Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Properties of insulator interfaces with p-HgCdTe

Heat treatment at 70 C of low carrier concentration p-type HgCdTe samples (p sub o = 8 x 10 exp 14/cm) generates an inverted surface layer. A two day anneal process below 95 C did not affect the Hall coefficient, whereas an almost complete recovery was obtained by annealing at 120 C. While bulk electron mobility, obtained from PEM data, remained high (about 9 x 10 exp 4 sq cm/V s at 77 K), surface mobility is lower by more than an order of magnitude. Surface recombination velocity indicates a continuous improvement with increased temperature, and the activation energy remains equal to the vacancies energy level. The proposed mechanism is that of positive changes in the sulfide migrating towards the interface and generating an image inversion layer.

Schacham, Samuel E.↗

Evaluation plan for space station network interface units

Outlined here is a procedure for evaluating network interface units (NIUs) produced for the Space Station program. The procedures should be equally applicable to the data management system (DMS) testbed NIUs produced by Honeywell and IBM. The evaluation procedures are divided into four areas. Performance measurement tools are hardware and software that must be developed in order to evaluate NIU performance. Performance tests are a series of tests, each of which documents some specific characteristic of NIU and/or network performance. In general, these performance tests quantify the speed, capacity, latency, and reliability of message transmission under a wide variety of conditions. Functionality tests are a series of tests and code inspections that demonstrate the functionality of the particular subset of ISO protocols which have been implemented in a given NIU. Conformance tests are a series of tests which would expose whether or not selected features within the ISO protocols are present and interoperable.

Weaver, Alfred C.↗

Development of graphite/copper composites utilizing engineered interfaces

In situ measurements of graphite/copper alloy contact angles were made using the sessile drop method. The interfacial energy values obtained from these measurements were then applied to a model for the fiber matrix interfacial debonding phenomenon found in graphite/copper composites. The formation obtained from the sessile drop tests led to the development of a copper alloy that suitably wets graphite. Characterization of graphite/copper alloy interfaces subjected to elevated temperatures was conducted using Scanning Electron Microscopy, Energy Dispersive Spectroscopy, Auger Electron Spectroscopy, and X Ray Diffraction analyses. These analyses indicated that during sessile drop tests conducted at 1130 C for 1 hour, copper alloys containing greater than 0.98 at pct chromium form continuous reaction layers of approx. 10 microns in thickness. The reaction layers are adherent to the graphite surface. The copper wets the reaction layer to form a contact angle of 60 deg or less. X ray diffraction results indicate that the reaction layer is Cr3C2.

Devincent, Sandra M.↗

A general graphical user interface for automatic reliability modeling

Reported here is a general Graphical User Interface (GUI) for automatic reliability modeling of Processor Memory Switch (PMS) structures using a Markov model. This GUI is based on a hierarchy of windows. One window has graphical editing capabilities for specifying the system's communication structure, hierarchy, reconfiguration capabilities, and requirements. Other windows have field texts, popup menus, and buttons for specifying parameters and selecting actions. An example application of the GUI is given.

Liceaga, Carlos A.↗

Interface preconditionings for domain-decomposed convection-diffusion operators

The performance of five different interface preconditionings for domain-decomposed convection-diffusion problems, including a novel one known as the spectral probe is tested in a three-dimensional parameter space consisting of mesh parameters, Reynolds number, and domain aspect ratio. The preconditioners are representative of the range of practically computable possibilities that have appeared in the literature for the treatment of nonoverlapping subdomains. Numerical examples show that no single preconditioner can be considered uniformly superior or uniformly inferior to the rest, but that knowledge of the particulars of the shape and strength of the convection is important in selecting among them in a given problem.

Chan, Tony F.↗

An airborne C-band scatterometer for remote sensing the air-sea interface

An airborne C-band scatterometer system (C-Scat) has been developed for remote sensing of the air-sea interface. The sensor has been designed to fly on a number of research aircraft, beginning with the NASA Ames Research Center's C-130B, on which test flights were conducted in August of 1988. The scatterometer utilizes a 10-W solid-state power amplifier and a frequency-steered microstrip array antenna which is installed beneath the fuselage of the airplane. The antenna is electrically scanned in elevation from 20 to 50 deg off nadir, and it is mechanically rotated 360 deg in azimuth. The system is fully computer controlled and is capable of accurately measuring ocean-surface normalized radar cross section (NRCS) from altitudes as high as 25,000 feet. It has been developed to study the relationship between NRCS and ocean-surface roughness influences such as wind speed and direction, wave height and slope, and air-sea temperature difference.

Mclaughlin, D. J.↗

Space Shuttle payload trunnion interface verification test and correlation with fixed based responses

An interface verification test (IFVT) in the free-free condition was conducted to verify that the constrained modes of a mass simulator had the same frequencies as the Hubble Space Telescope, for which it was designed. Landing tests were performed in which the mass simulator was mounted on its trunnions inside a container onboard an aircraft. Its acceleration response was adequately measured, and the anticipated constrained natural frequencies based on the IFVT were confirmed. The first test updated the model to predict the fixed based modes, and the second verified the test's capacity to characterize the structure. The IFVT is shown to generate information which permits accurate modeling of the constrained structure, without requiring the traditional fixed-based modal test.

Blair, Mark A.↗

Fractal interfaces and product generation in the two-dimensional mixing layer

The dependence of product generation on Peclet and Reynolds numbers in a numerically simulated, reacting, two-dimensional, temporally growing mixing layer is related theoretically to the fractal dimension of the passive scalar interfaces. This reaction is verified using product generation measurements and fractal dimensions derived from the box counting technique. A transition from a low initial dimension to a higher one of approximately 5/3 is identified and shown to be associated to the kinematic distortion of the flow field during the first pairing interaction. It is suggested that the structures reponsible for this transition are nondeterministic, nonrandom, inhomogeneous fractals. In the range of Schmidt numbers investigated (0.25-4), only the large scales are involved. No further transitions, either in the spectra of the vorticity field or in the mixing behavior, are found for Reynolds numbers up to 90,000.

Jimenez, Javier↗

Adhesion at metal interfaces

A basic adhesion process is defined, the theory of the properties influencing metallic adhesion is outlined, and theoretical approaches to the interface problem are presented, with emphasis on first-principle calculations as well as jellium-model calculations. The computation of the energies of adhesion as a function of the interfacial separation is performed; fully three-dimensional calculations are presented, and universality in the shapes of the binding energy curves is considered. An embedded-atom method and equivalent-crystal theory are covered in the framework of issues involved in practical adhesion.

Banerjea, Amitava↗

Tire/runway friction interface

An overview is given of NASA Langley's tire/runway pavement interface studies. The National Tire Modeling Program, evaluation of new tire and landing gear designs, tire wear and friction tests, and tire hydroplaning studies are examined. The Aircraft Landing Dynamics Facility is described along with some ground friction measuring vehicles. The major goals and scope of several joint FAA/NASA programs are identified together with current status and plans.

Yager, Thomas J.↗

Universal energy relations and metal/ceramic interfaces

Known general relationships between pertinent variables are applied to investigate metal-ceramic interfaces. The adhesive energy is determined. The electronic exchange-correlation energy is found to be the dominant attractive term in the total energy. Results for the adhesive energy are obtained for junctions of all combinations of the low index surfaces of Al,Na, Mg, and Zn. This leads to a variety of curves, all with a single minimum of separation and equilibrium binding energy. Scaling results for 10 contacts fall closely onto a single curve, a universal energy relation for adhesion. The scaled chemisorption curves fall accurately on the same universal form that was found for adhesion. For the case of cohesion, all-first principle results are scaled and again all scaled curves for a variety of metals fall accurately on the universal form for adhesion and chemisorption. An intimate relationship between the energetics of solids and molecules is inferred.

Smith, John R.↗

Tapered-Fin Thermal Interfaces

Two meshing sets of tapered fins used as thermal interface with relatively low clamping forces. When in contact, fins provide large area for transfer of heat. Taper ensures easy mating and demating of fins and transfers clamping force to surfaces in contact; improving contact and transfer of heat. Fins arranged in rows, concentric rings, or other configurations.

Poulin, Elizabeth C.↗

Software Graphical User Interface For Analysis Of Images

CAMTOOL software provides graphical interface between Sun Microsystems workstation and Eikonix Model 1412 digitizing camera system. Camera scans and digitizes images, halftones, reflectives, transmissives, rigid or flexible flat material, or three-dimensional objects. Users digitize images and select from three destinations: work-station display screen, magnetic-tape drive, or hard disk. Written in C.

Leonard, Desiree M.↗

Interface For Dual-Channel MIL-STD-1553 Data Bus

Digital electronic subsystem made of commercially available programmable logic arrays and discrete logic devices serves as interface between microprocessor and dual-channel MIL-STD-1553 data bus. Subsystem consumes only 800 mW of power. Provides flexibility in that it is controllable via firmware. Includes only two reading-and-writing ports: one for status and control signals, other for transmission and reception of data.

Davies, Bryan L.↗

Human factors issues in the design of user interfaces for planning and scheduling

The purpose is to provide and overview of human factors issues that impact the effectiveness of user interfaces to automated scheduling tools. The following methods are employed: (1) a survey of planning and scheduling tools; (2) the identification and analysis of human factors issues; (3) the development of design guidelines based on human factors literature; and (4) the generation of display concepts to illustrate guidelines.

Murphy, Elizabeth D.↗

Human Machine Interfaces for Teleoperators and Virtual Environments Conference

In a teleoperator system the human operator senses, moves within, and operates upon a remote or hazardous environment by means of a slave mechanism (a mechanism often referred to as a teleoperator). In a virtual environment system the interactive human machine interface is retained but the slave mechanism and its environment are replaced by a computer simulation. Video is replaced by computer graphics. The auditory and force sensations imparted to the human operator are similarly computer generated. In contrast to a teleoperator system, where the purpose is to extend the operator's sensorimotor system in a manner that facilitates exploration and manipulation of the physical environment, in a virtual environment system, the purpose is to train, inform, alter, or study the human operator to modify the state of the computer and the information environment. A major application in which the human operator is the target is that of flight simulation. Although flight simulators have been around for more than a decade, they had little impact outside aviation presumably because the application was so specialized and so expensive.

Source record↗

Interface conditions for domain decomposition with radical grid refinement

Interface conditions for coupling the domains in a physically motivated domain decomposition method are discussed. The domain decomposition is based on an asymptotic-induced method for the numerical solution of hyperbolic conservation laws with small viscosity. The method consists of multiple stages. The first stage is to obtain a first approximation using a first-order method, such as the Godunov scheme. Subsequent stages of the method involve solving internal-layer problem via a domain decomposition. The method is derived and justified via singular perturbation techniques.

Scroggs, Jeffrey S.↗

General purpose intelligent sensor interface

The long range goal is to develop an intelligent sensor system that will simplify the design and development of expert systems that use sensors of physical phenomena as a source of input data. This phase of the research concentrated on the integration of image processing sensors with expert system environments. The anticipated result of this research is the ability to design systems in which the user will not need to be an expert in such areas as image processing algorithms, local area networks, image processor hardware selection or interfacing, or television cameras selection. The user will be able to access data from video sensors through standard expert system statements without any need to know about the sensor hardware or software.

Mckee, J. W.↗