SEARCH · Engineering Papers

Results for “Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

All sources NASA NTRS DOE OSTI

NASA NTRS1989

On the applications of algebraic grid generation methods based on transfinite interpolation

Algebraic grid generation methods based on transfinite interpolation called the two-boundary and four-boundary methods are applied for generating grids with highly complex boundaries. These methods yield grid point distributions that allow for accurate application to regions of sharp gradients in the physical domain or time-dependent problems with small length scale phenomena. Algebraic grids are derived using the two-boundary and four-boundary methods for applications in both two- and three-dimensional domains. Grids are developed for distinctly different geometrical problems and the two-boundary and four-boundary methods are demonstrated to be applicable to a wide class of geometries.

Nguyen, Hung Lee↗

NASA NTRS1988

Multigrid method for stability problems

The problem of calculating the stability of steady state solutions of differential equations is treated. Leading eigenvalues (i.e., having maximal real part) of large matrices that arise from discretization are to be calculated. An efficient multigrid method for solving these problems is presented. The method begins by obtaining an initial approximation for the dominant subspace on a coarse level using a damped Jacobi relaxation. This proceeds until enough accuracy for the dominant subspace has been obtained. The resulting grid functions are then used as an initial approximation for appropriate eigenvalue problems. These problems are being solved first on coarse levels, followed by refinement until a desired accuracy for the eigenvalues has been achieved. The method employs local relaxation on all levels together with a global change on the coarsest level only, which is designed to separate the different eigenfunctions as well as to update their corresponding eigenvalues. Coarsening is done using the FAS formulation in a non-standard way in which the right hand side of the coarse grid equations involves unknown parameters to be solved for on the coarse grid. This in particular leads to a new multigrid method for calculating the eigenvalues of symmetric problems. Numerical experiments with a model problem demonstrate the effectiveness of the method proposed. Using an FMG algorithm a solution to the level of discretization errors is obtained in just a few work units (less than 10), where a work unit is the work involved in one Jacobi relization on the finest level.

Taasan, Shlomo↗

NASA NTRS1988

Modified independent modal space control method for active control of flexible systems

A modified independent modal space control (MIMSC) method is developed for designing active vibration control systems for large flexible structures. The method accounts for the interaction between the controlled and residual modes. It incorporates also optimal placement procedures for selecting the optimal locations of the actuators in the structure in order to minimize the structural vibrations as well as the actuation energy. The MIMSC method relies on an important feature which is based on time sharing of a small number of actuators, in the modal space, to control effectively a large number of modes. Numerical examples are presented to illustrate the application of the method to generic flexible systems. The results obtained suggest the potential of the devised method in designing efficient active control systems for large flexible structures.

Baz, A.↗

NASA NTRS1988

Some notes on applying the one-step multiconic method of trajectory propagation

The one-step multiconic method (also called the pseudostate method) has been known for years to offer up to an order of magnitude of improvement over the patched-conic method for propagating trajectories under the gravitational influence of two bodies. In these notes, the method and some of its variations are described. Then, a crucial parameter of this method, the sweepback duration, is examined, and it is shown that the traditional wisdom concerning this parameter should be replaced by an algorithm which relates it to the trajectory characteristics. Remarkably, this algorithm is independent of the masses of the primary and secondary bodies.

Sweetser, Theodore H., III↗

NASA NTRS1988

Recursive algorithms for vector extrapolation methods

Three classes of recursion relations are devised for implementing some extrapolation methods for vector sequences. One class of recursion relations can be used to implement methods like the modified minimal polynomial extrapolation and the topological epsilon algorithm; another allows implementation of methods like minimal polynomial and reduced rank extrapolation; while the remaining class can be employed in the implementation of the vector E-algorithm. Operation counts and storage requirements for these methods are also discussed, and some related techniques for special applications are also presented. Included are methods for the rapid evaluations of the vector E-algorithm.

Ford, William F.↗

NASA NTRS1989

Modified independent modal space control method for active control of flexible systems

Baz, A.↗

NASA NTRS1989

Moment method with isoparametric elements for three-dimensional anisotropic scatterers

A novel method for computing the frequency-domain electromagnetic fields scattered from, and penetrating into, arbitrarily shaped, three-dimensional, lossy, inhomogeneous anisotropic scatters is presented. The method is based on a general volume integrodifferential formulation of the scattering problem and consists of the numerical solution of the coupled integral equations by the moment method and point matching. The numerical model of the scatterer is obtained by parametric volume elements, and the basis functions used to represent the field within each element are the same used in the finite-element method. Element integration problems due to the singular kernel of the integral equations are treated in some detail. Numerical results for both the isotropic and the anisotropic spherical scatterer are presented, including comparisons with results obtained by different numerical methods for the isotropic cases considered. The capability of the numerical code presented to deal with cases where the material parameters of the scatterer are given by singular matrices is discussed for two particular examples.

Graglia, Roberto D.↗

NASA NTRS1989

International Conference on Numerical Methods in Fluid Dynamics, 11th, Williamsburg, VA, June 27-July 1, 1988, Proceedings

Recent advances in computational fluid dynamics (CFD) are discussed in reviews and reports. Topics addressed include CFD models in plasma dynamics, parallel computation for simulation studies, CFD for hypersonic airbreathing aircraft, multigrid methods for the steady incompressible Navier-Stokes equations, upwind differencing techniques, TV stable schemes for shock-interacting flows, Euler models of hypersonic vortex flows, parallel multilevel adaptive methods, and vortex methods for slightly viscous three-dimensional flows. Consideration is given to the accuracy of node-based solutions on irregular meshes, multigrid calculations for cascades, a finite-volume-element method for planar cavity flow, parallel heterogeneous mesh refinement for advection-diffusion equations, the convergence of the spectral-viscosity method for nonlinear conservation laws, and numerical simulations of Taylor vortices in a spherical gap.

Dwoyer, D. L.↗

NASA NTRS1989

A high-order Lagrangian-decoupling method for the incompressible Navier-Stokes equations

A high-order Lagrangian-decoupling method is presented for the unsteady convection-diffusion and incompressible Navier-Stokes equations. The method is based upon: (1) Lagrangian variational forms that reduce the convection-diffusion equation to a symmetric initial value problem; (2) implicit high-order backward-differentiation finite-difference schemes for integration along characteristics; (3) finite element or spectral element spatial discretizations; and (4) mesh-invariance procedures and high-order explicit time-stepping schemes for deducing function values at convected space-time points. The method improves upon previous finite element characteristic methods through the systematic and efficient extension to high order accuracy, and the introduction of a simple structure-preserving characteristic-foot calculation procedure which is readily implemented on modern architectures. The new method is significantly more efficient than explicit-convection schemes for the Navier-Stokes equations due to the decoupling of the convection and Stokes operators and the attendant increase in temporal stability. Numerous numerical examples are given for the convection-diffusion and Navier-Stokes equations for the particular case of a spectral element spatial discretization.

Ho, Lee-Wing↗

NASA NTRS1989

Shock capturing by the spectral viscosity method

A main disadvantage of using spectral methods for nonlinear conservation laws lies in the formation of Gibbs phenomenon, once spontaneous shock discontinuities appear in the solution. The global nature of spectral methods than pollutes the unstable Gibbs oscillations overall the computational domain, and the lack of entropy dissipation prevents convergences in these cases. The Spectral Viscosity method, which is based on high frequency dependent vanishing viscosity regularization of the classical spectral methods is discussed. It is shown that this method enforces the convergence of nonlinear spectral approximations without sacrificing their overall spectral accuracy.

Tadmor, Eitan↗

NASA NTRS1989

Comparison of analytical methods for calculation of wind loads

The following analysis is a comparison of analytical methods for calculation of wind load pressures. The analytical methods specified in ASCE Paper No. 3269, ANSI A58.1-1982, the Standard Building Code, and the Uniform Building Code were analyzed using various hurricane speeds to determine the differences in the calculated results. The winds used for the analysis ranged from 100 mph to 125 mph and applied inland from the shoreline of a large open body of water (i.e., an enormous lake or the ocean) a distance of 1500 feet or ten times the height of the building or structure considered. For a building or structure less than or equal to 250 feet in height acted upon by a wind greater than or equal to 115 mph, it was determined that the method specified in ANSI A58.1-1982 calculates a larger wind load pressure than the other methods. For a building or structure between 250 feet and 500 feet tall acted upon by a wind rangind from 100 mph to 110 mph, there is no clear choice of which method to use; for these cases, factors that must be considered are the steady-state or peak wind velocity, the geographic location, the distance from a large open body of water, and the expected design life and its risk factor.

Minderman, Donald J.↗

NASA NTRS1990

Cell averaging Chebyshev methods for hyperbolic problems

A cell averaging method for the Chebyshev approximations of first order hyperbolic equations in conservation form is described. Formulas are presented for transforming between pointwise data at the collocation points and cell averaged quantities, and vice-versa. This step, trivial for the finite difference and Fourier methods, is nontrivial for the global polynomials used in spectral methods. The cell averaging methods presented are proven stable for linear scalar hyperbolic equations and present numerical simulations of shock-density wave interaction using the new cell averaging Chebyshev methods.

Wei, Cai↗

NASA NTRS1990

Comparison of satellite based cloud retrieval methods for cirrus and stratocumulus

One difficulty in using satellite remote sensing data is the spatial variability of cloud properties on scales smaller than most meteorological satellite fields of view (approx. 4 to 8 km). The variation is examined of satellite derived cloud cover as a function of the satellite sensor spatial resolution for seven cloud cover retrieval methods: (1) Reflectance threshold; (2) Temperature threshold; (3) ISCCP; (4) HBTM (Hybrid Bispectral Threshold Method); (5) NCLE; (6) Spatial coherence; and (7) Functional Box Counting. The first two methods are simple single spectral thresholds which specify a satellite pixel as cloud filled if the measured reflectance is greater than the threshold, or if the measured equivalent blackbody temperature is less than the threshold. The next three methods are bispectral, using one visible wavelength window channel and one thermal infrared wavelength window. The final two algorithms rely on the spatial variability within the cloud field to determine cloud cover. Spatial coherence assumes only that the cloud field occurs in a single layer and that the clouds are optically thick in the infrared window. LANDSAT Thematic Mapper (TM) data is used to test the spatial resolution dependence of the cloud algorithms. The ISCCP bispectral threshold applied to the full resolution data is used as the reference or truth cloud cover, after which the retrieval methods are applied to the spatial resolutions. Studies of the fraction of pixels in the scene at cloud edge, and of the profile of reflectance and temperature near cloud edges indicate an uncertainty in the reference cloud fraction of 1 to 5 percent.

Parker, Lindsay↗

NASA NTRS1989

An improved boundary force method for analysing cracked anisotropic materials

The Boundary Force Method (BFM), a form of indirect boundary element method, is used to analyze composite laminates with cracks. The BFM uses the orthotropic elasticity solution for a concentrated horizontal and vertical force and a moment applied at a point in a cracked, infinite sheet as the fundamental solution. The necessary stress functions for this fundamental solution were formulated using the complex variables theory of orthotropic elasticity. The current method is an improvement over a previous method using only forces and no moment. The improved method was verified by comparing it to accepted solutions for a finite-width, center-crack specimen subjected to uniaxial tension. Four graphite/epoxy laminates were used: (0 + or - 45/90)sub s, (0), (+ or - 45)sub s, and (+ or - 30)sub s. The BFM results agreed well with accepted solutions. Convergence studies showed that with the addition of the moment in the fundamental solution, the number of boundary elements required for a converged solution was significantly reduced. Parametric studies were done for two configurations for which no orthotropic solutions are currently available; a single edge crack and an inclined single edge crack.

Tan, P. W.↗

NASA NTRS1989

Advancements in frequency-domain methods for rotorcraft system identification

A new method for frequency-domain identification of rotorcraft dynamics is presented. Nonparametric frequency-response identification and parametric transfer-function modeling methods are extended to allow the extraction of state-space (stability and control derivative) representations. An interactive computer program DERIVID is described for the iterative solution of the multi-input/multi-output frequency-response matching approach used in the identification. Theoretical accuracy methods are used to determine the appropriate model structure and degree-of-confidence in the identified parameters. The method is applied to XV-15 tilt-rotor aircraft data in hover. Bare-airframe stability and control derivatives for the lateral/directional dynamics are shown to compare favorably with models previously obtained using time-domain identification methods and the XV-15 simulation program.

Tischler, Mark B.↗

NASA NTRS1989

'Nose method' of calculating critical cooling rates for glass formation

The use of the so-called 'nose method' for computing critical cooling rates for glass formation is examined and compared with other methods, presenting data for the glass-forming systems SiO2, GeO2, and P2O5. It is shown that, for homogeneous crystallization, the nose-method will give an overestimate of Rc, a conclusion which was drawn after assessing the enfluence of a range of values for the parameters which control crystal growth and nucleation. The paper also proposes an alternative simple procedure (termed the 'cutoff method') for computing critical cooling rates from T-T-T diagrams, which was shown in the SiO2 and GeO2 systems to be superior to the nose method.

Weinberg, Michael C.↗

NASA NTRS1989

Parallel iterative methods for sparse linear and nonlinear equations

As three-dimensional models are gaining importance, iterative methods will become almost mandatory. Among these, preconditioned Krylov subspace methods have been viewed as the most efficient and reliable, when solving linear as well as nonlinear systems of equations. There has been several different approaches taken to adapt iterative methods for supercomputers. Some of these approaches are discussed and the methods that deal more specifically with general unstructured sparse matrices, such as those arising from finite element methods, are emphasized.

Saad, Youcef↗

NASA NTRS1990

Limitations of the method of characteristics when applied to axisymmetric hypersonic nozzle design

A design study of axisymmetric hypersonic wind tunnel nozzles was initiated by NASA Langley Research Center with the objective of improving the flow quality of their ground test facilities. Nozzles for Mach 6 air, Mach 13.5 nitrogen, and Mach 17 nitrogen were designed using the Method of Characteristics/Boundary Layer (MOC/BL) approach and were analyzed with a Navier-Stokes solver. Results of the analysis agreed well with design for the Mach 6 case, but revealed oblique shock waves of increasing strength originating from near the inflection point of the Mach 13.5 and Mach 17 nozzles. The findings indicate that the MOC/BL design method has a fundamental limitation that occurs at some Mach number between 6 an 13.5. In order to define the limitation more exactly and attempt to discover the cause, a parametric study of hypersonic ideal air nozzles designed with the current MOC/BL method was done. Results of this study indicate that, while stagnations conditions have a moderate affect on the upper limit of the method, the method fails at Mach numbers above 8.0.

Edwards, Anne C.↗