotor chord-based Reynolds number range is observed to be subcritical, which makes boundary layer transition unlikely to occur. The state of the two-dimensional rotor boundary layer in hover is approximated by calculating the instability point, laminar separation point, and the transition location to provide understanding of the flow state in the high Mach-low Reynolds number regime. The results are used to investigate the need for turbulence modeling in Computational Fluid Dynamics (CFD) calculations afterwards. The goal is to generate a performance model for the MH rotor for a free wake analysis, because the computational budget for a complete Navier-Stokes solution for a rotating body-fitted rotor is substantial. In this study, a Reynolds-Averaged Navier-Stokes (RANS) based approach is used to generate the airfoil deck using C81Gen with stitched experimental data for very high angles of attack. A full Grid Resolution Study is performed and over 4,500 cases are completed to create the full airfoil deck. The laminar separation locations are predicted within the accuracy of the approximate method when compared with the CFD calculations. The model is presented through airfoil data tables (c81 files) that are used by comprehensive rotor analysis codes such as CAMRADII, or the mid-fidelity CFD solver RotCFD. Finally, the rotor performance is compared with experimental data from the 25ft Space Simulator at the NASA Jet Propulsion Laboratory (JPL) and shows good correlation for the rotor Figure of Merit over the available thrust range.

Model↗

Silent and Efficient Supersonic Bi-Directional Flying Wing

The supersonic bi-directional (SBiDir) flying wing (FW) concept has a great potential to achieve low sonic boom with high supersonic aerodynamic performance due to removal of performance conflict between high speed and low speed by rotating goo in flight. This NIAC Phase 1 research has achieved three objectives: 2) prove the concept based on simulation that it can achieve very low boom with smooth Sine wave ground over-pressure signature and excellent aerodynamic efficiency; 3) conduct trade study to correlate the geometric parameters with sonic boom and aerodynamic performance for further automated design optimization in Phase II. The design methodology developed in Phase I includes three parts: 1) an advanced geometry model, which can vary airfoil meanline angle distribution to control the expansion and shock waves on the airplane surface to mitigate sonic boom and improve aerodynamic efficiency. 2) a validated CFD procedure to resolve near field flow with accurate shock strength. The sonic boom propagation from near field to far field ground is simulated by NASA NF Boom code. The surface friction drag prediction is based on fiat plate correlation adopted by Seebass and supported by the experimental study of Winter and Smith, which is on the conservative side and is more reliable than CFD RANS simulation. 3) a mission analysis tool based on Corke's model that provides design requirements and constraints of supersonic airplanes for range, payload, volume, size, weight, etc. The design mission target is a supersonic transport with cruise Mach number 1.6, 100 passengers, and 4000nm range. The trade study has several very important findings: 1) The far field ground sonic boom signature is directly related to the smoothness of the flow on the airplane surface. The meanline angle distribution is a very effective control methodology to mitigate surface shock and expansion wave strength, and mitigating compression wave coalescing by achieving smooth loading distribution chord-wise. Compared with a linear meanline angle distribution, a design using nonlinear and non-monotonic meanline angle distribution is able to reduce the sonic boom ground loudness by over 20dBP1. The design achieves sonic boom ground loudness less than 70dBP1 and aerodynamic dynamic efficiency 1/D of 8.4. 2) Decreasing sweep angle within the Mach cone will increase 1/D as well as sonic boom. A design with variable sweep from 84° at the very leading edge to 68° at the tip achieves an extraordinarily high 1/D of 10.4 at Mach number 1.6 due to the low wave drag. If no sonic boom constraint is attached, SBiDir-FW concept still has a lot of room to increase the 1/D. 3) The round leading edge and trailing edge under high sweep angle are beneficial to improve aerodynamic performance, sonic boom, and to increase volume of the airplane. 4) Subsonic performance is benefited greatly from the high slenderness of supersonic configuration after rotating goo. A design with excellent supersonic aspect ratio of 0.44, 1/D of 8.g, gives an extraordinary subsonic aspect ration of 10 and 1/D of 1g.7. Two configurations are designed in details to install internal seats, landing gears, and engine installation to demonstrate the feasibility of SBiDir-FW configuration to accommodate all the required volume for realistic airplane. Here we emphasize that the qualitative findings in Phase I are very encouraging, more important than the quantitative results. Qualitative findings give the understanding of physics and provide the path to achieve the ultimate high performance design. The promising quantitative results achieved in Phase I need to be confirmed by wind tunnel testing in Phase II and ultimately proved by flight test. The other important step forward will be made to study the rotation transition from both CFD unsteady simulation and wind tunnel testing.

Zha, Gecheng↗

Low Reynolds Number Airfoil Evaluation for the Mars Helicopter Rotor

The present research is aimed at providing a performance model for the Mars Helicopter (MH), to understand the complexity of the flow, and future regions of improvement. The Martian atmosphere's low density and the MH's relatively small rotor result in very low chord-based Reynolds number flows, Rec = O(10(exp 3)-10(exp 4)). The low density and subcritical Reynolds number reduce the lifting force and lifting efficiency, respectively. The high drag coefficients in subcritical flow, especially for thicker sections, are attributed to laminar separation from the rear of the airfoil. The goal is to generate a performance model for the MH rotor for a free wake analysis, since the computational budget for a complete Navier-Stokes solution for a rotating body-fitted rotor is substantial. In this study, a RANS-based approach is used to generate the airfoil deck using OVERFLOW with stitched experimental data for very high angles of attack. The model is presented through airfoil data tables (C81 files) that are used by comprehensive rotor analysis codes such as CAMRADII, or the mid-fidelity CFD solver RotCFD. These codes have proven to provide accurate performance predictions for all rotor operations at only a fraction of the computational expense of three- dimensional body-fitted viscous grids.

Koning, Witold J. K.↗

Time Series Analysis in the Search for Other Worlds Through Transit Photometry

The Kepler Mission launched in June 2009 to commence NASA's first mission to search for potentially habitable, Earth-size planets orbiting Sun-like stars. Kepler discovered explanets via the transit method: searching for minute (100 ppm) drops in brightness lasting 1 - 13 hours corresponding to occasions where the planet crosses the face of its host star from Kepler's point of view. The exquisite precision required to carry out the Kepler mission (20 ppm in 6.5 hours) pushed astronomical time series analysis to the limits, and motivated the development of novel algorithmic approaches. Transit signatures of rocky planets are often dwarfed by the intrinsic stellar variability, which is not white noise, and often is non-stationary, and by instrumental systematic effects, which can include transients and electronic artifacts. Surmounting this challenging regime of weak, temporally compact, periodic signals in observation noise with strong systematics and other sources of variability motivated the development of 1) an overcomplete, non-decimated, wavelet-based matched filter to jointly estimate the properties of the non-stationary, non-white observation noise process, and 2) a multi-scale, maximum a posteriori (msMAP) approach to identifying and removing instrumental systematic effects. After over nine years of observations, the Kepler spacecraft finally ran out of fuel in November 2018, ending its data collection activities. Over 2300 planets were discovered by Kepler in its primary mission, and over 355 have been discovered by K2, the repurposed mission that followed Kepler's primary mission after the loss of a second reaction wheel in May 2013. We have ported the Kepler science pipeline for the Transiting Exoplanet Survey Satellite (TESS) Mission, which began science observations in July 2019, and report initial results and performance of the modified science pipeline.The Kepler and TESS Missions are supported by NASA's Science Mission Directorate.

transit surveys↗

Overflow Juncture Flow Computations Compared with Experimental Data

NASA’s Transformational Tools and Technologies Project (T(cu.) is supporting a substantial effort to investigate the formation and origin of separation bubbles found on wing-body juncture zones: the Juncture Flow experiment. The first phase of the Juncture Flow experiment, performed in NASA Langley’s 14- by 22-Foot Subsonic Tunnel, has been completed. This paper documents the CFD analysis done in conjunction with the experiment. Comparisons between CFD simulations and wind tunnel experimental results will be shown. Oil flow results, surface pressure cuts, velocity profiles, and Reynolds stress profiles will be compared. Preliminary results analyzing the effect of grid resolution, wind tunnel walls, and turbulence models on the above data will be presented. The results are not meant to be a validation study, but more as an evaluation of the current status of Reynolds averaged Navier Stokes (RANS) CFD simulations.

Lee, Henry C.↗

Evaluation of the Impacts of Biomass Burning Aerosols on the NASA GEOS Sub-Seasonal Climate Forecasts

Emission sources of trace gases and aerosol particles in the South American (SA)and African (Af) continents have a strong seasonal and space variability associated with the extensive vegetation fires activities. In both continents, during the austral winter, the fires affect mainly tropical forest and savannah-type biomes and are mostly associated with deforestation and agricultural/pasture land management. Smoke aerosol particles, on average, contribute to at least 90% of the total aerosol optical depth (AOD) in the visible spectrum in the case of the South America regional smoke. Smoke aerosols also act as cloud condensation nuclei affecting cloud microphysics properties and therefore, changing the radiation budget, hydrological cycle and global circulation patterns over disturbed areas (Kaufman, 1995; Rosenfeld, 1999; Andreae,et al., 2004; Koren et al., 2004, Zhang, 2008; Ott et al., 2010; Randles et al., 2013). This study aims to evaluate and quantify the impact of including a comprehensive emission field of biomass burning aerosol on the performance of a seasonal climate forecast system, not only regarding the AOD itself but mainly on the meteorological state variable (e.g., precipitation and temperature). To address the questions put above, we designed two numerical experiments: 1- named"AERO_CTL" which applies the Quick Fire Emissions Dataset (QFED) emissions estimated with intra-diurnal variation (hereafter, BBE), and 2- named "AERO_CLM" where the sourcee mission is based on a climatology of the QFED emissions, with only monthly variation(hereafter, BBCLIM). Hindcast simulations were produced using the Goddard Earth ObservingSystem global circulation model, version 5, sub-seasonal to seasonal (GEOS5-S2S) system with a nominal spatial resolution of 56km (Rienecker et al., 2008). In both experiments, the aerosol feedbacks from cloud developments and radiation interactions were accounted. The two experiments consisted of 4 members each and ran from June to November spanning over the years 2000 to 2015. Model performance was evaluated by calculating statistical metrics on the mean area of SA and Af. Our results demonstrated that the skill model in predicting AOD is significantly improve when BBE source emission is applied over SA, but not over the Afcontinent. Over SA, the correlation between the AERO_CTL model configuration and MERRA-2 is 0.93 (R2= 0.86, RMS=0.02, BIAS=0.01), while the AERO_CLM model presents a value of0.81 (R2= 0.65, RMS=0.04, BIAS=0.06). However, the AERO_CTL experiment better represents the inter-annual variability of the AOS in both regions. The gain of the skill in predicting the AOD by the AERO_CTL experiment is also seen in some meteorological variables. We observed an increase in the model skill in predicting the 2-meter temperature and precipitation of up to 0.3 for the AERO_CTL experiment in comparison to the AERO_CLM. AERO_CLM. According to the analyzed hindcast, we inferred that representing the BBE more realistically implies in a significant gain of skills in the seasonal climate forecasting over SA and Af continents.

Aerosol↗