Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Normal Distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Laminar flow control leading edge glove flight test article development

A laminar flow control (LFC) flight test article was designed and fabricated to fit into the right leading edge of a JetStar aircraft. The article was designed to attach to the front spar and fill in approx. 70 inches of the leading edge that are normally occupied by the large slipper fuel tank. The outer contour of the test article was constrained to align with an external fairing aft of the front spar which provided a surface pressure distribution over the test region representative of an LFC airfoil. LFC is achieved by applying suction through a finely perforated surface, which removes a small fraction of the boundary layer. The LFC test article has a retractable high lift shield to protect the laminar surface from contamination by airborne debris during takeoff and low altitude operation. The shield is designed to intercept insects and other particles that could otherwise impact the leading edge. Because the shield will intercept freezing rain and ice, a oozing glycol ice protection system is installed on the shield leading edge. In addition to the shield, a liquid freezing point depressant can be sprayed on the back of the shield.

Pearce, W. E.↗

Studies on Normal and Microgravity Annular Two Phase Flows

Two-phase gas-liquid flows occur in a wide variety of situations. In addition to normal gravity applications, such flows may occur in space operations such as active thermal control systems, power cycles, and storage and transfer of cryogenic fluids. Various flow patterns exhibiting characteristic spatial and temporal distribution of the two phases are observed in two-phase flows. The magnitude and orientation of gravity with respect to the flow has a strong impact on the flow patterns observed and on their boundaries. The identification of the flow pattern of a flow is somewhat subjective. The same two-phase flow (especially near a flow pattern transition boundary) may be categorized differently by different researchers. Two-phase flow patterns are somewhat simplified in microgravity, where only three flow patterns (bubble, slug and annular) have been observed. Annular flow is obtained for a wide range of gas and liquid flow rates, and it is expected to occur in many situations under microgravity conditions. Slug flow needs to be avoided, because vibrations caused by slugs result in unwanted accelerations. Therefore, it is important to be able to accurately predict the flow pattern which exists under given operating conditions. It is known that the wavy liquid film in annular flow has a profound influence on the transfer of momentum and heat between the phases. Thus, an understanding of the characteristics of the wavy film is essential for developing accurate correlations. In this work, we review our recent results on flow pattern transitions and wavy films in microgravity.

Balakotaiah, V.↗

X-57 Maxwell Airworthiness Validation Plan

This report is a Final Airworthiness Validation Plan (AVP) and describes how an aircraft like X-57 does (and does not) meet current airworthiness standards. The objective of this report is to create an example certification basis, associated means of compliance (MoC), and method of compliance for a distributed electric propulsion airplane under 14 Code of Federal Regulations (CFR) Part 21, “Certification Procedures for Products and Articles,” and its associated relevant sections of 14 CFR for “Airworthiness Standards” of Part 23, “Normal Category Airplanes,” Part 33 “Aircraft Engines,” and Part 35 “Propellers.” The approach to meet the objective is to use NASA’s X-57 Modification (Mod) IV flight demonstrator as an example and categorize its applicability to the regulations and standards according to the following three conditions: 1. Identify, where applicable, that the MoC and methods of compliance can be associated with existing Standard Specifications and Standard Practices of (ASTM) Committee F39 on Aircraft Systems and ASTM Committee F44 on General Aviation Aircraft; 2. If relevant ASTM standards do not exist, identify means and-or methods of compliance from appropriate Federal Aviation Administration (FAA) Advisory Circulars and other sources to use for the X-57 Mod IV vehicle; or 3. If no relevant certification rule, MoC, or method of compliance exists, highlight this omission and provide recommendations.

Herbert W Schlickenmaier↗

Microstructure Controlled Multi-Layer Porous Material Liner Tested On The Advanced Noise Control Fan

A novel concept of multilayer micro structurally controlled noise mitigation porous material was developed and experimentally validated in the laboratory by normal incidence impedance test. Extensive parametric studies were made to understand various parameters that influence acoustic absorption and transmission loss based on the test specimen size, particle size, porosity, pore size, and its distribution through the thickness. The results were reported in many publications. This work was focused on applying the concept and assessing the validity of the technology to aircraft turbomachine engines. The NASA Glenn Research Center’s Advanced Noise Control Fan (ANCF) low-speed test rig was selected. The liner insert required a 4-ft internal diameter cylinder with a 2-inch thick and 9-inch axial length. The liner was fabricated in eight segments and assembled in an aluminum test rig. The liner was tested for both tonal and broadband noise at the Notre Dame Turbomachinery Lab White Field test facility, where the ANCF is located. The study concludes that: Microstructurally controlled porous material is very effective in dissipating the sound energy; the liner is effective for tonal noise (2 to 13 dB reduction in noise levels) that constitutes the major part of the overall fan noise, especially the blade passing frequency which is generally the dominating component; Also, the liner is effective for broadband noise with reductions in sound pressure level of about 3 dB for the shaft order greater than 20. The proposed two-layer liner model demonstrated the validity of the concept. More studies are required to optimize the design.

Liner↗

Experimental investigation of a jet inclined to a subsonic crossflow

Experimental investigations have been conducted to determine the surface-pressure distribution on a flat plate and a body of revolution with a jet issuing at a large angle to the free stream and to obtain a better understanding of the entrainment mechanism close to the jet exit by quantitative mean velocity surveys. Pressure data were obtained with a flat plate model at several nozzle injection angles using a single round nozzle. For the body of revolution model, data were obtained with a round jet exhausting perpendicular to the crossflow and with two round jets spaced two to six nozzle diameters apart. Mean velocity measurements were obtained with laser velocimeter surveys near the base of a round jet exhausting normal to a flat plate. For the flat plate model, the pressure field shifts downstream and the entrainment effect decreases with decreasing nozzle injection angle. For the body of revolution model with two jets, the jet-induced effect of the rear jet on the surface-pressure distribution was less than the front jet. The flow regions close to the jet are defined by the laser surveys, but further mean velocity surveys are required to understand the entrainment mechanism.

Aoyagi, K.↗

Quantitative Measurements of Electronically Excited CH Concentration in Normal Gravity and Microgravity Coflow Laminar Diffusion Flames

With the conclusion of the SLICE campaign aboard the ISS in 2012, a large amount of data was made available for the analysis of the effect of microgravity on laminar coflow diffusion flames. Previous work focused on the study of sooty flames in microgravity as well as the ability of numerical models to predict its formation in a simplified buoyancy-free environment. The current work shifts the investigation to soot-free flames, putting an emphasis on the chemiluminescence emission from electronically excited CH (CH*). This radical species is of significant interest in combustion studies: it has been shown that the electronically excited CH spatial distribution is indicative of the flame front position and, given the relatively simple diagnostic involved with its measurement, several works have been done trying to understand the ability of electronically excited CH chemiluminescence to predict the total and local flame heat release rate. In this work, a subset of the SLICE nitrogen-diluted methane flames has been considered, and the effect of fuel and coflow velocity on electronically excited CH concentration is discussed and compared with both normal gravity results and numerical simulations. Experimentally, the spectral characterization of the DSLR color camera used to acquire the flame images allowed the signal collected by the blue channel to be considered representative of the electronically excited CH emission centered around 431 nm. Due to the axisymmetric flame structure, an Abel deconvolution of the line-of-sight chemiluminescence was used to obtain the radial intensity profile and, thanks to an absolute light intensity calibration, a quantification of the electronically excited CH concentration was possible. Results show that, in microgravity, the maximum flame electronically excited CH concentration increases with the coflow velocity, but it is weakly dependent on the fuel velocity; normal gravity flames, if not lifted, tend to follow the same trend, albeit with different peak concentrations. Comparisons with numerical simulations display reasonably good agreement between measured and computed flame lengths and radii, and it is shown that the integrated electronically excited CH emission scales proportionally to the computed total heat release rate; the two-dimensional electronically excited CH spatial distribution, however, does not appear to be a good marker for the local heat release rate.

chemiluminescence↗

The effect of central starbursts on the interstellar medium of dwarf galaxies

Major starburst events can last tens of millions of years, and in the process they can deposit significant amounts of energy into the surrounding interstellar medium. This energy from supernova and stellar winds imparts enough momentum to the interstellar medium (ISM) that portions of the ISM can become unbound and leave the parent galaxy, taking the metal-enriched stellar debris along. In dwarf galaxies, starbursts can produce enough total energy to unbind most or all of the ambient ISM. Whether this actually occurs is a strong function of the ellipticity of the ISM distribution, with flat disks and spheres being the limiting cases. We calculate whether 'blow out' along the symmetry axis of 'blow away' of the entire ISM occurs during a central starburst in dwarf galaxies as a function of galactic mass, starburst energy, ISM density, and ISM ellipticity. The calculations cover a range of 10(exp 7) to 10(exp 9) solar mass for dwarf galaxies and include 'normal' galaxies of 10(exp 11) solar mass as well. No massive dark matter halos are assumed to be present. We find that for physically reasonable values of total ISM mass and starburst energy a blow out along the symmetry axis occurs in the majority of cases, though a significant fraction of small dwarf galaxies can lose most of their ISM. As no dark matter halos or clumpy ISM distributions are included, it is apparent that the ISM in most dwarf galaxies may be generally resistant to significant disruption by a central starburst event. The effects of this range of behavi or on the metallicities that would be observed in these galaxies is discussed.

De Young, David S.↗

Ultraviolet photometry from the Orbiting Astronomical Observatory. XXXIII - The symbiotic star AG Pegasi

Ultraviolet broadband photometry obtained with the Wisconsin Experiment Package on OAO 2 is presented for the symbiotic binary star AG Peg. The hot component of the binary is found to be a luminous ultraviolet source, with an energy distribution consistent with its WN6 optical spectral type. Total luminosities of 1000 and 17,000 suns are found for the hot star by assuming, respectively, that the giant primary of AG Peg is a normal M3 III star and that it fills its Roche lobe. The eruptive behavior of AG Peg is shown to require the higher luminosity, and the activity in AG Peg is discussed in terms of a very slow novalike nuclear-powered event.

Gallagher, J. S.↗

Electrophoretic cell separation by means of microspheres

The electrophoretic mobility of fixed human erythrocytes immunologically labeled with poly(vinylpyridine) or poly(glutaraldehyde) microspheres was reduced by approximately 40%. This observation was utilized in preparative scale electrophoretic separations of fixed human and turkey erythrocytes, the mobilities of which under normal physiological conditions do not differ sufficiently to allow their separation by continuous flow electrophoresis. We suggest that resolution in the electrophoretic separation of cell subpopulations, currently limited by finite and often overlapping mobility distributions, may be significantly enhanced by immunospecific labeling of target populations using microspheres.

Smolka, A. J. K.↗

Superfluid Helium Experiment for Spacelab 2

The Superfluid Helium Experiment is designed to study the properties of superfluid helium in zero gravity and demonstrate the operation of a versatile reusable superfluid helium experiment facility. The superfluid experiment will consist of three subexperiments. The quantized surface wave experiment is intended to contribute to an understanding of the quantum nature of He-2 and the interactions between the normal and superfluid components. The bulk fluid dynamics experiment will determine the response of the bulk helium to known accelerations. The thermal dynamics experiment will attempt to obtain a detailed understanding of the spatial distribution of temperatures and the thermal frequency spectrum in the bulk liquid. In addition, the superfluid helium cryostat will be instrumented to measure its performance in several critical areas.

Mason, P.↗

Rotational modulation of the chromospheric activity in Chi(1) Orionis (G0 V)

The age and rotation period of the solar type star Chi(1) Ori recommend it for a rotational modulation study of its strong UV emission lines. IUE observations have accordingly been made at four different phases during each of three separate rotation cycles, over a time span of 325 days. C IV, He II, and Mg II observations are consistent with a uniform spatial distribution and brightness for the Mg II emission network, and a more complex distribution of the regions producing the UV transmission region emission. Alternatively, if the area coverage of the chromospheric and transition region emission is nearly identical, the surface brightness contrast between stellar active regions and normal ones must increase by almost an order of magnitude in the higher temperature lines.

Simon, T.↗

Advanced information processing system

Design and performance details of the advanced information processing system (AIPS) for fault and damage tolerant data processing on aircraft and spacecraft are presented. AIPS comprises several computers distributed throughout the vehicle and linked by a damage tolerant data bus. Most I/O functions are available to all the computers, which run in a TDMA mode. Each computer performs separate specific tasks in normal operation and assumes other tasks in degraded modes. Redundant software assures that all fault monitoring, logging and reporting are automated, together with control functions. Redundant duplex links and damage-spread limitation provide the fault tolerance. Details of an advanced design of a laboratory-scale proof-of-concept system are described, including functional operations.

Lala, J. H.↗

The X-ray cluster Abell 744

X-ray and optical observations of the cluster of galaxies Abell 744 are presented. The X-ray flux (assuming H(0) = 100 km/s per Mpc) is about 9 x 10 to the 42nd erg/s. The X-ray source is extended, but shows no other structure. Photographic photometry (in Kron-Cousins R), calibrated by deep CCD frames, is presented for all galaxies brighter than 19th magnitude within 0.75 Mpc of the cluster center. The luminosity function is normal, and the isopleths show little evidence of substructure near the cluster center. The cluster has a dominant central galaxy, which is classified as a normal brightest-cluster elliptical on the basis of its luminosity profile. New redshifts were obtained for 26 galaxies in the vicinity of the cluster center; 20 appear to be cluster members. The spatial distribution of redshifts is peculiar; the dispersion within the 150 kpc core radius is much greater than outside. Abell 744 is similar to the nearby cluster Abell 1060.

Kurtz, M. J.↗

Accelerated plasma flows at the near-tail magnetopause

ISEE-1 and -2 fast plasma data of ion and electron distributions at 16 energies and 16 velocities are used to study accelerated particle flow events at the near-tail dusk magnetopause. The flows separated the plasma sheet from the magnetosheath, a situation which normally arises when the local magnetosheath and plasma sheet magnetic fields are close to being antiparallel. The flows were directed tailward at speeds up to twice those in the adjoining magnetosheath and had densities similar to those in the magnetosheath. The attendant ion and electron temperatures were between those in the magnetosheath and in the plasma sheet. The flow region closest to the magnetosheath had the highest velocity and the lowest density, and a lowered-density field line region appeared on the earthward side of the accelerated flow region. The flows had the velocity changes of a tangential stress balance and are taken as the location of field line merging near (and perhaps tailward) of the dawn-dusk terminator. Significantly fewer accelerated flows are seen in the dawn tail magnetopause, an asymmetry attributed to a seasonally dependent warping of the midtail neutral sheet or a superimposition of interplanetary magnetic field lines over the dusk magnetopause.

Gosling, J. T.↗

Scaling laws for the catastrophic collisions of asteroids

Collisions of asteroids have traditionally been studied through laboratory experiments involving targets with masses some 15 to 20 orders of magnitude less than the bodies they are intended to simulate. Here the problem of extrapolation of experimental results up to the size regimes of interest is considered. Scaling relations are developed for the shattering threshold and the size and velocity distributions of collisional fragments. A methodology which has often been used assumes that collisional outcomes (e.g., the size of the largest remaining fragment) are completely characterized by Q, the kinetic energy of the impactor normalized by the mass of the target body. This scaling is shown to be an unlikely special case of a more general scaling theory which indicates that collisional outcomes should depend on target size and encounter velocity, even when Q is held constant. In particular, as target size increases, the critical value of Q required to shatter a body, and the characteristic fragment velocities should initially decrease (in qualitative agreement with the recent model of Farinella et al., 1982) up to an asteroid size of perhaps 40 to 50 km; then, as the gravitational forces start to dominate, the value of Q will again increase (in qualitative agreement with the recent model of Davis et al., 1983 and 1985).

Holsapple, K. A.↗

Star counts and galactic structure

Star counts are discussed as an aid in studies of galactic structure. Iterative computations using a method-of-color-bins to match numerical models with observational data are described. The star counts provide bounds for the luminosity function and the color-magnitude diagram and allow spheroid normalization in a copycat Galaxy model which posits a galaxy with a Population I disk and a Population II spheroid. Good agreement has been obtained between star counts predicted by the model and observed distributions, including color and magnitude ranges and direction. Modifications being considered for the model include consideration of the halo, a galactic bulge and a thick disk. Several galactic structural features which have yet to be modeled and which may be tractable to the copycat model corrected with star counts are identified.

Bahcall, John N.↗

The role of drifts in diffusive shock acceleration

The role played by shock-associated drifts during the diffusive acceleration of charged particles at collisionless MHD shocks is evaluated. In the rest frame of the shock, the total energy gained by a particle is shown to result from two coupled acceleration mechanisms, the usual first-order Fermi mechanism and the drift mechanism. When averaged over a distribution of particles, the ratio of the drift-associated energy gain to the total energy is found to be independent of the total energy at a given theta1 (the angle between the shock normal and the unperturbed upstream magnetic field) in agreement with theoretical predictions. No evidence is found for drift-associated deceleration, suggesting that drifts always augment acceleration.

Decker, R. B.↗

Estimating residual fault hitting rates by recapture sampling

For the recapture debugging design introduced by Nayak (1988) the problem of estimating the hitting rates of the faults remaining in the system is considered. In the context of a conditional likelihood, moment estimators are derived and are shown to be asymptotically normal and fully efficient. Fixed sample properties of the moment estimators are compared, through simulation, with those of the conditional maximum likelihood estimators. Properties of the conditional model are investigated such as the asymptotic distribution of linear functions of the fault hitting frequencies and a representation of the full data vector in terms of a sequence of independent random vectors. It is assumed that the residual hitting rates follow a log linear rate model and that the testing process is truncated when the gaps between the detection of new errors exceed a fixed amount of time.

Lee, Larry↗