Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RADIATION EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

NEAMS-ATF M3 Milestone Report: Literature Review of Modeling of Radiation-Induced Swelling in Fe-Cr-Al Steels

Fe-Cr-Al steels are proposed as accident-tolerant-fuel (ATF) cladding materials in light water reactors due to their excellent oxidation resistance at high temperatures. Currently, the understanding of their performance in reactor environment is still limited. In this review, firstly we reviewed the experimental studies of Fe-Cr-Al based alloys with particular focus on the radiation effects in these alloys. Although limited data are available in literature, several previous and recent experimental studies have shown that Fe-Cr-Al based alloys have very good void swelling resistance at low and moderate irradiation doses but the growth of dislocation loops is very active. Overall, the behavior of radiation damage evolution is similar to that in Fe-Cr ferritic/martensitic alloys. Secondly, we reviewed the rate theory-based modeling methods for modeling the coevolution of voids and dislocation loops in materials under irradiation such as Frenkel pair three-dimensional diffusion model (FP3DM) and cluster dynamics. Finally, we summarized and discussed our review and proposed our future plans for modeling radiation damage in Fe-Cr-Al based alloys.

36 MATERIALS SCIENCE↗

Effects of laser fluence on silicon modification by four-beam laser interference

This paper discusses the effects of laser fluence on silicon modification by four-beam laser interference. In this work, four-beam laser interference was used to pattern single crystal silicon wafers for the fabrication of surface structures, and the number of laser pulses was applied to the process in air. By controlling the parameters of laser irradiation, different shapes of silicon structures were fabricated. The results were obtained with the single laser fluence of 354 mJ/cm{sup 2}, 495 mJ/cm{sup 2}, and 637 mJ/cm{sup 2}, the pulse repetition rate of 10 Hz, the laser exposure pulses of 30, 100, and 300, the laser wavelength of 1064 nm, and the pulse duration of 7–9 ns. The effects of the heat transfer and the radiation of laser interference plasma on silicon wafer surfaces were investigated. The equations of heat flow and radiation effects of laser plasma of interfering patterns in a four-beam laser interference distribution were proposed to describe their impacts on silicon wafer surfaces. The experimental results have shown that the laser fluence has to be properly selected for the fabrication of well-defined surface structures in a four-beam laser interference process. Laser interference patterns can directly fabricate different shape structures for their corresponding applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of radiation of InP cells epitaxially grown on Si and GaAs substrates

The properties of heteroepitaxial InP cells were determined both before and after 10-MeV proton irradiations. Numerical values, obtained for the diffusion and recombination components of the reverse saturation currents, were found to be consistent with the distribution of dislocations. The radiation resistance of the heteroepitaxial cells was significantly greater than that observed for n/p homoepitaxial InP cells. The carrier removal rate, obtained by C-V measurements, was 1800/cm for 10-MeV protons compared with 2.2/cm for 1-MeV electrons. The high carrier removal rate was found to have no significant effect on the cell's series resistance. It was concluded that the heteroepitaxial cell performance is dominated by the high dislocation density attributable to lattice constant mismatch. Although the efficiencies of the present cells are low, the recent achievement of 13.7 percent AM0 efficiencies using a GaAs substrate demonstrates the marked improvement that can be attained using more appropriate transition layers.

Weinberg, I.↗

Distinct Impacts of Aerosols on an Evolving Continental Cloud Complex during the RACORO Field Campaign

In this study, a continental cloud complex, consisting of shallow cumuli, a deep convective cloud (DCC), and stratus, is simulated by a cloud-resolving Weather Research and Forecasting Model to investigate the aerosol microphysical effect (AME) and aerosol radiative effect (ARE) on the various cloud regimes and their transitions during the Department of Energy Routine Atmospheric Radiation Measurement Aerial Facility Clouds with Low Optical Water Depths Optical Radiative Observations (RACORO) campaign. Under an elevated aerosol loading with AME only, a reduced cloudiness for the shallow cumuli and stratus resulted from more droplet evaporation competing with suppressed precipitation, but an enhanced cloudiness for the DCC is attributed to more condensation. With the inclusion of ARE, the shallow cumuli are suppressed owing to the thermodynamic effects of light-absorbing aerosols. The responses of DCC and stratus to aerosols are monotonic with AME only but nonmonotonic with both AME and ARE. The DCC is invigorated because of favorable convection and moisture conditions at night induced by daytime ARE, via the so-called aerosol-enhanced conditional instability mechanism. Finally, the results reveal that the overall aerosol effects on the cloud complex are distinct from the individual cloud types, highlighting that the aerosol–cloud interactions for diverse cloud regimes and their transitions need to be evaluated to assess the regional and global climatic impacts.

54 ENVIRONMENTAL SCIENCES↗

Dependence of the X-Ray Dosimetric Parameters of AgGaS{sub 2x}Se{sub 2–2x} Single Crystals on Their Composition

It is demonstrated that AgGaS{sub 2x}Se{sub 2–2x} single crystals grown by the chemical transport method are characterized by high X-ray conductivity and X-ray sensitivity coefficients at room temperature. The X-ray dosimetric parameters of crystals are compared. For example, the X-ray conductivity coefficient of AgGaS{sub 2} samples varies within the range of 0.22–3.20 min/R at effective radiation hardness V{sub a} = 25–50 keV and dose rate E = 0.75–78.05 R/min. Single-crystalline AgGaSe{sub 2} samples have higher X-ray dosimetric coefficients than AgGaS{sub 2}-based samples. The X-ray conductivity coefficient of AgGaSe{sub 2} varies within the range of 1.2–8.5 min/R at effective radiation hardness V{sub a} = 25–50 keV and dose rate E = 0.75–31.3 R/min. The dose dependences of steady-state X-ray current in AgGaS{sub 2x}Se{sub 2–2x} are determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radiation Beamline Testbeds for the Simulation of Planetary and Spacecraft Environments for Human and Robotic Mission Risk Assessment

The Center for Radiation Engineering and Science for Space Exploration (CRESSE) at Prairie View A&M University, Prairie View, Texas, USA, is establishing an integrated, multi-disciplinary research program on the scientific and engineering challenges faced by NASA and the international space community caused by space radiation. CRESSE focuses on space radiation research directly applicable to astronaut health and safety during future long term, deep space missions, including Martian, lunar, and other planetary body missions beyond low earth orbit. The research approach will consist of experimental and theoretical radiation modeling studies utilizing particle accelerator facilities including: 1. NASA Space Radiation Laboratory (NSRL) at Brookhaven National Laboratory; 2. Proton Synchrotron at Loma Linda University Medical Center; and 3. Los Alamos Neutron Science Center (LANSCE) at Los Alamos National Laboratory. Specifically, CRESSE investigators are designing, developing, and building experimental test beds that simulate the lunar and Martian radiation environments for experiments focused on risk assessment for astronauts and instrumentation. The testbeds have been designated the Bioastronautics Experimental Research Testbeds for Environmental Radiation Nostrum Investigations and Education (BERT and ERNIE). The designs of BERT and ERNIE will allow for a high degree of flexibility and adaptability to modify experimental configurations to simulate planetary surface environments, planetary habitats, and spacecraft interiors. In the nominal configuration, BERT and ERIE will consist of a set of experimental zones that will simulate the planetary atmosphere (Solid CO2 in the case of the Martian surface.), the planetary surface, and sub-surface regions. These experimental zones can be used for dosimetry, shielding, biological, and electronic effects radiation studies in support of space exploration missions. BERT and ERNIE are designed to be compatible with the experimental areas associated with the above facilities. CRESSE has broad expertise in space radiation in the areas of space radiation environment modeling, Monte-Carlo radiation transport modeling, space radiation instrumentation and dosimetry, radiation effects on electronics, and multi-functional composite shielding materials. The BERT and ERNIE testbeds will be utilized in individual and collaborative research incorporating this expertise. The research goal is to maximize the technical readiness level (TRL) of radiation instrumentation for human and robotic missions, optimizing the return value of CRESSE for NASA exploration and international co-operative missions. Outcomes and knowledge from research utilizing BERT and ERNIE will be applied to a variety of scientific and engineering disciplines vital for safe and reliable execution of future space exploration missions, which can be negatively impacted by the space radiation environment. The testbeds will be central to a variety of university educational activities and educational goals of NASA. Specifically, BERT and ERNIE will enhance educational opportunities in science, technology, engineering and mathematics (STEM) disciplines for engineering and science students at PVAMU, a historically black college/university. Preliminary data on prototype testbed configurations, including simulated lunar regolith (JSC-1A stimulant based on Apollo 11 samples), regolith/polyethylene composites, and dry ice, will be presented to demonstrate the usefulness of BERT and ERNIE in radiation beam line experiments.

Wilkins, Richard↗

Assessing Clouds in GFDL's AM4.0 With Different Microphysical Parameterizations Using the Satellite Simulator Package COSP

We evaluate cloud simulations using satellite simulators against multiple observational data sets. These simulators have been run within the Geophysical Fluid Dynamics Laboratory's Atmosphere Model version 4.0 (AM4.0), as well as an alternative configuration where a fully two‐moment Morrison‐Gettelman cloud microphysical parameterization with prognostic precipitation (MG2) is applied, denoted as AM4‐MG2. The modeled cloud spatial distributions, vertical profiles, phase partitioning, cloud‐to‐precipitation transitions, and radiative effects compare reasonably well with satellite observations. Model biases include the under‐prediction of total and low‐level clouds, especially optically thin/intermediate clouds with cloud optical depth of less than 23, but the over‐prediction of thick clouds, indicating “too few, too bright” biases. These biases counteract each other, and give rise to reasonable estimates of cloud radiative effects. The underestimate of low‐level clouds is associated with too early and too frequent drizzle/precipitation formation. The precipitation bias is improved in AM4‐MG2, where the autoconversion scheme initiates the precipitation more realistically. There also exist discrepancies between models and observations for midlevel and high‐level clouds. Additional biases include the underestimate of liquid cloud fraction and the overestimate of ice cloud fraction.

54 ENVIRONMENTAL SCIENCES↗

Variable Refractive Index Effects on Radiation in Semitransparent Scattering Multilayered Regions

A simple set of equations is derived for predicting the temperature distribution and radiative energy flow in a semitransparent layer consisting of an arbitrary number of laminated sublayers that absorb, emit, and scatter radiation. Each sublayer can have a different refractive index and optical thickness. The plane composite region is heated on each exterior side by a different amount of incident radiation. The results are for the limiting case where heat conduction within the layers is very small relative to radiative transfer, and is neglected. The interfaces are assumed diffuse, and all interface reflections are included in the analysis. The thermal behavior is readily calculated from the analytical expressions that are obtained. By using many sublayers, expressions provide the temperature distribution and heat flow for a diffusing medium with a continually varying refractive index, including internal reflection effects caused by refractive index gradients. Temperature and heat flux results are given to show the effect of variations in refractive index and optical thickness through the multilayer laminate.

Siegel, R.↗

Similarity solution to three dimensional boundary layer flow of second grade nanofluid past a stretching surface with thermal radiation and heat source/sink

Development of human society greatly depends upon solar energy. Heat, electricity and water from nature can be obtained through solar power. Sustainable energy generation at present is a critical issue in human society development. Solar energy is regarded one of the best sources of renewable energy. Hence the purpose of present study is to construct a model for radiative effects in three-dimensional of nanofluid. Flow of second grade fluid by an exponentially stretching surface is considered. Thermophoresis and Brownian motion effects are taken into account in presence of heat source/sink and chemical reaction. Results are derived for the dimensionless velocities, temperature and concentration. Graphs are plotted to examine the impacts of physical parameters on the temperature and concentration. Numerical computations are presented to examine the values of skin-friction coefficients, Nusselt and Sherwood numbers. It is observed that the values of skin-friction coefficients are more for larger values of second grade parameter. Moreover the radiative effects on the temperature and concentration are quite reverse.

36 MATERIALS SCIENCE↗

Radiation damage in nanostructured materials

Materials subjected to high dose irradiation by energetic particles often experience severe damage in the form of drastic increase of defect density, and significant degradation of their mechanical and physical properties. Extensive studies on radiation effects in materials in the past few decades show that, although nearly no materials are immune to radiation damage, the approaches of deliberate introduction of certain types of defects in materials before radiation are effective in mitigating radiation damage. Nanostructured materials with abundant internal defects have been extensively investigated for various applications. The field of radiation damage in nanostructured materials is an exciting and rapidly evolving arena, enriched with challenges and opportunities. In this review article, we summarize and analyze the current understandings on the influence of various types of internal defect sinks on reduction of radiation damage in primarily nanostructured metallic materials, and partially on nanoceramic materials. We also point out open questions and future directions that may significantly improve our fundamental understandings on radiation damage in nanomaterials. Finally, the integration of extensive research effort, resources and expertise in various fields may eventually lead to the design of advanced nanomaterials with unprecedented radiation tolerance.

36 MATERIALS SCIENCE↗

Variable Refractive Index Effects on Radiation in Semitransparent Scattering Multilayered Regions

A simple set of equations is derived for predicting the temperature distribution and radiative energy flow in a semitransparent layer consisting of an arbitrary number of laminated sublayers that absorb, emit, and scatter radiation. Each sublayer can have a different refractive index and optical thickness. The plane composite region is heated on each exterior side by a different amount of incident radiation. The results are for the limiting case where heat conduction within the layers is very small relative to radiative transfer, and is neglected. The interfaces are assumed diffuse, and all interface reflections are included in the analysis. The thermal behavior is readily calculated from the analytical expressions that are obtained. By using many sublayers, the analytical expressions provide the temperature distribution and heat flow for a diffusing medium with a continuously varying refractive index, including internal reflection effects caused by refractive index gradients. Temperature and heat flux results are given to show the effect of variations in refractive index and optical thickness through the multilayer laminate.

Siegel, R.↗

Mineral Dust Cycle in the Multiscale Online Nonhydrostatic AtmospheRe CHemistry Model (Monarch) Version 2.0

We present the dust module in the Multiscale Online Non-hydrostatic AtmospheRe CHemistry model (MONARCH) version 2.0, a chemical weather prediction system that can be used for regional and global modeling at a range of resolutions. The representations of dust processes in MONARCH were upgraded with a focus on dust emission (emission parameterizations, entrainment thresholds, considerations of soil moisture and surface cover), lower boundary conditions (roughness, potential dust sources), and dust–radiation interactions. MONARCH now allows modeling of global and regional mineral dust cycles using fundamentally different paradigms, ranging from strongly simplified to physics-based parameterizations. We present a detailed description of these updates along with four global benchmark simulations, which use conceptually different dust emission parameterizations, and we evaluate the simulations against observations of dust optical depth. We determine key dust parameters, such as global annual emission/deposition flux, dust loading, dust optical depth, mass-extinction efficiency, single-scattering albedo, and direct radiative effects. For dust-particle diameters up to 20 µm, the total annual dust emission and deposition fluxes obtained with our four experiments range between about 3500 and 6000 Tg, which largely depend upon differences in the emitted size distribution. Considering ellipsoidal particle shapes and dust refractive indices that account for size-resolved mineralogy, we estimate the global total (longwave and shortwave) dust direct radiative effect (DRE) at the surface to range between about −0.90 and −0.63 W m−2 and at the top of the atmosphere between −0.20 and −0.28 W m−2. Our evaluation demonstrates that MONARCH is able to reproduce key features of the spatiotemporal variability of the global dust cycle with important and insightful differences between the different configurations.

Dust cycle↗

A review of helium–hydrogen synergistic effects in radiation damage observed in fusion energy steels and an interaction model to guide future understanding

Here, under fusion reactor conditions, large quantities of irradiation defects and transmutation gases are produced per unit time by neutrons, resulting in accelerated degradation of structural candidate ferritic (F) and ferritic/martensitic (F/M) steels. Due to the lack of a suitable fusion neutron testing facility, we must rely on high-dose-rate ion-beam experiments and present-day crude modeling estimates. Of particular interest is the possibility of synergistic (positive feedback) effects on materials properties due to the simultaneous action of He, H, and displacement damage (dpa) during operation. In this paper we discuss the state-of-the-art in terms of the experimental understanding of synergistic effects and carry out simulations of triple-species irradiation under ion-beam conditions using first-of-its-kind modeling techniques. Although, state-of-the-art modeling and simulation is not sufficiently well developed to shed light on the experimental uncertainties, we are able to conclude that it is not clear whether synergistic effects, the evidence of which is still not conclusive, will ultimately play a critical role in material performance under fusion energy conditions. We review here some of the evidence for the synergistic effects of hydrogen in the presence of helium and displacement damage, and also include some recent data from our research. While the experimental results to date suggest possible mechanisms for the observed synergistic effects, it is only with more advanced modeling that we can hope to understand the details underlying the experimental observations. By employing modeling and simulation we propose an interaction model that is qualitatively consistent with experimental observations of dpa/He/H irradiation behavior. Our modeling, the results of which should be helpful to researchers going forward, points to gaps and voids in the current understanding of triple ion-beam irradiation effects (displacement damage produced simultaneously with helium and hydrogen implantation) and the synergistic effects of hydrogen.

36 MATERIALS SCIENCE↗

High-resolution planar electron beam induced current in bulk diodes using high-energy electrons

Understanding the impact of high-energy electron radiation on device characteristics remains critical for the expanding use of semiconductor electronics in space-borne applications and other radiation harsh environments. Here in this paper, we report on in situ measurements of high-energy electron radiation effects on the hole diffusion length in low threading dislocation density homoepitaxial bulk n-GaN Schottky diodes using electron beam induced current (EBIC) in high-voltage scanning electron microscopy mode. Despite the large interaction volume in this system, quantitative EBIC imaging is possible due to the sustained collimation of the incident electron beam. This approach enables direct measurement of electron radiation effects without having to thin the specimen. Using a combination of experimental EBIC measurements and Monte Carlo simulations of electron trajectories, we determine a hole diffusion length of 264 ± 11 nm for n-GaN. Irradiation with 200 kV electron beam with an accumulated dose of 24 × 10 16 electrons cm -2 led to an approximate 35% decrease in the minority carrier diffusion length.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Atmospheric effects on radiation measurements

Two essentially distinct regions of the electromagnetic spectrum are discussed: (1) the scattering region in which the radiation energy is provided by the incident solar flux; and (2) the infrared region in which emission by the earth's surface and atmospheric gases supply radiative energy. In each of these spectral regions the atmosphere performs its dual function with respect to a remote sensing measurement of surface properties. The atmosphere acts both as a filter and as a noise generator removing and obscuring sought after information. Nevertheless, with proper application of concepts such as have been considered, it will be possible to remove these unwanted atmospheric effects and to improve identification techniques being developed.

Jurica, G. M.↗

Representing Anthropogenic Dust From Agricultural Sources in E3SMv1: Implementation, Evaluation, and Assessment of the Radiative Forcing

Dust emissions related to anthropogenic activities (i.e., anthropogenic dust) is not represented in most global climate models and its radiative impact remains unassessed. In this study, we develop a new and physically based method to parameterize anthropogenic dust emission from agricultural sources (i.e., agricultural dust, or AD) based on the DOE's Energy Exascale Earth System Model version 1 (E3SMv1). This method relates AD emission to the crop land use fraction in the E3SMv1 land component. Major AD sources simulated by our parameterization include those over Central America, the Sahel, North India, and North China. The annual averaged AD emission with diameter less than 10 μm is 567 Tg yr −1 in present-day (year 2000), which contributes to 13.3% of total dust emission. Model evaluation against satellite and ground-based observations shows that the new parameterization can represent AD emissions and global dust cycle reasonably well. We find that the total dust emission increases by 13.1% (495 Tg yr −1 ) from 1850 to 2000 due to the cropland land use fraction changes without considering the impact from climate changes. This induces a net dust direct effective radiative forcing of −0.041 W m −2 at top of the atmosphere. This dust-induced cooling exceeds 10% of the total anthropogenic aerosol direct effective radiative forcing from 1750 to 2014 estimated by the Intergovernmental Panel on Climate Change Sixth Assessment Report. Our findings indicate an important role of anthropogenic dust in global climate change, which should be included in future climate change assessments.

agricultural dust↗

Quantification of Global Cloud Properties with Use of Spherical Harmonic Functions

Spherical harmonic (SH) expansion is a useful tool to study any variable that has valid values at all latitudes and longitudes. The variable can be quantified as a sum of different spherical harmonic components, which are the spherical harmonic functions multiplied by their expansion coefficients. We find that the SH components of cloud radiative effect (CRE) have correlations with El Niño-Southern Oscillation (ENSO) and the Hadley Circulation (HC). In particular, the expansion degree 2 (l = 2) SH power spectrum component anomaly of CRE is strongly correlated with ENSO. The two dipole patterns appearing in the l = 2 SH component anomaly map can be reasonably explained by a known mechanism of ENSO’s impact on cloud properties. The l = 3 and l = 5 SH power spectrum components are correlated with HC intensity, whereas the l = 6 and l = 8 components are correlated with HC latitudinal widths. In ENSO warm and cold phases, the HC-correlated SH components have opposite anomalies, which suggests the impact of ENSO on HC. This study illustrates that the SH expansion technique provides a different perspective to study the impacts of large-scale atmospheric circulation on global cloud properties and radiative effects.

clouds↗