Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LAB”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Transportation Modeling and Global Health

A patient in the United States has been diagnosed with Ebola. Fear and panic kicks in across the country, and hospitals are inundated with hundreds of people, some infected with the highly contagious disease and others not. Blood tests are needed for positive diagnoses, but the diagnostic labs are overwhelmed with blood samples to test, and staff are overworked and stressed. Infected people need to be quarantined and treated, but it's hard to find rooms to quarantine so many patients. Sick people who need triage and regular care for other emergencies are afraid to go to hospitals for fear of Ebola, which has a 50% fatality rate. And since hospitals are so overwhelmed, sick people often stay home, infecting heathy people around them; the U.S. is now in the grips a full-blown Ebola outbreak. Sandia's high-performance computers simulated such a nightmare scenario recently, and with good reason. An Ebola outbreak in the United States could be devastating if hospitals are not prepared. When an Ebola outbreak in West Africa became a global concern in 2014, health advisers were alarmed at the length of time it took to properly diagnose infected people. In rural areas in Liberia, for example, blood samples from ailing people would be sent to a laboratory for testing, but the closest lab was hundreds of miles away through difficult and sometimes impassable roads. In more urban areas, blood samples would be sent to nearby labs, but those labs were often already overburdened by the sheer volume of samples to test. Staff at some treatment centers were unaware that a lab a little farther away might have the capacity to take in more samples. Meanwhile, undiagnosed infected people were unknowingly spreading the disease to many others around them, worsening the outbreak. The U.S. Defense Threat Reduction Agency (DTRA) and Centers for Disease Control and Prevention (CDC) posed a serious question: how do we improve blood-sample transportation routes in Liberia to ensure that samples taken from ill people are tested as quickly as possible, ensuring a proper diagnosis and faster treatment? Sandia scientists, already experts in transportation modeling for nuclear materials, quickly swarmed on this problem. The Sandia Ebola response team immediately set out to collect data from the region using available maps and local information, and transformed the raw data to GIS maps. Then, applying Sandia transportation routing algorithms, the team identified the optimal routes to get blood samples to the best laboratory for testing, even if that lab was not geographically the closest. The models also showed the best possible locations for mobile diagnostic laboratories that would better support the very rural regions that were most affected by the Ebola outbreak.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

The Vault: National Security Then and Now

The employees at Los Alamos National Laboratory have always been the key to our mission success, dating all the way back to our inception in 1939 as Project Y. This was the secret Los Alamos Lab of the Manhattan Project charged with designing and producing the world’s first atomic weapons to help end World War II. Back then, prospective Lab employees received letters that directed them to an office at 109 E. Palace in Santa Fe, New Mexico. There, they were greeted by Dorothy McKibbin, secretary to Lab Director J. Robert Oppenheimer. Before anyone headed up the hill to begin work, Dorothy typed up the new employee’s personal information on what quickly became known as the McKibbin Card. Lab employees also had official badges, the black and white photos of which have become iconic over time. Today’s staff at the National Security Research Center, the Lab’s classified library, are just as vital as the Lab’s first workforce was. Our highly trained experts partner with researchers to solve global challenges.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2023

Why are we still here 80 years later?

The Lab helped end World War II in 1945, but could the Lab survive peace? Join Senior Lab Historian Alan Carr and Historian Nic Lewis as they present “Why we’re still in Business,” examining the role of the Lab once World War II had ended. This presentation, which commemorates the Lab’s 80th anniversary, Carr and Lewis reconsider the popular belief that the Lab nearly ceased to exist after having developed the atomic bombs that helped end war.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2024

Machine Learning and Data Science to Advance Laboratory Earthquake Prediction and Illuminate the Mechanics of Precursors to Failure

Earthquakes represent one of our greatest natural hazards and in recent years human induced seismicity is adding to the threat. Even a modest improvement in the ability to forecast devastating large earthquakes or smaller shallow events associated with fluid injection could save thousands of lives and billions of dollars. Current efforts to forecast earthquakes are limited by knowledge of earthquake physics and hampered by a lack of reliable lab or field observations. However, recent work has provided a critical opportunity for advancement. We have found: 1) clear and consistent precursors prior to earthquake-like failure in the laboratory and 2) that lab earthquakes can be predicted using machine learning (ML). These works show that stick-slip failure events –the lab equivalent of earthquakes– are preceded by a cascade of micro-failure events that radiate elastic energy in a manner that foretells catastrophic failure. Remarkably, ML predicts the fault zone stress state, the failure time and in some cases the magnitude of lab earthquakes. In addition, the observations include clear precursors to failure in the form of changes in fault zone properties prior to lab earthquakes. Precursors have been observed in previous laboratory studies but their origin is poorly understood and their possible connection to ML based earthquake prediction is unknown. The work conducted under our project has dramatically expanded these efforts. We have developed an integrated data science approach to illuminate the physics of earthquake precursors and lab earthquake prediction. Our work has accelerated the development of ML, artificial intelligence (AI), and related data science approaches by providing massive data sets that are tightly connected to critical scientific problems and by bringing together leading subject matter experts and data scientists. Earthquake physics involves phenomena that are far from equilibrium. Our work has leveraged data science methods to illuminate these phenomena and investigate how they relate to earthquake prediction. In addition to a large database with many types of labeled events that is available to everyone, our work has advanced the fundamental understanding of seismic forecasting, earthquake physics, and fault rheology

58 GEOSCIENCES↗
DOE OSTI2018

Tuning the Surface Plasmon Resonance of Lanthanum Hexaboride to Absorb Solar Heat: A Review

While traditional noble metal (Ag, Au, and Cu) nanoparticles are well known for their plasmonic properties, they typically only absorb in the ultraviolet and visible regions. The study of metal hexaborides, lanthanum hexaboride (LaB 6 ) in particular, expands the available absorbance range of these metals well into the near-infrared. As a result, LaB6 has become a material of interest for its energy and heat absorption properties, most notably to those trying to absorb solar heat. Given the growing popularity of LaB 6 , this review focuses on the advances made in the past decade with respect to controlling the plasmonic properties of LaB 6 nanoparticles. This review discusses the fundamental structure of LaB 6 and explains how decreasing the nanoparticle size changes the atomic vibrations on the surface and thus the plasmonic absorbance band. We explain how doping LaB 6 nanoparticles with lanthanide metals (Y, Sm, and Eu) red-shifts the absorbance band and describe research focusing on the correlation between size dependent and morphological effects on the surface plasmon resonance. This work also describes successes that have been made in dispersing LaB 6 nanoparticles for various optical applications, highlighting the most difficult challenges encountered in this field of study.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Science Requirements and Conceptual Design for a Polarized Medium Energy Electron-Ion Collider at Jlab

Researchers have envisioned an electron-ion collider with ion species up to heavy ions, high polarization of electrons and light ions, and a well-matched center-of-mass energy range as an ideal gluon microscope to explore new frontiers of nuclear science. In its most recent Long Range Plan, the Nuclear Science Advisory Committee (NSAC) of the US Department of Energy and the National Science Foundation endorsed such a collider in the form of a 'half-recommendation.' As a response to this science need, Jefferson Lab and its user community have been engaged in feasibility studies of a medium energy polarized electron-ion collider (MEIC), cost-effectively utilizing Jefferson Lab's already existing Continuous Electron Beam Accelerator Facility (CEBAF). In close collaboration, this community of nuclear physicists and accelerator scientists has rigorously explored the science case and design concept for this envisioned grand instrument of science. An electron-ion collider embodies the vision of reaching the next frontier in Quantum Chromodynamics - understanding the behavior of hadrons as complex bound states of quarks and gluons. Whereas the 12 GeV Upgrade of CEBAF will map the valence-quark components of the nucleon and nuclear wave functions in detail, an electron-ion collider will determine the largely unknown role sea quarks play and for the first time study the glue that binds all atomic nuclei. The MEIC will allow nuclear scientists to map the spin and spatial structure of quarks and gluons in nucleons, to discover the collective effects of gluons in nuclei, and to understand the emergence of hadrons from quarks and gluons. The proposed electron-ion collider at Jefferson Lab will collide a highly polarized electron beam originating from the CEBAF recirculating superconducting radiofrequency (SRF) linear accelerator (linac) with highly polarized light-ion beams or unpolarized light- to heavy-ion beams from a new ion accelerator and storage complex. Since the very beginning, the design studies at Jefferson Lab have focused on achieving high collider performance, particularly ultrahigh luminosities up to 10{sup 34} cm{sup -2}s{sup -1} per detector with large acceptance, while maintaining high polarization for both the electron and light-ion beams. These are the two key performance requirements of a future electron-ion collider facility as articulated by the NSAC Long Range Plan. In MEIC, a new ion complex is designed specifically to deliver ion beams that match the high bunch repetition and highly polarized electron beam from CEBAF. During the last two years, both development of the science case and optimization of the machine design point toward a medium-energy electron-ion collider as the topmost goal for Jefferson Lab. The MEIC, with relatively compact collider rings, can deliver a luminosity above 10{sup 34} cm{sup -2}s{sup -1} at a center-of-mass energy up to 65 GeV. It offers an electron energy up to 11 GeV, a proton energy up to 100 GeV, and corresponding energies per nucleon for heavy ions with the same magnetic rigidity. This design choice balances the scope of the science program, collider capabilities, accelerator technology innovation, and total project cost. An energy upgrade could be implemented in the future by adding two large collider rings housed in another large tunnel to push the center-of-mass energy up to or exceeding 140 GeV. After careful consideration of an alternative electron energy recovery linac on ion storage ring approach, a ring-ring collider scenario at high bunch repetition frequency was found to offer fully competitive performance while eliminating the uncertainties of challenging R&D on ampere-class polarized electron sources and many-pass energy-recovery linacs (ERLs). The essential new elements of an MEIC facility at Jefferson Lab are an electron storage ring and an entirely new, modern ion acceleration and storage complex. For the high-current electron collider ring, the upgraded 12 GeV CEBAF SRF linac will serve as a full-energy injector, and, if needed, provide top-off refilling. The CEBAF fixed-target nuclear physics program can be simultaneously operated since the filling time of the electron ring is very short. The ion complex for MEIC consists of sources for polarized light ions and unpolarized light to heavy ions, an SRF ion linac with proton energy up to 280 MeV, a 3 GeV prebooster synchrotron, a large booster synchrotron for proton energy up to 20 GeV, and a medium-energy collider ring with energy up to 100 GeV. The ion complex can accelerate other species of ions with corresponding energies at each accelerating stage. There are three collision points planned for MEIC. Two of them are for collisions with medium-energy ions; the third is for low energy ion beams stored in a dedicated low-energy compact storage ring, as a possible follow-on project.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Work Smarter, Not Harder: Improving Energy Efficiency and Safety through Smarter Ventilation: Preprint

Ventilation is a key component to maintaining healthy, safe indoor air quality. Especially important in laboratories, ventilation is the first line of defense against airborne hazards produced during research activities. Though a vital component, laboratory ventilation systems are often victim to ineffective operation, posing a risk to the most important asset - the researchers. Furthermore, system inefficiencies can lead to up to 50% wasted energy. To improve both energy efficiency and safety in laboratories, we present the Smart Labs Toolkit - a resource developed by the U.S. Department of Energy Federal Energy Management Program and the International Institute for Sustainable Laboratories that guides laboratory stakeholders through a straight-forward, holistic approach to achieve dynamic, high-performance laboratories. Smart Labs enable safe and efficient world class science to occur in laboratories through high-performance methods. A Smart Labs program employs a combination of physical, administrative, and management techniques to assess, optimize, and manage high performance laboratories. We will focus on a central component of the Smart Labs approach - the Laboratory Ventilation Risk Assessment, a systematic process for identifying risk due to airborne hazards to inform the operation of dynamic ventilation that optimizes safety and efficiency. Case studies of organizations who have successfully implemented Smart Labs ventilation management programs will also be shared. In learning ventilation strategies successful in critical laboratory environments, learn the tools and resources needed to successfully manage energy in any building through smarter, safer ventilation.

buildings↗
DOE OSTI2017

A New Grain Refiner for Ferritic Steels

A new grain refiner, LaB{sub 6}, was identified for ferritic steels based on the crystallographic calculation using the edge-to-edge matching model. Addition of 0.5 wt pct LaB{sub 6} led to a reduction of the average grain size from 765 to 92 μm and the proportion of the columnar structure from 35 to 8 pct in an as-cast Fe-4Si ferritic alloy. Although LaB{sub 6} was supposed to act as an active inoculant for δ-ferrite, thermodynamic calculation indicated that LaB{sub 6} is not thermodynamically stable in the melt of the Fe-4Si alloy. It was subject to decompose into La and B solutes. Consequently, both La and B reacted with Fe, O and S, forming different compounds. Microstructural examination at room temperature observed La{sub 2}SO{sub 2} and La{sub 2}O{sub 3} particles within the ferrite grains and Fe{sub 2}B along the grain boundaries in the samples. Through EBSD analysis, a reproducible orientation relationship between ferrite and La{sub 2}SO{sub 2} was identified. In addition, the edge-to-edge matching calculation also predicted the high potency for La{sub 2}SO{sub 2} to be an effective nucleant for δ-ferrite. It was considered that the grain refinement of LaB{sub 6} was attributed to the enhanced heterogeneous nucleation of δ-ferrite by La{sub 2}SO{sub 2}, and the solute effect of B due to the high Q-value in ferrite.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Assessing the sensitivity and repeatability of permanganate oxidizable carbon as a soil health metric: An interlab comparison across soils

Soil organic matter is central to the soil health framework. Therefore, reliable indicators of Soil organic matter is central to the soil health framework. Therefore, reliable indicators of changes in soil organic matter are essential to inform land management decisions. Permanganate oxidizable carbon (PDXC), an emerging soil health indicator, has shown promise for being sensitive to soil management. However, strict standardization is required for widespread implementation in research and commercial contexts. Here, we used 36 soils-three from each of the 12 USDA soil orders-to determine the effects of sieve size and soil mass of analysis on PDXC results. Using replicated measurements across 12 labs in the US and the EU (n = 7951 samples), we quantified the relative importance of 1) variation between labs, 2) variation within labs, 3) effect soil mass, and 4) effect of soil sieve size on the repeatability of PDXC. We found a wide range of overall variability in PDXC values across labs (0.03 to 171.8%; mean = 13.4%), and much of this variability was attributable to within-lab variation (median = 6.5%) independently of soil mass or sieve size. Greater soil mass (2.5 g) decreased absolute PDXC values by a mean of 177 mg kg -1 soil and decreased analytical variability by 6.5%. For soils with organic carbon (SOC) >10%, greater soil mass (2.5 g) resulted in more frequent PDXC values above the limit of detection whereas the lower soil mass (0.75 g) resulted in PDXC values below the limit of detection for SOC contents <5%. A finer sieve size increased absolute values of PDXC by 124 mg kg -1 while decreasing the analytical variability by 1.8%. In general, soils with greater SOC contents had lower analytical variability. These results point to potential standardizations of the PDXC protocol that can decrease the variability of the metric. We recommend that the PDXC protocol be standardized to use 2.5 g for soils <10% SOC. Sieve size was a relatively small contributor to analytical variability and therefore we recommend that this decision be tailored to the study purpose. Tradeoffs associated with these standardizations can be mitigated, ultimately providing guidance on how to standardize PDXC for routine analysis.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Nuclear Data Sheets for A=266,270,274,278,282,286,290,294,298☆

Spectroscopic information such as production, identification, half-lives, decay modes and possible excited states for experimentally known nuclides of mass numbers 266, 270, 274, 278, 282, 286, 290, 294, and 298 are presented together with the recommended values, superseding information and data in the previous ENSDF and NDS evaluation by 2005Gu33. No nuclides have yet been identified for A=302. In the last 14 years, large amounts of new and definitive data on the superheavy nuclides (SHN) have become available, thus changing almost entirely the landscape of nuclear data in this mass region, as also indicated by a number of recent review articles: 2017Og01, 2016Ho09, 2016Ho06 (for fission barriers), 2015Og05, 2015Og07, 2015Mo25, 2015OgZX, 2013Th02, and 2011Og07. See 2016Ka49 for IUPAC technical discussions for the discovery of Z=117 (Ts), Z=115 (Mc), Z=113 (Nh), 2001Ka70 and 2003Ka71 for Z=110-112, 2011Ba54 for Z≥113, 2009Ba62 for Z=112, and 2016Ka50 for Z=118 (Og). A special issue of Nuclear Physics A444 (2015) is devoted to research on superheavy elements (SHE) with 27 articles. In particular, see article by 2015Ko20 on mass spectrometric searches for superheavy elements in terrestrial matter. See also Proceedings of Nobel Symposium NS160 ‘Chemistry and Physics of Heavy and Superheavy Elements’ published in Eur. Phys. Jour. Web of Conferences 131 (2016), in particular 2016UtZZ, 2016DmZZ and 2016HoZY. See also 2016DuZX for future prospects of discovery of elements beyond Z=118 A=266: {sup 266}Db, {sup 266}Sg, {sup 266}Bh, {sup 266}Hs and {sup 266}Mt are the experimentally identified nuclides with A=266. Identification of {sup 266}Lr from α decay of {sup 270}Db has been proposed by 2014Kh04 from experiments at GSI, but complete details and analyses of all the four decay chains reported in this experiment have not yet been published, and discussion in 2015Og05 review article considering their work from Dubna (2013Og04, 2011Og04) and from GSI (2014Kh04) still concluded that {sup 270}Db decayed dominantly by SF mode, in contrast with dominant α decay mode proposed by 2014Kh04. Experiments carried out at FLNR-JINR-Dubna in collaboration with LLNL and ORNL, GSI-SHIP facility, RIKEN, and LBNL facilities: {sup 266}Db from the α-decay of {sup 282}Nh in two correlated decay chains at Dubna; {sup 266}Sg as α-daughter of {sup 270}Hs in 12 correlated decay chains at Dubna and GSI; {sup 266}Bh in α decay of {sup 278}Nh in three correlated decay chains observed at RIKEN, and also directly with one event in {sup 249}Bk({sup 22}Ne,5n) at LBNL, and with four events in {sup 243}Am({sup 26}Mg,3n) at HIRFL-Lanzhou; {sup 266}Hs as α-daughter of {sup 270}Ds at GSI in two different experiments, six correlated decays in the first, and 25 decay chains in the second experiment, the analysis of which has not been fully reported as yet; and {sup 266}Mt directly in {sup 209}Bi({sup 58}Fe,n) reaction at GSI in two different experiments, observing three events in the first experiment and 12 events in the second, also produced in {sup 208}Pb({sup 59}Co,n) reaction at LBNL, observing five correlated decay chains. See also 2000Ho27 for discussion on {sup 266}Sg and {sup 266}Mt. A=270: {sup 270}Db, {sup 270}Bh, {sup 270}Hs, {sup 270}Mt and {sup 270}Ds are the experimentally identified nuclides with A=270 are presented. Experiments carried out at FLNR-JINR-Dubna in collaboration with LLNL and ORNL, GSI-SHIP facility, and RIKEN: {sup 270}Db from the decay of {sup 294}Ts in six correlated decay chains at Dubna and GSI; {sup 270}Bh as α great-granddaughter of {sup 282}Nh in two correlated decay chains observed at Dubna; {sup 270}Hs directly in {sup 248}Cm({sup 26}Mg,4n) reaction at GSI, and in {sup 226}Ra({sup 48}Ca,4n) reaction at Dubna; {sup 270}Mt as granddaughter of {sup 278}Ts in three correlated decay chains at RIKEN; and {sup 270}Ds directly in {sup 207}Pb({sup 64}Ni,n) at GSI in 33 correlated decay chains. A=274: {sup 274}Bh, {sup 274}Mt and {sup 274}Rg are the experimentally identified nuclides with A=274. Search for {sup 274}Ds in {sup 238}U({sup 40}Ar, 4n),E=5.7 MeV/nucleon reaction and subsequent α decays at GSI (1990Sc11) proved negative. Experiments carried out at FLNR-JINR-Dubna in collaboration with LLNL and ORNL, GSI-SHIP facility, and RIKEN: {sup 274}Bh from the decay of {sup 294}Ts in six correlated decay chains at Dubna and GSI, {sup 274}Mt produced as α daughter of {sup 282}Nh in two correlated decay chains observed at Dubna, and {sup 274}Rg as α daughter of {sup 278}Nh produced in three correlated decay chains at RIKEN. A=278: {sup 278}Mt, {sup 278}Rg and {sup 278}Nh are the experimentally identified nuclides with A=278. A very tentative evidence is provided for {sup 278}Bh and {sup 278}Hs from a chain originally observed and assigned to {sup 289}Fl by 1999Og10, but later reassigned by 2004Og10 to {sup 290}Fl, and further discussed in detail by 2016Ho09, where, based on systematics of α decays and SF half-lives, {sup 290}Fl is proposed to decay via ε mode to {sup 290}Nh, which then decays by an α chain, ending in {sup 278}Bh that decays by SF mode. Experiments carried out at FLNR-JINR-Dubna in collaboration with LLNL and ORNL labs in the USA, GSI-SHIP facility, and RIKEN: {sup 278}Mt from the decay of {sup 294}Ts in six correlated decay chains at Dubna and GSI, {sup 278}Rg produced as α daughter of {sup 282}Nh in two correlated decay chains observed at Dubna, and {sup 278}Nh produced directly in three correlated decay chains at RIKEN. A=282: {sup 282}Rg, {sup 282}Cn and {sup 282}Nh are the experimentally identified nuclides with A=282. A very tentative evidence is provided for {sup 282}Mt and {sup 282}Ds from a chain originally observed and assigned to {sup 289}Fl by 1999Og10, but later reassigned by 2004Og10 to {sup 290}Fl, and further discussed in detail by 2016Ho09, where, based on systematics of α decays and SF half-lives, {sup 290}Fl is proposed to decay via ε mode to {sup 290}Nh, which then decays by an α chain, ending in {sup 278}Bh that decays by SF mode. Experiments carried out at FLNR-Dubna, in collaboration with LLNL and ORNL labs in the USA, and at GSI-SHIP facility confirm the identification of these isotopes, {sup 282}Rg in α decay chain of {sup 294}Ts in six correlated decay chains at Dubna and GSI, {sup 282}Cn produced in four ways at Dubna: independently in one correlated decay chain, as α daughter of {sup 286}Lv in 11 correlated decay chains, as α grand-daughter of {sup 290}Lv in 12 correlated decay chains, as α great-grand daughter of {sup 294}Og in four correlated decay chains, and {sup 282}Nh produced at Dubna directly in two correlated decay chains. A=286: {sup 286}Nh and {sup 286}Fl are the only experimentally identified nuclides with A=286. A very tentative evidence is provided for {sup 286}Rg and {sup 286}Cn from a chain originally observed and assigned to {sup 289}Fl by 1999Og10, but later reassigned by 2004Og10 to {sup 290}Fl, and further discussed in detail by 2016Ho09, where, based on systematics of α decays and SF half-lives, {sup 290}Fl is proposed to decay via ε mode to {sup 290}Nh, which then decays by an α chain, ending in {sup 278}Bh that decays by SF mode. 2017Ka66 in experiments at RIKEN using GARIS separator interpret one correlated decay chain in three different ways, one involving possible production of {sup 294}Lv in {sup 248}Cm({sup 48}Ca,2n),E=261.6 MeV, and α decay to {sup 290}Fl which further decays to {sup 286}Cn. Experiments carried out at FLNR-Dubna, in collaboration with LLNL and ORNL labs in the USA, and at GSI-SHIP facility confirm the identification of these isotopes, {sup 286}Nh as α grand-daughter of {sup 294}Ts in six correlated decay chains, and {sup 286}Fl produced in three ways: independently in 11 correlated decay chains, as α daughter of {sup 290}Lv in 12 correlated decay chains, and as α grand-daughter of {sup 294}Og in four correlated decay chains. A=290: {sup 290}Mc and {sup 290}Lv are the only experimentally identified nuclides with A=290. A tentative evidence is provided for {sup 290}Nh and {sup 290}Fl from a chain originally observed and assigned to {sup 289}Fl by 1999Og10, but later reassigned by 2004Og10 to {sup 290}Fl, and further discussed in detail by 2016Ho09, where, based on systematics of α decays and SF half-lives, {sup 290}Fl is proposed to decay via ε mode to {sup 290}Nh, which then decays by an α chain, ending in {sup 278}Bh that decays by SF mode. 2017Ka66 in experiments at RIKEN using GARIS separator interpret one correlated decay chain in three different ways, one involving possible production of {sup 294}Lv in {sup 248}Cm({sup 48}Ca,2n),E=261.6 MeV, and α decay to {sup 290}Fl. Experiments carried out at FLNR-Dubna, in collaboration with LLNL and ORNL labs in the USA, and at GSI-SHIP facility confirm the identification of these isotopes, {sup 290}Mc as α daughter of {sup 294}Ts in six correlated decay chains, and {sup 290}Lv produced in two ways, independently in 14 correlated decay chains, and as α daughter of {sup 294}Og in four correlated decay chains. A=294: {sup 294}Ts and {sup 294}Og are the only experimentally identified nuclides with A=294. Experiments carried out at FLNR-Dubna, in collaboration with LLNL and ORNL labs in the USA, and at GSI-SHIP facility confirm the identification of these isotopes, with a total of six EVR-α-SF correlated decay chains observed for {sup 294}Ts and four for {sup 294}Og. Tentative identification of {sup 294}Lv is provided by 2017Ka66 from the observation one correlated event using GARIS-RIKEN facility, where this event is interpreted in three possible ways, two interpretations lead to production of {sup 293}Lv and successive odd-A nuclides of {sup 289}Fl, {sup 285}Cn and {sup 281}Ds, whereas the third prediction starts with the production of {sup 294}Lv and successive {sup 290}Fl and {sup 286}Cn nuclides. Search for {sup 294}Rg in natural gold materials (2011De03), and for {sup 294}Ds, {sup 294}Fl and {sup 294}Mc in natural Pt, Pb and Bi samples (2011De21) using accelerator mass spectroscopy (AMS) proved negative, with extremely low upper limits established. Also 1980St05 did not see any evidence for {sup 294}Ds in natural Pt sample using AMS. A=298: Search for {sup 298}120 through fusion-evaporation reaction at Dubna, and for {sup 298}Fl and {sup 298}Mc in natural Pt, Pb and Bi samples using accelerator mass spectroscopy (AMS) proved negative. Tentative assignment of three α-α-α decay chains by 2016Ho09 to {sup 299}120 in {sup 248}Cm({sup 54}Cr,3n){sup 299}120 at GSI was refuted by 2017He11, assigning these correlations to random events, instead. A=302: Fluorescent x rays from Z=120 element were observed by 2012Fr03 from compound nucleus {sup 302}120 produced in {sup 238}U({sup 64}Ni,X),E=6.6 MeV/nucleon at GANIL, and x-ray yields were measured, together with minimum average time deduced from x-ray multiplicity. The compound nucleus could decay by 3n- or 4n-channels to produce {sup 299}120 or {sup 298}120. 2012He05 and 2016Ho09 also produced {sup 302}120 compound nucleus in {sup 248}Cm({sup 54}Cr, xn){sup 302}120{sup *},E=6.035 MeV/nucleon; and {sup 238}U({sup 64}Ni,xn){sup 302}120{sup *},E=5.53 MeV/nucleon reactions using UNILAC at GSI. Three α-α-α correlated decays from {sup 248}Cm({sup 54}Cr,xn){sup 302}120{sup *} reaction were tentatively assigned by 2016Ho09 to {sup 299}120 decay, however, a detailed analysis by 2017He11 refuted this claim, ascribing these events to random sequences. There are no data tables for A=302.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Toward the performance assessment of advanced nuclear waste forms: temperature dependence of lanthanide borosilicate glass dissolution

Lanthanide borosilicate (LaBS) glasses are among the most promising waste forms for the immobilization of high-level radioactive waste generated from advanced nuclear fuel cycles. However, the temperature dependence of their dissolution kinetics remains poorly understood and constrained, limiting the integration of these materials into established performance assessment models. Here, we investigate the dissolution behavior of the legacy AmCm2-19 LaBS glass and the benchmark alkali aluminoborosilicate ISG-1 in deionized water between 50 °C and 250 °C using ASTM C1285 (Product Consistency Test-B) protocols. For AmCm2-19 LaBS glass, normalized elemental release rates for boron and silicon increase with temperature before plateauing near 150 °C, consistent with solubility-limited behavior. From data obtained at 50 °C and 100 °C, Arrhenius analysis yields activation energies of E a (B) = 24.8 ± 0.3 kJ mol⁻¹ and E a (Si) = 14.4 ± 0.2 kJ mol⁻¹, similar or slightly lower than those previously reported for two other compositions of LaBS glasses. No secondary phases or alteration layers were detected by SEM-EDX or pXRD. These results establish one of the first temperature-dependent kinetic datasets for LaBS glass dissolution, providing quantitative parameters to inform mechanistic corrosion models and predictive simulations of glass degradation in geological disposal environments.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2012

Effect of sputtered lanthanum hexaboride film thickness on field emission from metallic knife edge cathodes

We report experiments and analysis of field emission from metallic knife-edge cathodes, which are sputter-coated with thin films of lanthanum hexaboride (LaB{sub 6}), a low-work function material. The emission current is found to depend sensitively on the thickness of the LaB{sub 6} layer. We find that films thinner than 10 nm greatly enhance the emitted current. However, cathodes coated with a thicker layer of LaB{sub 6} are observed to emit less current than the uncoated metallic cathode. This result is unexpected due to the higher work function of the bare metal cathode. We show, based on numerical calculation of the electrostatic potential throughout the structure, that the external (LaB{sub 6}/vacuum) barrier is reduced with respect to uncoated samples for both thin and thick coatings. However, this behavior is not exhibited at the internal (metal/LaB{sub 6}) barrier. In thinly coated samples, electrons tunnel efficiently through both the internal and external barrier, resulting in current enhancement with respect to the uncoated case. In contrast, the thick internal barrier in thickly coated samples suppresses current below the value for uncoated samples in spite of the lowered external barrier. We argue that this coating thickness variation stems from a relatively low (no higher than 10{sup 18} cm{sup -3}) free carrier density in the sputtered polycrystalline LaB{sub 6}.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Chemical bonding dictates drastic critical temperature difference in two seemingly identical superconductors

Though YB 6 and LaB 6 share the same crystal structure, atomic valence electron configuration, and phonon modes, they exhibit drastically different phonon-mediated superconductivity. YB 6 superconducts below 8.4 K, giving it the second-highest critical temperature of known borides, second only to MgB 2 . LaB 6 does not superconduct until near-absolute zero temperatures (below 0.45 K), however. Though previous studies have quantified the canonical superconductivity descriptors of YB 6 ’s greater Fermi-level (E f ) density of states and higher electron–phonon coupling (EPC), the root of this difference has not been assessed with full detail of the electronic structure. Through chemical bonding, we determine low-lying, unoccupied 4f atomic orbitals in lanthanum to be the key difference between these superconductors. These orbitals, which are not accessible in YB 6 , hybridize with π B–B bonds and bring this π-system lower in energy than the σ B–B bonds otherwise at E f . This inversion of bands is crucial: the optical phonon modes we show responsible for superconductivity cause the σ-orbitals of YB 6 to change drastically in overlap, but couple weakly to the π-orbitals of LaB 6 . These phonons in YB 6 even access a crossing of electronic states, indicating strong EPC. No such crossing in LaB 6 is observed. Finally, a supercell (the M k-point) is shown to undergo Peierls-like effects in YB 6 , introducing additional EPC from both softened acoustic phonons and the same electron-coupled optical modes as in the unit cell. Overall, we find that LaB 6 and YB 6 have fundamentally different mechanisms of superconductivity, despite their otherwise near-identity.

Science & Technology - Other Topics↗
DOE OSTI2015

A DEEP NARROWBAND IMAGING SEARCH FOR C iv AND He ii EMISSION FROM Lyα BLOBS

We conduct a deep narrowband imaging survey of 13 Lyα blobs (LABs) located in the SSA22 proto-cluster at z ∼ 3.1 in the C iv and He ii emission lines in an effort to constrain the physical process powering the Lyα emission in LABs. Our observations probe down to unprecedented surface brightness (SB) limits of (2.1–3.4) × 10{sup −18} erg s{sup −1} cm{sup −2} arcsec{sup −2} per 1 arcsec{sup 2} aperture (5σ) for the He ii λ1640 and C iv λ1549 lines, respectively. We do not detect extended He ii and C iv emission in any of the LABs, placing strong upper limits on the He ii/Lyα and C iv/Lyα line ratios, of 0.11 and 0.16, for the brightest two LABs in the field. We conduct detailed photoionization modeling of the expected line ratios and find that, although our data constitute the deepest ever observations of these lines, they are still not deep enough to rule out a scenario where the Lyα emission is powered by the ionizing radiation from an obscured active galactic nucleus. Our models can accommodate He ii/Lyα and C iv/Lyα ratios as low as ≃0.05 and ≃0.07, respectively, implying that one needs to reach SB as low as (1–1.5) × 10{sup −18} erg s{sup −1} cm{sup −2} arcsec{sup −2} (at 5σ) in order to rule out a photoionization scenario. These depths will be achievable with the new generation of image-slicing integral field units such as the Multi Unit Spectroscopic Explorer (MUSE) on VLT and the Keck Cosmic Web Imager (KCWI). We also model the expected He ii/Lyα and C iv/Lyα in a different scenario, where Lyα emission is powered by shocks generated in a large-scale superwind, but find that our observational constraints can only be met for shock velocities v{sub s} ≳ 250 km s{sup −1}, which appear to be in conflict with recent observations of quiescent kinematics in LABs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

Comparison of dielectric properties of additively manufactured vs. solvent cast polyimide dielectrics

The permittivity, dielectric loss, and DC dielectric breakdown strength of additively manufactured, solvent-cast, and commercial polyimide films are reported As expected, commercial films performed better than both AM and solvent-cast lab-made films. Solvent-cast films generally performed better than AM films, although performance depended on the optimization of the material for the specific deposition technique. The most significant degradation of performance in all the lab-made films was in the dispersion of both the x/Df measurements and the dielectric breakdown strength (Weibull β). Commercial films had a breakdown strength of 4891 kV/cm and β = 13.0 whereas the highest performing lab-made films had a breakdown strength of 4072 kV/cm and β = 3.8. Furthermore, this increase in dispersion in all the lab-made samples is attributed to higher variability in the preparation, a higher defect level related to fabrication in the lab environment and, for some AM samples, to morphology/topology features resulting from the deposition technique.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Capacity Expansion Planning for LA Basin: the Role of Energy Storage

The paper evaluates the deployment of energy storage to support equitable energy outcomes and the clean energy transition in the Los Angeles Basin (LAB). The deployment of energy storage is considered in a 10 zone capacity expansion planning model from 2022-2045. The model is based on the California Public Utility Commission’s 7 zone RESOLVE model but has been modified to give greater spatial granularity in the LAB area by addig 3 new zones representing the Eastern Los Angeles, Western Los Angeles and the El Nido subzones. Three different scenarios are studied in this work; a base case with no natural gas retirements in the LAB, and two cases exploring extreme natural gas retirements, where the 8GW of natural gas belonging to the LAB are retired by 2045. Study results indicate that storage can play a significant role in helping the LAB meeting its energy requirements. However, when considering extreme retirement scenarios, either new generation (such as solar) or capacity (such as new import capacity via transmission lines) will likely be needed to serve projected system loads.

Maloney, Patrick R.↗
DOE OSTI2021

Characterization of an electrically conductive proppant for fracture diagnostics

Fracture diagnosis with electromagnetic (EM) and electrical tools requires proppants with high electrical conductivity and mechanical strength. Lab measurements of the electrical and hydraulic conductivity of proppants are critical for selecting the best candidates. Such measurements greatly benefit simulations, field tests, and the ultimate application of such proppants in the field. To that end, a new lab protocol is developed for measuring the electrical and hydraulic conductivity of proppants. The lab setup, which mainly includes a resistivity core holder and a Hassler sleeve core holder, allows for simulation of realistic pressure and temperature conditions when making measurements. Petroleum coke (PC) is proposed as a candidate proppant because of its widespread availability and low cost. Lab measurements show that the effective electrical conductivity of pure PC in a model fracture is approximately 5000 S/m, under a closure stress greater than [Formula: see text] (4000 psi). When PC is mixed with sand, the effective electrical conductivity of the mixture decreases with an increasing weight percentage of sand. Although sand degrades the contact between PC particles, the electrical conductivity stays reasonably high (approximately 1700 S/m) when 50% sand is added. Hydraulic conductivity measurements show that when a fracture is propped with pure PC, the measured fracture conductivity is greater than [Formula: see text] ([Formula: see text]) (dimensionless fracture conductivity greater than 100 for a shale with [Formula: see text] or 100 nD permeability) under a confining pressure of [Formula: see text] (6000 psi). This means that a fracture propped with PC is infinitely conductive in a typical shale formation. When sand is added, the fracture’s hydraulic conductivity becomes even higher, which clearly shows PC’s ability of sustaining high stresses. The proposed protocol provides a robust and effective method that can be generalized for lab testing for other candidate proppants. The data presented clearly show that PC has the potential for field-scale applications in EM hydraulic fracture diagnostics.

Geochemistry & Geophysics↗
DOE OSTI2013

Recovery Act - An Interdisciplinary Program for Education and Outreach in Transportation Electrification

1) How the project adds to the education of engineering students in the area of vehicle electrification: This project created and implemented a significant interdisciplinary curriculum in HEV engineering that includes courses focused on the major components (engines, battery cells, e-machines, and power electronics). The new curriculum, rather uniquely, features two new classes and two new labs that emphasize a vehicle level integration of a hybrid electric powertrain that parallels the vehicle development process used by the OEMs - commercial grade software is used to design a hybrid electric vehicle, hardware-in-the-loop testing is performed on each component until the entire powertrain is optimized, the calibration is flashed to a vehicle, ride-and-drives are executed including on board data acquisition. In addition, nine existing courses were modified by adding HEV material to the courses. 2) The educational effectiveness and economic feasibility of the new curriculum: The new courses are offered at both the undergraduate and graduate levels. They are listed across the college in mechanical, chemical, electrical, and materials science and engineering. They are offered both on campus and to distance learning students. Students across the college of engineering and at all degree levels are integrating these courses into their degree programs. Over the three year project the course enrollments on-campus has totaled 1,249. The distance learning enrollments has totaled 315. With such robust enrollments we absolutely expect that these courses will be in the curriculum for the long run. 3) How the project is otherwise of benefit to the public: One outcome of the project is the construction of the Michigan Tech Mobile Lab. Two complete HEV dynamometer test cells, and four work stations are installed in the 16.2 meter Mobile Laboratory and hauled by a class 8 truck. The Mobile Lab is used to teach the university courses. It is also used to deliver short courses to industry, K-12 outreach, and public education. In 2012 the Mobile Lab participated in 22 outreach events, locally, throughout Michigan, and including events in Washington DC, Illinois, and Wisconsin. The Mobile Lab is a hit wherever it goes. In 2013 we will partner with the US Army TARDEC and be featured in their Green Warrior Convoy, a ten city tour starting in Detroit and finishing in Washington DC.

33 ADVANCED PROPULSION SYSTEMS↗