Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxide Particles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Novel self-assembled two-dimensional layered oxide structure incorporated with Au nanoinclusions towards multifunctionalities

Two-dimensional (2D) layered oxides have recently attracted wide attention owing to the strong coupling among charges, spins, lattice, and strain, which allows great flexibility and opportunities in structure designs as well as multifunctionality exploration. In parallel, plasmonic hybrid nanostructures exhibit exotic localized surface plasmon resonance (LSPR) providing a broad range of applications in nanophotonic devices and sensors. A hybrid material platform combining the unique multifunctional 2D layered oxides and plasmonic nanostructures brings optical tuning into the new level. Here, a novel self-assembled Bi 2 MoO 6 (BMO) 2D layered oxide incorporated with plasmonic Au nanoinclusions has been demonstrated via one-step pulsed laser deposition (PLD) technique. Comprehensive microstructural characterizations, including scanning transmission electron microscopy (STEM), differential phase contrast imaging (DPC), and STEM tomography, have demonstrated the high epitaxial quality and particle-in-matrix morphology of the BMO-Au nanocomposite film. DPC-STEM imaging clarifies the magnetic domain structures of BMO matrix. Three different BMO structures including layered supercell (LSC) and superlattices have been revealed which is attributed to the variable strain states throughout the BMO-Au film. Owing to the combination of plasmonic Au and layered structure of BMO, the nanocomposite film exhibits a typical LSPR in visible wavelength region and strong anisotropy in terms of its optical and ferromagnetic properties. This study opens a new avenue for developing novel 2D layered complex oxides incorporated with plasmonic metal or semiconductor phases showing great potential for applications in multifunctional nanoelectronics devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Enable High-Energy LiNi0.5Co0.2Mn0.3O2 by Ultra-Thin Coating through Wet Impregnation

A high cut-off voltage is required for nickel-rich layered oxide LiNixCoyMnzO2 (NCM) to meet the high energy density requirement of lithium-ion batteries in electric vehicles. However, such a high voltage application leads to an unstable interface between NCM and liquid electrolytes. To stabilize the interface, the facile wet impregnation method has been developed to apply an ultra-thin Al2O3 coating layer on the NCM particles. This coating layer was found to have a strong interaction with the NCM and resulted in Al-doped NCM at the surface structure of NCM. The change of surface structure can not only reduce the surface resistance of lithium diffusion of LiNi0.5Co0.2Mn0.3O2 (NCM523), but also stabilize the solid electrolyte interface between NCM523 and the electrolyte with the cut-off voltage of 4.5 V vs. Li/Li+. Compared to other coating methods, wet impregnation coating can provide an ultra-thin and uniform coating with surface doping on NCM particles. Furthermore, this scalable coating method can be applied to various electrode materials without adding much additional cost.

25 ENERGY STORAGE↗
DOE OSTI2023

X-ray absorption spectroscopic study of the alumina supported Fe and FeMo catalysts for methane dehydrogenation

Nanoscale Fe (5%Fe/Al 2 O 3 ) and FeMo (4.5%Fe-0.5%Mo/Al 2 O 3 ) catalysts are prepared by precipitating metal components onto alumina and then reducing in hydrogen at 700 °C for 2 hrs. Here, the catalysts are characterized before and after their exposures to methane at 700 °C, employing ex-situ X-ray absorption spectroscopy (XAS) and X-ray diffraction techniques. XAS data of the as-prepared catalysts shows that, iron precipitates onto alumina as 6L-ferrihydrite, and Mo is present as molybdate (Mo(VI)O 4 2- ). The molybdate, which binds the alumina in the as-prepared FeMo catalyst, is partially reduced to MoO 2 . The reduction of iron to metallic state is incomplete because the ferrous iron binds the alumina, forming hercynite. After several hrs of methane exposure to both the catalysts at 700 °C, a major Fe 3 C and a graphite phase are observed only in the FeMo catalyst. The observation confirms that the Mo promotes more iron to an active Fe metal, a part of that metal converts to Fe 3 C and austenite (Fe x C). Concurrently, the MoO 2 converts to Mo-oxycarbide (MoO x C y ), the latter then carburize to Mo 2 C in the FeMo catalyst. The Fe metal, Mo-oxycarbide and metal carbides are mainly responsible for the conversion of methane to H 2 and carbon. At reaction temperature > 900 °C, the Mo carbide particles agglomerate, and the excess carbon deposits on this agglomerate leading to catalyst deactivation. The deactivated catalyst is regenerated with CO 2 treatment at 1000 °C to restore its initial oxide structure.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

A perspective on single-crystal layered oxide cathodes for lithium-ion batteries

As the demand for lithium-ion batteries grows exponentially to feed the nascent electric-vehicle and grid-storage markets, the need for higher energy density and longer cycle life becomes more apparent. Increasing the nickel content in the layered-oxide cathodes has been a dominant strategy to increase energy density, but this has exacerbated the surface reactivity concerns. Furthermore, the high states of charge associated with increased capacity lead to cracking of the polycrystalline cathode particles, which exposes fresh surfaces and accelerates capacity fade. Single-crystal cathode particles with low susceptibility to cracking have recently taken on intense interest due to their remarkable cyclability. Many different approaches to single-crystal synthesis have been explored, but there has been no systematic analysis of the different techniques to date. Additionally, many reports have taken on a trial-and-error approach, ignoring well established literature on grain growth outside the battery field. This perspective reviews the literature on single-crystal cathode synthesis through the lens of classic grain growth theories, providing insight and hopefully accelerating the adoption of the promising single-crystal cathode morphology.

25 ENERGY STORAGE↗
DOE OSTI2023

Redox-Based Chemical Looping Large-Scale Air Separation Unit Designs Using Perovskite Material

Oxygen production by means of air separation through redox cycle reactions of Sr 1–x Ca x FeO 3-δ perovskite particles is examined numerically in the context of modular large-scale units. Fixed-bed, multicomponent reactor designs allowing for the recovery of the energy released by the exothermic oxidation (or adsorption) to enhance the endothermic reduction (or desorption) of the perovskite material are considered and compared against a baseline cylindrical packed bed. Numerically, the gas–solid reacting system is approximated as a single-phase reacting gas flow through a porous medium of constant porosity. The redox kinetics account for the oxygen nonstoichiometry of the perovskite, which exhibits a dependence on the temperature and the oxygen partial pressure, in order to describe some mechanisms of the oxygen vacancies. Results show that the spontaneous release of the oxygen from the lattice arrangements, through the thermal management of the heat of the oxidation reaction from the geometrical design of the reactors, can be enhanced up to 4% with respect to the baseline oxygen production of 0.201 g O 2 ·h –1 ·g perovskite –1 with the cylindrical packed bed, in the condition of operations in this work, at 500 °C. Sensitivity to the operation temperature showed that the oxygen production is greatly enhanced by approximately 30% with the increase of the temperature from 500 to 550 °C. We report this result is consistent with experimental observations of faster release of the oxygen from the lattice arrangements of this perovskite at 550 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

CROCUS Air Quality Data at Argonne National Laboratory Prairie Site

The AQT (Vaisala AQT530) instrument provides observations on meteorological conditions, including particulate matter (PM2.5, PM10), gas species concentrations (NO, NO2, O3, CO), and environment temperature and moisture. These measurements are critical for understanding air quality. These measurements are useful for understanding changes in aerosol properties, air quality research, and comparing to model experiments especially in urban environments. These measurements are collected at the Argonne Testbed for Multiscale Observational Science (ATMOS), a prairie field site at Argonne National Laboratory in Lemont, Illinois. Data is available in the netCDF data format, we encourage data users review documentation through Project Pythia to understand how to work with netCDF data https://foundations.projectpythia.org/core/data-formats/netcdf-cf.html. Each file contains one day's worth of data (24 hours, starting at 0000 UTC). The data is aggregated into daily frequency to make it easier to process multiple days, and compress the higher-resolution fields. File naming convention includes the project (CROCUS), location (atmos), data level (raw, a1), date (year, month, day), and hour (0000).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Oxidized structure and Compositional properties of 1144 phase FBS by analytical electron microscopy

The 1144 phase (Ae1A1Fe4As4) shows a strong advantage of engineering fabrication among Fe Iron)-based superconductor (FBS) family due to the robustness of its superconducting properties with respect to chemical inhomogeneities, granted by its uniform crystalline-layered structure. This regularity is furthermore associated to crystalline defects capable of acting as efficient pinning centers, which high critical currents achieved at high fields for these superconductors. Like other FBS phases, its lossless current-carrying capability can be remarkably degraded by distractions at grain boundaries (GBs). GB oxidation is an issue of upmost importance to the realization of the practical FBS application for high field (> 20T) magnet. In this study, we explore oxidized grain boundary and intrinsic grain structural properties of 1144 polycrystalline samples by applying analytical electron microscopy such as atomic resolution scanning transmission electron microscopy and atom probe tomography. These structural properties of samples produced by a mechanochemically assisted synthesis are evaluated following the degradation of superconducting properties due to oxidation. We observe a strong correlation between the contamination at grain boundaries and the decrease of transport properties of the bulk sample, while the crystallin structure seems to be not affected by the oxidation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1975

NO sub X Deposited in the Stratosphere by the Space Shuttle Solid Rocket Motors

The possible effects of the interaction of the plumes from the two solid rocket motors (SRM) from the space shuttles and mixing of the rocket exhaust products and ambient air in the base recirculation region on the total nitrous oxide deposition rate in the stratosphere were investigated. It was shown that these phenomena will not influence the total NOx deposition rate. It was also shown that uncertainties in the particle size of Al2O3, size distributions and particle/gas drag and heat transfer coefficients will not have a significant effect on the predicted NOx deposition rate. The final results show that the total mass flow of NOx leaving the plume at 30 km altitude is 4000 g./sec with a possible error factor of 3. For a vehicle velocity of 1140 meter/sec this yields an NOx deposition rate of about 3.5 g./meter. The corresponding HCl deposition rate at this altitude is about a factor of 500 greater than this value.

Pergament, H. S.↗
NASA NTRS1989

Indicators of transport and vertical motion from correlations between in situ measurements in the Airborne Antarctic Ozone Experiment

Analysis of small-scale structure in the in situ measurements made from the ER-2 during the Airborne Antarctic Ozone Experiment shows the existence of a region at the boundary of the chemiclly perturbed region where the mixing ratios and small-scale structure of trace gases are influenced by transport across the boundary. This transition region is characterized by horizontal interchange and vertical layering of air parcels from within and outside of the chemically perturbed region and negative small-scale correlations between ClO and ozone. The horizontal transport in this region creates large surface areas between dissimilar air masses, providing the potential for substantial mixing. Correlations between ClO and O3 show that the transition region extends to 2-4 deg of latitude to either side of the boundary of the chemically perturbed region. A + or - 4-deg-wide transition region would contain nearly as much air as the chemically perturbed region proper. Analysis of water vapor and nitrous oxide data suggests that diabatic descent is associated with dehydration. This could be caused by strong radiative cooling of those polar stratospheric clouds in which enough water condenses for the particles to fall and dehydrate the air.

Murphy, D. M.↗
NASA NTRS1990

Propulsion system filter sizing considerations for the Galileo spacecraft

Filtration capacity of the Galileo propulsion system has been investigated. Ground testing of flight spare components has been conducted to determine the representative number and size distribution of particulate matter collected in flow tests. For these tests and for filter qualification tests, a number of effects were examined. The influence of gravitational particle settling on ground test results vs the flight environment was considered. Centrifugal effects inherent in the test apparatus and/or the propulsion system could have an influence. Variability among particle sizing techniques was explored. The influence of size distribution, particle shape, and density in the choice of a particulate test material was studied. Characteristics for AC Coarse Dust (an industry standard filter test media), microscopic polymer beads, and aluminum oxide particulate test matter are listed. Filtration tests were conducted using AC Coarse Dust and mixtures containing components of AC Coarse Dust. These results are expected to be useful data for filter sizing of future spacecraft.

Jan, Darrell L.↗
NASA NTRS1992

Toughened uni-piece fibrous insulation

A porous body of fibrous, low density silica-based insulation material is at least in part impregnated with a reactive boron oxide containing borosilicate glass frit, a silicon tetraboride fluxing agent and a molybdenum silicide emittance agent. The glass frit, fluxing agent and emittance agent are separately milled to reduce their particle size, then mixed together to produce a slurry in ethanol. The slurry is then applied to the insulation material and sintered to produce the porous body.

Leiser, Daniel B↗
NASA NTRS2002

Sol-Gel Derived Hafnia Coatings

Sol-gel derived hafnia coatings are being developed to provide an oxidation protection layer on ultra-high temperature ceramics for potential use in turbine engines (ultra-efficient engine technology being developed by NASA). Coatings using hafnia sol hafnia filler particles will be discussed along with sol synthesis and characterization.

Feldman, Jay D.↗
NASA NTRS2005

Mineral Composition and Abundance of the Rocks and Soils at Gusev and Meridiani from the Mars Exploration Rover Mini-TES Instruments

The Miniature Thermal Emission Spectrometer (Mini-TES) has provided remote measurements of mineralogy, thermophysical properties, and atmospheric temperature profile and composition of the outcrops, rocks, spherules, and soils surrounding the Spirit and Opportunity Rovers. The mineralogy of volcanic rocks provides insights into the composition of the source regions and the nature of martian igneous processes. Carbonates, sulfates, evaporites, and oxides provide information on the role of water in the surface evolution. Oxides, such as crystalline hematite, provide insight into aqueous weathering processes, as would the occurrence of clay minerals and other weathering products. Diurnal temperature measurements can be used to determine particle size and search for the effects of sub-surface layering, which in turn provide clues to the origin of surficial materials through rock disintegration, aeolian transport, atmospheric fallout, or induration. In addition to studying the surface properties, Mini-TES spectra have also been used to determine the temperature profile in the lower boundary layer, providing evidence for convective activity, and have determined the seasonal trends in atmospheric temperature and dust and cloud opacity.

Christensen, P. R.↗
NASA NTRS2005

Nanostructured and layered lithium manganese oxide and method of manufacturing the same

Nanostructured and layered lithium manganese oxide powders and methods of producing same. The powders are represented by the chemical formula, LixMn1-yMyO2, where 0.5<x<1.33, 0?y?0.5 and have an average primary particle diameter from 5 nm to 300 nm, preferably between 5 and 100 nm, and M is at least one cation dopant. The powders can be formed into active cathode materials in Li-ion and Li rechargeable batteries.

Singhal, Amit↗
DOE OSTI2021

Hollow nanoparticles with hybrid double layers

The present invention discloses the morphology of hollow, double-shelled submicrometer particles generated through a rapid aerosol-based process. The inner shell is an essentially hydrophobic carbon layer of nanoscale dimension (5-20 nm), and the outer shell is a hydrophilic silica layer of approximately 5-40 nm, with the shell thickness being a function of the particle size. The particles are synthesized by exploiting concepts of salt bridging to lock in a surfactant (CTAB) and carbon precursors together with iron species in the interior of a droplet. This deliberate negation of surfactant templating allows a silica shell to form extremely rapidly, sealing in the organic species in the particle interior. Subsequent pyrolysis results in a buildup of internal pressure, forcing carbonaceous species against the silica wall to form an inner shell of carbon. The incorporation of magnetic iron oxide into the shells opens up applications in external stimuli-responsive nanomaterials.

John, Vijay T.↗
DOE OSTI2023

Collection, release, and detection of analytes with polymer composite sampling materials

A unique fiber core sampler composition, related systems, and techniques for designing, making, and using the same are described. The sampler is used to interface with existing field instrumentation, such as Ion Mobility Spectrometer (IMS) equipment. Desired sampler characteristics include its: stiffness/flexibility; thermal mass and conductivity; specific heat; trace substance collection/release dependability, sensitivity and repeatability; thickness; reusability; durability; stability for thermal cleaning; and the like. In one form the sampler has a glass fiber core with a thickness less than 0.3 millimeter that is coated with a polymer including one or more of: polymeric organofluorine, polyimide, polyamide, PolyBenzlmidazole (PBI), PolyDiMethylSiloxane (PDMS), sulfonated tetrafluoroethylene (PFSA) and Poly(2,6-diphenyl-p-phenylene Oxide) (PPPO). Multiple polymer coatings with the same or different polymer types may be included, core/substrate surface functionalization utilized, and/or the core/substrate may be at partially filled with thermally conductive particles.

Addleman, Raymond S.↗
NASA NTRS1999

Combustion of Metals in Reduced-Gravity and Extraterrestrial Environment

As a result of the ongoing exploration of Mars and the several unmanned and manned missions planned for the future, increased attention has been given to the use of the natural resources of the planet for rocket propellant production and energy generation. Since the atmosphere of Mars consists of approximately 95% carbon dioxide (CO2), this gas is the resource of choice to be employed for these purposes. Unfortunately, CO2 is also a final product in most combustion reactions, requiring further processing to extract useful reactants such as carbon monoxide (CO), oxygen (O2), and hydrocarbons. An exception is the use Of CO2 as an oxidizer reacting directly with metal fuel. Since many metals burn vigorously with CO2, these may be used as an energy source and as propellants for an ascent/descent vehicle in sample-collection missions on Mars. In response to NASA's Human Exploration and Development of Space (HEDS) Enterprise to search for appropriate in-situ resource utilization techniques, this investigation will study the burning characteristics of promising metal/CO2 combinations. The use of reduced gravity is essential to eliminate the intrusive buoyant flows that plague the high-temperature metal reactions, to remove the destructive effect of gravity on the shape of molten metal samples, and to study the influence of radiative heat transfer from solid oxides undisturbed by natural convection. In studies with large metal specimens, the burning process is invariably influenced by strong convective currents that accelerate the reaction and shorten the burning times. Although these currents are nearly absent from small burning particles, the high emissivity of the flames, rapid reaction, small length scales, and intermittent explosions make the gathering of any useful information on burning rates and flame structure very difficult. This investigation has the ultimate goal of providing a careful probing of flame structure and dynamics by taking advantage of large, free-floating spherical metal samples and their corresponding long burning times available in reduced gravity. The first set of experiments has been conducted with magnesium (Mg) samples burning in the low-gravity environment generated by an aircraft flying parabolic trajectories. Owing to its high adiabatic flame temperature, oxidizer/fuel ratio, and heat per unit mass of fuel, as well as its low toxicity and low ignition temperature, Mg has been identified as a promising metal fuel with CO2 as oxidizer. The experimental effort is complemented by the development of a numerical model combining gas-phase chemical kinetics and transport mechanisms.

Abbud-Madrid, A.↗
DOE OSTI2026

Strong Sensitivity of Simulated Biomass Burning Aerosol Transport and Radiative Effects Over the South Atlantic to Carbonaceous Aerosol Aging and Particle Density

Biomass burning aerosol (BBA) impacts climate through aerosol‐cloud‐radiation interactions, but models disagree on the sign and magnitude of BBA radiative effects. We quantify the sensitivity of BBA radiative effects and transport to three BBA‐relevant processes and properties: parameterized oxidative aging of organic aerosol (OA), a combined change to black carbon (BC) density and the method for calculating aerosol refractive index, and reduction in OA density. We evaluate Unified Model simulations against two aircraft campaigns from summer 2017 over the Southeast Atlantic. The model generally performs well, such that discrepancies between the observational data sets may sometimes limit the precision of the evaluation. Our newly developed aging parameterization reproduces observed OA:BC mass ratios well and allows modeled OA:BC to decrease with smoke age, but increases bias in aerosol extinction and changes the BBA radiative effect little (+0.12 W m -2 ). We calculate aerosol refractive index using either a volume‐weighted component average or the Maxwell‐Garnett (MG) mixing assumption, which represents BC as small inclusions in a host material. Compared to MG mixing, the volume‐weighted average refractive index and reduced BC density increase aerosol absorption, substantially increasing the total BBA radiative effect (+2.66 W m -2 ) and amount of BBA transported across the ocean through BC self‐lofting. Reducing OA density to better match literature values changes the total BBA radiative effect by −1.96 W m -2 . Changes to direct radiative effects exceed changes to cloud radiative effects. Our findings emphasize the sensitivity of aerosol radiative effects and transport to these processes and properties, which we suggest could be improved in climate models.

Southeast Atlantic↗