Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Diamond as a high pressure gauge up to 2.7 Mbar

A pressure gauge is a key issue of any high pressure experiment in a diamond anvil cell (DAC). Here we present a method of in situ synthesis of microcrystals of diamond that can be further used as a pressure standard in the course of the same DAC experiment. Calibration curve of the Raman shift versus pressure is extended up to 270 GPa and experimental results are compared with those of ab initio calculations.

36 MATERIALS SCIENCE↗

Raman scattering analysis of silicon dioxide single crystal treated by direct current plasma discharge

Low-k materials such as silicon dioxide (SiO{sub 2}) play an important role in the semiconductor industry. Plasma has become indispensable for advanced materials processing. In this work a treatment of SiO{sub 2} single crystal by direct current plasma discharge is studied in detail. Offline metrology is conducted for silicon dioxide wafers by Raman scattering, energy-dispersive x-ray spectroscopy, and ellipsometry. Broad Raman peak at around 2800 cm{sup -1} is observed for the treated SiO{sub 2} wafers. Effects of plasma treatment on position of this peak are reported in the paper. An analysis of this correlation could be a framework for creating virtual etch rate sensors, which might be of importance in managing plasma etching processes.

36 MATERIALS SCIENCE↗

Intrinsic metastability of orthorhombic HfTiO{sub 4} in thin film hafnia-titania

Orthorhombic (o) HfTiO{sub 4} is crystallized when sputter deposited hafnia-titania nanolaminates with ultrathin layers and bilayer (HfO{sub 2}){sub 0.5}(TiO{sub 2}){sub 0.5} composition are annealed between 573 and 1173 K. However, o-HfTiO{sub 4} demixes after annealing at 1273 K, a result not predicted from bulk thermodynamics. X-ray diffraction and Raman microscopy are used here to study structural changes as o-HfTiO{sub 4} demixes upon long-term annealing at 1273 K into Ti-doped monoclinic HfO{sub 2} and Hf-doped rutile TiO{sub 2}. We conclude that o-HfTiO{sub 4} crystallized at low temperature is intrinsically metastable. A space group symmetry analysis shows that demixing can be accomplished by a continuous phase transition chain.

36 MATERIALS SCIENCE↗

Tuning the electronic coupling in a low-bandgap donor-acceptor copolymer via the placement of side-chains

We present a spectroscopic and theoretical investigation of the effect of the presence and position of hexyl side-chains in the novel low-bandgap alternating donor-acceptor copolymer poly[bis-N,N-(4-octylphenyl)-bis-N,N-phenyl-1, 4-phenylenediamine-alt-5,5'-4',7',-di-2-thienyl-2',1',3'-benzothiadiazole] (T8TBT). We use electronic absorption and Raman spectroscopic measurements supported by calculations of chain conformation, electronic transitions, and Raman modes. Using these tools, we find that sterically demanding side-chain configurations induce twisting in the electronic acceptor unit and reduce the electronic interaction with the donor. This leads to a blue-shifted and weakened (partial) charge-transfer absorption band together with a higher photoluminescence efficiency. On the other hand, sterically relaxed side-chain configurations promote coupling between donor and acceptor units and exhibit enhanced absorption at the expense of luminescence efficiency. The possibility of tuning the donor-acceptor character of conjugated polymers by varying the placement of side-chains has very important ramifications for light emitting diode, Laser, display, and photovoltaic device optimization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Raman scattering in InAs/AlGaAs quantum dot nanostructures

We report on Raman scattering experiments on InAs/Al{sub x}Ga{sub 1-x}As quantum dot heterostructures with 0{<=}x{<=}0.6. The samples were prepared by using molecular beam epitaxy (MBE) and atomic layer MBE for the growth of different layers. For x>0, we detected several lines originating from the Al{sub x}Ga{sub 1-x}As alloy. These can be related to scattering from GaAs-like and AlAs-like phonons with q congruent with 0, and weaker scattering from disorder-activated phonons with q{ne}0. In particular, we identified a line at {approx}250 cm{sup -1} as due to disorder-activated longitudinal optical phonons in the alloy. This conclusion is different than the attribution of this line to scattering from dots and, consequently, we do not recognize the possibility of deriving any information about the actual composition of the dots from an analysis of this line as proposed by other authors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Anomalous temperature-dependency of phonon line widths probed by Raman scattering from {beta}-FeSi{sub 2} thin films

Micro-Raman scattering and its temperature dependencies have been used to investigate lattice dynamic properties of {beta}-FeSi{sub 2} thin films epitaxially grown on Si (111) substrates by sputtering at elevated temperatures. A linear correlation between the blueshift in phonon energies and the lattice expansions in the growth direction of {beta}-FeSi{sub 2} is observed. The shifting rate of the Raman mode at 248 cm{sup -1} (13.6 cm{sup -1}/%) is much larger than that of the mode at 194 cm{sup -1} (8.4 cm{sup -1}/%) due to the involvement of radial bonding vibrations between Fe and Si atoms. Temperature-dependent Raman scattering, which is hitherto unknown for {beta}-FeSi{sub 2}, reveals an extremely small phonon line width broadening in the range of 80-480 K. It is revealed that the broadening in the phonon line widths contributed by phonon-phonon scattering is weaker and is masked by phonon-hole couplings in {beta}-FeSi{sub 2}, while the effect of phonon-hole coupling on phonon line width broadening is saturated at the studied temperatures due to the high impurity densities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of O{sub 2}{sup +}, H{sub 2}{sup +}+ O{sub 2}{sup +}, and N{sub 2}{sup +}+ O{sub 2}{sup +} ion-beam irradiation on the field emission properties of carbon nanotubes

The effect of O{sub 2}{sup +}, H{sub 2}{sup +}+ O{sub 2}{sup +}, and N{sub 2}{sup +}+ O{sub 2}{sup +} ion-beam irradiation of carbon nanotubes (CNTs) films on the chemical and electronic properties of the material is reported. The CNTs were grown by the chemical vapor deposition technique (CVD) on silicon TiN coated substrates previously decorated with Ni particles. The Ni decoration and TiN coating were successively deposited by ion-beam assisted deposition (IBAD) and afterwards the nanotubes were grown. The whole deposition procedure was performed in situ as well as the study of the effect of ion-beam irradiation on the CNTs by x-ray photoelectron spectroscopy (XPS). Raman scattering, field-effect emission gun scanning electron microscopy (FEG-SEM), and field emission (FE) measurements were performed ex situ. The experimental data show that: (a) the presence of either H{sub 2}{sup +} or N{sub 2}{sup +} ions in the irradiation beam determines the oxygen concentration remaining in the samples as well as the studied structural characteristics; (b) due to the experimental conditions used in the study, no morphological changes have been observed after irradiation of the CNTs; (c) the FE experiments indicate that the electron emission from the CNTs follows the Fowler-Nordheim model, and it is dependent on the oxygen concentration remaining in the samples; and (d) in association with FE results, the XPS data suggest that the formation of terminal quinone groups decreases the CNTs work function of the material.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and optical properties of rare earth-doped (Ba{sub 0.77}Ca{sub 0.23}){sub 1-x}(Sm, Nd, Pr, Yb){sub x}TiO{sub 3}

The structural, dielectric, and vibrational properties of pure and rare earth (RE)-doped Ba{sub 0.77}Ca{sub 0.23}TiO{sub 3} (BCT23; RE = Nd, Sm, Pr, Yb) ceramics obtained via solid-state reaction were investigated. The pure and RE-doped BCT23 ceramics sintered at 1450 deg. C in air for 4 h showed a dense microstructure in all ceramics. The use of RE ions as dopants introduced lattice-parameter changes that manifested in the reduction of the volume of the unit cell. RE-doped BCT23 samples exhibit a more homogenous microstructure due to the absence of a Ti-rich phase in the grain boundaries as demonstrated by scanning electron microscopy imaging. The incorporation of REs led to perturbations of the local symmetry of TiO{sub 6} octahedra and the creation of a new Raman mode. The results of Raman scattering measurements indicated that the Curie temperature of the ferroelectric phase transition depends on the RE ion and ion content, with the Curie temperature shifting toward lower values as the RE content increases, with the exception of Yb{sup 3+} doping, which did not affect the ferroelectric phase transition temperature. The phase transition behavior is explained using the standard soft mode model. Electronic paramagnetic resonance measurements showed the existence of Ti vacancies in the structure of RE-doped BCT23. Defects are created via charge compensation mechanisms due to the incorporation of elements with a different valence state relative to the ions of the pure BCT23 host. It is concluded that the Ti vacancies are responsible for the activation of the Raman mode at 840 cm{sup -1}, which is in agreement with lattice dynamics calculations.

36 MATERIALS SCIENCE↗

Femtosecond laser crystallization of amorphous Ge

Ultrafast crystallization of amorphous germanium (a-Ge) in ambient has been studied. Plasma enhanced chemical vapor deposition grown a-Ge was irradiated with single femtosecond laser pulses of various durations with a range of fluences from below melting to above ablation threshold. Extensive use of Raman scattering has been employed to determine post solidification features aided by scanning electron microscopy and atomic force microscopy measurements. Linewidth of the Ge optic phonon at 300 cm{sup -1} as a function of laser fluence provides a signature for the crystallization of a-Ge. Various crystallization regimes including nanostructures in the form of nanospheres have been identified.

36 MATERIALS SCIENCE↗

Low-temperature synthesis of graphene on nickel foil by microwave plasma chemical vapor deposition

Microwave plasma chemical vapor deposition (MPCVD) was employed to synthesize high quality centimeter scale graphene film at low temperatures. Monolayer graphene was obtained by varying the gas mixing ratio of hydrogen and methane to 80:1. Using advantages of MPCVD, the synthesis temperature was decreased from 750 deg. C down to 450 deg. C. Optical microscopy and Raman mapping images exhibited that a large area monolayer graphene was synthesized regardless of the temperatures. Since the overall transparency of 89% and low sheet resistances ranging from 590 to 1855 {Omega}/sq of graphene films were achieved at considerably low synthesis temperatures, MPCVD can be adopted in manufacturing future large-area electronic devices based on graphene film.

36 MATERIALS SCIENCE↗

Raman study of strained Ge{sub 1-x}Sn{sub x} alloys

The Ge-Ge longitudinal optical Raman peak has been measured in strained Ge{sub 1-x}Sn{sub x} alloy layers grown on top of relaxed In{sub y}Ga{sub 1-y}As buffer layers on GaAs substrates by molecular beam epitaxy. The experimental result shows that the peak frequency shift increases linearly from the value for bulk Ge with the Sn fraction x and the strain {epsilon}, {Delta}{omega} {omega}- {omega}{sub Ge} = ax + b{epsilon}. In these experiments alloy and strain contributions are decoupled and measured separately, and a and b are determined to be a = - 82 {+-} 4 cm{sup -1} and b = - 563 {+-} 34 cm{sup -1}, over the entire composition and strain range investigated.

36 MATERIALS SCIENCE↗

Forward Raman compression via photonic band gap in metals or warm dense matter

The group velocity of a light pulse in photonic band gap material could considerably deviate from the speed of light in vacuum. A forward stoke and a pump pulse of different speeds would enable the Raman compression in metals or the warm dense matter. A small window of the parameter regime, where the compression is feasible via the forward Raman scattering, is identified.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optoelectronic properties of Mg{sub 2}Si semiconducting layers with high absorption coefficients

In an attempt to develop a low-cost material for solar cell devices, polycrystalline magnesium silicide (poly-Mg{sub 2}Si) semiconducting layers have been prepared by applying rf magnetron sputtering using a Mg{sub 2}Si target. The optimum substrate temperature for the poly-Mg{sub 2}Si growth was found to be T{sub s} = 200 deg. C; the film deposition at higher temperatures leads to desorption of Mg atoms from the growing surface, while the amorphous phase formation occurs at room temperature. The poly-Mg{sub 2}Si layer deposited at T{sub s} = 200 deg. C shows the (111) preferential orientation with a uniform grain size of {approx}50 nm. The dielectric function of the poly-Mg{sub 2}Si layer has been determined accurately by spectroscopic ellipsometry. From the analysis, quite high absorption coefficients and an indirect gap of 0.77 eV in the poly-Mg{sub 2}Si layer have been confirmed. The above poly-Mg{sub 2}Si layer shows clear photoconductivity and can be applied as a narrow-gap bottom layer in multi-junction solar cell devices.

36 MATERIALS SCIENCE↗

Structural properties of Bi{sub 2}Te{sub 3} and Bi{sub 2}Se{sub 3} topological insulators grown by molecular beam epitaxy on GaAs(001) substrates

Thin films of Bi{sub 2}Te{sub 3} and Bi{sub 2}Se{sub 3} have been grown on deoxidized GaAs(001) substrates using molecular beam epitaxy. Cross-sectional transmission electron microscopy established the highly parallel nature of the Te(Se)-Bi-Te(Se)-Bi-Te(Se) quintuple layers deposited on the slightly wavy GaAs substrate surface and the different crystal symmetries of the two materials. Raman mapping confirmed the presence of the strong characteristic peaks reported previously for these materials in bulk form. The overall quality of these films reveals the potential of combining topological insulators with ferromagnetic semiconductors for future applications.

36 MATERIALS SCIENCE↗

Quantifying pulsed laser induced damage to graphene

As an emerging optical material, graphene's ultrafast dynamics are often probed using pulsed lasers yet the region in which optical damage takes place is largely uncharted. Here, femtosecond laser pulses induced localized damage in single-layer graphene on sapphire. Raman spatial mapping, SEM, and AFM microscopy quantified the damage. The resulting size of the damaged area has a linear correlation with the optical fluence. These results demonstrate local modification of sp{sup 2}-carbon bonding structures with optical pulse fluences as low as 14 mJ/cm{sup 2}, an order-of-magnitude lower than measured and theoretical ablation thresholds.

36 MATERIALS SCIENCE↗

X-ray radiation effects in multilayer epitaxial graphene

We characterize multilayer graphene grown on C-face SiC before and after exposure to a total ionizing dose of 12 Mrad(SiO{sub 2}) using a 10 keV x-ray source. While we observe the partial peeling of the top graphene layers and the appearance of a modest Raman D-peak, we find that the electrical characteristics (mobility, sheet resistivity, free carrier concentration) of the material are mostly unaffected by radiation exposure. Combined with x-ray photoelectron spectroscopy data showing numerous carbon-oxygen bonds after irradiation, we conclude that the primary damage mechanism is through surface etching from reactive oxygen species created by the x-rays.

36 MATERIALS SCIENCE↗

Two-domain formation during the epitaxial growth of GaN (0001) on c-plane Al{sub 2}O{sub 3} (0001) by high power impulse magnetron sputtering

We study the effect of high power pulses in reactive magnetron sputter epitaxy on the structural properties of GaN (0001) thin films grown directly on Al{sub 2}O{sub 3} (0001) substrates. The epilayers are grown by sputtering from a liquid Ga target, using a high power impulse magnetron sputtering power supply in a mixed N{sub 2}/Ar discharge. X-ray diffraction, micro-Raman, micro-photoluminescence, and transmission electron microscopy investigations show the formation of two distinct types of domains. One almost fully relaxed domain exhibits superior structural and optical properties as evidenced by rocking curves with a full width at half maximum of 885 arc sec and a low temperature band edge luminescence at 3.47 eV with the full width at half maximum of 10 meV. The other domain exhibits a 14 times higher isotropic strain component, which is due to the higher densities of the point and extended defects, resulting from the ion bombardment during growth. Voids form at the domain boundaries. Mechanisms for the formation of differently strained domains, along with voids during the epitaxial growth of GaN are discussed.

36 MATERIALS SCIENCE↗

Nanoscale mechanically induced structural and electrical changes in Ge{sub 2}Sb{sub 2}Te{sub 5} films

We demonstrate that the microstructure and electrical properties of Ge{sub 2}Sb{sub 2}Te{sub 5} films can be changed by a nanoscale mechanical process. Nanoscratching is used to define modified areas onto an as-deposited crystalline Ge{sub 2}Sb{sub 2}Te{sub 5} film. Scanning tunneling microscopy measurements show that the modified areas have a very low electrical conductivity. Micro-Raman measurements indicate that the mechanically induced microstructural changes are consistent with a phase transformation from crystalline to amorphous, which can be reversed by laser irradiation.

36 MATERIALS SCIENCE↗