Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Raman Microscopy Analysis of Wyoming CarbonSAFE Pilot Well Thin Sections for Mineralogy and Organic Matter Characterization

Scanning confocal Raman microspectroscopy (RMS) was used to analyze thin sections for inorganic mineral content and for evaluation of organic material (OM). Thin sections were selected from a stratigraphic test well core in the Powder River Basin, Wyoming under the Wyoming CarbonSAFE project. The well was analyzed with a variety of rock and fluid characterization techniques to determine the feasibility of a commercial-scale CO2 storage site. RMS complements other analyses, including traditional petrography, SEM, porosity and permeability, and XRD For this aspect of the study, RMS is especially important in the evaluation of OM in sealing lithologies. At prospective geologic CO2 storage sites, it is imperative to assess the unconventional oil and gas potential of seals to ensure that any future development would not compromise the integrity of the seals. Whole-slide mineralogical surveys were performed on thin sections from various shale and sandstone formations. Surveys were analyzed with Direct Classical Least Squares to identify and quantify minerals. The location and concentration of minerals was color-coded and overlaid on optical images for visualization of the distribution of minerals. Dense hyperspectral Raman mapping of OM was performed on five thin sections. Eleven spectral parameters diagnostic of organic type and thermal maturity were used to train a Partial Least Squares (PLS) calibration against a set of artificially matured samples spanning the pre- to mid-oil window. The PLS was applied to the study set and a post-mature set. Additionally, the PLS was applied to each point in hyperspectral maps for visualization of trends in maturity across sample sets and discrimination of organic matter types within a given map. In inorganic surveys on thin sections, a total of 14 unique inorganic minerals were identified in Raman spectra including quartz, dolomite, calcite, hematite and anhydrite. Shale thin sections tended to be dominated by organic material. OM was often observed mixed with inorganic minerals. Sand- and mudstones were dominated by inorganic minerals. The PLS extrapolated the post-mature set to reflectances >1.2%. The study set ranged from very immature to postmature in the median of map fit-peak parameters. However, point maturity maps indicate that matrix OM in all study samples is immature and that discreet organic particles selected for mapping, which may be inertinites, bias medians towards more-mature. The work demonstrates the capabilities of RMS to perform both whole-slide mineralogy and OM analysis with applications to formation evaluation in oil & gas, carbon sequestration and mining. Here, analysis of sealing formations in the well indicates high levels of immature organic matter that would not be a viable target for future oil production that could compromise the CO2 storage site. The work brings together diverse disciplines from geology and petrography to analytical chemistry, big data and microscopy.

Myers, Grant↗

Preparation and mechanism of nanometer Al{sub 5}O{sub 6}N via shock wave plasma technique

Cubic Al{sub 5}O{sub 6}N nanocrystals were successfully synthesized via a novel strategy called shock wave plasma technique, using trinitrotoluene (TNT) and aluminum powder as raw materials and water as protection medium. The precursor including carbon and Al{sub 5}O{sub 6}N was engendered firstly during the detonation of compound dynamite, and then the pure Al{sub 5}O{sub 6}N nanoparticles were obtained when the carbon was removed through calcining at high temperature. The precursor and the final as-synthesized Al{sub 5}O{sub 6}N powder were characterized by X-ray diffraction (XRD), Raman spectrum and high-resolution transmission electron microscope (HRTEM), respectively. The calcining temperature schedule of the precursor was decided through DTA/TG analysis. The results indicate that the precursor consists of 37.7% carbon and 62.3 deg. C Al{sub 5}O{sub 6}N. After calcining at 600 deg. C for 1 h, the average diameter of the as-synthesized Al{sub 5}O{sub 6}N nanocrystal is 30-40 nm and the morphology micrograph takes on uniform spherical shape. The lattice parameters are consistent completely with the standard cubic Al{sub 5}O{sub 6}N (JCPDS 48-0686). The well-dispersed Al{sub 5}O{sub 6}N nanocrystals synthesized by shock wave plasma technique can be attributed to the covering of carbon and fast cooling of water medium. A possible reaction mechanism was also proposed preliminarily based on the experimental results.

36 MATERIALS SCIENCE↗

Syntheses, crystal structures and spectroscopic properties of Ag{sub 2}Nb[P{sub 2}S{sub 6}][S{sub 2}] and KAg{sub 2}[PS{sub 4}]

Ag{sub 2}Nb[P{sub 2}S{sub 6}][S{sub 2}] (1) was obtained from the direct solid state reaction of Ag, Nb, P{sub 2}S{sub 5} and S at 500 deg. C. KAg{sub 2}[PS{sub 4}] (2) was prepared from the reaction of K{sub 2}S{sub 3}, Ag, Nd, P{sub 2}S{sub 5} and extra S powder at 700 deg. C. Compound 1 crystallizes in the orthorhombic space group Pnma with a=12.2188(11), b=26.3725(16), c=6.7517(4) A, V=2175.7(3) A{sup 3}, Z=8. Compound 2 crystallizes in the non-centrosymmetric tetragonal space group I4-bar2m with lattice parameters a=6.6471(7), c=8.1693(11) A, V=360.95(7) A{sup 3}, Z=2. The structure of Ag{sub 2}Nb[P{sub 2}S{sub 6}][S{sub 2}] (1) consists of [Nb{sub 2}S{sub 12}], [P{sub 2}S{sub 6}] and new found puckered [Ag{sub 2}S{sub 4}] chains which are along [001] direction. The Nb atoms are located at the center of distorted bicapped trigonal prisms. Two prisms share square face of two [S{sub 2}{sup 2-}] to form one [Nb{sub 2}S{sub 12}] unit, in which Nb-Nb bond is formed. The [Nb{sub 2}S{sub 12}] units share all S{sup 2-} corners with ethane-like [P{sub 2}S{sub 6}] units to form 14-membered rings. The novel puckered [Ag{sub 2}S{sub 4}] chains are composed of distorted [AgS{sub 4}] tetrahedra and [AgS{sub 3}] triangles that share corners with each other. These chains are connected with [P{sub 2}S{sub 6}] units and [Nb{sub 2}S{sub 12}] units to form three-dimensional frame work. The structural skeleton of 2 is built up from [AgS{sub 4}] and [PS{sub 4}] tetrahedra linked by corner-sharing. The three-dimensional anionic framework contains orthogonal, intersecting tunnels directed along [100] and [010]. This compound possesses a compressed chalcopyrite-like structure. The structure is compressed along [001] and results from eight coordination sphere for K{sup +}. Both compounds are characterized with UV/vis diffuse reflectance spectroscopy and compound 1 with IR and Raman spectra. - Graphical abstract: The thiophosphates Ag{sub 2}Nb[P{sub 2}S{sub 6}][S{sub 2}] and KAg{sub 2}[PS{sub 4}] crystallize as three-dimensional networks. A remarkable structural feature of the former compound is a [Ag{sub 2}S{sub 4}] chain composed of [AgS{sub 4}] tetrahedra and [AgS{sub 3}] triangles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Field emission of vertically aligned V{sub 2}O{sub 5} nanowires on an ITO surface prepared with gaseous transport

Growing V{sub 2}O{sub 5} nanowires (NWs) on a conducting glass substrate combines gaseous transport and pyrolytic deposition of vanadium polyoxometalate anions, and yields vertically aligned vanadium-oxide nanowires. Scanning electron and transmission electron microscopy, selected-area electron diffraction, Raman spectra and powder X-ray analyses indicate that V{sub 2}O{sub 5} nanowires as synthesized were single-crystalline and grew anisotropically among direction [010]. NH{sub 2}OH.HCl served not only as a reducing agent to produce vanadium polyoxometalate clusters but also as a source of NH{sub 3} gas to facilitate the vapor pyrolysis and deposition. The optical properties of V{sub 2}O{sub 5} nanowires exhibit a character dependent on structure. Field emission (FE) measurements show a small turn-on field voltage approx8.3 V/{mu}m, maximum current density 1.8 mA/cm{sup 2}, and a linear Fowler-Nordheim behavior. - Graphical abstract: Growing V{sub 2}O{sub 5} nanowires on a conducting glass substrate combines gaseous transport and pyrolytic deposition of vanadium polyoxometalate anions, and yields vertically aligned vanadium-oxide nanowires.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Quantitative Analysis of Spectral Interference of Spontaneous Raman Scattering in High-Pressure Fuel-Rich H2-Air Combustion

We present a theoretical study of the spectral interferences in the spontaneous Raman scattering spectra of major combustion products in 30-atm fuel-rich hydrogen-air flames. An effective methodology is introduced to choose an appropriate line-shape model for simulating Raman spectra in high-pressure combustion environments. The Voigt profile with the additive approximation assumption was found to provide a reasonable model of the spectral line shape for the present analysis. The rotational/vibrational Raman spectra of H2, N2, and H2O were calculated using an anharmonic-oscillator model using the latest collisional broadening coefficients. The calculated spectra were validated with data obtained in a 10-atm fuel-rich H2-air flame and showed excellent agreement. Our quantitative spectral analysis for equivalence ratios ranging from 1.5 to 5.0 revealed substantial amounts of spectral cross-talk between the rotational H2 lines and the N2 O-/Q-branch; and between the vibrational H2O(0,3) line and the vibrational H2O spectrum. We also address the temperature dependence of the spectral cross-talk and extend our analysis to include a cross-talk compensation technique that removes the nterference arising from the H2 Raman spectra onto the N2, or H2O spectra.

Kojima, Jun↗

Ferroelectric phase transitions in three-component short-period superlattices studied by ultraviolet Raman spectroscopy

Vibrational spectra of three-component BaTiO{sub 3}/SrTiO{sub 3}/CaTiO{sub 3} short-period superlattices grown by pulsed laser deposition with atomic-layer control have been investigated by ultraviolet Raman spectroscopy. Monitoring the intensity of the first-order phonon peaks in Raman spectra as a function of temperature allowed the determination of the ferroelectric phase transition temperature T{sub c}. Raman spectra indicate that all superlattices remain in the tetragonal ferroelectric phase with out-of-plane polarization in the entire temperature range below T{sub c}. The dependence of T{sub c} on the relative thicknesses of ferroelectric (BaTiO{sub 3}) to nonferroelectric materials (SrTiO{sub 3} and CaTiO{sub 3}) has been studied. The highest T{sub c} was found in superlattices having the largest relative amount of BaTiO{sub 3}, provided that the superlattice maintains its coherency with the substrate. Strain relaxation leads to a significant decrease in the ferroelectric phase transition temperature.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Raman and infrared spectra of plutonium (IV) oxalate and its thermal degradation products

For over 80 years, plutonium dioxide has been routinely produced via thermal decomposition of hydrated plutonium(IV) oxalate. Despite the longstanding utility of this process, the chemical structures of starting materials and intermediates produced during this thermal conversion remain ill-defined. To help resolve this uncertainty, we measured high-resolution Raman and infrared spectra of Pu(C 2 O 4 ) 2 ·6H 2 O that was heated to 25, 100, 220, 250, 350, and 450 °C in air. Our measurements show that Pu(C 2 O 4 ) 2 ·6H 2 O has a rich vibrational spectrum with at least 15 Raman bands between 180 cm -1 and 1900 cm -1 and 9 infrared bands between 800 cm -1 and 4000 cm -1 . As Pu(C 2 O 4 ) 2 ·6H 2 O is heated, water is liberated, and the oxalate ligand decomposes to produce plutonium oxycarbide species. When heated to 350 °C or higher, vibrational spectra are consistent with PuO 2 with some residual carbon-containing species. Full vibrational spectra, powder X-ray diffraction, and scanning electron microscopy measurements of Pu(C 2 O 4 ) 2 ·6H 2 O and its thermal degradation products are presented herein along with approximate assignments for observed spectral bands. These data can be used to validate and potentially improve existing computational models that describe the chemical structure of compounds produced during thermal degradation of plutonium (IV) oxalate. Given the utility of plutonium (IV) oxalate in synthesizing plutonium dioxide, these results are expected to provide value in the fields of nuclear fuel processing, nuclear nonproliferation, and nuclear forensics.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Electron-phonon coupling in the undoped cuprate YBa 2 Cu 3 O 6 estimated from Raman and optical conductivity spectra

We study experimentally the Raman response of the undoped high-T c parent compound YBa 2 Cu 3 O 6 , and give a unified theory of the two-magnon Raman peak and optical conductivity based on the Hubbard-Holstein model with electron-phonon coupling (EPC). The Hubbard model without EPC can qualitatively account for the experimentally observed resonance of the Raman response, but only the Hubbard-Holstein model (i) reproduces the asymmetry of the Raman spectrum, (ii) validates the experimental visibility of the two-magnon peak, and (iii) predicts the correct shape and energy of the lower edge of the charge transfer gap in optical conductivity. A comparison of experiments with the theory gives the EPC strength λ = 0.6. Here, this result convincingly indicates the vital role of EPC in high-T c cuprates, providing a clue to the mechanism of high T c .

2-dimensional systems↗

Raman Spectroscopy: A New Proposal for the Detection of Leukemia Using Blood Samples

The use of Raman spectroscopy to analyze blood biochemistry and hence distinguish between normal and abnormal blood was investigated. The blood samples were obtained from 6 patients who were clinically diagnosed with leukemia and 6 healthy volunteer. The imprint was put under the microscope and several points were chosen for Raman measurement. All spectra were collected at confocal Raman micro-spectroscopy (Renishaw) with NIR 830 nm laser. It is shown that the serum samples from patients with leukemia and from the control group can be discriminated when the multivariate statistical methods of principal component analysis (PCA) and linear discriminated analysis (LDA) is applied to their Raman spectra. The ratios of some band intensities were analyzed and some band ratios were significant and corresponded to proteins, phospholipids, and polysaccharides. In addition, currently the degree of damage to the bone marrow is estimated through biopsies and therefore it is a very procedure painful. The preliminary results suggest that Raman spectroscopy could be a new technique to study the bone marrow using just blood samples.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Effect of 8 MeV electron beam irradiation on the structural and optical properties of CeO{sub 2} nanoparticles

The effect of 8 MeV electron beam irradiation on the structural and optical properties of cerium oxide nanoparticles was investigated. Ceria nanoparticles were synthesized by chemical precipitation method, and characterized by X-ray diffraction, transmission electron microscopy, ultraviolet–visible, photoluminescence and Raman spectroscopy. Ultraviolet–visible absorption spectra, photoluminescence and Raman spectra of beam irradiated samples were modified, and shifted to blue region, which were attributed to quantum size effect. Systematic observations found that nonstoichiometry, defects and size reduction caused by beam irradiation have great influence on optical band gap, blue shift, photoluminescence and Raman band modifications. Moreover, electron beam irradiation is a suitable technique to enhance the structural and optical properties of nanoceria by controlling the particle size, which may lead to potentially useful technological applications. - Highlights: • Investigated effect of beam irradiation on CeO{sub 2} nanoparticles • Beam irradiation caused size reduction and surface modification. • It increases microstrain, decreases d-spacing and broadens XRD peaks. • It also modifies optical band gap, absorption, PL and Raman bands.

36 MATERIALS SCIENCE↗

Structural characterization of ZnCl{sub 2} modified tellurite based glasses

Glass composition 70 TeO{sub 2}-(30-x) BaO – x ZnCl{sub 2}; x = 5, 10, 15, 20 and 25 have been prepared by rapid melt quenching technique under controlled atmospheric conditions. Amorphous nature of the samples was confirmed by x-ray diffractogram. The glass transition temperature (T{sub g}) has been determined using differential scanning calorimetry (DSC) and its value is observed to decrease with increase in ZnCl{sub 2} content. The peaks in the Raman and FTIR spectra have been estimated by deconvolutation of the spectra and each of deconvoluted spectra exhibits several peaks. IR and Raman spectra of the present glass system indicate that TeO{sub 2} exists as TeO{sub 3} trigonal pyramidal (tp), TeO{sub 4} trigonal bipyramidal (tbp) and TeO{sub 6} polyhedra structural units. With increase in zinc halide content, transformation of some of TeO{sub 4} structural units into TeO{sub 3} structural units is observed Increase in TeO{sub 3} structural units shows that non-bridging oxygen contribution increases which confirms the decrease in glass transition temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improved model of optical phonon confinement in silicon nanocrystals

We develop a model for calculating the Raman scattering spectra from phonons confined in for silicon nanocrystals, which is based on the familiar approach taking into account the uncertainty in the quasi-momentum of phonons localized in the nanocrystals. The model is considerably improved by taking into account dispersion of phonons not only in the magnitude of the quasi-momentum, but also in its direction. A significant refinement of the model is also due to the fact that phonon dispersion is calculated using the widely approved Keating model instead of being approximated by empirical expressions as was done in earlier approaches. The calculations based on this model make it possible to determine the sizes of silicon nanocrystals more precisely from analysis of the experimental Raman spectra.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Interaction of optical and interface phonons and their anisotropy in GaAs/AlAs superlattices: Experiment and calculations

The angular anisotropy of interface phonons and their interaction with optical phonons in (001) GaAs/AlAs superlattices are calculated and experimentally studied. Experiments were performed by Raman light scattering in different scattering geometries for phonons with the wave vector directed normally to the superlattice and along its layers. Phonon frequencies were calculated by the extended Born method taking the Coulomb interaction into account in the rigid-ion approximation. Raman scattering spectra were calculated in the Volkenshtein bond-polarizability approximation. Calculations confirmed that the angular anisotropy of phonons observed in experiments appears due to interaction (mixing) of optical phonons, in which atoms are mainly displaced normally to superlattices, with interface phonons (TO-IF modes). In the scattering geometry, when the wave vector lies in the plane of superlattice layers, the mixed TO-IF modes are observed under nonresonance conditions. The Raman spectra for TO-IF modes depend on the mixing of atoms at heteroboundaries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗