Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Positioning Resolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Mg II h and k profiles in high-liminosity, late-type stars

Using high-resolution spectroscopic data taken with the Goddard High Resolution Spectrographic (GHRS) aboard the Hubble Space Telescope (HST) and with the International Ultraviolet Expolorer (IUE) satellite, we compare the profiles of the Mg II h and k lines seen in stars with spectral types ranging from early K through mid-M and luminosities from giants to supergiants. For all of these stars the lines are broad emission features with a central absorption. When plotted on a velocity scale the absorption features of the h and k lines agree very well in both shape and position, as do the blue wings of the emission component. The red wings of the emission, however, show a pronounced difference, with the k line wing consistently shifted to the red of the h line wing. At present the reason for this discrepancy is unknown, but we suggest several possibilities, including radiative transfer effects and high-speed stellar winds.

Robinson, R. D.↗
NASA NTRS1995

The detection of a new strong band near 3590 cm(exp -1) (2.79 microns) in the spectrum of Io

A strong absorption band at 3590 +/- 20 cm(exp -1) (2.790 +/- 0.015 microns) has been discovered in the spectrum of Io using the Kuiper Airborne Observatory (KAO). The 2 nu(sub 1) + nu(sub 3) combination mode of solid SO2 falls at this position. Since SO2 is abundant on Io it must contribute to the new band. However, a band due to H2O was also predicted near this frequency in Io's spectrum based on laboratory experiments of H2O:SO2 mixed Io ice analogs which were used to assign the two weak, variable features at 3370 and 3170 cm(exp -1) (2.97 and 3.15 microns) to trace amounts of H2O frozen in solid SO2 on Io. The new band probably originates from both SO2 and H2O. Unfortunately, the spectral resolution of the data is insufficient to settle the issue of whether or not there are two resolvable components.

Salama, F.↗
NASA NTRS1995

Centroid Detector Assembly for the AXAF-I Alignment Test System

The High Resolution Mirror Assembly (HRMA) of the Advanced X-ray Astrophysics Facility (imaging) (AXAF-I) consists of four nested paraboloids and four nested hyperboloids, all of meter-class size, and all of which are to be assembled and aligned in a special 15 meter tower at Eastman Kodak Company in Rochester, NY. The goals of the alignment are (1) to make the images of the four telescopes coincident; (2) to remove coma from each image individually; and (3) to control and determine the final position of the composite focus. This will be accomplished by the HRMA Aligment Test System (HATS) which is essentially a scanning Hartmann test system. The scanning laser source and the focal plane of the HATS are part of the Centroid Detector Assembly (CDA) which also includes processing electronics and software. In this paper we discuss the design and the measured performance of the CDA.

Glenn, Paul↗
NASA NTRS2009

Fabricating Radial Groove Gratings Using Projection Photolithography

Projection photolithography has been used as a fabrication method for radial grove gratings. Use of photolithographic method for diffraction grating fabrication represents the most significant breakthrough in grating technology in the last 60 years, since the introduction of holographic written gratings. Unlike traditional methods utilized for grating fabrication, this method has the advantage of producing complex diffractive groove contours that can be designed at pixel-by-pixel level, with pixel size currently at the level of 45 45 nm. Typical placement accuracy of the grating pixels is 10 nm over 30 nm. It is far superior to holographic, mechanically ruled or direct e-beam written gratings and results in high spatial coherence and low spectral cross-talk. Due to the smooth surface produced by reactive ion etch, such gratings have a low level of randomly scattered light. Also, due to high fidelity and good surface roughness, this method is ideally suited for fabrication of radial groove gratings. The projection mask is created using a laser writer. A single crystal silicon wafer is coated with photoresist, and then the projection mask, with its layer of photoresist, is exposed for patterning in a stepper or scanner. To develop the photoresist, the fabricator either removes the exposed areas (positive resist) of the unexposed areas (negative resist). Next, the patterned and developed photoresist silicon substrate is subjected to reactive ion etching. After this step, the substrate is cleaned. The projection mask is fabricated according to electronic design files that may be generated in GDS file format using any suitable CAD (computer-aided design) or other software program. Radial groove gratings in off-axis grazing angle of incidence mount are of special interest for x-ray spectroscopy, as they allow achieving higher spectral resolution for the same grating area and have lower alignment tolerances than traditional in-plane grating scheme. This is especially critical for NASA Constellation- X project that will utilize hundreds of gratings all of which need to be precisely aligned for x-ray observation of space.

Iazikov, Dmitri↗
NASA NTRS2011

Handbook of X-Ray Astronomy

X-ray astronomy was born in the aftermath of World War II as military rockets were repurposed to lift radiation detectors above the atmosphere for a few minutes at a time. These early flights detected and studied X-ray emission from the Solar corona. The first sources beyond the Solar System were detected during a rocket flight in 1962 by a team headed by Riccardo Giaccom at American Science and Engineering, a company founded by physicists from MIT. The rocket used Geiger counters with a system designed to reduce non-X-ray backgrounds and collimators limiting the region of sky seen by the counters. As the rocket spun, the field of view (FOV) happened to pass over what was later found to be the brightest non-Solar X-ray source; later designated See X-1. It also detected a uniform background glow which could not be resolved into individual sources. A follow-up campaign using X-ray detectors with better spatial resolution and optical telescopes identified See X-1 as an interacting binary with a compact (neutron star) primary. This success led to further suborbital rocket flights by a number of groups. More X-ray binaries were discovered, as well as X-ray emission from supernova remnants, the radio galaxies M87 and Cygnus-A, and the Coma cluster. Detectors were improved and Geiger counters were replaced by proportional counters, which provided information about energy spectra of the sources. A constant challenge was determining precise positions of sources as only collimators were available.

Arnaud, Keith A.↗
NASA NTRS2012

Subaru Imaging of Asymmetric Features in a Transitional Disk in Upper Scorpius

We report high-resolution (0.07 arcsec) near-infrared polarized intensity images of the circumstellar disk around the star 2MASS J16042165.2130284 obtained with HiCIAO mounted on the Subaru 8.2 m telescope. We present our H-band data, which clearly exhibit a resolved, face-on disk with a large inner hole for the first time at infrared wavelengths. We detect the centrosymmetric polarization pattern in the circumstellar material as has been observed in other disks. Elliptical fitting gives the semi-major axis, semi-minor axis, and position angle (P.A.) of the disk as 63 AU, 62 AU, and -14deg, respectively. The disk is asymmetric, with one dip located at P.A.s of approx. 85deg. Our observed disk size agrees well with a previous study of dust and CO emission at submillimeter wavelength with Submillimeter Array. Hence, the near-infrared light is interpreted as scattered light reflected from the inner edge of the disk. Our observations also detect an elongated arc (50 AU) extending over the disk inner hole. It emanates at the inner edge of the western side of the disk, extending inward first, then curving to the northeast. We discuss the possibility that the inner hole, the dip, and the arc that we have observed may be related to the existence of unseen bodies within the disk.

Mayama, S.↗
NASA NTRSDate not supplied

Monocular Ranging for Small Unmanned Aerial Systems in the Far-Field

Recent proliferation of small Unmanned Aerial Systems (sUAS) applications requires onboard collision avoidance systems to mitigate the risk of collision with non-cooperative aircraft and manned aircraft, which may not see sUAS in time to perform an avoidance maneuver. An attractive avenue for onboard collision avoidance is the utilization of machine vision cameras due to their low size, weight and power (SWaP) requirements. In this paper, we characterize the range performance of a machine vision system developed in-house and mounted onto an sUAS. The technique was designed to estimate the performance of a sense-and-avoid system to ensure that the sensing components meet the well-clear requirements for the chosen platform and avoidance strategy. Experimental flight-test data was acquired from test-flights flown along multiple collision geometries for two intruders: a general Aviation (GA) aircraft and a fixed-wing sUAS. The ownship and both intruders were instrumented with inertial navigation systems (INS) recording position and attitude information. The range at first detection, 𝑹𝟎, was extracted from in-flight imagery of head-on collision course geometry synchronized with INS data from both aircraft and ground-truth values extracted from the raw imagery. This initial detection distance, 𝑹𝟎, scales with atmospheric attenuation. Therefore, under clear sky conditions, the derived 𝑹𝟎 value represents the upper bound on the detection range achievable by the test configuration of the detector. Results indicate that the maximum initial detection distance for a 4k resolution action camera fitted with a 41º Field of View (FOV) lens is 2.763 ± 0.037 km for a GA aircraft and 0.881 ± 0.061 km for a fixed-wing sUAS, respectively. The in results this study suggest that a vision-based detect and track system may be analyzed using the sensor characterization and contextualized within aircraft well-clear volumes.

Chester V. Dolph↗
NASA NTRS1995

Low-luminosity active galaxies: Are they similar to Seyfert galaxies?

A careful X-ray study of five low-luminosity active galactic nuclei (LLAGNs) was conducted to address specifically the issue of whether the dominant X-ray production mechanism is the same at all luminosities in AGNs. The sample consists of three Seyfert 1 galaxies (NGC 4639, NGC 5033, and NGC 5273), and two low-ionization nuclear emission-line regions (NGC 3642 and NGC 4278) having a weak broad component of H-alpha emission. We find that the X-ray emission (ROSAT High Resolution Interferometer (HRI)) is mostly or entirely nuclear (less than or approximately = 500 pc) despite the low X-ray luminosities (approximately 9 x 10(exp 40) ergs/s) of the sample. The correlation between X-ray luminosity and the broad H-alpha emission-line luminosity observed in high-luminosity active galaxies continues down to the low-luminosity range; the mean L(sub X)/L(sub H-alpha) ratio of LLAGNs is approximately 14, while that of AGNs is approximately 29. ROSAT Position Sensitive Proportional Counter (PSPC) observations of three LLAGNs in our sample indicate that the 0.2-2.2 keV X-ray spectral energy distributions are similar to those seen in Seyfert nuclei but do not have high intrinsic absorbing columns. Using existing ultraviolet data for four LLAGNs, we find that the 'optical' (2500 A) to X-ray spectral index (alpha(sub OX)) has an average upper limit of 1.6; for comparison, the measured value in AGNs is typically 1.4, while that in M81 (the prototypical LLAGN) is 1.0.

Koratkar, A.↗
NASA NTRS1993

Spatial Variations in the Spectral Properties of Bright Regions on Mars

Much of the surface of Mars is covered by material that is bright and reddish at visible wavelengths and which is interpreted as chemically altered soil. High spatial resolution data from the ISM near-infrared imaging spectrometer on the Phobos 2 spacecraft have provided new information about the composition and compositional heterogeneity of this soil. Most bright soil exhibits a weak, narrow absorption feature near 2.2 micron, suggesting the presence of poorly crystalline phyllosilicate. The strength of the 3.0-micron H2O absorption exhibits spatially coherent variations, with stronger absorptions occurring in specific geologic units. These variations may result from differences in the content of molecular water in soils developed on different deposits. Additionally, the position and shape of the 0.9-micron Fe(3+) absorption indicate hematite to be present in bright soils covering many areas, including Tharsis. However, other large areas covered by bright soil, including much of Arabia, exhibit a deeper absorption at a longer wavelength, suggesting occurrence of ferric minerals other than hematite. These spectral heterogeneities indicate that bright martian soil is compositionally diverse and not completely homogenized by eolian activity. The compositional differences may result from different histories of chemical alteration of parent materials and their resulting soils, possibly including local effects of liquid water.

Murchie, Scott↗
NASA NTRS2018

Validation of MODIS 3 km Land Aerosol Optical Depth from NASA's EOS Terra and Aqua Missions

In addition to the standard resolution product (10km), the MODerate resolution Imaging Spectroradiometer (MODIS) Collection 6 (C006) data release included a higher resolution (3km). Other than accommodations for the two different resolutions, the 10 and 3km Dark Target (DT) algorithms are basically the same. In this study, we perform global validation of the higher-resolution aerosol optical depth (AOD) over global land by comparing against AErosol RObotic NETwork (AERONET) measurements. The MODIS-AERONET collocated data sets consist of 161410 high-confidence AOD pairs from 2000 to 2015 for Terra MODIS and 2003 to 2015 for Aqua MODIS. We find that 62.5 and 68.4% of AODs retrieved from Terra MODIS and Aqua MODIS, respectively, fall within previously published expected error bounds of +/-(0.05+0.2 × AOD), with a high correlation (R = 0.87). The scatter is not random, but exhibits a mean positive bias of ∼ 0.06 for Terra and ∼ 0.03 for Aqua. These biases for the 3km product are approximately 0.03 larger than the biases found in similar validations of the 10km product. The validation results for the 3km product did not have a relationship to aerosol loading (i.e., true AOD), but did exhibit dependence on quality flags, region, viewing geometry, and aerosol spatial variability. Time series of global MODIS-AERONET differences show that validation is not static, but has changed over the course of both sensors' lifetimes, with Terra MODIS showing more change over time. The likely cause of the change of validation over time is sensor degradation, but changes in the distribution of AERONET stations and differences in the global aerosol system itself could be contributing to the temporal variability of validation.

Gupta, Pawan↗
NASA NTRSDate not supplied

Decoupling the Effects of Anthropogenic Emission Reductions from the Meteorology and Natural Emissions in TROPOMI NO 2 Retrievals During the 2020 COVID-19 Lockdowns

Satellite measurements during the COVID-19 lockdowns that began in 2020 revealed unprecedented reductions in NO 2 tropospheric vertical column densities (VCD). These reductions have largely been attributed to reduced anthropogenic emissions associated with abrupt decreases in road traffic and other power consuming business activities. Although decreased emissions tended to be the main contributor to the observed NO 2 VCD reduction, meteorological variability also played a role. Whereas the observed VCD changes were predominantly negative in places where public health policies were strictly enforced, meteorology had both positive and negative effects over short time intervals. Here, we present results from a global study of the NO 2 reductions aimed at disentangling the meteorological and natural emission variability from the anthropogenic emissions over the world’s most populated megacities. For this study, NASA’s TROPOMI NO 2 algorithm was used in conjunction with the Global Modeling Initiative (GMI) chemical transport model to separate the contributions due emissions and meteorology. A priori NO 2 profiles were generated from two GMI simulations performed for 2020 at a resolution of 0.25° longitude x 0.25° latitude. The first simulation used updated, COVID-impacted NOX emissions based on Forster et al. (2020), while the second simulation used the 2019 emissions with the 2020 meteorology, referred to here as 2020BAU. The 2020BAU data set allowed for the decoupling of the emission component from the meteorology. When compared to the same period in 2019, NO 2 column amounts during the lockdowns were reduced in 35 out of 36 cities. While reduced emissions contributed most to the observed total change in NO 2 during the lockdowns, the effects of meteorology were significant, ranging between 40% (Chennai) and 15% (Beijing). In China, an increase in NO 2 levels due to meteorology were observed in five out of the seven cities considered in the study. Use of different a-priori NO 2 profiles from the two simulations in our TROPOMI retrievals allowed for a determination of retrieval errors that ranged from -1.7% to -11.0%. We used the quality assurance flag > 0.75 to select the highest quality scenes in the study period. Using the GMI, we estimated the sampling biases to be in the range -11% to 10% of the total change for the cities in our study.

Brad Fisher↗
NASA NTRS2024

Molecules in Cool Stars: The A 2 Π − X 2 Σ + and the B 2 Σ + − X 2 Σ + Band Systems of CaCl

Cool red giant stars exhibit absorption bands of calcium monochloride (CaCl) in the optical region. In this work, the bands of CaCl corresponding to the A 2 Π − X 2 Σ + transition with v' ≤ 4 and v'' ≤ 4, and B 2 Σ + − X 2 Σ + transition with v' ≤ 2 and v'' ≤ 2 are rotationally analyzed with PGOPHER, a multipurpose program for simulating and fitting molecular spectra. All bands were analyzed using high-resolution absorption spectra collected at the National Solar Observatory in 1985, calibrated with atomic lines from a high-resolution emission spectrum obtained in a separate hollow cathode experiment. The results are compared with previous laser-induced fluorescence measurements. Overall, the accuracy of spectroscopic constants for the A2Π and B2Σ+ states is improved. Scaled transition dipole moment calculations were used to obtain line strengths. Line lists are provided with Einstein A coefficients and oscillator strengths, which can be used to determine CaCl stellar abundances. Additionally, isotope splittings allowed us to estimate band origins for the 40 Ca 37 Cl isotopologue based on band-head positions.

Léo Lavy↗
NASA NTRS1984

The high resolution submillimetre spectrum of the stratosphere

The structure of the stratospheric spectrum, measured with a resolution of 0.0033/cm unapodized in the 7-90/cm spectral interval is described. The spectra from measurements recorded on April 24, 1979 from a balloon-borne platform at about 39 km altitude launched from the National Scientific Balloon Facility of Palestine, TX are presented. The main spectroscopic constituents include a few strong and saturated lines due to the rotational spectrum of water vapor, to magnetic dipole transitions of oxygen, and to the rotational spectrum of ozone. It is shown that the lines of ozone prevent the positive identification of the contribution to the submillimeter spectrum of several minor constituents such as HF, HCl, HCN, HNO3, and N2O. The assignments which are possible in the spectra are revised.

Carli, B.↗
NASA NTRS1996

Determination of 2,3,7,8-chlorine-substituted dibenzo-p-dioxins and -furans at the part per trillion level in United States beef fat using high-resolution gas chromatography/high-resolution mass spectrometry

As part of the U.S. EPA Dioxin Reassessment Program, the 2,3,7,8-chlorine-substituted dibenzo-p-dioxins and furans were measured at part per trillion (ppt) levels in beef fat collected from slaughter facilities in the United States. This is the first statistically designed national survey of these compounds in the U.S. beef supply. Analyte concentrations were determined by high-resolution gas chromatography/high-resolution mass spectrometry, using isotope dilution methodology. Method limits of detection on a whole weight basis were 0.05 ppt for TCDD and 0.10 ppt for TCDF, 0.50 ppt for the pentas (PeCDDs/PeCDFs)/hexas (HxCDDs/HxCDFs)/heptas (HpCDDs/HpCDFs), and 3.00 ppt for the octas (OCDD/OCDF). Method detection and quantitation limits were established on the basis of demonstrated performance criteria utilizing fortified samples rather than by conventional signal-to-noise or variability of response methods. The background subtraction procedures developed for this study minimized the likelihood of false positives and increased the confidence associated with reported values near the detection limits. Mean and median values for each of the 2,3,7,8-Cl-substituted dioxins and furans are reported, along with the supporting information required for their interpretation. The mean toxic equivalence values for the samples are 0.35 ppt (nondetects = 0) and 0.89 ppt (nondetects = 1/2 LOD).

Benzofurans/analysis↗
NASA NTRS2001

Large Scale Characteristics and Variability of the Global Sea Ice Cover

More than two decades of satellite passive microwave data are used to study and evaluate the large scale characteristics and the changing state of the sea ice cover in both the Northern and Southern Hemispheres. Satellite data provide day/night almost continuous observation of global sea ice cover thereby enabling quantitative variability studies at various time scales. Despite coarse sensor resolution, spatial detail is provided through the use of sea ice concentrations which are derived using an algorithm that determines the fraction of ice and open water within each satellite footprint. Large seasonal fluctuations in the extent are apparent with those of the Southern Hemisphere having larger amplitudes but less symmetrical seasonal distribution than those of the Northern Hemisphere. The large scale interannual variability of the ice cover has been evaluated globally as well as regionally and in the Northern Hemisphere, the yearly anomaly maps show a predominance of positive values in the 1980s and negative values in the 1990s. Regression analysis show that the ice extent and ice area are on a decline at the rate of -2.0 +/- 0.5% and -3.1 +/- 0.3% per decade, respectively, in the Northern Hemisphere but there are regions like the Bering Sea with positive trends. What is intriguing, however, is that the perennial sea ice cover has been declining at a much faster rate than for the entire hemisphere, i.e., 6.7 +/- 2.4% and 8.3 +/- 2.4 % per decade for ice extent and ice area, respectively. The perennial ice cover consists mainly of thick multiyear ice floes, and its persistent decline would mean a reduction in the average thickness of sea ice and a change in the overall characteristics of the Arctic sea ice cover. Furthermore, the yearly anomaly patterns are coherent with those of surface temperatures derived from 19 years of thermal infrared AVHRR data. The latter also shows that in consolidated ice regions, the average temperature during summer minima has been increasing at about 0.9 +/- 0.6 K per decade.

Comiso, Josefino C.↗
NASA NTRS2008

Chromatic Modulator for a High-Resolution CCD or APS

A chromatic modulator has been proposed to enable the separate detection of the red, green, and blue (RGB) color components of the same scene by a single charge-coupled device (CCD), active-pixel sensor (APS), or similar electronic image detector. Traditionally, the RGB color-separation problem in an electronic camera has been solved by use of either (1) fixed color filters over three separate image detectors; (2) a filter wheel that repeatedly imposes a red, then a green, then a blue filter over a single image detector; or (3) different fixed color filters over adjacent pixels. The use of separate image detectors necessitates precise registration of the detectors and the use of complicated optics; filter wheels are expensive and add considerably to the bulk of the camera; and fixed pixelated color filters reduce spatial resolution and introduce color-aliasing effects. The proposed chromatic modulator would not exhibit any of these shortcomings. The proposed chromatic modulator would be an electromechanical device fabricated by micromachining. It would include a filter having a spatially periodic pattern of RGB strips at a pitch equal to that of the pixels of the image detector. The filter would be placed in front of the image detector, supported at its periphery by a spring suspension and electrostatic comb drive. The spring suspension would bias the filter toward a middle position in which each filter strip would be registered with a row of pixels of the image detector. Hard stops would limit the excursion of the spring suspension to precisely one pixel row above and one pixel row below the middle position. In operation, the electrostatic comb drive would be actuated to repeatedly snap the filter to the upper extreme, middle, and lower extreme positions. This action would repeatedly place a succession of the differently colored filter strips in front of each pixel of the image detector. To simplify the processing, it would be desirable to encode information on the color of the filter strip over each row (or at least over some representative rows) of pixels at a given instant of time in synchronism with the pixel output at that instant.

Hartley, Frank↗
NASA NTRS2013

Measuring Temperature-Dependent Propagating Disturbances in Coronal Fan Loops Using Multiple SDO-AIA Channels and Surfing Transform Technique

A set of co-aligned high resolution images from the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO) is used to investigate propagating disturbances (PDs) in warm fan loops at the periphery of a non-flaring active region NOAA AR 11082. To measure PD speeds at multiple coronal temperatures, a new data analysis methodology is proposed enabling quantitative description of sub visual coronal motions with low signal-to-noise ratios of the order of 0.1. The technique operates with a set of one-dimensional surfing signals extracted from position-timeplots of several AIA channels through a modified version of Radon transform. The signals are used to evaluate a two-dimensional power spectral density distribution in the frequency - velocity space which exhibits a resonance in the presence of quasi-periodic PDs. By applying this analysis to the same fan loop structures observed in several AIA channels, we found that the traveling velocity of PDs increases with the temperature of the coronal plasma following the square root dependence predicted for the slow mode magneto-acoustic wave which seems to be the dominating wave mode in the studied loop structures. This result extends recent observations by Kiddie et al. (2012) to a more general class of fan loop systems not associated with sunspots and demonstrating consistent slow mode activity in up to four AIA channels.

Solar Corona↗
NASA NTRS1965

Electro-optic crystals and their use for light modulation

Several methods of modulating a beam of light, which have been described in the literature, utilizing the influence of an electrical signal on the birefringence of certain crystals, will be reviewed. These employ optics which respond to the state of polarization of a light beam, and include intensity modulation, position modulation, and the possibility of an electrically tuned optical filter. The influence of the piezo-optic, or strain contribution to the total electro-optic response in the design of an optoelectronic device will be discussed. Current experimental work in our laboratory in which the strain contribution is separated from the direct effect will be described. The strain-free effect is measured by applying a step voltage to the crystal, and observing the initial response. The electro-optical transient response can be observed with nanosecond time resolution. An electronic sampling technique is used to extract the desired response from photon noise. The stress-free or low-frequency effect is measured similarly but at low audio frequencies. Single crystal tetragonal BaT10 3 has been investigated in detail with the result that the strain-optic contribution to the low frequency effect r_(c) = r_(33)—r_(13) is about 80% of the total, where it is only 10% in KDP and 45% in ADP. The magnitudes of the electro-optic effect, dielectric constant, and other related properties are compared for several materials potentially useful as electro-optic modulators, and some comments are made about the practical problems of building a modulator.

ELECTRO-OPTICS↗