Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NEUTRON SCIENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Measurement of porosity in a composite high explosive as a function of pressing conditions by ultra-small-angle neutron scattering with contrast variation

We have used ultra-small-angle neutron scattering (USANS) with contrast variation to measure the porosity (voids and binder-filled regions) in a composite high explosive, PBX 9501, formulated with a deuterated binder. Little is known about the microstructure of pressed PBX 9501 parts and thus how it is affected by processing. Here, we explore the effect of varying the pressing intensity on the PBX 9501 microstructure. Disk-shaped samples of PBX 9501 were die-pressed with applied pressures ranging between 10,000 and 29,000 psi at 90 C. Five samples were prepared at each pressure that differed in the fraction of deuterated binder, facilitating variation of the neutron scattering length density contrast ({Delta}{rho}) and thus, the resolution of microstructural details. The sample composition was determined by calculation of the Porod Invariant as a function of {Delta}{rho} and compared with compositional estimates obtained from the bulk sample density. Structural modeling of the USANS data, at different levels of contrast, assuming both spherical and cylindrical morphologies, allowed the mean size and size distribution of voids and binder-filled regions to be determined. A decrease in the mean diameter of binder-filled regions was found with increasing pressing intensity, while the mean void diameter showed no significant change.

36 MATERIALS SCIENCE↗

Ultrawide Temperature Range Super-Invar Behavior of R 2 (Fe,Co) 17 Materials ( R = Rare Earth)

Super Invar (SIV), i.e., zero thermal expansion of metallic materials underpinned by magnetic ordering, is of great practical merit for a wide range of high precision engineering. However, the relatively narrow temperature window of SIV in most materials restricts its potential applications in many critical fields. Here, we demonstrate the controlled design of thermal expansion in a family of R 2 (Fe,Co) 17 materials (R=rare Earth). We find that adjusting the Fe-Co content tunes the thermal expansion behavior and its optimization leads to a record-wide SIV with good cyclic stability from 3–461 K, almost twice the range of currently known SIV. In situ neutron diffraction, Mössbauer spectra and first-principles calculations reveal the 3d bonding state transition of the Fe-sublattice favors extra lattice stress upon magnetic ordering. On the other hand, Co content induces a dramatic enhancement of the internal molecular field, which can be manipulated to achieve “ultrawide” SIV over broad temperature, composition and magnetic field windows. Furthermore, these findings pave the way for exploiting thermal-expansion-control engineering and related functional materials.

36 MATERIALS SCIENCE↗

Theoretical investigation of the vibrational properties of BeH{sub 2} and Li{sub 2}BeH{sub 4}.

First-principles calculations of BeH{sub 2} and Li{sub 2}BeH{sub 4} were performed and compared to inelastic neutron scattering. The crystal structure (P2{sub 1}/c space group) of Li{sub 2}BeH{sub 4} contains BeH{sub 4} tetrahedral units similar to those in {alpha}-BeH{sub 2} (Ibam space group) but separated from each other by Li atoms. Calculated vibrational density of states revealed the origin of the observed major vibrational modes. Charge-density maps and electronic density of states indicate interplay between covalent and ionic bondings in Li{sub 2}BeH{sub 4} and provide a better understanding of the nature of the bonding in these materials.

36 MATERIALS SCIENCE↗

World's Largest Gold Crystal Studied at Los Alamos

When geologist John Rakovan needed better tools to investigate whether a dazzling 217.78-gram piece of gold was in fact the world's largest single-crystal specimen - a distinguishing factor that would not only drastically increase its market value but also provide a unique research opportunity - he traveled to Los Alamos National Laboratory's Lujan Neutron Scattering Center to peer deep inside the mineral using neutron diffractometry. Neutrons, different from other probes such as X-rays and electrons, are able to penetrate many centimeters deep into most materials. Revealing the inner structure of a crystal without destroying the sample - imperative, as this one is worth an estimated $1.5 million - would allow Rakovan and Lujan Center collaborators Sven Vogel and Heinz Nakotte to prove that this exquisite nugget, which seemed almost too perfect and too big to be real, was a single crystal and hence a creation of nature. Its owner, who lives in the United States, provided the samples to Rakovan to assess the crystallinity of four specimens, all of which had been found decades ago in Venezuela.

36 MATERIALS SCIENCE↗

Melt-cast organic glasses as high-efficiency fast neutron scintillators

In this work we report a new class of organic-based scintillators that combines several of the desirable attributes of existing crystalline, liquid, and plastic organic scintillators. The prepared materials may be isolated in single crystalline form or melt-cast to produce highly transparent glasses that have been shown to provide high light yields of up to 16,000 photons/MeVee, as evaluated against EJ-200 plastic scintillators and solution-grown trans -stilbene crystals. The prepared organic glasses exhibit neutron/gamma pulse-shape discrimination (PSD) and are compatible with wavelength shifters to reduce optical self-absorption effects that are intrinsic to pure materials such as crystalline organics. In conclusion, the combination of high scintillation efficiency, PSD capabilities, and facile scale-up via melt-casting distinguishes this new class of amorphous materials from existing alternatives.

36 MATERIALS SCIENCE↗

Characterization of a collimated neutron imager for low-rate fast neutron imaging

Spatial localization of special nuclear materials (SNM) via their neutron signatures amidst background requires knowledge of the background neutron environment or a means of separating a source from background based on low amounts of information. This requirement has created the need for characterizing the spatial distribution of the cosmogenic neutron background. Neutron scatter cameras have been developed and optimized for rapid detection of high activity sources, but have low imaging efficiency, making it difficult to use them to characterize low rate diffuse sources, such as the neutron background. The Low Intensity Neutron Imaging System (LINIS) is a collimated neutron imager that has been designed and optimized for imaging diffuse cosmogenic neutron background in the energy range of 0.5–15 MeV. LINIS operates using 16 liquid scintillation detectors shielded by ultra-high molecular weight polyethylene cylindrical collimators in a staggered orientation and rotates to 7 discrete positions, giving it roughly 2π sensitivity. Finally, LINIS has been characterized using (α, n) and fission neutron sources using two imaging techniques for neutron source localization, simple backprojection and Maximum Likelihood Expectation Maximization.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Irradiation-enhanced α' precipitation in model FeCrAl alloys

We have irradiated the model FeCrAl alloys with varying compositions (Fe(10–18)Cr(10–6)Al at.%) with a neutron at ~ 320 to damage levels of ~ 7 displacements per atom (dpa) to investigate the compositional influence on the formation of irradiation-induced Cr-rich α' precipitates using atom probe tomography. In all alloys, significant number densities of these precipitates were observed. Cluster compositions were investigated and it was found that the average cluster Cr content ranged between 51.1 and 62.5 at.% dependent on initial compositions. Furthermore, this is significantly lower than the Cr-content of α' in binary FeCr alloys. As a result, significant partitioning of the Al from the α' precipitates was also observed.

36 MATERIALS SCIENCE↗

3D Printing with Mixed Powders of Boron Carbide and Al Alloy

Laser additive manufacturing with mixed powders of boron carbide and aluminum alloy is investigated. Parameters such as laser power, scan speed, scan pattern, and hatching space are systematically evaluated and optimized to obtain the desired density and porosity. These results show that the AM part contains 20 wt% boron carbide and 80 wt% aluminum alloy, which are well mixed and synthesized during the melting process. Its mechanical properties are close to those of aluminum. A thin-wall structure based two dimensional and three dimensional radial collimators were fabricated with well-controlled geometry for neutron scattering measurement.

36 MATERIALS SCIENCE↗

In situ investigation of stress-induced martensitic transformation in granular shape memory ceramic packings

Stress-induced martensitic transformation can occur in granular shape memory materials when individual particles experience high stresses and transform from a high-symmetry austenite phase to a low-symmetry martensite phase. This involves a highly heterogeneous distribution of the driving force and very low mechanical constraint for martensite nucleation, so the transformation behavior can be dramatically different from the well-documented case of monolithic solids. In this work, we investigate the stress-induced martensitic transformation in granular shape memory ceramic packings, which consist of single-crystal micro-particles of ZrO 2 -12 at%CeO 2 and ZrO 2 -15 at%CeO 2 . Using in situ neutron diffraction, we study how the phase fraction, lattice strain, and integral peak broadness evolve during external loading, unloading, and subsequent heating. Several peculiar features are discovered, including (i) a continuous mode of transformation with a wide range of transformation loads, (ii) co-evolution of the packing structure, contact deformation, and martensitic transformation, and (iii) a strong correlation between the peak broadening and the transformed phase fraction. In addition, we show the first direct evidence of reversible stress-induced martensitic transformation in granular materials. We additionally discuss the mechanism for martensite nucleation and growth in granular packings and show how that leads to the observed transformation characteristics.

36 MATERIALS SCIENCE↗

Transparent plastic scintillators for neutron detection based on lithium salicylate

Transparent plastic scintillators with pulse shape discrimination containing 6 Li salicylate have been synthesized by bulk polymerization with a maximum 6 Li loading of 0.40 wt%. Photoluminescence and scintillation responses to gamma-rays and neutrons are reported in this paper. Plastics containing 6 Li salicylate exhibit higher light yields and permit a higher loading of 6 Li as compared to previously reported plastics based on lithium 3-phenylsalicylate. However, pulse shape discrimination performance is reduced in lithium salicylate plastics due to the requirement of adding more nonaromatic monomers to the polymer matrix as compared to those based on lithium 3-phenylsalicylate. Finally, reduction in light yield and pulse shape discrimination performance in lithium-loaded plastics as compared to pulse shape discrimination plastics without lithium is interpreted in terms of energy transfer interference by the aromatic lithium salts.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Capillary transport of water through textile-reinforced concrete applied in repairing and/or strengthening cracked RC structures

The use of textile-reinforced concrete (TRC) has great potential for innovative solutions in repairing, protecting, and strengthening concrete and RC structures. The article at hand reports on an investigation on composite concrete specimens made of cracked ordinary concrete as substrate and textile-reinforced concrete (TRC) as a cover layer for its strengthening and repair. The TRC cover layer was assessed with regard to its effectiveness as a protective layer against the ingress of water through capillary action. Since in real applications such TRC layers may be cracked or presumed to be so, thereby activating the load-carrying function of the textile reinforcement, the TRC layer was cracked for purposes of this study. The water transport in the cracked ordinary concrete specimens without the TRC layer was used as a reference. Gravimetric measurements and neutron radiography served as the testing techniques. In ordinary concrete quick and deep ingress of water through relatively wide macro-cracks of approximately 100 μm width, followed by transport through the capillary pore system, caused saturation of large areas in a rather short time. TRC applied to the RC surface reduced the ingress of water to a large extent. Its small crack widths of 15 to 20 μm changed suction behaviour fundamentally. In the cracked substrate of ordinary concrete, capillary suction was prevented, and transport through the pore system of the matrix became the prevailing transport mechanism of capillary action. Not only was the mechanism altered, but the transport of water deep into inner regions was markedly retarded as well.

36 MATERIALS SCIENCE↗

Anisotropic storage medium development in a full-scale, sodium alanate-based, hydrogen storage system

Deuterium desorption in an automotive-scale hydrogen storage tube was studied in-situ using neutron diffraction. Gradients in the concentration of the various alanate phases were observed along the length of the tube but no significant radial anisotropy was present. In addition, neutron radiography and computed tomography showed large scale cracks and density fluctuations, confirming the presence of these structures in an undisturbed storage system. These results demonstrate that large scale storage structures are not uniform even after many absorption/desorption cycles and that movement of gaseous hydrogen cannot be properly modeled by a simple porous bed model. In addition, the evidence indicates that there is slow transformation of species at one end of the tube indicating loss of catalyst functionality. These observations explain the unusually fast movement of hydrogen in a full scale system and shows that loss of capacity is not occurring uniformly in this type of hydrogen-storage system.

08 HYDROGEN↗

Microstructural and micromechanical characterization of IN718 theta shaped specimens built with electron beam melting

Theta-shaped specimens were additively manufactured out of Inconel 718 powders using an electron beam melting technique, as a model complex load bearing structure. We employed two different build strategies; producing two sets of specimens. Microstructural and micro-mechanical characterizations were performed using electron back-scatter, synchrotron x-ray and in-situ neutron diffraction techniques. In particular, the cross-members of the specimens were the focus of the synchrotron x-ray and in-situ neutron diffraction measurements. The build strategies employed resulted in the formation of distinct microstructures and crystallographic textures, signifying the importance of build-parameter manipulation for microstructural optimization. Large strain anisotropy of the different lattice planes was observed during in-situ loading. Texture was concluded to have a distinct effect upon both the axial and transverse strain responses of the cross-members. In particular, the (200), (220) and (420) transverse lattice strains all showed unexpected overlapping trends in both builds. This was related to the strong {200} textures along the build/loading direction, providing agreement between the experimental and calculated results.

36 MATERIALS SCIENCE↗

Internal curing of cement pastes by means of superabsorbent polymers visualized by neutron tomography

Highlights: • The kinetics of water release from SAPs were studied by neutron tomography. • The time window for internal curing was linked to the water release from SAPs. • The water release links to the SAP effectiveness to mitigate autogenous shrinkage. • One SAP type was effective while another prematurely released its stored water. Superabsorbent polymers (SAPs) are used to counteract self-desiccation in order to mitigate autogenous shrinkage, a problem in cementitious systems with a low water-to-cement ratio. The release kinetics during internal curing are of importance as not all SAP types are able to efficiently mitigate autogenous shrinkage. In this study, neutron tomography is used to study and visualize the water release kinetics over time. Per-voxel analysis of the time-attenuation curve was performed using piecewise-constant functions. Two different SAP types were studied, one being able to mitigate autogenous shrinkage and one quickly releasing its stored water after final setting. The tomography results correspond to autogenous shrinkage measurements and nuclear magnetic resonance tests. The visualization provides information on the time of water release by the SAPs after setting and the time window of internal curing. This opens additional insights towards the application of SAPs in the construction sector and provides information on the mechanism of internal curing.

36 MATERIALS SCIENCE↗

Assessing the influence of microstructure on uranium hydride size distributions via small angle neutron scattering

Here, the effect of microstructure on the internal hydriding behavior of both cast (1 mm grain size) and rolled (25 μm grain size) uranium containing hydrogen concentrations between 0 and 1.8 wppm were evaluated via small angle neutron scattering (SANS). Increasing hydrogen content up to 1.8 wppm in the cast uranium only weakly affected the average uranium hydride (UH 3 ) precipitate size, calculated from the SANS data. Conversely, the UH 3 phase fraction was found to strongly depend on the hydrogen content in the same cast samples. A substantially reduced UH 3 particle size distribution was observed in the rolled uranium relative to cast uranium containing the same nominal hydrogen content. It is hypothesized that the suppression of UH 3 formation in the rolled uranium is driven by increased hydrogen trapping at grain boundaries, and theoretical calculations that account for trap density, potency, and hydrogen diffusion kinetics support this hypothesis.

36 MATERIALS SCIENCE↗

Optimizing the spatial resolution and gamma discrimination of SiPM-based Anger cameras

SiPM Anger cameras have been designed for use as 2-dimensional thermal neutron detectors for scientific applications such as at single crystal diffraction instruments. These cameras utilize a neutron sensitive scintillator and an array of SiPM photosensors, separated by a light spreading glass. While this optics package is very effective at detecting and positioning neutrons, it is also sensitive to gamma rays, which are a source of unwanted noise. In this work, we underwent a search of scintillator and spreader glass thicknesses to determine the optimal combination for maximizing spatial resolution. Both experimental results and GEANT4 simulations are presented. Further, to address the issue of gamma ray detection, we have also designed and presented a multi-layer scintillator that reduces the amount of scintillation light produced via gamma-ray energy deposition, allowing for easier pulse-height discrimination. A sample of this geometry has been produced that results in a factor of 2 improvement over an equivalent thickness monolithic scintillator.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structural phase transitions in BaPrO{sub 3}

The crystal structures adopted by BaPrO{sub 3} at and above ambient temperature have been examined using a combination of synchrotron X-ray and neutron diffraction. BaPrO{sub 3} has been established to undergo a series of phase transitions from Pbnmorthorhombic{yields}Ibmmorthorhombic{yields}R3-bar crhombohedral{yields}Pm3-barm cubic. BaPrO{sub 3} is the second A{sup 2+}B{sup 4+}O{sub 3} perovskite found to adopt rhombohedral symmetry in preference to the I4/mcm tetragonal structure. Analysis of the octahedral tilting through the rhombohedral to cubic phase transition indicates that this transformation is continuous and tricritical in nature. The tricritical behaviour of this transition is likely to be a result of the competition between tetragonal and rhombohedral structures to be the preferred phase, with the rhombohedral symmetry adopted by BaPrO{sub 3} being stabilised by the unusually large B-site cation.

36 MATERIALS SCIENCE↗