Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MINERALOGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Ceramic Plugs for Deep Borehole Seals - 17316

In the deep borehole nuclear waste disposal concept, waste packages are emplaced deep in crystalline rock formations under conditions of high pressures, high mineral content water, and elevated temperatures. Well seals and plugs must perform for thousands of years. A novel ceramic plug system under development capitalizes on the thermal energy of thermite mixtures and engineered additives to react and form ceramic-like plugs in place with favorable structural, flow, and geochemical properties. Depending on the ingredients, the reaction can produce aluminosilicates, plagioclase feldspars, or other combinations in crystalline or amorphous forms. Normative mineralogy techniques were applied to predict product mineralogy and evaluate compatibility with host rocks, and showed they are comparable to igneous rock analogs. The results support a tentative geochemical compatibility between these formulations and granitic host rock. Because the reaction produces a significant amount of thermal energy, the thermal/structural/fluid response of the plug and surrounding media was evaluated with the FEHM code. Temperatures near the plug/rock interface are estimated to peak at less than 600 deg. C and cool to near ambient temperature within a day. Rock stresses resulting from the thermal pulse are predicted to be similar to the unconfined compressive strength of granites, and generally lower than triaxial test results. Entrained fluid expansion due to heating was shown to be lower than failure stresses. Little or no failure in the surrounding media would be expected due to the plug formation process. The present efforts are focused on refining the material formulations, evaluating the geochemical and mechanical interactions between the plug and host rock, and testing the plug formation process in scaled granite and basalt masses. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Behaviour of Alpha Emitters in Cement - 16139

Alpha emitting radioelements can interact with cements in a number of ways. Alpha-radiolysis of water produces hydrogen that may pressurise and damage the structure, and it is postulated that the intense alpha radiation field around waste particles containing high alpha activity can cause mineralogical changes in the hydration products. In addition, their solubility in cement pore fluid can be increased by complexation with organic materials such as the degradation products of cellulose, which itself may be promoted by alpha irradiation. Analysis of pore fluid expressed from cements containing plutonium and a range of organic materials has demonstrated their effect on plutonium solubility. Calculations of hydrogen pressurisation as a result of alpha radiolysis suggest that radiolytic hydrogen will not exceed tensile strength of the cement. Further work is described in which cements containing high loadings of plutonium will be examined in the NNL Central Laboratory to investigate mineralogical changes during and after hydration. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Evaluation of Drilling Performance at The Geysers with Machine Learning Methods Using Geologic Data

A recent well, GDC-36, was drilled in The Geysers Geothermal Field served in a Department of Energy-industry to demonstrate improved drilling performance with polycrystalline diamond compact (PDC) bits. Both PDC and roller cone drill bits were used to drill this well. Key challenges encountered during drilling included lost circulation in the mud-drilled section, and bit damage interfacial severity in the deeper, air-drilled section. The objective of this study is to evaluate the drilling performance in relation to the local geological characteristics using machine learning methods. By applying K-clustering to the sonic log data, we were able to identify areas correlated with measured lost circulation. Also, the boundaries defined by clustering of the mineralogical and lithological data from the mud logs correlate well with interfacial severity during drilling. A random forest model was employed to build correlation between drilling data and rock strength. The confined compressive strength (CCS) of the rock in the training of the machine learning model was inferred from the dipole sonic log. The R-squared of the testing data is 0.78, and the RMSE (Root Mean Squared Error) is 0.06. The trained model was used to forecast rock strength for the section where sonic log data are not available. CCS could also be inferred from mud logs provided the relationship between mineralogy and rock strength is established through core testing data.

15 GEOTHERMAL ENERGY↗

Thenature of marbled Terra Sigillata slips: a combined mu XRF and mu XRD investigation

In addition to the red terra sigillata production, the largest Gallic workshop (La Graufesenque) made a special type of terra sigillata, called 'marbled' by the archaeologists. Produced exclusively on this site, this pottery is characterized by a surface finish made of a mixture of yellow and red slips. Because the two slips are intimately mixed, it is difficult to obtain the precise composition of one of the two constituents without contamination by the other. In order to obtain very precise correlation at the appropriate scale between the color aspect and the element and mineralogical phase distributions in the slip, combined electron microprobe, x-ray micro spectroscopies and micro diffraction on cross sectional samples were performed. The aim is to discover how potters were able to produce this unique type of terra sigillata and especially this slip showing an intense yellow color. Results show that the yellow component of marbled sigillata was made from a titanium-rich clay preparation. The color is related to the formation of a pseudobrookite (TiFe2O5) phase in the yellow part of the slip, the main characteristics of that structure being considered nowadays as essential for the fabrication of stable yellow ceramic pigments. Its physical properties such as high refractive indices and a melting point higher than that of most silicates widely used as ceramic colorants are indeed determinant for this kind of applications. Finally, the red parts have a similar composition (elementary and mineralogical) to the one of standard red slip.

36 MATERIALS SCIENCE↗

Biogenic iron oxyhydroxide formation at mid-ocean ridge hydrothermal vents: Juan de Fuca Ridge

Here we examine Fe speciation within Fe-encrusted biofilms formed during 2-month seafloor incubations of sulfide mineral assemblages at the Main Endeavor Segment of the Juan de Fuca Ridge. The biofilms were distributed heterogeneously across the surface of the incubated sulfide and composed primarily of particles with a twisted stalk morphology resembling those produced by some aerobic Fe-oxidizing microorganisms. Our objectives were to determine the form of biofilm-associated Fe, and identify the sulfide minerals associated with microbial growth. We used micro-focused synchrotron-radiation X-ray fluorescence mapping (mu XRF), X-ray absorption spectroscopy (mu EXAFS), and X-ray diffraction (mu XRD) in conjunction with focused ion beam (FIB) sectioning, and highresolution transmission electron microscopy (HRTEM). The chemical and mineralogical composition of an Fe-encrusted biofilm was queried at different spatial scales, and the spatial relationship between primary sulfide and secondary oxyhydroxide minerals was resolved. The Fe-encrusted biofilms formed preferentially at pyrrhotite-rich (Fe1-xS, 0<_ x<_ 0.2) regions of the incubated chimney sulfide. At the nanometer spatial scale, particles within the biofilm exhibiting lattice fringing and diffraction patterns consistent with 2-line ferrihydrite were identified infrequently. At the micron spatial scale, Fe mu EXAFS spectroscopy and mu XRD measurements indicate that the dominant form of biofilm Fe is a short-range ordered Fe oxyhydroxide characterized by pervasive edge-sharing Fe-O6 octahedral linkages. Double corner-sharing Fe-O6 linkages, which are common to Fe oxyhydroxide mineral structures of 2-line ferrihydrite, 6-line ferrihydrite, and goethite, were not detected in the biogenic iron oxyhydroxide (BIO). The suspended development of the BIO mineral structure is consistent with Fe(III) hydrolysis and polymerization in the presence of high concentrations of Fe-complexing ligands. We hypothesize that microbiologically produced Fe-complexing ligands may play critical roles in both the delivery of Fe(II) to oxidases, and the limited Fe(III) oxyhydroxide crystallinity observed within the biofilm. Our research provides insight into the structure and formation of naturally occurring, microbiologically produced Fe oxyhydroxide minerals in the deep-sea. We describe the initiation of microbial seafloor weathering, and the morphological and mineralogical signals that result from that process. Our observations provide a starting point from which progressively older and more extensively weathered seafloor sulfide minerals may be examined, with the ultimate goal of improved interpretation of ancient microbial processes and associated biological signatures.

54 ENVIRONMENTAL SCIENCES↗

THE WEATHERING OF A SULFIDE OREBODY: SPECIATION AND FATE OF SOME POTENTIAL CONTAMINANTS

Various potentially toxic trace elements such as As, Cu, Pb and Zn have been remobilized by the weathering of a sulfide orebody that was only partially mined at Leona Heights, California. As a result, this body has both natural and anthropogenically modified weathering profiles only 500 m apart. The orebody is located in a heavily urbanized area in suburban Oakland, and directly affects water quality in at least one stream by producing acidic conditions and relatively high concentrations of dissolved elements (e.g., {approx}500 mg/L Cu, {approx}3700 mg/L Zn). Micrometric-scale mineralogical investigations were performed on the authigenic metal-bearing phases (less than 10 {mu}m in size) using electron-probe micro-analysis (EPMA), micro-Raman, micro X-ray absorption spectroscopy (mXAS), scanning X-ray diffraction (mSXRD) and scanning X-ray fluorescence (mSXRF) mapping techniques. Those measurements were coupled with classical mineralogical laboratory techniques, X-ray diffraction (XRD) and scanning electron microscopy (SEM). Authigenic metal-bearing phases identified are mainly sulfates (jarosite, epsomite, schwertmannite), Fe (oxy-)hydroxides (goethite, hematite and poorly crystalline Fe products) and poorly crystalline Mn (hydr-)oxides. Sulfates and Fe (oxy-)hydroxides are the two main secondary products at both sites, whereas Mn (hydr-) oxides were only observed in the samples from the non-mining site. In these samples, the various trace elements show different affinities for Fe or Mn compounds. Lead is preferentially associated with Mn (hydr-)oxides and As with Fe (oxy-)hydroxides or sulfates. Copper association with Mn and Fe phases is questionable, and the results obtained rather indicate that Cu is present as individual Cu-rich grains (Cu hydroxides). Some ochreous precipitates were found at both sites and correspond to a mixture of schwertmannite, goethite and jarosite containing some potentially toxic trace elements such as Cu, Pb and Zn. According to the trace element distribution and relative abundance of the unweathered sulfides, this orebody still represents a significant reservoir of potential contaminants for the watershed, especially in the non-mining site, as a much greater proportion of sulfides is left to react and because of the lower porosity in this site.

54 ENVIRONMENTAL SCIENCES↗

Synthesis and structural characterization of ferrous trioctahedral smectites: Implications for clay mineral genesis and detectability on Mars

Widespread detections of phyllosilicates in Noachian terrains on Mars imply a history of near-surface fluid-rock interaction. Ferrous trioctahedral smectites are thermodynamically predicted products of basalt weathering on early Mars, but to date only Fe 3+ -bearing dioctahedral smectites have been identified from orbital observations. In general, the physicochemical properties of ferrous smectites are poorly studied because they are susceptible to air oxidation. In this study, eight Fe 2+ -bearing smectites were synthesized from Fe 2+ -Mg-Al silicate gels at 200°C under anoxic conditions. Samples were characterized by inductively coupled plasma optical emission spectrometry, powder X-ray diffraction, Fe K-edge X-ray absorption spectroscopy (XAS), Mössbauer spectroscopy, and visible/near-infrared (VNIR) reflectance spectroscopy. The range of redox states was Fe 3+ /ΣFe = 0 to 0.06 ± 0.01 as determined by both XAS and, for short integration times, Mössbauer. The smectites have 060 distances (d (060) ) between 1.53 and 1.56 Å, indicating a trioctahedral structure. d (060) and XAS-derived interatomic Fe-(Fe,Mg,Al) distance scaled with Fe content. Smectite VNIR spectra feature OH/H 2 O absorption bands at 1.4 and 1.9 µm, (Fe 2+ ,Mg,Al) 3 -OH stretching bands near 1.4 µm, and Fe 2+ Fe 2+ Fe 2+ -OH, MgMgMg-OH, AlAl(Mg,Fe 2+ )-OH, and AlAl-OH combination bands at 2.36 µm, 2.32 µm 2.25 µm, and 2.20 µm, respectively. The spectra for ferrous saponites are distinct from those for dioctahedral ferric smectites, permitting their differentiation from orbital observations. X-ray diffraction patterns for synthetic high-Mg ferrosaponite and high-Mg ferrian saponite are both consistent with the Sheepbed saponite detected by the chemistry and mineralogy (CheMin) instrument at Gale Crater, Mars, suggesting that anoxic basalt alteration was a viable pathway for clay mineral formation on early Mars.

58 GEOSCIENCES↗

Salinization of porewater in a multiple aquitard-aquifer system in Jiangsu coastal plain, China

Chemical and isotopic compositions were analyzed in porewater squeezed from a clayey aquitard in Jiangsu coastal plain, eastern China, to interpret the salinity origin, chemical evolution and water-mass mixing process. A strong geochemical fingerprint was obtained with an aligned Cl/Br ratio of 154 in the salinized aquitard porewater over a wide Cl{sup −} concentration range (396–9,720 mg/L), indicating that porewater salinity is likely derived from a mixing with old brine with a proportion of less than 20%. Very small contributions of brine exerted limited effects on water stable isotopes. The relationships between porewater δ{sup 18}O and δD indicate that shallow and intermediate porewaters could be original seawater and were subsequently diluted with modern meteoric water, whereas deep porewaters with depleted stable isotopic values were probably recharged during a cooler period and modified by evaporation and seawater infiltration. The cation–Cl relationship and mineralogy of associated strata indicate that porewater has been chemically modified by silicate weathering and ion-exchange reactions. {sup 87}Sr/{sup 86}Sr ratios of 0.7094–0.7112 further confirm the input source of silicate minerals. Numerical simulations were used to evaluate the long-term salinity evolution of the deep porewater. The alternations of boundary conditions (i.e., the third aquifer mixed with brine at approximately 70 ka BP, followed by recharge of glacial meltwater at 20–25 ka BP, and then mixing with Holocene seawater at 7–10 ka BP) are responsible for the shift in porewater salinity. These timeframes correspond with the results of previous studies on ancient marine transgression-regression in Jiangsu coastal plain.

58 GEOSCIENCES↗

Rock weathering controls the potential for soil carbon storage at a continental scale

Abstract As rock-derived primary minerals weather to form soil, they create reactive, poorly crystalline minerals that bind and store organic carbon. By implication, the abundance of primary minerals in soil might influence the abundance of poorly crystalline minerals, and hence soil organic carbon storage. However, the link between primary mineral weathering, poorly crystalline minerals, and soil carbon has not been fully tested, particularly at large spatial scales. To close this knowledge gap, we designed a model that links primary mineral weathering rates to the geographic distribution of poorly crystalline minerals across the USA, and then used this model to evaluate the effect of rock weathering on soil organic carbon. We found that poorly crystalline minerals are most abundant and most strongly correlated with organic carbon in geographically limited zones that sustain enhanced weathering rates, where humid climate and abundant primary minerals co-occur. This finding confirms that rock weathering alters soil mineralogy to enhance soil organic carbon storage at continental scales, but also indicates that the influence of active weathering on soil carbon storage is limited by low weathering rates across vast areas.

54 ENVIRONMENTAL SCIENCES↗

Macroscopic and molecular-scale assessment of soil lead contamination impacted by seasonal dove hunting activities

Environmental contamination of lead (Pb) in soils and sediments poses serious threats to human and ecological health. The objective of this study is to investigate the effect of seasonal dove sports hunting activities on Pb contamination in acid forest soils. A grid sampling method was used to investigate the spatial distribution of Pb contamination in surface soils. Soils were analyzed for total metal(loid) concentration and characterized for physicochemical properties and mineralogy. Adsorption isotherm experiments were also conducted to understand the reactivity and retention capacity of Pb(II) in soils. Finally, synchrotron-based X-ray microprobe and X-ray absorption spectroscopy were used to understand the chemical speciation of Pb that controls the retention/release mechanisms of Pb in soils. There was no excessive accumulation of Pb at the site. However, the concentration of Pb in surface soils was greater than the background level (<16 mg kg{sup -1}). The contamination level of Pb was as high as 67 mg kg{sup -1} near a patch of corn field where lime was frequently applied. A microfocused X-ray microprobe analysis showed the presence of Pb pellet fragments that predominantly contain oxidized Pb(II), suggesting that oxidative dissolution was occurring in soils. Dissolved Pb(II) can be readily retained in soils up to {approx}3,600 mg kg{sup -1} via inner-sphere and outer-sphere surface complexation on carbon and aluminol functional groups of soil components, suggesting that partitioning reactions control the concentration of Pb in soil solution. The fate of Pb is likely to be controlled by (1) oxidative dissolution process of Pb(0) pellets and (2) the release of outer-sphere and/or inner-sphere Pb surface complexes in humic substances and aluminosilicate/Al oxyhydroxides. Although no remedial actions are immediately required, the long-term accumulation of Pb in soils should be carefully monitored in protecting ecosystem and water quality at the dove hunting field.

54 ENVIRONMENTAL SCIENCES↗

Direct Carbothermic Reduction of Weathered Ilmenite for Efficient Removal of Iron by Leaching

The commercial processes to extract iron from ilmenite (FeTiO{sub 3}) essentially include energy-intensive methods, such as high-temperature reduction smelting or preoxidation, coupled with reduction by carbon. However, due to altered mineralogy of ilmenite caused by weathering at sea coast, the reduction of iron remains incomplete in either of these processes, demanding a high concentration of acid when used for extraction of high-purity TiO{sub 2} for high-end applications. We developed a process for the flux-catalyzed reduction of a partially weathered ilmenite ore of Indian origin. Initially, the effect of flux material and temperature was evaluated using thermogravimetric/diffraction thermal analysis (TG/DTA). The reduction behavior of the fluxed self-reducing pellets of ilmenite was then studied in a raising hearth furnace. The TG/DTA results indicated improved performance of sodium carbonate over lime within a temperature range of 1173 K to 1373 K. Under different reduction conditions in raising hearth furnace experiments, the leaching of reduced ilmenite in diluted hydrochloric acid (6.6 pct concentration) produced different grades of synthetic rutile. The best reduction conditions under optimized parameters enhanced the TiO{sub 2} from initial 51 to 93 wt pct in the synthetic rutile. The X-ray diffraction and electron probe microanalysis investigation of the unreduced and reduced ilmenite revealed the conversion of the Fe{sub x}O{sub y}-SiO{sub 2}-Al{sub 2}O{sub 3} system to Na{sub 2}O-SiO{sub 2}-Al{sub 2}O{sub 3} by sodium carbonate. The thermochemical analysis further explained the influence of sodium carbonate on the liquidus of Na{sub 2}O-SiO{sub 2}-Al{sub 2}O{sub 3} slag. The improved process enables the complete reduction of the iron from weathered ilmenite to produce a high-grade rutile.

36 MATERIALS SCIENCE↗

Dissolution Behavior and Phase Evolution During Aluminum Oxide Dissolution in BOF Slag

Basic oxygen furnace (BOF) slag is a byproduct in the steel making process and is produced in considerable amounts. Thus, its valorization is important. Additives such as Al{sub 2}O{sub 3} can be utilized to modify the composition and mineralogy of the slag provided that a fast and effective dissolution of these additives in molten slags can be ensured. With this in mind, the dissolution of Al{sub 2}O{sub 3} particles in molten BOF slag has been investigated between 1500 and 1600 °C. In all cases, a dissolution zone forms around the dissolving particle which limits the dissolution rate in the melt under natural convection conditions. The dissolution in the current system is found to be an indirect process, wherein crystalline reaction products like CaAl{sub 4}O{sub 7} (CA{sub 2}) and CaAl{sub 2}O{sub 4} (CA) form on the surface of the particles. CA forms at 1500 °C and CA{sub 2} at 1600 °C. These reaction products form a continuous layer on the surface of the dissolving particles but the thickness of this reaction layer remains limited. The experimental data have been utilized to evaluate the dissolution paths. Near the Al{sub 2}O{sub 3}/slag interface, the inter-diffusion of Al{sub 2}O{sub 3} and CaO occurs due to which the dissolution path shifts towards the Al{sub 2}O{sub 3}-CaO binary system. A phenomenological model is presented to explain the evolution of the dissolution process in the current system, wherein the kinetics of the process is used to explain the reaction products formed at 1500 °C and 1600 °C.

36 MATERIALS SCIENCE↗

Arsenic cycling within the water column of a small lake receiving contaminated ground-water discharge

The fate of arsenic discharged from contaminated ground water to a small, shallow lake at a hazardous waste site was examined to understand the role of iron (hydr)oxide precipitation-dissolution processes within the water column. Field and laboratory observations indicate that arsenic solubility was controlled, in part, by the extent of ferrous iron oxidation-precipitation and arsenic sorption occurring near the lake chemocline. Laboratory experiments were conducted using site-derived water to assess the impact of these coupled processes on the removal of dissolved arsenic from the water column. The measured concentration of organic carbon from epilimnetic and hypolimnetic water sampled from the lake was approximately 1.3 mM and 17.0 mM, respectively. Experiments conducted with these samples along with synthetic controls containing no organic carbon demonstrated that observed rates of formation and crystallinity of the precipitated iron (hydr)oxide were dependent on the concentration of organic carbon in the lake water. Increasing dissolved organic matter concentration did not significantly interfere with ferrous iron oxidation, but inhibited iron (hydr)oxide precipitation and subsequent sorption of arsenic. For experiments using water sampled from the lake hypolimnion there was a strong relationship between the fraction of precipitated iron and the fraction of sorbed arsenic. Laboratory- and field-derived iron (hydr)oxide precipitates were characterized to evaluate mineralogy and arsenic distribution. In-situ suspended solids and precipitates formed in laboratory experiments using hypolimnetic water were identified as poorly crystalline 2-line ferrihydrite. These solids were readily dissolved in the presence of dithionite indicating that elevated dissolved iron and arsenic observed in the hypolimnion resulted, in part, from in-situ reductive dissolution of settling 2-line ferrihydrite near the sediment-water interface. These observations support the contention that the levels of dissolved arsenic observed in the shallow lake can be attributed to ground-water discharge and internal recycling of arsenic within the water column. The efficiency of the process resulting in iron (hydr)oxide precipitation and arsenic sorption limits the downgradient export of arsenic derived from ground-water discharge.

54 ENVIRONMENTAL SCIENCES↗

On mobilization of lead and arsenic in groundwater in response to CO2 leakage from deep geological storage

If carbon dioxide stored in deep saline aquifers were to leak into an overlying aquifer containing potable groundwater, the intruding CO{sub 2} would change the geochemical conditions and cause secondary effects mainly induced by changes in pH In particular, hazardous trace elements such as lead and arsenic, which are present in the aquifer host rock, could be mobilized. In an effort to evaluate the potential risks to potable water quality, reactive transport simulations were conducted to evaluate to what extent and mechanisms through which lead and arsenic might be mobilized by intrusion of CO{sub 2}. An earlier geochemical evaluation of more than 38,000 groundwater quality analyses from aquifers throughout the United States and an associated literature review provided the basis for setting up a reactive transport model and examining its sensitivity to model variation. The evaluation included identification of potential mineral hosts containing hazardous trace elements, characterization of the modal bulk mineralogy for an arenaceous aquifer, and augmentation of the required thermodynamic data. The reactive transport simulations suggest that CO{sub 2} ingress into a shallow aquifer can mobilize significant lead and arsenic, contaminating the groundwater near the location of intrusion and further downstream. Although substantial increases in aqueous concentrations are predicted compared to the background values, the maximum permitted concentration for arsenic in drinking water was exceeded in only a few cases, whereas that for lead was never exceeded.

54 ENVIRONMENTAL SCIENCES↗

Microbially mediated iron redox cycling of subsurface sediments from Hanford Site, Washington State, USA

Iron-bearing clay minerals are predominant in soils and sediments, and they undergo oxidation-reduction cycles as a result of natural processes such as wetting/drying cycles and plant root respiration. However, the kinetics and mechanisms of multiple redox cycles of iron in clay-rich sediments and consequences of such cycling on sediment properties are poorly understood. The objective of this study was to understand how multiple redox cycles of Fe in clay-rich sediment affect the rate and extent of Fe bioreduction and the physicochemical properties of the sediment. A natural sediment sample containing Fe-bearing montmorillonite from Hanford, Washington, USA was size-fractionated [2.0 to 0.5 μm (Hanford-C) and 0.5 to 0.02 μm (Hanford-F)] and redox-cycled for four times. Bioreduction was achieved utilizing Geobacter sulfurreducens and re-oxidization was performed with sparged air. Time-course change of total Fe (II) was monitored to measure the rate and extent of Fe (III) bioreduction. Redox-cycled sediments were characterized to determine the physicochemical changes. Both the initial rate and extent of bioreduction fluctuated across the four redox cycles, but they ultimately decreased from 5.3 μmol g -1 h -1 and 22.9% to nearly zero by the fourth cycle. These fluctuation patterns were likely due to a combined effect of reductive dissolution of small/poorly crystalline clay particles (by 3–5%) and clay mineral structural changes, as evidenced by redox induced changes of aqueous chemistry, surface area, cation exchange capacity, mineralogy, and Mössbauer parameters. Once these small/poorly crystalline clay particles were dissolved, structural Fe in residual larger and more crystalline clay particles was largely reversible across additional redox cycles, as revealed by Mössbauer spectroscopy through the first three cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-crystal elasticity of (Mg[subscript 0.9]Fe[subscript 0.1])O to 81 GPa

Ferropericlase is the second most abundant mineral in Earth's lower mantle and knowledge of its elastic properties at relevant conditions is needed to adequately interpret seismic observations in terms of the mineralogy and thermal state of the deep Earth. Here, we report the complete elastic tensor of (Mg{sub 0.9}Fe{sub 0.1})O ferropericlase to 81.2 GPa at room temperature measured by Brillouin spectroscopy and X-ray diffraction in the diamond-anvil cell. Our data indicate that the spin transition of iron between 45 and 63 GPa dramatically affects the longitudinal and off-diagonal elements of the elastic stiffness tensor c{sub 11} and c{sub 12}, whereas it leaves the shear constant c{sub 44} almost unaffected. Based on our results, the spin transition markedly changes the pressure (and temperature) dependence of the compressional and bulk sound velocities and must be taken into account in any attempt to match average radial seismic velocity profiles with mineral physics observations. The different pressure dependence of compressional (and bulk) and shear sound velocities across the high-spin to low-spin (HS-LS) transition implies that the spin transition might be best observed in the v{sub p}/v{sub s} ratio and its pressure (and temperature) derivative. We also point out the possibility that the spin transition leads to an anti-correlated temperature dependence of shear and compressional wave speeds in certain pressure-temperature regimes in Earth's lower mantle.

58 GEOSCIENCES↗

Uranium-series comminution ages of continental sediments: Case study of a Pleistocene alluvial fan

Obtaining quantitative information about the timescales associated with sediment transport, storage, and deposition in continental settings is important but challenging. The uranium-series comminution age method potentially provides a universal approach for direct dating of Quaternary detrital sediments, and can also provide estimates of the sediment transport and storage timescales. (The word"comminution" means"to reduce to powder," reflecting the start of the comminution age clock as reduction of lithic parent material below a critical grain size threshold of ~;;50 mu m.) To test the comminution age method as a means to date continental sediments, we applied the method to drill-core samples of the glacially-derived Kings River Fan alluvial deposits in central California. Sediments from the 45 m core have independently-estimated depositional ages of up to ~;;800 ka, based on paleomagnetism and correlations to nearby dated sediments. We characterized sequentially-leached core samples (both bulk sediment and grain size separates) for U, Nd, and Sr isotopes, grain size, surface texture, and mineralogy. In accordance with the comminution age model, where 234U is partially lost from small sediment grains due to alpha recoil, we found that (234U/238U) activity ratios generally decrease with age, depth, and specific surface area, with depletions of up to 9percent relative to radioactive equilibrium. The resulting calculated comminution ages are reasonable, although they do not exactly match age estimates from previous studies and also depend on assumptions about 234U loss rates. The results indicate that the method may be a significant addition to the sparse set of available tools for dating detrital continental sediments, following further refinement. Improving the accuracy of the method requires more advanced models or measurements for both the recoil loss factor fa and weathering effects. We discuss several independent methods for obtaining fa on individual samples that may be useful for future studies.

58 GEOSCIENCES↗

Equation of state and phase diagram of FeO

Wuestite, Fe{sub 1-x}O, is an important component in the mineralogy of Earth's lower mantle and may also be a component in the core. Therefore the high pressure, high temperature behavior of FeO, including its phase diagram and equation of state, is essential knowledge for understanding the properties and evolution of Earth's deep interior. We performed X-ray diffraction measurements using a laser-heated diamond anvil cell to achieve simultaneous high pressures and temperatures. Wuestite was mixed with iron metal, which served as our pressure standard, under the assumption that negligible oxygen dissolved into the iron. Our data show a positive slope for the subsolidus phase boundary between the B1 and B8 structures, indicating that the B1 phase is stable at the P-T conditions of the lower mantle and core. We have determined the thermal equation of state of B1 FeO to 156 GPa and 3100 K, finding an isothermal bulk modulus K{sub 0} = 149.4 {+-} 1.0 GPa and its pressure derivative K'{sub 0} = 3.60 {+-} 0.4. This implies that 7.7 {+-} 1.1 wt.% oxygen is required in the outer core to match the seismologically-determined density, under the simplifying assumption of a purely Fe-O outer core.

58 GEOSCIENCES↗